![Paul Mackerras](/assets/img/avatar_default.png)
This enables the perf_counter subsystem on 32-bit powerpc. Since we don't have any support for hardware counters on 32-bit powerpc yet, only software counters can be used. Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as 64-bit, the main thing this does is add an implementation of set_perf_counter_pending(). This needs to arrange for perf_counter_do_pending() to be called when interrupts are enabled. Rather than add code to local_irq_restore as 64-bit does, the 32-bit set_perf_counter_pending() generates an interrupt by setting the decrementer to 1 so that a decrementer interrupt will become pending in 1 or 2 timebase ticks (if a decrementer interrupt isn't already pending). When interrupts are enabled, timer_interrupt() will be called, and some new code in there calls perf_counter_do_pending(). We use a per-cpu array of flags to indicate whether we need to call perf_counter_do_pending() or not. This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT, which is selected by processor families for which we have hardware PMU support (currently only PPC64), and PPC_PERF_CTRS, which enables the powerpc-specific perf_counter back-end. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
1196 lines
32 KiB
C
1196 lines
32 KiB
C
/*
|
|
* Common time routines among all ppc machines.
|
|
*
|
|
* Written by Cort Dougan (cort@cs.nmt.edu) to merge
|
|
* Paul Mackerras' version and mine for PReP and Pmac.
|
|
* MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
|
|
* Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com)
|
|
*
|
|
* First round of bugfixes by Gabriel Paubert (paubert@iram.es)
|
|
* to make clock more stable (2.4.0-test5). The only thing
|
|
* that this code assumes is that the timebases have been synchronized
|
|
* by firmware on SMP and are never stopped (never do sleep
|
|
* on SMP then, nap and doze are OK).
|
|
*
|
|
* Speeded up do_gettimeofday by getting rid of references to
|
|
* xtime (which required locks for consistency). (mikejc@us.ibm.com)
|
|
*
|
|
* TODO (not necessarily in this file):
|
|
* - improve precision and reproducibility of timebase frequency
|
|
* measurement at boot time. (for iSeries, we calibrate the timebase
|
|
* against the Titan chip's clock.)
|
|
* - for astronomical applications: add a new function to get
|
|
* non ambiguous timestamps even around leap seconds. This needs
|
|
* a new timestamp format and a good name.
|
|
*
|
|
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
|
|
* "A Kernel Model for Precision Timekeeping" by Dave Mills
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/time.h>
|
|
#include <linux/init.h>
|
|
#include <linux/profile.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/security.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/posix-timers.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/perf_counter.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/nvram.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/time.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/div64.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/vdso_datapage.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/cputime.h>
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
#include <asm/iseries/it_lp_queue.h>
|
|
#include <asm/iseries/hv_call_xm.h>
|
|
#endif
|
|
|
|
/* powerpc clocksource/clockevent code */
|
|
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clocksource.h>
|
|
|
|
static cycle_t rtc_read(struct clocksource *);
|
|
static struct clocksource clocksource_rtc = {
|
|
.name = "rtc",
|
|
.rating = 400,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
.mask = CLOCKSOURCE_MASK(64),
|
|
.shift = 22,
|
|
.mult = 0, /* To be filled in */
|
|
.read = rtc_read,
|
|
};
|
|
|
|
static cycle_t timebase_read(struct clocksource *);
|
|
static struct clocksource clocksource_timebase = {
|
|
.name = "timebase",
|
|
.rating = 400,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
.mask = CLOCKSOURCE_MASK(64),
|
|
.shift = 22,
|
|
.mult = 0, /* To be filled in */
|
|
.read = timebase_read,
|
|
};
|
|
|
|
#define DECREMENTER_MAX 0x7fffffff
|
|
|
|
static int decrementer_set_next_event(unsigned long evt,
|
|
struct clock_event_device *dev);
|
|
static void decrementer_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *dev);
|
|
|
|
static struct clock_event_device decrementer_clockevent = {
|
|
.name = "decrementer",
|
|
.rating = 200,
|
|
.shift = 0, /* To be filled in */
|
|
.mult = 0, /* To be filled in */
|
|
.irq = 0,
|
|
.set_next_event = decrementer_set_next_event,
|
|
.set_mode = decrementer_set_mode,
|
|
.features = CLOCK_EVT_FEAT_ONESHOT,
|
|
};
|
|
|
|
struct decrementer_clock {
|
|
struct clock_event_device event;
|
|
u64 next_tb;
|
|
};
|
|
|
|
static DEFINE_PER_CPU(struct decrementer_clock, decrementers);
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
static unsigned long __initdata iSeries_recal_titan;
|
|
static signed long __initdata iSeries_recal_tb;
|
|
|
|
/* Forward declaration is only needed for iSereis compiles */
|
|
static void __init clocksource_init(void);
|
|
#endif
|
|
|
|
#define XSEC_PER_SEC (1024*1024)
|
|
|
|
#ifdef CONFIG_PPC64
|
|
#define SCALE_XSEC(xsec, max) (((xsec) * max) / XSEC_PER_SEC)
|
|
#else
|
|
/* compute ((xsec << 12) * max) >> 32 */
|
|
#define SCALE_XSEC(xsec, max) mulhwu((xsec) << 12, max)
|
|
#endif
|
|
|
|
unsigned long tb_ticks_per_jiffy;
|
|
unsigned long tb_ticks_per_usec = 100; /* sane default */
|
|
EXPORT_SYMBOL(tb_ticks_per_usec);
|
|
unsigned long tb_ticks_per_sec;
|
|
EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */
|
|
u64 tb_to_xs;
|
|
unsigned tb_to_us;
|
|
|
|
#define TICKLEN_SCALE NTP_SCALE_SHIFT
|
|
static u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */
|
|
static u64 ticklen_to_xs; /* 0.64 fraction */
|
|
|
|
/* If last_tick_len corresponds to about 1/HZ seconds, then
|
|
last_tick_len << TICKLEN_SHIFT will be about 2^63. */
|
|
#define TICKLEN_SHIFT (63 - 30 - TICKLEN_SCALE + SHIFT_HZ)
|
|
|
|
DEFINE_SPINLOCK(rtc_lock);
|
|
EXPORT_SYMBOL_GPL(rtc_lock);
|
|
|
|
static u64 tb_to_ns_scale __read_mostly;
|
|
static unsigned tb_to_ns_shift __read_mostly;
|
|
static unsigned long boot_tb __read_mostly;
|
|
|
|
extern struct timezone sys_tz;
|
|
static long timezone_offset;
|
|
|
|
unsigned long ppc_proc_freq;
|
|
EXPORT_SYMBOL(ppc_proc_freq);
|
|
unsigned long ppc_tb_freq;
|
|
|
|
static u64 tb_last_jiffy __cacheline_aligned_in_smp;
|
|
static DEFINE_PER_CPU(u64, last_jiffy);
|
|
|
|
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
|
|
/*
|
|
* Factors for converting from cputime_t (timebase ticks) to
|
|
* jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds).
|
|
* These are all stored as 0.64 fixed-point binary fractions.
|
|
*/
|
|
u64 __cputime_jiffies_factor;
|
|
EXPORT_SYMBOL(__cputime_jiffies_factor);
|
|
u64 __cputime_msec_factor;
|
|
EXPORT_SYMBOL(__cputime_msec_factor);
|
|
u64 __cputime_sec_factor;
|
|
EXPORT_SYMBOL(__cputime_sec_factor);
|
|
u64 __cputime_clockt_factor;
|
|
EXPORT_SYMBOL(__cputime_clockt_factor);
|
|
DEFINE_PER_CPU(unsigned long, cputime_last_delta);
|
|
DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta);
|
|
|
|
static void calc_cputime_factors(void)
|
|
{
|
|
struct div_result res;
|
|
|
|
div128_by_32(HZ, 0, tb_ticks_per_sec, &res);
|
|
__cputime_jiffies_factor = res.result_low;
|
|
div128_by_32(1000, 0, tb_ticks_per_sec, &res);
|
|
__cputime_msec_factor = res.result_low;
|
|
div128_by_32(1, 0, tb_ticks_per_sec, &res);
|
|
__cputime_sec_factor = res.result_low;
|
|
div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res);
|
|
__cputime_clockt_factor = res.result_low;
|
|
}
|
|
|
|
/*
|
|
* Read the PURR on systems that have it, otherwise the timebase.
|
|
*/
|
|
static u64 read_purr(void)
|
|
{
|
|
if (cpu_has_feature(CPU_FTR_PURR))
|
|
return mfspr(SPRN_PURR);
|
|
return mftb();
|
|
}
|
|
|
|
/*
|
|
* Read the SPURR on systems that have it, otherwise the purr
|
|
*/
|
|
static u64 read_spurr(u64 purr)
|
|
{
|
|
/*
|
|
* cpus without PURR won't have a SPURR
|
|
* We already know the former when we use this, so tell gcc
|
|
*/
|
|
if (cpu_has_feature(CPU_FTR_PURR) && cpu_has_feature(CPU_FTR_SPURR))
|
|
return mfspr(SPRN_SPURR);
|
|
return purr;
|
|
}
|
|
|
|
/*
|
|
* Account time for a transition between system, hard irq
|
|
* or soft irq state.
|
|
*/
|
|
void account_system_vtime(struct task_struct *tsk)
|
|
{
|
|
u64 now, nowscaled, delta, deltascaled, sys_time;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
now = read_purr();
|
|
nowscaled = read_spurr(now);
|
|
delta = now - get_paca()->startpurr;
|
|
deltascaled = nowscaled - get_paca()->startspurr;
|
|
get_paca()->startpurr = now;
|
|
get_paca()->startspurr = nowscaled;
|
|
if (!in_interrupt()) {
|
|
/* deltascaled includes both user and system time.
|
|
* Hence scale it based on the purr ratio to estimate
|
|
* the system time */
|
|
sys_time = get_paca()->system_time;
|
|
if (get_paca()->user_time)
|
|
deltascaled = deltascaled * sys_time /
|
|
(sys_time + get_paca()->user_time);
|
|
delta += sys_time;
|
|
get_paca()->system_time = 0;
|
|
}
|
|
if (in_irq() || idle_task(smp_processor_id()) != tsk)
|
|
account_system_time(tsk, 0, delta, deltascaled);
|
|
else
|
|
account_idle_time(delta);
|
|
per_cpu(cputime_last_delta, smp_processor_id()) = delta;
|
|
per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled;
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* Transfer the user and system times accumulated in the paca
|
|
* by the exception entry and exit code to the generic process
|
|
* user and system time records.
|
|
* Must be called with interrupts disabled.
|
|
*/
|
|
void account_process_tick(struct task_struct *tsk, int user_tick)
|
|
{
|
|
cputime_t utime, utimescaled;
|
|
|
|
utime = get_paca()->user_time;
|
|
get_paca()->user_time = 0;
|
|
utimescaled = cputime_to_scaled(utime);
|
|
account_user_time(tsk, utime, utimescaled);
|
|
}
|
|
|
|
/*
|
|
* Stuff for accounting stolen time.
|
|
*/
|
|
struct cpu_purr_data {
|
|
int initialized; /* thread is running */
|
|
u64 tb; /* last TB value read */
|
|
u64 purr; /* last PURR value read */
|
|
u64 spurr; /* last SPURR value read */
|
|
};
|
|
|
|
/*
|
|
* Each entry in the cpu_purr_data array is manipulated only by its
|
|
* "owner" cpu -- usually in the timer interrupt but also occasionally
|
|
* in process context for cpu online. As long as cpus do not touch
|
|
* each others' cpu_purr_data, disabling local interrupts is
|
|
* sufficient to serialize accesses.
|
|
*/
|
|
static DEFINE_PER_CPU(struct cpu_purr_data, cpu_purr_data);
|
|
|
|
static void snapshot_tb_and_purr(void *data)
|
|
{
|
|
unsigned long flags;
|
|
struct cpu_purr_data *p = &__get_cpu_var(cpu_purr_data);
|
|
|
|
local_irq_save(flags);
|
|
p->tb = get_tb_or_rtc();
|
|
p->purr = mfspr(SPRN_PURR);
|
|
wmb();
|
|
p->initialized = 1;
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* Called during boot when all cpus have come up.
|
|
*/
|
|
void snapshot_timebases(void)
|
|
{
|
|
if (!cpu_has_feature(CPU_FTR_PURR))
|
|
return;
|
|
on_each_cpu(snapshot_tb_and_purr, NULL, 1);
|
|
}
|
|
|
|
/*
|
|
* Must be called with interrupts disabled.
|
|
*/
|
|
void calculate_steal_time(void)
|
|
{
|
|
u64 tb, purr;
|
|
s64 stolen;
|
|
struct cpu_purr_data *pme;
|
|
|
|
pme = &__get_cpu_var(cpu_purr_data);
|
|
if (!pme->initialized)
|
|
return; /* !CPU_FTR_PURR or early in early boot */
|
|
tb = mftb();
|
|
purr = mfspr(SPRN_PURR);
|
|
stolen = (tb - pme->tb) - (purr - pme->purr);
|
|
if (stolen > 0) {
|
|
if (idle_task(smp_processor_id()) != current)
|
|
account_steal_time(stolen);
|
|
else
|
|
account_idle_time(stolen);
|
|
}
|
|
pme->tb = tb;
|
|
pme->purr = purr;
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_SPLPAR
|
|
/*
|
|
* Must be called before the cpu is added to the online map when
|
|
* a cpu is being brought up at runtime.
|
|
*/
|
|
static void snapshot_purr(void)
|
|
{
|
|
struct cpu_purr_data *pme;
|
|
unsigned long flags;
|
|
|
|
if (!cpu_has_feature(CPU_FTR_PURR))
|
|
return;
|
|
local_irq_save(flags);
|
|
pme = &__get_cpu_var(cpu_purr_data);
|
|
pme->tb = mftb();
|
|
pme->purr = mfspr(SPRN_PURR);
|
|
pme->initialized = 1;
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
#endif /* CONFIG_PPC_SPLPAR */
|
|
|
|
#else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
|
|
#define calc_cputime_factors()
|
|
#define calculate_steal_time() do { } while (0)
|
|
#endif
|
|
|
|
#if !(defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR))
|
|
#define snapshot_purr() do { } while (0)
|
|
#endif
|
|
|
|
/*
|
|
* Called when a cpu comes up after the system has finished booting,
|
|
* i.e. as a result of a hotplug cpu action.
|
|
*/
|
|
void snapshot_timebase(void)
|
|
{
|
|
__get_cpu_var(last_jiffy) = get_tb_or_rtc();
|
|
snapshot_purr();
|
|
}
|
|
|
|
void __delay(unsigned long loops)
|
|
{
|
|
unsigned long start;
|
|
int diff;
|
|
|
|
if (__USE_RTC()) {
|
|
start = get_rtcl();
|
|
do {
|
|
/* the RTCL register wraps at 1000000000 */
|
|
diff = get_rtcl() - start;
|
|
if (diff < 0)
|
|
diff += 1000000000;
|
|
} while (diff < loops);
|
|
} else {
|
|
start = get_tbl();
|
|
while (get_tbl() - start < loops)
|
|
HMT_low();
|
|
HMT_medium();
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(__delay);
|
|
|
|
void udelay(unsigned long usecs)
|
|
{
|
|
__delay(tb_ticks_per_usec * usecs);
|
|
}
|
|
EXPORT_SYMBOL(udelay);
|
|
|
|
static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
|
|
u64 new_tb_to_xs)
|
|
{
|
|
/*
|
|
* tb_update_count is used to allow the userspace gettimeofday code
|
|
* to assure itself that it sees a consistent view of the tb_to_xs and
|
|
* stamp_xsec variables. It reads the tb_update_count, then reads
|
|
* tb_to_xs and stamp_xsec and then reads tb_update_count again. If
|
|
* the two values of tb_update_count match and are even then the
|
|
* tb_to_xs and stamp_xsec values are consistent. If not, then it
|
|
* loops back and reads them again until this criteria is met.
|
|
* We expect the caller to have done the first increment of
|
|
* vdso_data->tb_update_count already.
|
|
*/
|
|
vdso_data->tb_orig_stamp = new_tb_stamp;
|
|
vdso_data->stamp_xsec = new_stamp_xsec;
|
|
vdso_data->tb_to_xs = new_tb_to_xs;
|
|
vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
|
|
vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
|
|
vdso_data->stamp_xtime = xtime;
|
|
smp_wmb();
|
|
++(vdso_data->tb_update_count);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
unsigned long profile_pc(struct pt_regs *regs)
|
|
{
|
|
unsigned long pc = instruction_pointer(regs);
|
|
|
|
if (in_lock_functions(pc))
|
|
return regs->link;
|
|
|
|
return pc;
|
|
}
|
|
EXPORT_SYMBOL(profile_pc);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
|
|
/*
|
|
* This function recalibrates the timebase based on the 49-bit time-of-day
|
|
* value in the Titan chip. The Titan is much more accurate than the value
|
|
* returned by the service processor for the timebase frequency.
|
|
*/
|
|
|
|
static int __init iSeries_tb_recal(void)
|
|
{
|
|
struct div_result divres;
|
|
unsigned long titan, tb;
|
|
|
|
/* Make sure we only run on iSeries */
|
|
if (!firmware_has_feature(FW_FEATURE_ISERIES))
|
|
return -ENODEV;
|
|
|
|
tb = get_tb();
|
|
titan = HvCallXm_loadTod();
|
|
if ( iSeries_recal_titan ) {
|
|
unsigned long tb_ticks = tb - iSeries_recal_tb;
|
|
unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
|
|
unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec;
|
|
unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
|
|
long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
|
|
char sign = '+';
|
|
/* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
|
|
new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ;
|
|
|
|
if ( tick_diff < 0 ) {
|
|
tick_diff = -tick_diff;
|
|
sign = '-';
|
|
}
|
|
if ( tick_diff ) {
|
|
if ( tick_diff < tb_ticks_per_jiffy/25 ) {
|
|
printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n",
|
|
new_tb_ticks_per_jiffy, sign, tick_diff );
|
|
tb_ticks_per_jiffy = new_tb_ticks_per_jiffy;
|
|
tb_ticks_per_sec = new_tb_ticks_per_sec;
|
|
calc_cputime_factors();
|
|
div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
|
|
tb_to_xs = divres.result_low;
|
|
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
|
|
vdso_data->tb_to_xs = tb_to_xs;
|
|
}
|
|
else {
|
|
printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
|
|
" new tb_ticks_per_jiffy = %lu\n"
|
|
" old tb_ticks_per_jiffy = %lu\n",
|
|
new_tb_ticks_per_jiffy, tb_ticks_per_jiffy );
|
|
}
|
|
}
|
|
}
|
|
iSeries_recal_titan = titan;
|
|
iSeries_recal_tb = tb;
|
|
|
|
/* Called here as now we know accurate values for the timebase */
|
|
clocksource_init();
|
|
return 0;
|
|
}
|
|
late_initcall(iSeries_tb_recal);
|
|
|
|
/* Called from platform early init */
|
|
void __init iSeries_time_init_early(void)
|
|
{
|
|
iSeries_recal_tb = get_tb();
|
|
iSeries_recal_titan = HvCallXm_loadTod();
|
|
}
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
|
|
#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32)
|
|
DEFINE_PER_CPU(u8, perf_counter_pending);
|
|
|
|
void set_perf_counter_pending(void)
|
|
{
|
|
get_cpu_var(perf_counter_pending) = 1;
|
|
set_dec(1);
|
|
put_cpu_var(perf_counter_pending);
|
|
}
|
|
|
|
#define test_perf_counter_pending() __get_cpu_var(perf_counter_pending)
|
|
#define clear_perf_counter_pending() __get_cpu_var(perf_counter_pending) = 0
|
|
|
|
#else /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */
|
|
|
|
#define test_perf_counter_pending() 0
|
|
#define clear_perf_counter_pending()
|
|
|
|
#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */
|
|
|
|
/*
|
|
* For iSeries shared processors, we have to let the hypervisor
|
|
* set the hardware decrementer. We set a virtual decrementer
|
|
* in the lppaca and call the hypervisor if the virtual
|
|
* decrementer is less than the current value in the hardware
|
|
* decrementer. (almost always the new decrementer value will
|
|
* be greater than the current hardware decementer so the hypervisor
|
|
* call will not be needed)
|
|
*/
|
|
|
|
/*
|
|
* timer_interrupt - gets called when the decrementer overflows,
|
|
* with interrupts disabled.
|
|
*/
|
|
void timer_interrupt(struct pt_regs * regs)
|
|
{
|
|
struct pt_regs *old_regs;
|
|
struct decrementer_clock *decrementer = &__get_cpu_var(decrementers);
|
|
struct clock_event_device *evt = &decrementer->event;
|
|
u64 now;
|
|
|
|
/* Ensure a positive value is written to the decrementer, or else
|
|
* some CPUs will continuue to take decrementer exceptions */
|
|
set_dec(DECREMENTER_MAX);
|
|
|
|
#ifdef CONFIG_PPC32
|
|
if (test_perf_counter_pending()) {
|
|
clear_perf_counter_pending();
|
|
perf_counter_do_pending();
|
|
}
|
|
if (atomic_read(&ppc_n_lost_interrupts) != 0)
|
|
do_IRQ(regs);
|
|
#endif
|
|
|
|
now = get_tb_or_rtc();
|
|
if (now < decrementer->next_tb) {
|
|
/* not time for this event yet */
|
|
now = decrementer->next_tb - now;
|
|
if (now <= DECREMENTER_MAX)
|
|
set_dec((int)now);
|
|
return;
|
|
}
|
|
old_regs = set_irq_regs(regs);
|
|
irq_enter();
|
|
|
|
calculate_steal_time();
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
if (firmware_has_feature(FW_FEATURE_ISERIES))
|
|
get_lppaca()->int_dword.fields.decr_int = 0;
|
|
#endif
|
|
|
|
if (evt->event_handler)
|
|
evt->event_handler(evt);
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())
|
|
process_hvlpevents();
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC64
|
|
/* collect purr register values often, for accurate calculations */
|
|
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
|
|
struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
|
|
cu->current_tb = mfspr(SPRN_PURR);
|
|
}
|
|
#endif
|
|
|
|
irq_exit();
|
|
set_irq_regs(old_regs);
|
|
}
|
|
|
|
void wakeup_decrementer(void)
|
|
{
|
|
unsigned long ticks;
|
|
|
|
/*
|
|
* The timebase gets saved on sleep and restored on wakeup,
|
|
* so all we need to do is to reset the decrementer.
|
|
*/
|
|
ticks = tb_ticks_since(__get_cpu_var(last_jiffy));
|
|
if (ticks < tb_ticks_per_jiffy)
|
|
ticks = tb_ticks_per_jiffy - ticks;
|
|
else
|
|
ticks = 1;
|
|
set_dec(ticks);
|
|
}
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
void generic_suspend_disable_irqs(void)
|
|
{
|
|
preempt_disable();
|
|
|
|
/* Disable the decrementer, so that it doesn't interfere
|
|
* with suspending.
|
|
*/
|
|
|
|
set_dec(0x7fffffff);
|
|
local_irq_disable();
|
|
set_dec(0x7fffffff);
|
|
}
|
|
|
|
void generic_suspend_enable_irqs(void)
|
|
{
|
|
wakeup_decrementer();
|
|
|
|
local_irq_enable();
|
|
preempt_enable();
|
|
}
|
|
|
|
/* Overrides the weak version in kernel/power/main.c */
|
|
void arch_suspend_disable_irqs(void)
|
|
{
|
|
if (ppc_md.suspend_disable_irqs)
|
|
ppc_md.suspend_disable_irqs();
|
|
generic_suspend_disable_irqs();
|
|
}
|
|
|
|
/* Overrides the weak version in kernel/power/main.c */
|
|
void arch_suspend_enable_irqs(void)
|
|
{
|
|
generic_suspend_enable_irqs();
|
|
if (ppc_md.suspend_enable_irqs)
|
|
ppc_md.suspend_enable_irqs();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
|
void __init smp_space_timers(unsigned int max_cpus)
|
|
{
|
|
int i;
|
|
u64 previous_tb = per_cpu(last_jiffy, boot_cpuid);
|
|
|
|
/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
|
|
previous_tb -= tb_ticks_per_jiffy;
|
|
|
|
for_each_possible_cpu(i) {
|
|
if (i == boot_cpuid)
|
|
continue;
|
|
per_cpu(last_jiffy, i) = previous_tb;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Scheduler clock - returns current time in nanosec units.
|
|
*
|
|
* Note: mulhdu(a, b) (multiply high double unsigned) returns
|
|
* the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b
|
|
* are 64-bit unsigned numbers.
|
|
*/
|
|
unsigned long long sched_clock(void)
|
|
{
|
|
if (__USE_RTC())
|
|
return get_rtc();
|
|
return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift;
|
|
}
|
|
|
|
static int __init get_freq(char *name, int cells, unsigned long *val)
|
|
{
|
|
struct device_node *cpu;
|
|
const unsigned int *fp;
|
|
int found = 0;
|
|
|
|
/* The cpu node should have timebase and clock frequency properties */
|
|
cpu = of_find_node_by_type(NULL, "cpu");
|
|
|
|
if (cpu) {
|
|
fp = of_get_property(cpu, name, NULL);
|
|
if (fp) {
|
|
found = 1;
|
|
*val = of_read_ulong(fp, cells);
|
|
}
|
|
|
|
of_node_put(cpu);
|
|
}
|
|
|
|
return found;
|
|
}
|
|
|
|
void __init generic_calibrate_decr(void)
|
|
{
|
|
ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
|
|
|
|
if (!get_freq("ibm,extended-timebase-frequency", 2, &ppc_tb_freq) &&
|
|
!get_freq("timebase-frequency", 1, &ppc_tb_freq)) {
|
|
|
|
printk(KERN_ERR "WARNING: Estimating decrementer frequency "
|
|
"(not found)\n");
|
|
}
|
|
|
|
ppc_proc_freq = DEFAULT_PROC_FREQ; /* hardcoded default */
|
|
|
|
if (!get_freq("ibm,extended-clock-frequency", 2, &ppc_proc_freq) &&
|
|
!get_freq("clock-frequency", 1, &ppc_proc_freq)) {
|
|
|
|
printk(KERN_ERR "WARNING: Estimating processor frequency "
|
|
"(not found)\n");
|
|
}
|
|
|
|
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
|
|
/* Clear any pending timer interrupts */
|
|
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
|
|
|
|
/* Enable decrementer interrupt */
|
|
mtspr(SPRN_TCR, TCR_DIE);
|
|
#endif
|
|
}
|
|
|
|
int update_persistent_clock(struct timespec now)
|
|
{
|
|
struct rtc_time tm;
|
|
|
|
if (!ppc_md.set_rtc_time)
|
|
return 0;
|
|
|
|
to_tm(now.tv_sec + 1 + timezone_offset, &tm);
|
|
tm.tm_year -= 1900;
|
|
tm.tm_mon -= 1;
|
|
|
|
return ppc_md.set_rtc_time(&tm);
|
|
}
|
|
|
|
unsigned long read_persistent_clock(void)
|
|
{
|
|
struct rtc_time tm;
|
|
static int first = 1;
|
|
|
|
/* XXX this is a litle fragile but will work okay in the short term */
|
|
if (first) {
|
|
first = 0;
|
|
if (ppc_md.time_init)
|
|
timezone_offset = ppc_md.time_init();
|
|
|
|
/* get_boot_time() isn't guaranteed to be safe to call late */
|
|
if (ppc_md.get_boot_time)
|
|
return ppc_md.get_boot_time() -timezone_offset;
|
|
}
|
|
if (!ppc_md.get_rtc_time)
|
|
return 0;
|
|
ppc_md.get_rtc_time(&tm);
|
|
return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
|
|
tm.tm_hour, tm.tm_min, tm.tm_sec);
|
|
}
|
|
|
|
/* clocksource code */
|
|
static cycle_t rtc_read(struct clocksource *cs)
|
|
{
|
|
return (cycle_t)get_rtc();
|
|
}
|
|
|
|
static cycle_t timebase_read(struct clocksource *cs)
|
|
{
|
|
return (cycle_t)get_tb();
|
|
}
|
|
|
|
void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
|
|
{
|
|
u64 t2x, stamp_xsec;
|
|
|
|
if (clock != &clocksource_timebase)
|
|
return;
|
|
|
|
/* Make userspace gettimeofday spin until we're done. */
|
|
++vdso_data->tb_update_count;
|
|
smp_mb();
|
|
|
|
/* XXX this assumes clock->shift == 22 */
|
|
/* 4611686018 ~= 2^(20+64-22) / 1e9 */
|
|
t2x = (u64) clock->mult * 4611686018ULL;
|
|
stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
|
|
do_div(stamp_xsec, 1000000000);
|
|
stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
|
|
update_gtod(clock->cycle_last, stamp_xsec, t2x);
|
|
}
|
|
|
|
void update_vsyscall_tz(void)
|
|
{
|
|
/* Make userspace gettimeofday spin until we're done. */
|
|
++vdso_data->tb_update_count;
|
|
smp_mb();
|
|
vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
|
|
vdso_data->tz_dsttime = sys_tz.tz_dsttime;
|
|
smp_mb();
|
|
++vdso_data->tb_update_count;
|
|
}
|
|
|
|
static void __init clocksource_init(void)
|
|
{
|
|
struct clocksource *clock;
|
|
|
|
if (__USE_RTC())
|
|
clock = &clocksource_rtc;
|
|
else
|
|
clock = &clocksource_timebase;
|
|
|
|
clock->mult = clocksource_hz2mult(tb_ticks_per_sec, clock->shift);
|
|
|
|
if (clocksource_register(clock)) {
|
|
printk(KERN_ERR "clocksource: %s is already registered\n",
|
|
clock->name);
|
|
return;
|
|
}
|
|
|
|
printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
|
|
clock->name, clock->mult, clock->shift);
|
|
}
|
|
|
|
static int decrementer_set_next_event(unsigned long evt,
|
|
struct clock_event_device *dev)
|
|
{
|
|
__get_cpu_var(decrementers).next_tb = get_tb_or_rtc() + evt;
|
|
set_dec(evt);
|
|
return 0;
|
|
}
|
|
|
|
static void decrementer_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *dev)
|
|
{
|
|
if (mode != CLOCK_EVT_MODE_ONESHOT)
|
|
decrementer_set_next_event(DECREMENTER_MAX, dev);
|
|
}
|
|
|
|
static void __init setup_clockevent_multiplier(unsigned long hz)
|
|
{
|
|
u64 mult, shift = 32;
|
|
|
|
while (1) {
|
|
mult = div_sc(hz, NSEC_PER_SEC, shift);
|
|
if (mult && (mult >> 32UL) == 0UL)
|
|
break;
|
|
|
|
shift--;
|
|
}
|
|
|
|
decrementer_clockevent.shift = shift;
|
|
decrementer_clockevent.mult = mult;
|
|
}
|
|
|
|
static void register_decrementer_clockevent(int cpu)
|
|
{
|
|
struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
|
|
|
|
*dec = decrementer_clockevent;
|
|
dec->cpumask = cpumask_of(cpu);
|
|
|
|
printk(KERN_DEBUG "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n",
|
|
dec->name, dec->mult, dec->shift, cpu);
|
|
|
|
clockevents_register_device(dec);
|
|
}
|
|
|
|
static void __init init_decrementer_clockevent(void)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
|
|
setup_clockevent_multiplier(ppc_tb_freq);
|
|
decrementer_clockevent.max_delta_ns =
|
|
clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
|
|
decrementer_clockevent.min_delta_ns =
|
|
clockevent_delta2ns(2, &decrementer_clockevent);
|
|
|
|
register_decrementer_clockevent(cpu);
|
|
}
|
|
|
|
void secondary_cpu_time_init(void)
|
|
{
|
|
/* FIME: Should make unrelatred change to move snapshot_timebase
|
|
* call here ! */
|
|
register_decrementer_clockevent(smp_processor_id());
|
|
}
|
|
|
|
/* This function is only called on the boot processor */
|
|
void __init time_init(void)
|
|
{
|
|
unsigned long flags;
|
|
struct div_result res;
|
|
u64 scale, x;
|
|
unsigned shift;
|
|
|
|
if (__USE_RTC()) {
|
|
/* 601 processor: dec counts down by 128 every 128ns */
|
|
ppc_tb_freq = 1000000000;
|
|
tb_last_jiffy = get_rtcl();
|
|
} else {
|
|
/* Normal PowerPC with timebase register */
|
|
ppc_md.calibrate_decr();
|
|
printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
|
|
ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
|
|
printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
|
|
ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
|
|
tb_last_jiffy = get_tb();
|
|
}
|
|
|
|
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
|
|
tb_ticks_per_sec = ppc_tb_freq;
|
|
tb_ticks_per_usec = ppc_tb_freq / 1000000;
|
|
tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
|
|
calc_cputime_factors();
|
|
|
|
/*
|
|
* Calculate the length of each tick in ns. It will not be
|
|
* exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ.
|
|
* We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq,
|
|
* rounded up.
|
|
*/
|
|
x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1;
|
|
do_div(x, ppc_tb_freq);
|
|
tick_nsec = x;
|
|
last_tick_len = x << TICKLEN_SCALE;
|
|
|
|
/*
|
|
* Compute ticklen_to_xs, which is a factor which gets multiplied
|
|
* by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value.
|
|
* It is computed as:
|
|
* ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
|
|
* where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
|
|
* which turns out to be N = 51 - SHIFT_HZ.
|
|
* This gives the result as a 0.64 fixed-point fraction.
|
|
* That value is reduced by an offset amounting to 1 xsec per
|
|
* 2^31 timebase ticks to avoid problems with time going backwards
|
|
* by 1 xsec when we do timer_recalc_offset due to losing the
|
|
* fractional xsec. That offset is equal to ppc_tb_freq/2^51
|
|
* since there are 2^20 xsec in a second.
|
|
*/
|
|
div128_by_32((1ULL << 51) - ppc_tb_freq, 0,
|
|
tb_ticks_per_jiffy << SHIFT_HZ, &res);
|
|
div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
|
|
ticklen_to_xs = res.result_low;
|
|
|
|
/* Compute tb_to_xs from tick_nsec */
|
|
tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs);
|
|
|
|
/*
|
|
* Compute scale factor for sched_clock.
|
|
* The calibrate_decr() function has set tb_ticks_per_sec,
|
|
* which is the timebase frequency.
|
|
* We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret
|
|
* the 128-bit result as a 64.64 fixed-point number.
|
|
* We then shift that number right until it is less than 1.0,
|
|
* giving us the scale factor and shift count to use in
|
|
* sched_clock().
|
|
*/
|
|
div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
|
|
scale = res.result_low;
|
|
for (shift = 0; res.result_high != 0; ++shift) {
|
|
scale = (scale >> 1) | (res.result_high << 63);
|
|
res.result_high >>= 1;
|
|
}
|
|
tb_to_ns_scale = scale;
|
|
tb_to_ns_shift = shift;
|
|
/* Save the current timebase to pretty up CONFIG_PRINTK_TIME */
|
|
boot_tb = get_tb_or_rtc();
|
|
|
|
write_seqlock_irqsave(&xtime_lock, flags);
|
|
|
|
/* If platform provided a timezone (pmac), we correct the time */
|
|
if (timezone_offset) {
|
|
sys_tz.tz_minuteswest = -timezone_offset / 60;
|
|
sys_tz.tz_dsttime = 0;
|
|
}
|
|
|
|
vdso_data->tb_orig_stamp = tb_last_jiffy;
|
|
vdso_data->tb_update_count = 0;
|
|
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
|
|
vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
|
|
vdso_data->tb_to_xs = tb_to_xs;
|
|
|
|
write_sequnlock_irqrestore(&xtime_lock, flags);
|
|
|
|
/* Register the clocksource, if we're not running on iSeries */
|
|
if (!firmware_has_feature(FW_FEATURE_ISERIES))
|
|
clocksource_init();
|
|
|
|
init_decrementer_clockevent();
|
|
}
|
|
|
|
|
|
#define FEBRUARY 2
|
|
#define STARTOFTIME 1970
|
|
#define SECDAY 86400L
|
|
#define SECYR (SECDAY * 365)
|
|
#define leapyear(year) ((year) % 4 == 0 && \
|
|
((year) % 100 != 0 || (year) % 400 == 0))
|
|
#define days_in_year(a) (leapyear(a) ? 366 : 365)
|
|
#define days_in_month(a) (month_days[(a) - 1])
|
|
|
|
static int month_days[12] = {
|
|
31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
|
|
};
|
|
|
|
/*
|
|
* This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
|
|
*/
|
|
void GregorianDay(struct rtc_time * tm)
|
|
{
|
|
int leapsToDate;
|
|
int lastYear;
|
|
int day;
|
|
int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
|
|
|
|
lastYear = tm->tm_year - 1;
|
|
|
|
/*
|
|
* Number of leap corrections to apply up to end of last year
|
|
*/
|
|
leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
|
|
|
|
/*
|
|
* This year is a leap year if it is divisible by 4 except when it is
|
|
* divisible by 100 unless it is divisible by 400
|
|
*
|
|
* e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
|
|
*/
|
|
day = tm->tm_mon > 2 && leapyear(tm->tm_year);
|
|
|
|
day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
|
|
tm->tm_mday;
|
|
|
|
tm->tm_wday = day % 7;
|
|
}
|
|
|
|
void to_tm(int tim, struct rtc_time * tm)
|
|
{
|
|
register int i;
|
|
register long hms, day;
|
|
|
|
day = tim / SECDAY;
|
|
hms = tim % SECDAY;
|
|
|
|
/* Hours, minutes, seconds are easy */
|
|
tm->tm_hour = hms / 3600;
|
|
tm->tm_min = (hms % 3600) / 60;
|
|
tm->tm_sec = (hms % 3600) % 60;
|
|
|
|
/* Number of years in days */
|
|
for (i = STARTOFTIME; day >= days_in_year(i); i++)
|
|
day -= days_in_year(i);
|
|
tm->tm_year = i;
|
|
|
|
/* Number of months in days left */
|
|
if (leapyear(tm->tm_year))
|
|
days_in_month(FEBRUARY) = 29;
|
|
for (i = 1; day >= days_in_month(i); i++)
|
|
day -= days_in_month(i);
|
|
days_in_month(FEBRUARY) = 28;
|
|
tm->tm_mon = i;
|
|
|
|
/* Days are what is left over (+1) from all that. */
|
|
tm->tm_mday = day + 1;
|
|
|
|
/*
|
|
* Determine the day of week
|
|
*/
|
|
GregorianDay(tm);
|
|
}
|
|
|
|
/* Auxiliary function to compute scaling factors */
|
|
/* Actually the choice of a timebase running at 1/4 the of the bus
|
|
* frequency giving resolution of a few tens of nanoseconds is quite nice.
|
|
* It makes this computation very precise (27-28 bits typically) which
|
|
* is optimistic considering the stability of most processor clock
|
|
* oscillators and the precision with which the timebase frequency
|
|
* is measured but does not harm.
|
|
*/
|
|
unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale)
|
|
{
|
|
unsigned mlt=0, tmp, err;
|
|
/* No concern for performance, it's done once: use a stupid
|
|
* but safe and compact method to find the multiplier.
|
|
*/
|
|
|
|
for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
|
|
if (mulhwu(inscale, mlt|tmp) < outscale)
|
|
mlt |= tmp;
|
|
}
|
|
|
|
/* We might still be off by 1 for the best approximation.
|
|
* A side effect of this is that if outscale is too large
|
|
* the returned value will be zero.
|
|
* Many corner cases have been checked and seem to work,
|
|
* some might have been forgotten in the test however.
|
|
*/
|
|
|
|
err = inscale * (mlt+1);
|
|
if (err <= inscale/2)
|
|
mlt++;
|
|
return mlt;
|
|
}
|
|
|
|
/*
|
|
* Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
|
|
* result.
|
|
*/
|
|
void div128_by_32(u64 dividend_high, u64 dividend_low,
|
|
unsigned divisor, struct div_result *dr)
|
|
{
|
|
unsigned long a, b, c, d;
|
|
unsigned long w, x, y, z;
|
|
u64 ra, rb, rc;
|
|
|
|
a = dividend_high >> 32;
|
|
b = dividend_high & 0xffffffff;
|
|
c = dividend_low >> 32;
|
|
d = dividend_low & 0xffffffff;
|
|
|
|
w = a / divisor;
|
|
ra = ((u64)(a - (w * divisor)) << 32) + b;
|
|
|
|
rb = ((u64) do_div(ra, divisor) << 32) + c;
|
|
x = ra;
|
|
|
|
rc = ((u64) do_div(rb, divisor) << 32) + d;
|
|
y = rb;
|
|
|
|
do_div(rc, divisor);
|
|
z = rc;
|
|
|
|
dr->result_high = ((u64)w << 32) + x;
|
|
dr->result_low = ((u64)y << 32) + z;
|
|
|
|
}
|
|
|
|
/* We don't need to calibrate delay, we use the CPU timebase for that */
|
|
void calibrate_delay(void)
|
|
{
|
|
/* Some generic code (such as spinlock debug) use loops_per_jiffy
|
|
* as the number of __delay(1) in a jiffy, so make it so
|
|
*/
|
|
loops_per_jiffy = tb_ticks_per_jiffy;
|
|
}
|
|
|
|
static int __init rtc_init(void)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
if (!ppc_md.get_rtc_time)
|
|
return -ENODEV;
|
|
|
|
pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_init(rtc_init);
|