![Ralf Baechle DL5RB](/assets/img/avatar_default.png)
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2187 lines
54 KiB
C
2187 lines
54 KiB
C
#define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $"
|
|
|
|
#define VERSION "3.0"
|
|
|
|
/*
|
|
* Please use z8530drv-utils-3.0 with this version.
|
|
* ------------------
|
|
*
|
|
* You can find a subset of the documentation in
|
|
* Documentation/networking/z8530drv.txt.
|
|
*/
|
|
|
|
/*
|
|
********************************************************************
|
|
* SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 *
|
|
********************************************************************
|
|
|
|
|
|
********************************************************************
|
|
|
|
Copyright (c) 1993, 2000 Joerg Reuter DL1BKE
|
|
|
|
portions (c) 1993 Guido ten Dolle PE1NNZ
|
|
|
|
********************************************************************
|
|
|
|
The driver and the programs in the archive are UNDER CONSTRUCTION.
|
|
The code is likely to fail, and so your kernel could --- even
|
|
a whole network.
|
|
|
|
This driver is intended for Amateur Radio use. If you are running it
|
|
for commercial purposes, please drop me a note. I am nosy...
|
|
|
|
...BUT:
|
|
|
|
! You m u s t recognize the appropriate legislations of your country !
|
|
! before you connect a radio to the SCC board and start to transmit or !
|
|
! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! !
|
|
|
|
For non-Amateur-Radio use please note that you might need a special
|
|
allowance/licence from the designer of the SCC Board and/or the
|
|
MODEM.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the (modified) GNU General Public License
|
|
delivered with the Linux kernel source.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should find a copy of the GNU General Public License in
|
|
/usr/src/linux/COPYING;
|
|
|
|
********************************************************************
|
|
|
|
|
|
Incomplete history of z8530drv:
|
|
-------------------------------
|
|
|
|
1994-09-13 started to write the driver, rescued most of my own
|
|
code (and Hans Alblas' memory buffer pool concept) from
|
|
an earlier project "sccdrv" which was initiated by
|
|
Guido ten Dolle. Not much of the old driver survived,
|
|
though. The first version I put my hands on was sccdrv1.3
|
|
from August 1993. The memory buffer pool concept
|
|
appeared in an unauthorized sccdrv version (1.5) from
|
|
August 1994.
|
|
|
|
1995-01-31 changed copyright notice to GPL without limitations.
|
|
|
|
.
|
|
. <SNIP>
|
|
.
|
|
|
|
1996-10-05 New semester, new driver...
|
|
|
|
* KISS TNC emulator removed (TTY driver)
|
|
* Source moved to drivers/net/
|
|
* Includes Z8530 defines from drivers/net/z8530.h
|
|
* Uses sk_buffer memory management
|
|
* Reduced overhead of /proc/net/z8530drv output
|
|
* Streamlined quite a lot things
|
|
* Invents brand new bugs... ;-)
|
|
|
|
The move to version number 3.0 reflects theses changes.
|
|
You can use 'kissbridge' if you need a KISS TNC emulator.
|
|
|
|
1996-12-13 Fixed for Linux networking changes. (G4KLX)
|
|
1997-01-08 Fixed the remaining problems.
|
|
1997-04-02 Hopefully fixed the problems with the new *_timer()
|
|
routines, added calibration code.
|
|
1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO
|
|
1998-01-29 Small fix to avoid lock-up on initialization
|
|
1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again,
|
|
using dev->tx_queue_len now instead of MAXQUEUE now.
|
|
1998-10-21 Postponed the spinlock changes, would need a lot of
|
|
testing I currently don't have the time to. Softdcd doesn't
|
|
work.
|
|
1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it
|
|
never did. The DPLL locks on noise, the SYNC unit sees
|
|
flags that aren't... Restarting the DPLL does not help
|
|
either, it resynchronizes too slow and the first received
|
|
frame gets lost.
|
|
2000-02-13 Fixed for new network driver interface changes, still
|
|
does TX timeouts itself since it uses its own queue
|
|
scheme.
|
|
|
|
Thanks to all who contributed to this driver with ideas and bug
|
|
reports!
|
|
|
|
NB -- if you find errors, change something, please let me know
|
|
first before you distribute it... And please don't touch
|
|
the version number. Just replace my callsign in
|
|
"v3.0.dl1bke" with your own. Just to avoid confusion...
|
|
|
|
If you want to add your modification to the linux distribution
|
|
please (!) contact me first.
|
|
|
|
New versions of the driver will be announced on the linux-hams
|
|
mailing list on vger.kernel.org. To subscribe send an e-mail
|
|
to majordomo@vger.kernel.org with the following line in
|
|
the body of the mail:
|
|
|
|
subscribe linux-hams
|
|
|
|
The content of the "Subject" field will be ignored.
|
|
|
|
vy 73,
|
|
Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org
|
|
AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU
|
|
Internet: jreuter@yaina.de
|
|
www : http://yaina.de/jreuter
|
|
*/
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#undef SCC_LDELAY /* slow it even a bit more down */
|
|
#undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */
|
|
|
|
#define SCC_MAXCHIPS 4 /* number of max. supported chips */
|
|
#define SCC_BUFSIZE 384 /* must not exceed 4096 */
|
|
#undef SCC_DEBUG
|
|
|
|
#define SCC_DEFAULT_CLOCK 4915200
|
|
/* default pclock if nothing is specified */
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/string.h>
|
|
#include <linux/in.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/socket.h>
|
|
#include <linux/init.h>
|
|
#include <linux/scc.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <net/ax25.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "z8530.h"
|
|
|
|
static char banner[] __initdata = KERN_INFO "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n";
|
|
|
|
static void t_dwait(unsigned long);
|
|
static void t_txdelay(unsigned long);
|
|
static void t_tail(unsigned long);
|
|
static void t_busy(unsigned long);
|
|
static void t_maxkeyup(unsigned long);
|
|
static void t_idle(unsigned long);
|
|
static void scc_tx_done(struct scc_channel *);
|
|
static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long);
|
|
static void scc_start_maxkeyup(struct scc_channel *);
|
|
static void scc_start_defer(struct scc_channel *);
|
|
|
|
static void z8530_init(void);
|
|
|
|
static void init_channel(struct scc_channel *scc);
|
|
static void scc_key_trx (struct scc_channel *scc, char tx);
|
|
static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs);
|
|
static void scc_init_timer(struct scc_channel *scc);
|
|
|
|
static int scc_net_alloc(const char *name, struct scc_channel *scc);
|
|
static void scc_net_setup(struct net_device *dev);
|
|
static int scc_net_open(struct net_device *dev);
|
|
static int scc_net_close(struct net_device *dev);
|
|
static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
|
|
static int scc_net_tx(struct sk_buff *skb, struct net_device *dev);
|
|
static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
|
|
static int scc_net_set_mac_address(struct net_device *dev, void *addr);
|
|
static struct net_device_stats * scc_net_get_stats(struct net_device *dev);
|
|
|
|
static unsigned char SCC_DriverName[] = "scc";
|
|
|
|
static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS];
|
|
|
|
static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */
|
|
|
|
static struct scc_ctrl {
|
|
io_port chan_A;
|
|
io_port chan_B;
|
|
int irq;
|
|
} SCC_ctrl[SCC_MAXCHIPS+1];
|
|
|
|
static unsigned char Driver_Initialized;
|
|
static int Nchips;
|
|
static io_port Vector_Latch;
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * Port Access Functions * */
|
|
/* ******************************************************************** */
|
|
|
|
/* These provide interrupt save 2-step access to the Z8530 registers */
|
|
|
|
static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */
|
|
|
|
static inline unsigned char InReg(io_port port, unsigned char reg)
|
|
{
|
|
unsigned long flags;
|
|
unsigned char r;
|
|
|
|
spin_lock_irqsave(&iolock, flags);
|
|
#ifdef SCC_LDELAY
|
|
Outb(port, reg);
|
|
udelay(SCC_LDELAY);
|
|
r=Inb(port);
|
|
udelay(SCC_LDELAY);
|
|
#else
|
|
Outb(port, reg);
|
|
r=Inb(port);
|
|
#endif
|
|
spin_unlock_irqrestore(&iolock, flags);
|
|
return r;
|
|
}
|
|
|
|
static inline void OutReg(io_port port, unsigned char reg, unsigned char val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&iolock, flags);
|
|
#ifdef SCC_LDELAY
|
|
Outb(port, reg); udelay(SCC_LDELAY);
|
|
Outb(port, val); udelay(SCC_LDELAY);
|
|
#else
|
|
Outb(port, reg);
|
|
Outb(port, val);
|
|
#endif
|
|
spin_unlock_irqrestore(&iolock, flags);
|
|
}
|
|
|
|
static inline void wr(struct scc_channel *scc, unsigned char reg,
|
|
unsigned char val)
|
|
{
|
|
OutReg(scc->ctrl, reg, (scc->wreg[reg] = val));
|
|
}
|
|
|
|
static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val)
|
|
{
|
|
OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val));
|
|
}
|
|
|
|
static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val)
|
|
{
|
|
OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val));
|
|
}
|
|
|
|
/* ******************************************************************** */
|
|
/* * Some useful macros * */
|
|
/* ******************************************************************** */
|
|
|
|
static inline void scc_discard_buffers(struct scc_channel *scc)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
if (scc->tx_buff != NULL)
|
|
{
|
|
dev_kfree_skb(scc->tx_buff);
|
|
scc->tx_buff = NULL;
|
|
}
|
|
|
|
while (!skb_queue_empty(&scc->tx_queue))
|
|
dev_kfree_skb(skb_dequeue(&scc->tx_queue));
|
|
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * Interrupt Service Routines * */
|
|
/* ******************************************************************** */
|
|
|
|
|
|
/* ----> subroutines for the interrupt handlers <---- */
|
|
|
|
static inline void scc_notify(struct scc_channel *scc, int event)
|
|
{
|
|
struct sk_buff *skb;
|
|
char *bp;
|
|
|
|
if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA)
|
|
return;
|
|
|
|
skb = dev_alloc_skb(2);
|
|
if (skb != NULL)
|
|
{
|
|
bp = skb_put(skb, 2);
|
|
*bp++ = PARAM_HWEVENT;
|
|
*bp++ = event;
|
|
scc_net_rx(scc, skb);
|
|
} else
|
|
scc->stat.nospace++;
|
|
}
|
|
|
|
static inline void flush_rx_FIFO(struct scc_channel *scc)
|
|
{
|
|
int k;
|
|
|
|
for (k=0; k<3; k++)
|
|
Inb(scc->data);
|
|
|
|
if(scc->rx_buff != NULL) /* did we receive something? */
|
|
{
|
|
scc->stat.rxerrs++; /* then count it as an error */
|
|
dev_kfree_skb_irq(scc->rx_buff);
|
|
scc->rx_buff = NULL;
|
|
}
|
|
}
|
|
|
|
static void start_hunt(struct scc_channel *scc)
|
|
{
|
|
if ((scc->modem.clocksrc != CLK_EXTERNAL))
|
|
OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
|
|
or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */
|
|
}
|
|
|
|
/* ----> four different interrupt handlers for Tx, Rx, changing of */
|
|
/* DCD/CTS and Rx/Tx errors */
|
|
|
|
/* Transmitter interrupt handler */
|
|
static inline void scc_txint(struct scc_channel *scc)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
scc->stat.txints++;
|
|
skb = scc->tx_buff;
|
|
|
|
/* send first octet */
|
|
|
|
if (skb == NULL)
|
|
{
|
|
skb = skb_dequeue(&scc->tx_queue);
|
|
scc->tx_buff = skb;
|
|
netif_wake_queue(scc->dev);
|
|
|
|
if (skb == NULL)
|
|
{
|
|
scc_tx_done(scc);
|
|
Outb(scc->ctrl, RES_Tx_P);
|
|
return;
|
|
}
|
|
|
|
if (skb->len == 0) /* Paranoia... */
|
|
{
|
|
dev_kfree_skb_irq(skb);
|
|
scc->tx_buff = NULL;
|
|
scc_tx_done(scc);
|
|
Outb(scc->ctrl, RES_Tx_P);
|
|
return;
|
|
}
|
|
|
|
scc->stat.tx_state = TXS_ACTIVE;
|
|
|
|
OutReg(scc->ctrl, R0, RES_Tx_CRC);
|
|
/* reset CRC generator */
|
|
or(scc,R10,ABUNDER); /* re-install underrun protection */
|
|
Outb(scc->data,*skb->data); /* send byte */
|
|
skb_pull(skb, 1);
|
|
|
|
if (!scc->enhanced) /* reset EOM latch */
|
|
Outb(scc->ctrl,RES_EOM_L);
|
|
return;
|
|
}
|
|
|
|
/* End Of Frame... */
|
|
|
|
if (skb->len == 0)
|
|
{
|
|
Outb(scc->ctrl, RES_Tx_P); /* reset pending int */
|
|
cl(scc, R10, ABUNDER); /* send CRC */
|
|
dev_kfree_skb_irq(skb);
|
|
scc->tx_buff = NULL;
|
|
scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */
|
|
return;
|
|
}
|
|
|
|
/* send octet */
|
|
|
|
Outb(scc->data,*skb->data);
|
|
skb_pull(skb, 1);
|
|
}
|
|
|
|
|
|
/* External/Status interrupt handler */
|
|
static inline void scc_exint(struct scc_channel *scc)
|
|
{
|
|
unsigned char status,changes,chg_and_stat;
|
|
|
|
scc->stat.exints++;
|
|
|
|
status = InReg(scc->ctrl,R0);
|
|
changes = status ^ scc->status;
|
|
chg_and_stat = changes & status;
|
|
|
|
/* ABORT: generated whenever DCD drops while receiving */
|
|
|
|
if (chg_and_stat & BRK_ABRT) /* Received an ABORT */
|
|
flush_rx_FIFO(scc);
|
|
|
|
/* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */
|
|
|
|
if ((changes & SYNC_HUNT) && scc->kiss.softdcd)
|
|
{
|
|
if (status & SYNC_HUNT)
|
|
{
|
|
scc->dcd = 0;
|
|
flush_rx_FIFO(scc);
|
|
if ((scc->modem.clocksrc != CLK_EXTERNAL))
|
|
OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
|
|
} else {
|
|
scc->dcd = 1;
|
|
}
|
|
|
|
scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON);
|
|
}
|
|
|
|
/* DCD: on = start to receive packet, off = ABORT condition */
|
|
/* (a successfully received packet generates a special condition int) */
|
|
|
|
if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */
|
|
{
|
|
if(status & DCD) /* DCD is now ON */
|
|
{
|
|
start_hunt(scc);
|
|
scc->dcd = 1;
|
|
} else { /* DCD is now OFF */
|
|
cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */
|
|
flush_rx_FIFO(scc);
|
|
scc->dcd = 0;
|
|
}
|
|
|
|
scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
|
|
}
|
|
|
|
#ifdef notdef
|
|
/* CTS: use external TxDelay (what's that good for?!)
|
|
* Anyway: If we _could_ use it (BayCom USCC uses CTS for
|
|
* own purposes) we _should_ use the "autoenable" feature
|
|
* of the Z8530 and not this interrupt...
|
|
*/
|
|
|
|
if (chg_and_stat & CTS) /* CTS is now ON */
|
|
{
|
|
if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */
|
|
scc_start_tx_timer(scc, t_txdelay, 0);
|
|
}
|
|
#endif
|
|
|
|
if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM))
|
|
{
|
|
scc->stat.tx_under++; /* oops, an underrun! count 'em */
|
|
Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */
|
|
|
|
if (scc->tx_buff != NULL)
|
|
{
|
|
dev_kfree_skb_irq(scc->tx_buff);
|
|
scc->tx_buff = NULL;
|
|
}
|
|
|
|
or(scc,R10,ABUNDER);
|
|
scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */
|
|
}
|
|
|
|
scc->status = status;
|
|
Outb(scc->ctrl,RES_EXT_INT);
|
|
}
|
|
|
|
|
|
/* Receiver interrupt handler */
|
|
static inline void scc_rxint(struct scc_channel *scc)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
scc->stat.rxints++;
|
|
|
|
if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF)
|
|
{
|
|
Inb(scc->data); /* discard char */
|
|
or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
|
|
return;
|
|
}
|
|
|
|
skb = scc->rx_buff;
|
|
|
|
if (skb == NULL)
|
|
{
|
|
skb = dev_alloc_skb(scc->stat.bufsize);
|
|
if (skb == NULL)
|
|
{
|
|
scc->dev_stat.rx_dropped++;
|
|
scc->stat.nospace++;
|
|
Inb(scc->data);
|
|
or(scc, R3, ENT_HM);
|
|
return;
|
|
}
|
|
|
|
scc->rx_buff = skb;
|
|
*(skb_put(skb, 1)) = 0; /* KISS data */
|
|
}
|
|
|
|
if (skb->len >= scc->stat.bufsize)
|
|
{
|
|
#ifdef notdef
|
|
printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n");
|
|
#endif
|
|
dev_kfree_skb_irq(skb);
|
|
scc->rx_buff = NULL;
|
|
Inb(scc->data);
|
|
or(scc, R3, ENT_HM);
|
|
return;
|
|
}
|
|
|
|
*(skb_put(skb, 1)) = Inb(scc->data);
|
|
}
|
|
|
|
|
|
/* Receive Special Condition interrupt handler */
|
|
static inline void scc_spint(struct scc_channel *scc)
|
|
{
|
|
unsigned char status;
|
|
struct sk_buff *skb;
|
|
|
|
scc->stat.spints++;
|
|
|
|
status = InReg(scc->ctrl,R1); /* read receiver status */
|
|
|
|
Inb(scc->data); /* throw away Rx byte */
|
|
skb = scc->rx_buff;
|
|
|
|
if(status & Rx_OVR) /* receiver overrun */
|
|
{
|
|
scc->stat.rx_over++; /* count them */
|
|
or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
|
|
|
|
if (skb != NULL)
|
|
dev_kfree_skb_irq(skb);
|
|
scc->rx_buff = skb = NULL;
|
|
}
|
|
|
|
if(status & END_FR && skb != NULL) /* end of frame */
|
|
{
|
|
/* CRC okay, frame ends on 8 bit boundary and received something ? */
|
|
|
|
if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0)
|
|
{
|
|
/* ignore last received byte (first of the CRC bytes) */
|
|
skb_trim(skb, skb->len-1);
|
|
scc_net_rx(scc, skb);
|
|
scc->rx_buff = NULL;
|
|
scc->stat.rxframes++;
|
|
} else { /* a bad frame */
|
|
dev_kfree_skb_irq(skb);
|
|
scc->rx_buff = NULL;
|
|
scc->stat.rxerrs++;
|
|
}
|
|
}
|
|
|
|
Outb(scc->ctrl,ERR_RES);
|
|
}
|
|
|
|
|
|
/* ----> interrupt service routine for the Z8530 <---- */
|
|
|
|
static void scc_isr_dispatch(struct scc_channel *scc, int vector)
|
|
{
|
|
spin_lock(&scc->lock);
|
|
switch (vector & VECTOR_MASK)
|
|
{
|
|
case TXINT: scc_txint(scc); break;
|
|
case EXINT: scc_exint(scc); break;
|
|
case RXINT: scc_rxint(scc); break;
|
|
case SPINT: scc_spint(scc); break;
|
|
}
|
|
spin_unlock(&scc->lock);
|
|
}
|
|
|
|
/* If the card has a latch for the interrupt vector (like the PA0HZP card)
|
|
use it to get the number of the chip that generated the int.
|
|
If not: poll all defined chips.
|
|
*/
|
|
|
|
#define SCC_IRQTIMEOUT 30000
|
|
|
|
static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
unsigned char vector;
|
|
struct scc_channel *scc;
|
|
struct scc_ctrl *ctrl;
|
|
int k;
|
|
|
|
if (Vector_Latch)
|
|
{
|
|
for(k=0; k < SCC_IRQTIMEOUT; k++)
|
|
{
|
|
Outb(Vector_Latch, 0); /* Generate INTACK */
|
|
|
|
/* Read the vector */
|
|
if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break;
|
|
if (vector & 0x01) break;
|
|
|
|
scc=&SCC_Info[vector >> 3 ^ 0x01];
|
|
if (!scc->dev) break;
|
|
|
|
scc_isr_dispatch(scc, vector);
|
|
|
|
OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */
|
|
}
|
|
|
|
if (k == SCC_IRQTIMEOUT)
|
|
printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Find the SCC generating the interrupt by polling all attached SCCs
|
|
* reading RR3A (the interrupt pending register)
|
|
*/
|
|
|
|
ctrl = SCC_ctrl;
|
|
while (ctrl->chan_A)
|
|
{
|
|
if (ctrl->irq != irq)
|
|
{
|
|
ctrl++;
|
|
continue;
|
|
}
|
|
|
|
scc = NULL;
|
|
for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++)
|
|
{
|
|
vector=InReg(ctrl->chan_B,R2); /* Read the vector */
|
|
if (vector & 0x01) break;
|
|
|
|
scc = &SCC_Info[vector >> 3 ^ 0x01];
|
|
if (!scc->dev) break;
|
|
|
|
scc_isr_dispatch(scc, vector);
|
|
}
|
|
|
|
if (k == SCC_IRQTIMEOUT)
|
|
{
|
|
printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n");
|
|
break;
|
|
}
|
|
|
|
/* This looks weird and it is. At least the BayCom USCC doesn't
|
|
* use the Interrupt Daisy Chain, thus we'll have to start
|
|
* all over again to be sure not to miss an interrupt from
|
|
* (any of) the other chip(s)...
|
|
* Honestly, the situation *is* braindamaged...
|
|
*/
|
|
|
|
if (scc != NULL)
|
|
{
|
|
OutReg(scc->ctrl,R0,RES_H_IUS);
|
|
ctrl = SCC_ctrl;
|
|
} else
|
|
ctrl++;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * Init Channel */
|
|
/* ******************************************************************** */
|
|
|
|
|
|
/* ----> set SCC channel speed <---- */
|
|
|
|
static inline void set_brg(struct scc_channel *scc, unsigned int tc)
|
|
{
|
|
cl(scc,R14,BRENABL); /* disable baudrate generator */
|
|
wr(scc,R12,tc & 255); /* brg rate LOW */
|
|
wr(scc,R13,tc >> 8); /* brg rate HIGH */
|
|
or(scc,R14,BRENABL); /* enable baudrate generator */
|
|
}
|
|
|
|
static inline void set_speed(struct scc_channel *scc)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
|
|
if (scc->modem.speed > 0) /* paranoia... */
|
|
set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2);
|
|
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
|
|
/* ----> initialize a SCC channel <---- */
|
|
|
|
static inline void init_brg(struct scc_channel *scc)
|
|
{
|
|
wr(scc, R14, BRSRC); /* BRG source = PCLK */
|
|
OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */
|
|
OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */
|
|
}
|
|
|
|
/*
|
|
* Initialization according to the Z8530 manual (SGS-Thomson's version):
|
|
*
|
|
* 1. Modes and constants
|
|
*
|
|
* WR9 11000000 chip reset
|
|
* WR4 XXXXXXXX Tx/Rx control, async or sync mode
|
|
* WR1 0XX00X00 select W/REQ (optional)
|
|
* WR2 XXXXXXXX program interrupt vector
|
|
* WR3 XXXXXXX0 select Rx control
|
|
* WR5 XXXX0XXX select Tx control
|
|
* WR6 XXXXXXXX sync character
|
|
* WR7 XXXXXXXX sync character
|
|
* WR9 000X0XXX select interrupt control
|
|
* WR10 XXXXXXXX miscellaneous control (optional)
|
|
* WR11 XXXXXXXX clock control
|
|
* WR12 XXXXXXXX time constant lower byte (optional)
|
|
* WR13 XXXXXXXX time constant upper byte (optional)
|
|
* WR14 XXXXXXX0 miscellaneous control
|
|
* WR14 XXXSSSSS commands (optional)
|
|
*
|
|
* 2. Enables
|
|
*
|
|
* WR14 000SSSS1 baud rate enable
|
|
* WR3 SSSSSSS1 Rx enable
|
|
* WR5 SSSS1SSS Tx enable
|
|
* WR0 10000000 reset Tx CRG (optional)
|
|
* WR1 XSS00S00 DMA enable (optional)
|
|
*
|
|
* 3. Interrupt status
|
|
*
|
|
* WR15 XXXXXXXX enable external/status
|
|
* WR0 00010000 reset external status
|
|
* WR0 00010000 reset external status twice
|
|
* WR1 SSSXXSXX enable Rx, Tx and Ext/status
|
|
* WR9 000SXSSS enable master interrupt enable
|
|
*
|
|
* 1 = set to one, 0 = reset to zero
|
|
* X = user defined, S = same as previous init
|
|
*
|
|
*
|
|
* Note that the implementation differs in some points from above scheme.
|
|
*
|
|
*/
|
|
|
|
static void init_channel(struct scc_channel *scc)
|
|
{
|
|
del_timer(&scc->tx_t);
|
|
del_timer(&scc->tx_wdog);
|
|
|
|
disable_irq(scc->irq);
|
|
|
|
wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */
|
|
wr(scc,R1,0); /* no W/REQ operation */
|
|
wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */
|
|
wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */
|
|
wr(scc,R6,0); /* SDLC address zero (not used) */
|
|
wr(scc,R7,FLAG); /* SDLC flag value */
|
|
wr(scc,R9,VIS); /* vector includes status */
|
|
wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */
|
|
wr(scc,R14, 0);
|
|
|
|
|
|
/* set clock sources:
|
|
|
|
CLK_DPLL: normal halfduplex operation
|
|
|
|
RxClk: use DPLL
|
|
TxClk: use DPLL
|
|
TRxC mode DPLL output
|
|
|
|
CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem)
|
|
|
|
BayCom: others:
|
|
|
|
TxClk = pin RTxC TxClk = pin TRxC
|
|
RxClk = pin TRxC RxClk = pin RTxC
|
|
|
|
|
|
CLK_DIVIDER:
|
|
RxClk = use DPLL
|
|
TxClk = pin RTxC
|
|
|
|
BayCom: others:
|
|
pin TRxC = DPLL pin TRxC = BRG
|
|
(RxClk * 1) (RxClk * 32)
|
|
*/
|
|
|
|
|
|
switch(scc->modem.clocksrc)
|
|
{
|
|
case CLK_DPLL:
|
|
wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
|
|
init_brg(scc);
|
|
break;
|
|
|
|
case CLK_DIVIDER:
|
|
wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI);
|
|
init_brg(scc);
|
|
break;
|
|
|
|
case CLK_EXTERNAL:
|
|
wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP);
|
|
OutReg(scc->ctrl, R14, DISDPLL);
|
|
break;
|
|
|
|
}
|
|
|
|
set_speed(scc); /* set baudrate */
|
|
|
|
if(scc->enhanced)
|
|
{
|
|
or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */
|
|
wr(scc,R7,AUTOEOM);
|
|
}
|
|
|
|
if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD))
|
|
/* DCD is now ON */
|
|
{
|
|
start_hunt(scc);
|
|
}
|
|
|
|
/* enable ABORT, DCD & SYNC/HUNT interrupts */
|
|
|
|
wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE));
|
|
|
|
Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
|
|
Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */
|
|
|
|
or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */
|
|
|
|
scc->status = InReg(scc->ctrl,R0); /* read initial status */
|
|
|
|
or(scc,R9,MIE); /* master interrupt enable */
|
|
|
|
scc_init_timer(scc);
|
|
|
|
enable_irq(scc->irq);
|
|
}
|
|
|
|
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * SCC timer functions * */
|
|
/* ******************************************************************** */
|
|
|
|
|
|
/* ----> scc_key_trx sets the time constant for the baudrate
|
|
generator and keys the transmitter <---- */
|
|
|
|
static void scc_key_trx(struct scc_channel *scc, char tx)
|
|
{
|
|
unsigned int time_const;
|
|
|
|
if (scc->brand & PRIMUS)
|
|
Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0));
|
|
|
|
if (scc->modem.speed < 300)
|
|
scc->modem.speed = 1200;
|
|
|
|
time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2;
|
|
|
|
disable_irq(scc->irq);
|
|
|
|
if (tx)
|
|
{
|
|
or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */
|
|
or(scc, R15, TxUIE);
|
|
}
|
|
|
|
if (scc->modem.clocksrc == CLK_DPLL)
|
|
{ /* force simplex operation */
|
|
if (tx)
|
|
{
|
|
#ifdef CONFIG_SCC_TRXECHO
|
|
cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */
|
|
cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */
|
|
#endif
|
|
set_brg(scc, time_const); /* reprogram baudrate generator */
|
|
|
|
/* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */
|
|
wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR);
|
|
|
|
/* By popular demand: tx_inhibit */
|
|
if (scc->kiss.tx_inhibit)
|
|
{
|
|
or(scc,R5, TxENAB);
|
|
scc->wreg[R5] |= RTS;
|
|
} else {
|
|
or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */
|
|
}
|
|
} else {
|
|
cl(scc,R5,RTS|TxENAB);
|
|
|
|
set_brg(scc, time_const); /* reprogram baudrate generator */
|
|
|
|
/* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */
|
|
wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
|
|
|
|
#ifndef CONFIG_SCC_TRXECHO
|
|
if (scc->kiss.softdcd)
|
|
#endif
|
|
{
|
|
or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE);
|
|
start_hunt(scc);
|
|
}
|
|
}
|
|
} else {
|
|
if (tx)
|
|
{
|
|
#ifdef CONFIG_SCC_TRXECHO
|
|
if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
|
|
{
|
|
cl(scc, R3, RxENABLE);
|
|
cl(scc, R15, DCDIE|SYNCIE);
|
|
}
|
|
#endif
|
|
|
|
if (scc->kiss.tx_inhibit)
|
|
{
|
|
or(scc,R5, TxENAB);
|
|
scc->wreg[R5] |= RTS;
|
|
} else {
|
|
or(scc,R5,RTS|TxENAB); /* enable tx */
|
|
}
|
|
} else {
|
|
cl(scc,R5,RTS|TxENAB); /* disable tx */
|
|
|
|
if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) &&
|
|
#ifndef CONFIG_SCC_TRXECHO
|
|
scc->kiss.softdcd)
|
|
#else
|
|
1)
|
|
#endif
|
|
{
|
|
or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE);
|
|
start_hunt(scc);
|
|
}
|
|
}
|
|
}
|
|
|
|
enable_irq(scc->irq);
|
|
}
|
|
|
|
|
|
/* ----> SCC timer interrupt handler and friends. <---- */
|
|
|
|
static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
|
|
{
|
|
del_timer(&scc->tx_t);
|
|
|
|
if (when == 0)
|
|
{
|
|
handler((unsigned long) scc);
|
|
} else
|
|
if (when != TIMER_OFF)
|
|
{
|
|
scc->tx_t.data = (unsigned long) scc;
|
|
scc->tx_t.function = handler;
|
|
scc->tx_t.expires = jiffies + (when*HZ)/100;
|
|
add_timer(&scc->tx_t);
|
|
}
|
|
}
|
|
|
|
static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
__scc_start_tx_timer(scc, handler, when);
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
static void scc_start_defer(struct scc_channel *scc)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
del_timer(&scc->tx_wdog);
|
|
|
|
if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF)
|
|
{
|
|
scc->tx_wdog.data = (unsigned long) scc;
|
|
scc->tx_wdog.function = t_busy;
|
|
scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer;
|
|
add_timer(&scc->tx_wdog);
|
|
}
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
static void scc_start_maxkeyup(struct scc_channel *scc)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
del_timer(&scc->tx_wdog);
|
|
|
|
if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF)
|
|
{
|
|
scc->tx_wdog.data = (unsigned long) scc;
|
|
scc->tx_wdog.function = t_maxkeyup;
|
|
scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup;
|
|
add_timer(&scc->tx_wdog);
|
|
}
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* This is called from scc_txint() when there are no more frames to send.
|
|
* Not exactly a timer function, but it is a close friend of the family...
|
|
*/
|
|
|
|
static void scc_tx_done(struct scc_channel *scc)
|
|
{
|
|
/*
|
|
* trx remains keyed in fulldup mode 2 until t_idle expires.
|
|
*/
|
|
|
|
switch (scc->kiss.fulldup)
|
|
{
|
|
case KISS_DUPLEX_LINK:
|
|
scc->stat.tx_state = TXS_IDLE2;
|
|
if (scc->kiss.idletime != TIMER_OFF)
|
|
scc_start_tx_timer(scc, t_idle, scc->kiss.idletime*100);
|
|
break;
|
|
case KISS_DUPLEX_OPTIMA:
|
|
scc_notify(scc, HWEV_ALL_SENT);
|
|
break;
|
|
default:
|
|
scc->stat.tx_state = TXS_BUSY;
|
|
scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
|
|
}
|
|
|
|
netif_wake_queue(scc->dev);
|
|
}
|
|
|
|
|
|
static unsigned char Rand = 17;
|
|
|
|
static inline int is_grouped(struct scc_channel *scc)
|
|
{
|
|
int k;
|
|
struct scc_channel *scc2;
|
|
unsigned char grp1, grp2;
|
|
|
|
grp1 = scc->kiss.group;
|
|
|
|
for (k = 0; k < (Nchips * 2); k++)
|
|
{
|
|
scc2 = &SCC_Info[k];
|
|
grp2 = scc2->kiss.group;
|
|
|
|
if (scc2 == scc || !(scc2->dev && grp2))
|
|
continue;
|
|
|
|
if ((grp1 & 0x3f) == (grp2 & 0x3f))
|
|
{
|
|
if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) )
|
|
return 1;
|
|
|
|
if ( (grp1 & RXGROUP) && scc2->dcd )
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* DWAIT and SLOTTIME expired
|
|
*
|
|
* fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer
|
|
* else key trx and start txdelay
|
|
* fulldup == 1: key trx and start txdelay
|
|
* fulldup == 2: mintime expired, reset status or key trx and start txdelay
|
|
*/
|
|
|
|
static void t_dwait(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
|
|
if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */
|
|
{
|
|
if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */
|
|
scc->stat.tx_state = TXS_IDLE;
|
|
netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */
|
|
return;
|
|
}
|
|
|
|
scc->stat.tx_state = TXS_BUSY;
|
|
}
|
|
|
|
if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
|
|
{
|
|
Rand = Rand * 17 + 31;
|
|
|
|
if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) )
|
|
{
|
|
scc_start_defer(scc);
|
|
scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime);
|
|
return ;
|
|
}
|
|
}
|
|
|
|
if ( !(scc->wreg[R5] & RTS) )
|
|
{
|
|
scc_key_trx(scc, TX_ON);
|
|
scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
|
|
} else {
|
|
scc_start_tx_timer(scc, t_txdelay, 0);
|
|
}
|
|
}
|
|
|
|
|
|
/* TXDELAY expired
|
|
*
|
|
* kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog.
|
|
*/
|
|
|
|
static void t_txdelay(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
|
|
scc_start_maxkeyup(scc);
|
|
|
|
if (scc->tx_buff == NULL)
|
|
{
|
|
disable_irq(scc->irq);
|
|
scc_txint(scc);
|
|
enable_irq(scc->irq);
|
|
}
|
|
}
|
|
|
|
|
|
/* TAILTIME expired
|
|
*
|
|
* switch off transmitter. If we were stopped by Maxkeyup restart
|
|
* transmission after 'mintime' seconds
|
|
*/
|
|
|
|
static void t_tail(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
del_timer(&scc->tx_wdog);
|
|
scc_key_trx(scc, TX_OFF);
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
|
|
if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */
|
|
{
|
|
scc->stat.tx_state = TXS_WAIT;
|
|
scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
|
|
return;
|
|
}
|
|
|
|
scc->stat.tx_state = TXS_IDLE;
|
|
netif_wake_queue(scc->dev);
|
|
}
|
|
|
|
|
|
/* BUSY timeout
|
|
*
|
|
* throw away send buffers if DCD remains active too long.
|
|
*/
|
|
|
|
static void t_busy(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
|
|
del_timer(&scc->tx_t);
|
|
netif_stop_queue(scc->dev); /* don't pile on the wabbit! */
|
|
|
|
scc_discard_buffers(scc);
|
|
scc->stat.txerrs++;
|
|
scc->stat.tx_state = TXS_IDLE;
|
|
|
|
netif_wake_queue(scc->dev);
|
|
}
|
|
|
|
/* MAXKEYUP timeout
|
|
*
|
|
* this is our watchdog.
|
|
*/
|
|
|
|
static void t_maxkeyup(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
/*
|
|
* let things settle down before we start to
|
|
* accept new data.
|
|
*/
|
|
|
|
netif_stop_queue(scc->dev);
|
|
scc_discard_buffers(scc);
|
|
|
|
del_timer(&scc->tx_t);
|
|
|
|
cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */
|
|
cl(scc, R15, TxUIE); /* count it. */
|
|
OutReg(scc->ctrl, R0, RES_Tx_P);
|
|
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
|
|
scc->stat.txerrs++;
|
|
scc->stat.tx_state = TXS_TIMEOUT;
|
|
scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
|
|
}
|
|
|
|
/* IDLE timeout
|
|
*
|
|
* in fulldup mode 2 it keys down the transmitter after 'idle' seconds
|
|
* of inactivity. We will not restart transmission before 'mintime'
|
|
* expires.
|
|
*/
|
|
|
|
static void t_idle(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
|
|
del_timer(&scc->tx_wdog);
|
|
|
|
scc_key_trx(scc, TX_OFF);
|
|
if(scc->kiss.mintime)
|
|
scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
|
|
scc->stat.tx_state = TXS_WAIT;
|
|
}
|
|
|
|
static void scc_init_timer(struct scc_channel *scc)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
scc->stat.tx_state = TXS_IDLE;
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * Set/get L1 parameters * */
|
|
/* ******************************************************************** */
|
|
|
|
|
|
/*
|
|
* this will set the "hardware" parameters through KISS commands or ioctl()
|
|
*/
|
|
|
|
#define CAST(x) (unsigned long)(x)
|
|
|
|
static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg)
|
|
{
|
|
switch (cmd)
|
|
{
|
|
case PARAM_TXDELAY: scc->kiss.txdelay=arg; break;
|
|
case PARAM_PERSIST: scc->kiss.persist=arg; break;
|
|
case PARAM_SLOTTIME: scc->kiss.slottime=arg; break;
|
|
case PARAM_TXTAIL: scc->kiss.tailtime=arg; break;
|
|
case PARAM_FULLDUP: scc->kiss.fulldup=arg; break;
|
|
case PARAM_DTR: break; /* does someone need this? */
|
|
case PARAM_GROUP: scc->kiss.group=arg; break;
|
|
case PARAM_IDLE: scc->kiss.idletime=arg; break;
|
|
case PARAM_MIN: scc->kiss.mintime=arg; break;
|
|
case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break;
|
|
case PARAM_WAIT: scc->kiss.waittime=arg; break;
|
|
case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break;
|
|
case PARAM_TX: scc->kiss.tx_inhibit=arg; break;
|
|
|
|
case PARAM_SOFTDCD:
|
|
scc->kiss.softdcd=arg;
|
|
if (arg)
|
|
{
|
|
or(scc, R15, SYNCIE);
|
|
cl(scc, R15, DCDIE);
|
|
start_hunt(scc);
|
|
} else {
|
|
or(scc, R15, DCDIE);
|
|
cl(scc, R15, SYNCIE);
|
|
}
|
|
break;
|
|
|
|
case PARAM_SPEED:
|
|
if (arg < 256)
|
|
scc->modem.speed=arg*100;
|
|
else
|
|
scc->modem.speed=arg;
|
|
|
|
if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */
|
|
set_speed(scc);
|
|
break;
|
|
|
|
case PARAM_RTS:
|
|
if ( !(scc->wreg[R5] & RTS) )
|
|
{
|
|
if (arg != TX_OFF)
|
|
scc_key_trx(scc, TX_ON);
|
|
scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
|
|
} else {
|
|
if (arg == TX_OFF)
|
|
{
|
|
scc->stat.tx_state = TXS_BUSY;
|
|
scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case PARAM_HWEVENT:
|
|
scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
|
|
break;
|
|
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd)
|
|
{
|
|
switch (cmd)
|
|
{
|
|
case PARAM_TXDELAY: return CAST(scc->kiss.txdelay);
|
|
case PARAM_PERSIST: return CAST(scc->kiss.persist);
|
|
case PARAM_SLOTTIME: return CAST(scc->kiss.slottime);
|
|
case PARAM_TXTAIL: return CAST(scc->kiss.tailtime);
|
|
case PARAM_FULLDUP: return CAST(scc->kiss.fulldup);
|
|
case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd);
|
|
case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0);
|
|
case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0);
|
|
case PARAM_SPEED: return CAST(scc->modem.speed);
|
|
case PARAM_GROUP: return CAST(scc->kiss.group);
|
|
case PARAM_IDLE: return CAST(scc->kiss.idletime);
|
|
case PARAM_MIN: return CAST(scc->kiss.mintime);
|
|
case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup);
|
|
case PARAM_WAIT: return CAST(scc->kiss.waittime);
|
|
case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer);
|
|
case PARAM_TX: return CAST(scc->kiss.tx_inhibit);
|
|
default: return NO_SUCH_PARAM;
|
|
}
|
|
|
|
}
|
|
|
|
#undef CAST
|
|
|
|
/* ******************************************************************* */
|
|
/* * Send calibration pattern * */
|
|
/* ******************************************************************* */
|
|
|
|
static void scc_stop_calibrate(unsigned long channel)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) channel;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
del_timer(&scc->tx_wdog);
|
|
scc_key_trx(scc, TX_OFF);
|
|
wr(scc, R6, 0);
|
|
wr(scc, R7, FLAG);
|
|
Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
|
|
Outb(scc->ctrl,RES_EXT_INT);
|
|
|
|
netif_wake_queue(scc->dev);
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
|
|
static void
|
|
scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
netif_stop_queue(scc->dev);
|
|
scc_discard_buffers(scc);
|
|
|
|
del_timer(&scc->tx_wdog);
|
|
|
|
scc->tx_wdog.data = (unsigned long) scc;
|
|
scc->tx_wdog.function = scc_stop_calibrate;
|
|
scc->tx_wdog.expires = jiffies + HZ*duration;
|
|
add_timer(&scc->tx_wdog);
|
|
|
|
/* This doesn't seem to work. Why not? */
|
|
wr(scc, R6, 0);
|
|
wr(scc, R7, pattern);
|
|
|
|
/*
|
|
* Don't know if this works.
|
|
* Damn, where is my Z8530 programming manual...?
|
|
*/
|
|
|
|
Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
|
|
Outb(scc->ctrl,RES_EXT_INT);
|
|
|
|
scc_key_trx(scc, TX_ON);
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
/* ******************************************************************* */
|
|
/* * Init channel structures, special HW, etc... * */
|
|
/* ******************************************************************* */
|
|
|
|
/*
|
|
* Reset the Z8530s and setup special hardware
|
|
*/
|
|
|
|
static void z8530_init(void)
|
|
{
|
|
struct scc_channel *scc;
|
|
int chip, k;
|
|
unsigned long flags;
|
|
char *flag;
|
|
|
|
|
|
printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2);
|
|
|
|
flag=" ";
|
|
for (k = 0; k < NR_IRQS; k++)
|
|
if (Ivec[k].used)
|
|
{
|
|
printk("%s%d", flag, k);
|
|
flag=",";
|
|
}
|
|
printk("\n");
|
|
|
|
|
|
/* reset and pre-init all chips in the system */
|
|
for (chip = 0; chip < Nchips; chip++)
|
|
{
|
|
scc=&SCC_Info[2*chip];
|
|
if (!scc->ctrl) continue;
|
|
|
|
/* Special SCC cards */
|
|
|
|
if(scc->brand & EAGLE) /* this is an EAGLE card */
|
|
Outb(scc->special,0x08); /* enable interrupt on the board */
|
|
|
|
if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */
|
|
Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */
|
|
|
|
|
|
/* Reset and pre-init Z8530 */
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
|
|
Outb(scc->ctrl, 0);
|
|
OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */
|
|
udelay(100); /* give it 'a bit' more time than required */
|
|
wr(scc, R2, chip*16); /* interrupt vector */
|
|
wr(scc, R9, VIS); /* vector includes status */
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
}
|
|
|
|
|
|
Driver_Initialized = 1;
|
|
}
|
|
|
|
/*
|
|
* Allocate device structure, err, instance, and register driver
|
|
*/
|
|
|
|
static int scc_net_alloc(const char *name, struct scc_channel *scc)
|
|
{
|
|
int err;
|
|
struct net_device *dev;
|
|
|
|
dev = alloc_netdev(0, name, scc_net_setup);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
dev->priv = scc;
|
|
scc->dev = dev;
|
|
spin_lock_init(&scc->lock);
|
|
init_timer(&scc->tx_t);
|
|
init_timer(&scc->tx_wdog);
|
|
|
|
err = register_netdevice(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: can't register network device (%d)\n",
|
|
name, err);
|
|
free_netdev(dev);
|
|
scc->dev = NULL;
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * Network driver methods * */
|
|
/* ******************************************************************** */
|
|
|
|
static unsigned char ax25_bcast[AX25_ADDR_LEN] =
|
|
{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
|
|
static unsigned char ax25_nocall[AX25_ADDR_LEN] =
|
|
{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
|
|
|
|
/* ----> Initialize device <----- */
|
|
|
|
static void scc_net_setup(struct net_device *dev)
|
|
{
|
|
dev->tx_queue_len = 16; /* should be enough... */
|
|
|
|
dev->open = scc_net_open;
|
|
dev->stop = scc_net_close;
|
|
|
|
dev->hard_start_xmit = scc_net_tx;
|
|
dev->hard_header = ax25_hard_header;
|
|
dev->rebuild_header = ax25_rebuild_header;
|
|
dev->set_mac_address = scc_net_set_mac_address;
|
|
dev->get_stats = scc_net_get_stats;
|
|
dev->do_ioctl = scc_net_ioctl;
|
|
dev->tx_timeout = NULL;
|
|
|
|
memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
|
|
memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
|
|
|
|
dev->flags = 0;
|
|
|
|
dev->type = ARPHRD_AX25;
|
|
dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
|
|
dev->mtu = AX25_DEF_PACLEN;
|
|
dev->addr_len = AX25_ADDR_LEN;
|
|
|
|
}
|
|
|
|
/* ----> open network device <---- */
|
|
|
|
static int scc_net_open(struct net_device *dev)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) dev->priv;
|
|
|
|
if (!scc->init)
|
|
return -EINVAL;
|
|
|
|
scc->tx_buff = NULL;
|
|
skb_queue_head_init(&scc->tx_queue);
|
|
|
|
init_channel(scc);
|
|
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* ----> close network device <---- */
|
|
|
|
static int scc_net_close(struct net_device *dev)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) dev->priv;
|
|
unsigned long flags;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
Outb(scc->ctrl,0); /* Make sure pointer is written */
|
|
wr(scc,R1,0); /* disable interrupts */
|
|
wr(scc,R3,0);
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
|
|
del_timer_sync(&scc->tx_t);
|
|
del_timer_sync(&scc->tx_wdog);
|
|
|
|
scc_discard_buffers(scc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----> receive frame, called from scc_rxint() <---- */
|
|
|
|
static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb)
|
|
{
|
|
if (skb->len == 0) {
|
|
dev_kfree_skb_irq(skb);
|
|
return;
|
|
}
|
|
|
|
scc->dev_stat.rx_packets++;
|
|
scc->dev_stat.rx_bytes += skb->len;
|
|
|
|
skb->protocol = ax25_type_trans(skb, scc->dev);
|
|
|
|
netif_rx(skb);
|
|
scc->dev->last_rx = jiffies;
|
|
return;
|
|
}
|
|
|
|
/* ----> transmit frame <---- */
|
|
|
|
static int scc_net_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) dev->priv;
|
|
unsigned long flags;
|
|
char kisscmd;
|
|
|
|
if (skb->len > scc->stat.bufsize || skb->len < 2) {
|
|
scc->dev_stat.tx_dropped++; /* bogus frame */
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
scc->dev_stat.tx_packets++;
|
|
scc->dev_stat.tx_bytes += skb->len;
|
|
scc->stat.txframes++;
|
|
|
|
kisscmd = *skb->data & 0x1f;
|
|
skb_pull(skb, 1);
|
|
|
|
if (kisscmd) {
|
|
scc_set_param(scc, kisscmd, *skb->data);
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&scc->lock, flags);
|
|
|
|
if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
|
|
struct sk_buff *skb_del;
|
|
skb_del = skb_dequeue(&scc->tx_queue);
|
|
dev_kfree_skb(skb_del);
|
|
}
|
|
skb_queue_tail(&scc->tx_queue, skb);
|
|
dev->trans_start = jiffies;
|
|
|
|
|
|
/*
|
|
* Start transmission if the trx state is idle or
|
|
* t_idle hasn't expired yet. Use dwait/persistence/slottime
|
|
* algorithm for normal halfduplex operation.
|
|
*/
|
|
|
|
if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) {
|
|
scc->stat.tx_state = TXS_BUSY;
|
|
if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
|
|
__scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime);
|
|
else
|
|
__scc_start_tx_timer(scc, t_dwait, 0);
|
|
}
|
|
spin_unlock_irqrestore(&scc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* ----> ioctl functions <---- */
|
|
|
|
/*
|
|
* SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg
|
|
* SIOCSCCINI - initialize driver arg: ---
|
|
* SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg
|
|
* SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg
|
|
* SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg
|
|
* SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg
|
|
* SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg
|
|
* SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg
|
|
*/
|
|
|
|
static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct scc_kiss_cmd kiss_cmd;
|
|
struct scc_mem_config memcfg;
|
|
struct scc_hw_config hwcfg;
|
|
struct scc_calibrate cal;
|
|
struct scc_channel *scc = (struct scc_channel *) dev->priv;
|
|
int chan;
|
|
unsigned char device_name[IFNAMSIZ];
|
|
void __user *arg = ifr->ifr_data;
|
|
|
|
|
|
if (!Driver_Initialized)
|
|
{
|
|
if (cmd == SIOCSCCCFG)
|
|
{
|
|
int found = 1;
|
|
|
|
if (!capable(CAP_SYS_RAWIO)) return -EPERM;
|
|
if (!arg) return -EFAULT;
|
|
|
|
if (Nchips >= SCC_MAXCHIPS)
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(&hwcfg, arg, sizeof(hwcfg)))
|
|
return -EFAULT;
|
|
|
|
if (hwcfg.irq == 2) hwcfg.irq = 9;
|
|
|
|
if (hwcfg.irq < 0 || hwcfg.irq >= NR_IRQS)
|
|
return -EINVAL;
|
|
|
|
if (!Ivec[hwcfg.irq].used && hwcfg.irq)
|
|
{
|
|
if (request_irq(hwcfg.irq, scc_isr, SA_INTERRUPT, "AX.25 SCC", NULL))
|
|
printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
|
|
else
|
|
Ivec[hwcfg.irq].used = 1;
|
|
}
|
|
|
|
if (hwcfg.vector_latch && !Vector_Latch) {
|
|
if (!request_region(hwcfg.vector_latch, 1, "scc vector latch"))
|
|
printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch);
|
|
else
|
|
Vector_Latch = hwcfg.vector_latch;
|
|
}
|
|
|
|
if (hwcfg.clock == 0)
|
|
hwcfg.clock = SCC_DEFAULT_CLOCK;
|
|
|
|
#ifndef SCC_DONT_CHECK
|
|
|
|
if(request_region(hwcfg.ctrl_a, 1, "scc-probe"))
|
|
{
|
|
disable_irq(hwcfg.irq);
|
|
Outb(hwcfg.ctrl_a, 0);
|
|
OutReg(hwcfg.ctrl_a, R9, FHWRES);
|
|
udelay(100);
|
|
OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */
|
|
udelay(5);
|
|
|
|
if (InReg(hwcfg.ctrl_a,R13) != 0x55)
|
|
found = 0;
|
|
enable_irq(hwcfg.irq);
|
|
release_region(hwcfg.ctrl_a, 1);
|
|
}
|
|
else
|
|
found = 0;
|
|
#endif
|
|
|
|
if (found)
|
|
{
|
|
SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a;
|
|
SCC_Info[2*Nchips ].data = hwcfg.data_a;
|
|
SCC_Info[2*Nchips ].irq = hwcfg.irq;
|
|
SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b;
|
|
SCC_Info[2*Nchips+1].data = hwcfg.data_b;
|
|
SCC_Info[2*Nchips+1].irq = hwcfg.irq;
|
|
|
|
SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a;
|
|
SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b;
|
|
SCC_ctrl[Nchips].irq = hwcfg.irq;
|
|
}
|
|
|
|
|
|
for (chan = 0; chan < 2; chan++)
|
|
{
|
|
sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan);
|
|
|
|
SCC_Info[2*Nchips+chan].special = hwcfg.special;
|
|
SCC_Info[2*Nchips+chan].clock = hwcfg.clock;
|
|
SCC_Info[2*Nchips+chan].brand = hwcfg.brand;
|
|
SCC_Info[2*Nchips+chan].option = hwcfg.option;
|
|
SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc;
|
|
|
|
#ifdef SCC_DONT_CHECK
|
|
printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n",
|
|
device_name,
|
|
SCC_Info[2*Nchips+chan].data,
|
|
SCC_Info[2*Nchips+chan].ctrl);
|
|
|
|
#else
|
|
printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n",
|
|
device_name,
|
|
chan? hwcfg.data_b : hwcfg.data_a,
|
|
chan? hwcfg.ctrl_b : hwcfg.ctrl_a,
|
|
found? "found" : "missing");
|
|
#endif
|
|
|
|
if (found)
|
|
{
|
|
request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl");
|
|
request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data");
|
|
if (Nchips+chan != 0 &&
|
|
scc_net_alloc(device_name,
|
|
&SCC_Info[2*Nchips+chan]))
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (found) Nchips++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (cmd == SIOCSCCINI)
|
|
{
|
|
if (!capable(CAP_SYS_RAWIO))
|
|
return -EPERM;
|
|
|
|
if (Nchips == 0)
|
|
return -EINVAL;
|
|
|
|
z8530_init();
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL; /* confuse the user */
|
|
}
|
|
|
|
if (!scc->init)
|
|
{
|
|
if (cmd == SIOCSCCCHANINI)
|
|
{
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
if (!arg) return -EINVAL;
|
|
|
|
scc->stat.bufsize = SCC_BUFSIZE;
|
|
|
|
if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem)))
|
|
return -EINVAL;
|
|
|
|
/* default KISS Params */
|
|
|
|
if (scc->modem.speed < 4800)
|
|
{
|
|
scc->kiss.txdelay = 36; /* 360 ms */
|
|
scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */
|
|
scc->kiss.slottime = 16; /* 160 ms */
|
|
scc->kiss.tailtime = 4; /* minimal reasonable value */
|
|
scc->kiss.fulldup = 0; /* CSMA */
|
|
scc->kiss.waittime = 50; /* 500 ms */
|
|
scc->kiss.maxkeyup = 10; /* 10 s */
|
|
scc->kiss.mintime = 3; /* 3 s */
|
|
scc->kiss.idletime = 30; /* 30 s */
|
|
scc->kiss.maxdefer = 120; /* 2 min */
|
|
scc->kiss.softdcd = 0; /* hardware dcd */
|
|
} else {
|
|
scc->kiss.txdelay = 10; /* 100 ms */
|
|
scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */
|
|
scc->kiss.slottime = 8; /* 160 ms */
|
|
scc->kiss.tailtime = 1; /* minimal reasonable value */
|
|
scc->kiss.fulldup = 0; /* CSMA */
|
|
scc->kiss.waittime = 50; /* 500 ms */
|
|
scc->kiss.maxkeyup = 7; /* 7 s */
|
|
scc->kiss.mintime = 3; /* 3 s */
|
|
scc->kiss.idletime = 30; /* 30 s */
|
|
scc->kiss.maxdefer = 120; /* 2 min */
|
|
scc->kiss.softdcd = 0; /* hardware dcd */
|
|
}
|
|
|
|
scc->tx_buff = NULL;
|
|
skb_queue_head_init(&scc->tx_queue);
|
|
scc->init = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch(cmd)
|
|
{
|
|
case SIOCSCCRESERVED:
|
|
return -ENOIOCTLCMD;
|
|
|
|
case SIOCSCCSMEM:
|
|
if (!capable(CAP_SYS_RAWIO)) return -EPERM;
|
|
if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg)))
|
|
return -EINVAL;
|
|
scc->stat.bufsize = memcfg.bufsize;
|
|
return 0;
|
|
|
|
case SIOCSCCGSTAT:
|
|
if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat)))
|
|
return -EINVAL;
|
|
return 0;
|
|
|
|
case SIOCSCCGKISS:
|
|
if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
|
|
return -EINVAL;
|
|
kiss_cmd.param = scc_get_param(scc, kiss_cmd.command);
|
|
if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd)))
|
|
return -EINVAL;
|
|
return 0;
|
|
|
|
case SIOCSCCSKISS:
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
|
|
return -EINVAL;
|
|
return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param);
|
|
|
|
case SIOCSCCCAL:
|
|
if (!capable(CAP_SYS_RAWIO)) return -EPERM;
|
|
if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0)
|
|
return -EINVAL;
|
|
|
|
scc_start_calibrate(scc, cal.time, cal.pattern);
|
|
return 0;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* ----> set interface callsign <---- */
|
|
|
|
static int scc_net_set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct sockaddr *sa = (struct sockaddr *) addr;
|
|
memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
|
|
return 0;
|
|
}
|
|
|
|
/* ----> get statistics <---- */
|
|
|
|
static struct net_device_stats *scc_net_get_stats(struct net_device *dev)
|
|
{
|
|
struct scc_channel *scc = (struct scc_channel *) dev->priv;
|
|
|
|
scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over;
|
|
scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under;
|
|
scc->dev_stat.rx_fifo_errors = scc->stat.rx_over;
|
|
scc->dev_stat.tx_fifo_errors = scc->stat.tx_under;
|
|
|
|
return &scc->dev_stat;
|
|
}
|
|
|
|
/* ******************************************************************** */
|
|
/* * dump statistics to /proc/net/z8530drv * */
|
|
/* ******************************************************************** */
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
|
|
static inline struct scc_channel *scc_net_seq_idx(loff_t pos)
|
|
{
|
|
int k;
|
|
|
|
for (k = 0; k < Nchips*2; ++k) {
|
|
if (!SCC_Info[k].init)
|
|
continue;
|
|
if (pos-- == 0)
|
|
return &SCC_Info[k];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos)
|
|
{
|
|
return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN;
|
|
|
|
}
|
|
|
|
static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos)
|
|
{
|
|
unsigned k;
|
|
struct scc_channel *scc = v;
|
|
++*pos;
|
|
|
|
for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1;
|
|
k < Nchips*2; ++k) {
|
|
if (SCC_Info[k].init)
|
|
return &SCC_Info[k];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void scc_net_seq_stop(struct seq_file *seq, void *v)
|
|
{
|
|
}
|
|
|
|
static int scc_net_seq_show(struct seq_file *seq, void *v)
|
|
{
|
|
if (v == SEQ_START_TOKEN) {
|
|
seq_puts(seq, "z8530drv-"VERSION"\n");
|
|
} else if (!Driver_Initialized) {
|
|
seq_puts(seq, "not initialized\n");
|
|
} else if (!Nchips) {
|
|
seq_puts(seq, "chips missing\n");
|
|
} else {
|
|
const struct scc_channel *scc = v;
|
|
const struct scc_stat *stat = &scc->stat;
|
|
const struct scc_kiss *kiss = &scc->kiss;
|
|
|
|
|
|
/* dev data ctrl irq clock brand enh vector special option
|
|
* baud nrz clocksrc softdcd bufsize
|
|
* rxints txints exints spints
|
|
* rcvd rxerrs over / xmit txerrs under / nospace bufsize
|
|
* txd pers slot tail ful wait min maxk idl defr txof grp
|
|
* W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
|
|
* R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ##
|
|
*/
|
|
|
|
seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n",
|
|
scc->dev->name,
|
|
scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand,
|
|
scc->enhanced, Vector_Latch, scc->special,
|
|
scc->option);
|
|
seq_printf(seq, "\t%lu %d %d %d %d\n",
|
|
scc->modem.speed, scc->modem.nrz,
|
|
scc->modem.clocksrc, kiss->softdcd,
|
|
stat->bufsize);
|
|
seq_printf(seq, "\t%lu %lu %lu %lu\n",
|
|
stat->rxints, stat->txints, stat->exints, stat->spints);
|
|
seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n",
|
|
stat->rxframes, stat->rxerrs, stat->rx_over,
|
|
stat->txframes, stat->txerrs, stat->tx_under,
|
|
stat->nospace, stat->tx_state);
|
|
|
|
#define K(x) kiss->x
|
|
seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n",
|
|
K(txdelay), K(persist), K(slottime), K(tailtime),
|
|
K(fulldup), K(waittime), K(mintime), K(maxkeyup),
|
|
K(idletime), K(maxdefer), K(tx_inhibit), K(group));
|
|
#undef K
|
|
#ifdef SCC_DEBUG
|
|
{
|
|
int reg;
|
|
|
|
seq_printf(seq, "\tW ");
|
|
for (reg = 0; reg < 16; reg++)
|
|
seq_printf(seq, "%2.2x ", scc->wreg[reg]);
|
|
seq_printf(seq, "\n");
|
|
|
|
seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1));
|
|
for (reg = 3; reg < 8; reg++)
|
|
seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
|
|
seq_printf(seq, "XX ");
|
|
for (reg = 9; reg < 16; reg++)
|
|
seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
|
|
seq_printf(seq, "\n");
|
|
}
|
|
#endif
|
|
seq_putc(seq, '\n');
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct seq_operations scc_net_seq_ops = {
|
|
.start = scc_net_seq_start,
|
|
.next = scc_net_seq_next,
|
|
.stop = scc_net_seq_stop,
|
|
.show = scc_net_seq_show,
|
|
};
|
|
|
|
|
|
static int scc_net_seq_open(struct inode *inode, struct file *file)
|
|
{
|
|
return seq_open(file, &scc_net_seq_ops);
|
|
}
|
|
|
|
static struct file_operations scc_net_seq_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = scc_net_seq_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = seq_release_private,
|
|
};
|
|
|
|
#endif /* CONFIG_PROC_FS */
|
|
|
|
|
|
/* ******************************************************************** */
|
|
/* * Init SCC driver * */
|
|
/* ******************************************************************** */
|
|
|
|
static int __init scc_init_driver (void)
|
|
{
|
|
char devname[IFNAMSIZ];
|
|
|
|
printk(banner);
|
|
|
|
sprintf(devname,"%s0", SCC_DriverName);
|
|
|
|
rtnl_lock();
|
|
if (scc_net_alloc(devname, SCC_Info)) {
|
|
rtnl_unlock();
|
|
printk(KERN_ERR "z8530drv: cannot initialize module\n");
|
|
return -EIO;
|
|
}
|
|
rtnl_unlock();
|
|
|
|
proc_net_fops_create("z8530drv", 0, &scc_net_seq_fops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit scc_cleanup_driver(void)
|
|
{
|
|
io_port ctrl;
|
|
int k;
|
|
struct scc_channel *scc;
|
|
struct net_device *dev;
|
|
|
|
if (Nchips == 0 && (dev = SCC_Info[0].dev))
|
|
{
|
|
unregister_netdev(dev);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
/* Guard against chip prattle */
|
|
local_irq_disable();
|
|
|
|
for (k = 0; k < Nchips; k++)
|
|
if ( (ctrl = SCC_ctrl[k].chan_A) )
|
|
{
|
|
Outb(ctrl, 0);
|
|
OutReg(ctrl,R9,FHWRES); /* force hardware reset */
|
|
udelay(50);
|
|
}
|
|
|
|
/* To unload the port must be closed so no real IRQ pending */
|
|
for (k=0; k < NR_IRQS ; k++)
|
|
if (Ivec[k].used) free_irq(k, NULL);
|
|
|
|
local_irq_enable();
|
|
|
|
/* Now clean up */
|
|
for (k = 0; k < Nchips*2; k++)
|
|
{
|
|
scc = &SCC_Info[k];
|
|
if (scc->ctrl)
|
|
{
|
|
release_region(scc->ctrl, 1);
|
|
release_region(scc->data, 1);
|
|
}
|
|
if (scc->dev)
|
|
{
|
|
unregister_netdev(scc->dev);
|
|
free_netdev(scc->dev);
|
|
}
|
|
}
|
|
|
|
|
|
if (Vector_Latch)
|
|
release_region(Vector_Latch, 1);
|
|
|
|
proc_net_remove("z8530drv");
|
|
}
|
|
|
|
MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>");
|
|
MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards");
|
|
MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio");
|
|
MODULE_LICENSE("GPL");
|
|
module_init(scc_init_driver);
|
|
module_exit(scc_cleanup_driver);
|