![Darrick J. Wong](/assets/img/avatar_default.png)
This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
38 lines
1.4 KiB
Plaintext
38 lines
1.4 KiB
Plaintext
Kernel driver ibmaem
|
|
======================
|
|
|
|
Supported systems:
|
|
* Any recent IBM System X server with Active Energy Manager support.
|
|
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
|
|
x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
|
|
driver ("ipmi-si") needs to be loaded for this driver to do anything.
|
|
Prefix: 'ibmaem'
|
|
Datasheet: Not available
|
|
|
|
Author: Darrick J. Wong
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements sensor reading support for the energy and power
|
|
meters available on various IBM System X hardware through the BMC. All
|
|
sensor banks will be exported as platform devices; this driver can talk
|
|
to both v1 and v2 interfaces. This driver is completely separate from the
|
|
older ibmpex driver.
|
|
|
|
The v1 AEM interface has a simple set of features to monitor energy use.
|
|
There is a register that displays an estimate of raw energy consumption
|
|
since the last BMC reset, and a power sensor that returns average power
|
|
use over a configurable interval.
|
|
|
|
The v2 AEM interface is a bit more sophisticated, being able to present
|
|
a wider range of energy and power use registers, the power cap as
|
|
set by the AEM software, and temperature sensors.
|
|
|
|
Special Features
|
|
----------------
|
|
|
|
The "power_cap" value displays the current system power cap, as set by
|
|
the Active Energy Manager software. Setting the power cap from the host
|
|
is not currently supported.
|