alistair23-linux/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
Linus Walleij 131b3de701 Input: add D-Link DIR-685 touchkeys driver
This adds support for the D-Link DIR-685 touchkeys found in the
router with this name.

The vendor code calles this a "touchpad" but we are registering
it here under its real name.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-05 15:35:32 -07:00

22 lines
597 B
Plaintext

* D-Link DIR-685 Touchkeys
This is a I2C one-off touchkey controller based on the Cypress Semiconductor
CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
board inside the router is named E119921.
The touchkey device node should be placed inside an I2C bus node.
Required properties:
- compatible: must be "dlink,dir685-touchkeys"
- reg: the I2C address of the touchkeys
- interrupts: reference to the interrupt number
Example:
touchkeys@26 {
compatible = "dlink,dir685-touchkeys";
reg = <0x26>;
interrupt-parent = <&gpio0>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
};