![Jonathan Neuschäfer](/assets/img/avatar_default.png)
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
162 lines
5.1 KiB
ReStructuredText
162 lines
5.1 KiB
ReStructuredText
==================================================
|
|
ARM TCM (Tightly-Coupled Memory) handling in Linux
|
|
==================================================
|
|
|
|
Written by Linus Walleij <linus.walleij@stericsson.com>
|
|
|
|
Some ARM SoCs have a so-called TCM (Tightly-Coupled Memory).
|
|
This is usually just a few (4-64) KiB of RAM inside the ARM
|
|
processor.
|
|
|
|
Due to being embedded inside the CPU, the TCM has a
|
|
Harvard-architecture, so there is an ITCM (instruction TCM)
|
|
and a DTCM (data TCM). The DTCM can not contain any
|
|
instructions, but the ITCM can actually contain data.
|
|
The size of DTCM or ITCM is minimum 4KiB so the typical
|
|
minimum configuration is 4KiB ITCM and 4KiB DTCM.
|
|
|
|
ARM CPUs have special registers to read out status, physical
|
|
location and size of TCM memories. arch/arm/include/asm/cputype.h
|
|
defines a CPUID_TCM register that you can read out from the
|
|
system control coprocessor. Documentation from ARM can be found
|
|
at http://infocenter.arm.com, search for "TCM Status Register"
|
|
to see documents for all CPUs. Reading this register you can
|
|
determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
|
|
in the machine.
|
|
|
|
There is further a TCM region register (search for "TCM Region
|
|
Registers" at the ARM site) that can report and modify the location
|
|
size of TCM memories at runtime. This is used to read out and modify
|
|
TCM location and size. Notice that this is not a MMU table: you
|
|
actually move the physical location of the TCM around. At the
|
|
place you put it, it will mask any underlying RAM from the
|
|
CPU so it is usually wise not to overlap any physical RAM with
|
|
the TCM.
|
|
|
|
The TCM memory can then be remapped to another address again using
|
|
the MMU, but notice that the TCM if often used in situations where
|
|
the MMU is turned off. To avoid confusion the current Linux
|
|
implementation will map the TCM 1 to 1 from physical to virtual
|
|
memory in the location specified by the kernel. Currently Linux
|
|
will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
|
|
on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
|
|
|
|
Newer versions of the region registers also support dividing these
|
|
TCMs in two separate banks, so for example an 8KiB ITCM is divided
|
|
into two 4KiB banks with its own control registers. The idea is to
|
|
be able to lock and hide one of the banks for use by the secure
|
|
world (TrustZone).
|
|
|
|
TCM is used for a few things:
|
|
|
|
- FIQ and other interrupt handlers that need deterministic
|
|
timing and cannot wait for cache misses.
|
|
|
|
- Idle loops where all external RAM is set to self-refresh
|
|
retention mode, so only on-chip RAM is accessible by
|
|
the CPU and then we hang inside ITCM waiting for an
|
|
interrupt.
|
|
|
|
- Other operations which implies shutting off or reconfiguring
|
|
the external RAM controller.
|
|
|
|
There is an interface for using TCM on the ARM architecture
|
|
in <asm/tcm.h>. Using this interface it is possible to:
|
|
|
|
- Define the physical address and size of ITCM and DTCM.
|
|
|
|
- Tag functions to be compiled into ITCM.
|
|
|
|
- Tag data and constants to be allocated to DTCM and ITCM.
|
|
|
|
- Have the remaining TCM RAM added to a special
|
|
allocation pool with gen_pool_create() and gen_pool_add()
|
|
and provice tcm_alloc() and tcm_free() for this
|
|
memory. Such a heap is great for things like saving
|
|
device state when shutting off device power domains.
|
|
|
|
A machine that has TCM memory shall select HAVE_TCM from
|
|
arch/arm/Kconfig for itself. Code that needs to use TCM shall
|
|
#include <asm/tcm.h>
|
|
|
|
Functions to go into itcm can be tagged like this:
|
|
int __tcmfunc foo(int bar);
|
|
|
|
Since these are marked to become long_calls and you may want
|
|
to have functions called locally inside the TCM without
|
|
wasting space, there is also the __tcmlocalfunc prefix that
|
|
will make the call relative.
|
|
|
|
Variables to go into dtcm can be tagged like this::
|
|
|
|
int __tcmdata foo;
|
|
|
|
Constants can be tagged like this::
|
|
|
|
int __tcmconst foo;
|
|
|
|
To put assembler into TCM just use::
|
|
|
|
.section ".tcm.text" or .section ".tcm.data"
|
|
|
|
respectively.
|
|
|
|
Example code::
|
|
|
|
#include <asm/tcm.h>
|
|
|
|
/* Uninitialized data */
|
|
static u32 __tcmdata tcmvar;
|
|
/* Initialized data */
|
|
static u32 __tcmdata tcmassigned = 0x2BADBABEU;
|
|
/* Constant */
|
|
static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
|
|
|
|
static void __tcmlocalfunc tcm_to_tcm(void)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 100; i++)
|
|
tcmvar ++;
|
|
}
|
|
|
|
static void __tcmfunc hello_tcm(void)
|
|
{
|
|
/* Some abstract code that runs in ITCM */
|
|
int i;
|
|
for (i = 0; i < 100; i++) {
|
|
tcmvar ++;
|
|
}
|
|
tcm_to_tcm();
|
|
}
|
|
|
|
static void __init test_tcm(void)
|
|
{
|
|
u32 *tcmem;
|
|
int i;
|
|
|
|
hello_tcm();
|
|
printk("Hello TCM executed from ITCM RAM\n");
|
|
|
|
printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
|
|
tcmvar = 0xDEADBEEFU;
|
|
printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
|
|
|
|
printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
|
|
|
|
printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
|
|
|
|
/* Allocate some TCM memory from the pool */
|
|
tcmem = tcm_alloc(20);
|
|
if (tcmem) {
|
|
printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
|
|
tcmem[0] = 0xDEADBEEFU;
|
|
tcmem[1] = 0x2BADBABEU;
|
|
tcmem[2] = 0xCAFEBABEU;
|
|
tcmem[3] = 0xDEADBEEFU;
|
|
tcmem[4] = 0x2BADBABEU;
|
|
for (i = 0; i < 5; i++)
|
|
printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
|
|
tcm_free(tcmem, 20);
|
|
}
|
|
}
|