alistair23-linux/drivers/pcmcia/pxa2xx_mainstone.c
Linus Torvalds 65a6ec0d72 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...
2007-10-15 16:08:50 -07:00

180 lines
4.4 KiB
C

/*
* linux/drivers/pcmcia/pxa2xx_mainstone.c
*
* Mainstone PCMCIA specific routines.
*
* Created: May 12, 2004
* Author: Nicolas Pitre
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <pcmcia/ss.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/mainstone.h>
#include "soc_common.h"
static struct pcmcia_irqs irqs[] = {
{ 0, MAINSTONE_S0_CD_IRQ, "PCMCIA0 CD" },
{ 1, MAINSTONE_S1_CD_IRQ, "PCMCIA1 CD" },
{ 0, MAINSTONE_S0_STSCHG_IRQ, "PCMCIA0 STSCHG" },
{ 1, MAINSTONE_S1_STSCHG_IRQ, "PCMCIA1 STSCHG" },
};
static int mst_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
/*
* Setup default state of GPIO outputs
* before we enable them as outputs.
*/
skt->irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static void mst_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static unsigned long mst_pcmcia_status[2];
static void mst_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
unsigned long status, flip;
status = (skt->nr == 0) ? MST_PCMCIA0 : MST_PCMCIA1;
flip = (status ^ mst_pcmcia_status[skt->nr]) & MST_PCMCIA_nSTSCHG_BVD1;
/*
* Workaround for STSCHG which can't be deasserted:
* We therefore disable/enable corresponding IRQs
* as needed to avoid IRQ locks.
*/
if (flip) {
mst_pcmcia_status[skt->nr] = status;
if (status & MST_PCMCIA_nSTSCHG_BVD1)
enable_irq( (skt->nr == 0) ? MAINSTONE_S0_STSCHG_IRQ
: MAINSTONE_S1_STSCHG_IRQ );
else
disable_irq( (skt->nr == 0) ? MAINSTONE_S0_STSCHG_IRQ
: MAINSTONE_S1_STSCHG_IRQ );
}
state->detect = (status & MST_PCMCIA_nCD) ? 0 : 1;
state->ready = (status & MST_PCMCIA_nIRQ) ? 1 : 0;
state->bvd1 = (status & MST_PCMCIA_nSTSCHG_BVD1) ? 1 : 0;
state->bvd2 = (status & MST_PCMCIA_nSPKR_BVD2) ? 1 : 0;
state->vs_3v = (status & MST_PCMCIA_nVS1) ? 0 : 1;
state->vs_Xv = (status & MST_PCMCIA_nVS2) ? 0 : 1;
state->wrprot = 0; /* not available */
}
static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
unsigned long power = 0;
int ret = 0;
switch (state->Vcc) {
case 0: power |= MST_PCMCIA_PWR_VCC_0; break;
case 33: power |= MST_PCMCIA_PWR_VCC_33; break;
case 50: power |= MST_PCMCIA_PWR_VCC_50; break;
default:
printk(KERN_ERR "%s(): bad Vcc %u\n",
__FUNCTION__, state->Vcc);
ret = -1;
}
switch (state->Vpp) {
case 0: power |= MST_PCMCIA_PWR_VPP_0; break;
case 120: power |= MST_PCMCIA_PWR_VPP_120; break;
default:
if(state->Vpp == state->Vcc) {
power |= MST_PCMCIA_PWR_VPP_VCC;
} else {
printk(KERN_ERR "%s(): bad Vpp %u\n",
__FUNCTION__, state->Vpp);
ret = -1;
}
}
if (state->flags & SS_RESET)
power |= MST_PCMCIA_RESET;
switch (skt->nr) {
case 0: MST_PCMCIA0 = power; break;
case 1: MST_PCMCIA1 = power; break;
default: ret = -1;
}
return ret;
}
static void mst_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
}
static void mst_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
}
static struct pcmcia_low_level mst_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = mst_pcmcia_hw_init,
.hw_shutdown = mst_pcmcia_hw_shutdown,
.socket_state = mst_pcmcia_socket_state,
.configure_socket = mst_pcmcia_configure_socket,
.socket_init = mst_pcmcia_socket_init,
.socket_suspend = mst_pcmcia_socket_suspend,
.nr = 2,
};
static struct platform_device *mst_pcmcia_device;
static int __init mst_pcmcia_init(void)
{
int ret;
mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!mst_pcmcia_device)
return -ENOMEM;
mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops;
ret = platform_device_add(mst_pcmcia_device);
if (ret)
platform_device_put(mst_pcmcia_device);
return ret;
}
static void __exit mst_pcmcia_exit(void)
{
platform_device_unregister(mst_pcmcia_device);
}
fs_initcall(mst_pcmcia_init);
module_exit(mst_pcmcia_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pxa2xx-pcmcia");