alistair23-linux/arch/powerpc/sysdev/mv64x60_pci.c
Kumar Gala 0a3786c5f7 [POWERPC] Removed remnants of bus_offset
Removed the remants of bus_offset and use self_busno in the mv64x60 case
and use pci_assign_all_buses on 83xx/85xx.

83xx/85xx have multiple PHBs and the firmwares on these devices tend not
to handle topologies with P2P bridges well so we let Linux just reassign
the bus numbers to match.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:15 -05:00

172 lines
4.2 KiB
C

/*
* PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
*
* Author: Dale Farnsworth <dale@farnsworth.org>
*
* 2007 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
#ifdef CONFIG_SYSFS
/* 32-bit hex or dec stringified number + '\n' */
#define MV64X60_VAL_LEN_MAX 11
#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off,
size_t count)
{
struct pci_dev *phb;
u32 v;
if (off > 0)
return 0;
if (count < MV64X60_VAL_LEN_MAX)
return -EINVAL;
phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!phb)
return -ENODEV;
pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
pci_dev_put(phb);
return sprintf(buf, "0x%08x\n", v);
}
static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off,
size_t count)
{
struct pci_dev *phb;
u32 v;
if (off > 0)
return 0;
if (count <= 0)
return -EINVAL;
if (sscanf(buf, "%i", &v) != 1)
return -EINVAL;
phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!phb)
return -ENODEV;
pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
pci_dev_put(phb);
return count;
}
static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
.attr = {
.name = "hs_reg",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.size = MV64X60_VAL_LEN_MAX,
.read = mv64x60_hs_reg_read,
.write = mv64x60_hs_reg_write,
};
static int __init mv64x60_sysfs_init(void)
{
struct device_node *np;
struct platform_device *pdev;
const unsigned int *prop;
np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
}
subsys_initcall(mv64x60_sysfs_init);
#endif /* CONFIG_SYSFS */
static void __init mv64x60_pci_fixup_early(struct pci_dev *dev)
{
/*
* Set the host bridge hdr_type to an invalid value so that
* pci_setup_device() will ignore the host bridge.
*/
dev->hdr_type = PCI_HEADER_TYPE_INVALID;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
mv64x60_pci_fixup_early);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
mv64x60_pci_fixup_early);
static int __init mv64x60_add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
int primary;
memset(&rsrc, 0, sizeof(rsrc));
/* Fetch host bridge registers address */
if (of_address_to_resource(dev, 0, &rsrc)) {
printk(KERN_ERR "No PCI reg property in device tree\n");
return -ENODEV;
}
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int))
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
hose = pcibios_alloc_controller();
if (!hose)
return -ENOMEM;
hose->arch_data = dev;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, rsrc.start, rsrc.start + 4);
hose->self_busno = hose->first_busno;
printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
primary = (hose->first_busno == 0);
pci_process_bridge_OF_ranges(hose, dev, primary);
return 0;
}
void __init mv64x60_pci_init(void)
{
struct device_node *np = NULL;
while ((np = of_find_compatible_node(np, "pci", "marvell,mv64x60-pci")))
mv64x60_add_bridge(np);
}