1
0
Fork 0
alistair23-linux/drivers/staging/wlags49_h2/wl_if.h

222 lines
7.3 KiB
C
Raw Blame History

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

/*******************************************************************************
* Agere Systems Inc.
* Wireless device driver for Linux (wlags49).
*
* Copyright (c) 1998-2003 Agere Systems Inc.
* All rights reserved.
* http://www.agere.com
*
* Initially developed by TriplePoint, Inc.
* http://www.triplepoint.com
*
*------------------------------------------------------------------------------
*
* Driver common header for info needed by driver source and user-space
* processes communicating with the driver.
*
*------------------------------------------------------------------------------
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software. Using this
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
* Copyright © 2003 Agere Systems Inc.
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following Disclaimer as comments in the code as
* well as in the documentation and/or other materials provided with the
* distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following Disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
******************************************************************************/
#ifndef __WAVELAN2_IF_H__
#define __WAVELAN2_IF_H__
/*******************************************************************************
* constant definitions
******************************************************************************/
#define MAX_LTV_BUF_SIZE (512 - (sizeof(hcf_16) * 2))
#define HCF_TALLIES_SIZE (sizeof(CFG_HERMES_TALLIES_STRCT) + \
(sizeof(hcf_16) * 2))
#define HCF_MAX_MULTICAST 16
#define HCF_MAX_NAME_LEN 32
#define MAX_LINE_SIZE 256
#define HCF_NUM_IO_PORTS 0x80
#define TX_TIMEOUT ((800 * HZ) / 1000)
/* PE1DNN
* Better data from the real world. Not scientific but empirical data gathered
* from a Thomson Speedtouch 110 which is identified as:
* PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110"
* Manufacture ID: 0156,0003
* Lowest measurment for noise floor seen is value 54
* Highest signal strength in close proximity to the AP seen is value 118
* Very good must be around 100 (otherwise its never "full scale"
* All other constants are derrived from these. This makes the signal gauge
* work for me...
*/
#define HCF_MIN_SIGNAL_LEVEL 54
#define HCF_MAX_SIGNAL_LEVEL 100
#define HCF_MIN_NOISE_LEVEL HCF_MIN_SIGNAL_LEVEL
#define HCF_MAX_NOISE_LEVEL HCF_MAX_SIGNAL_LEVEL
#define HCF_0DBM_OFFSET (HCF_MAX_SIGNAL_LEVEL + 1)
#define HCF_MIN_COMM_QUALITY 0
#define HCF_MAX_COMM_QUALITY (HCF_MAX_SIGNAL_LEVEL - \
HCF_MIN_NOISE_LEVEL + 1)
/* For encryption (WEP) */
#define MIN_KEY_SIZE 5 /* 40 bits RC4 - WEP */
#define MAX_KEY_SIZE 13 /* 104 bits */
#define MAX_KEYS 4
#define RADIO_CHANNELS 14
#define RADIO_SENSITIVITY_LEVELS 3
#define RADIO_TX_POWER_MWATT 32
#define RADIO_TX_POWER_DBM 15
#define MIN_RTS_BYTES 0
#define MAX_RTS_BYTES 2347
#define MAX_RATES 8
#define MEGABIT (1024 * 1024)
#define HCF_FAILURE 0xFF
#define UIL_FAILURE 0xFF
#define CFG_UIL_CONNECT 0xA123 /* Define differently? */
#define CFG_UIL_CONNECT_ACK_CODE 0x5653435A /* VSCZ */
#define WVLAN2_UIL_CONNECTED (0x01L << 0)
#define WVLAN2_UIL_BUSY (0x01L << 1)
/*******************************************************************************
* driver ioctl interface
******************************************************************************/
#define WVLAN2_IOCTL_UIL SIOCDEVPRIVATE
/* The UIL Interface used in conjunction with the WVLAN2_IOCTL_UIL code above
is defined in mdd.h. A quick reference of the UIL codes is listed below */
/*
UIL_FUN_CONNECT
UIL_FUN_DISCONNECT
UIL_FUN_ACTION
UIL_ACT_BLOCK
UIL_ACT_UNBLOCK
UIL_ACT_SCA
UIL_ACT_DIAG
UIL_ACT_APPLY
UIL_FUN_SEND_DIAG_MSG
UIL_FUN_GET_INFO
UIL_FUN_PUT_INFO
*/
#define SIOCSIWNETNAME (SIOCDEVPRIVATE + 1)
#define SIOCGIWNETNAME (SIOCDEVPRIVATE + 2)
#define SIOCSIWSTANAME (SIOCDEVPRIVATE + 3)
#define SIOCGIWSTANAME (SIOCDEVPRIVATE + 4)
#define SIOCSIWPORTTYPE (SIOCDEVPRIVATE + 5)
#define SIOCGIWPORTTYPE (SIOCDEVPRIVATE + 6)
/* IOCTL code for the RTS interface */
#define WL_IOCTL_RTS (SIOCDEVPRIVATE + 7)
/* IOCTL subcodes for WL_IOCTL_RTS */
#define WL_IOCTL_RTS_READ 1
#define WL_IOCTL_RTS_WRITE 2
#define WL_IOCTL_RTS_BATCH_READ 3
#define WL_IOCTL_RTS_BATCH_WRITE 4
/*******************************************************************************
* STRUCTURE DEFINITIONS
******************************************************************************/
typedef struct {
__u16 length;
__u8 name[HCF_MAX_NAME_LEN];
}
wvName_t;
typedef struct {
hcf_16 len;
hcf_16 typ;
union {
hcf_8 u8[MAX_LTV_BUF_SIZE / sizeof(hcf_8)];
hcf_16 u16[MAX_LTV_BUF_SIZE / sizeof(hcf_16)];
hcf_32 u32[MAX_LTV_BUF_SIZE / sizeof(hcf_32)];
} u;
}
ltv_t;
struct uilreq {
union {
char ifrn_name[IFNAMSIZ];
} ifr_ifrn;
IFBP hcfCtx;
__u8 command;
__u8 result;
/* The data field in this structure is typically an LTV of some type.
The len field is the size of the buffer in bytes, as opposed to words
(like the L-field in the LTV */
__u16 len;
void *data;
};
struct rtsreq {
union {
char ifrn_name[IFNAMSIZ];
}
ifr_ifrn;
__u16 typ;
__u16 reg;
__u16 len;
__u16 *data;
};
#endif /* __WAVELAN2_IF_H__ */