![Linus Torvalds](/assets/img/avatar_default.png)
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits) [media] staging/lirc: fix mem leaks and ptr err usage [media] hdpvr: reduce latency of i2c read/write w/recycled buffer [media] hdpvr: enable IR part [media] rc/mceusb: timeout should be in ns, not us [media] v4l2-device: fix 'use-after-freed' oops [media] v4l2-dev: don't memset video_device.dev [media] zoran: use video_device_alloc instead of kmalloc [media] w9966: zero device state after a detach [media] v4l: Fix a use-before-set in the control framework [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h [media] DocBook/v4l: update V4L2 revision and update copyright years [media] DocBook/v4l: fix validation error in dev-rds.xml [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs [media] v4l2-ctrls: fix missing 'read-only' check [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71 [media] lirc_zilog: Update TODO.lirc_zilog [media] lirc_zilog: Add Andy Walls to copyright notice and authors list [media] lirc_zilog: Remove useless struct i2c_driver.command function [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function ...
987 lines
27 KiB
Plaintext
987 lines
27 KiB
Plaintext
#
|
|
# Generic video config states
|
|
#
|
|
|
|
config VIDEO_V4L2
|
|
tristate
|
|
depends on VIDEO_DEV && VIDEO_V4L2_COMMON
|
|
default VIDEO_DEV && VIDEO_V4L2_COMMON
|
|
|
|
config VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_DMA_SG
|
|
depends on HAS_DMA
|
|
select VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_VMALLOC
|
|
select VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_DMA_CONTIG
|
|
depends on HAS_DMA
|
|
select VIDEOBUF_GEN
|
|
tristate
|
|
|
|
config VIDEOBUF_DVB
|
|
tristate
|
|
select VIDEOBUF_GEN
|
|
|
|
config VIDEO_BTCX
|
|
depends on PCI
|
|
tristate
|
|
|
|
config VIDEO_TVEEPROM
|
|
tristate
|
|
depends on I2C
|
|
|
|
config VIDEO_TUNER
|
|
tristate
|
|
depends on MEDIA_TUNER
|
|
|
|
config V4L2_MEM2MEM_DEV
|
|
tristate
|
|
depends on VIDEOBUF_GEN
|
|
|
|
#
|
|
# Multimedia Video device configuration
|
|
#
|
|
|
|
menuconfig VIDEO_CAPTURE_DRIVERS
|
|
bool "Video capture adapters"
|
|
depends on VIDEO_V4L2
|
|
default y
|
|
---help---
|
|
Say Y here to enable selecting the video adapters for
|
|
webcams, analog TV, and hybrid analog/digital TV.
|
|
Some of those devices also supports FM radio.
|
|
|
|
if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
|
|
|
|
config VIDEO_ADV_DEBUG
|
|
bool "Enable advanced debug functionality"
|
|
default n
|
|
---help---
|
|
Say Y here to enable advanced debugging functionality on some
|
|
V4L devices.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_FIXED_MINOR_RANGES
|
|
bool "Enable old-style fixed minor ranges for video devices"
|
|
default n
|
|
---help---
|
|
Say Y here to enable the old-style fixed-range minor assignments.
|
|
Only useful if you rely on the old behavior and use mknod instead of udev.
|
|
|
|
When in doubt, say N.
|
|
|
|
config VIDEO_HELPER_CHIPS_AUTO
|
|
bool "Autoselect pertinent encoders/decoders and other helper chips"
|
|
default y if !EXPERT
|
|
---help---
|
|
Most video cards may require additional modules to encode or
|
|
decode audio/video standards. This option will autoselect
|
|
all pertinent modules to each selected video module.
|
|
|
|
Unselect this only if you know exactly what you are doing, since
|
|
it may break support on some boards.
|
|
|
|
In doubt, say Y.
|
|
|
|
config VIDEO_IR_I2C
|
|
tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
|
|
depends on I2C && RC_CORE
|
|
default y
|
|
---help---
|
|
Most boards have an IR chip directly connected via GPIO. However,
|
|
some video boards have the IR connected via I2C bus.
|
|
|
|
If your board doesn't have an I2C IR chip, you may disable this
|
|
option.
|
|
|
|
In doubt, say Y.
|
|
|
|
#
|
|
# Encoder / Decoder module configuration
|
|
#
|
|
|
|
menu "Encoders/decoders and other helper chips"
|
|
visible if !VIDEO_HELPER_CHIPS_AUTO
|
|
|
|
comment "Audio decoders"
|
|
|
|
config VIDEO_TVAUDIO
|
|
tristate "Simple audio decoder chips"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for several audio decoder chips found on some bt8xx boards:
|
|
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
|
|
tea6320, tea6420, tda8425, ta8874z.
|
|
Microchip: pic16c54 based design on ProVideo PV951 board.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvaudio.
|
|
|
|
config VIDEO_TDA7432
|
|
tristate "Philips TDA7432 audio processor"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for tda7432 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda7432.
|
|
|
|
config VIDEO_TDA9840
|
|
tristate "Philips TDA9840 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tda9840 audio decoder chip found on some Zoran boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda9840.
|
|
|
|
config VIDEO_TEA6415C
|
|
tristate "Philips TEA6415C audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6415c audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6415c.
|
|
|
|
config VIDEO_TEA6420
|
|
tristate "Philips TEA6420 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6420 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6420.
|
|
|
|
config VIDEO_MSP3400
|
|
tristate "Micronas MSP34xx audio decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Micronas MSP34xx series of audio decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called msp3400.
|
|
|
|
config VIDEO_CS5345
|
|
tristate "Cirrus Logic CS5345 audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs5345.
|
|
|
|
config VIDEO_CS53L32A
|
|
tristate "Cirrus Logic CS53L32A audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS53L32A low voltage
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs53l32a.
|
|
|
|
config VIDEO_M52790
|
|
tristate "Mitsubishi M52790 A/V switch"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Mitsubishi M52790 A/V switch.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called m52790.
|
|
|
|
config VIDEO_TLV320AIC23B
|
|
tristate "Texas Instruments TLV320AIC23B audio codec"
|
|
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
|
|
---help---
|
|
Support for the Texas Instruments TLV320AIC23B audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tlv320aic23b.
|
|
|
|
config VIDEO_WM8775
|
|
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8775 high
|
|
performance stereo A/D Converter with a 4 channel input mixer.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8775.
|
|
|
|
config VIDEO_WM8739
|
|
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8739
|
|
stereo A/D Converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8739.
|
|
|
|
config VIDEO_VP27SMPX
|
|
tristate "Panasonic VP27s internal MPX"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the internal MPX of the Panasonic VP27s tuner.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vp27smpx.
|
|
|
|
comment "RDS decoders"
|
|
|
|
config VIDEO_SAA6588
|
|
tristate "SAA6588 Radio Chip RDS decoder support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
|
|
help
|
|
Support for this Radio Data System (RDS) decoder. This allows
|
|
seeing radio station identification transmitted using this
|
|
standard.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa6588.
|
|
|
|
comment "Video decoders"
|
|
|
|
config VIDEO_ADV7180
|
|
tristate "Analog Devices ADV7180 decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7180 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7180.
|
|
|
|
config VIDEO_BT819
|
|
tristate "BT819A VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT819A video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt819.
|
|
|
|
config VIDEO_BT856
|
|
tristate "BT856 VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT856 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt856.
|
|
|
|
config VIDEO_BT866
|
|
tristate "BT866 VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT866 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt866.
|
|
|
|
config VIDEO_KS0127
|
|
tristate "KS0127 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for KS0127 video decoder.
|
|
|
|
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
|
|
cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ks0127.
|
|
|
|
config VIDEO_OV7670
|
|
tristate "OmniVision OV7670 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV7670 VGA camera. It currently only works with the M88ALP01
|
|
controller.
|
|
|
|
config VIDEO_MT9V011
|
|
tristate "Micron mt9v011 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Micron
|
|
mt0v011 1.3 Mpixel camera. It currently only works with the
|
|
em28xx driver.
|
|
|
|
config VIDEO_TCM825X
|
|
tristate "TCM825x camera sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a driver for the Toshiba TCM825x VGA camera sensor.
|
|
It is used for example in Nokia N800.
|
|
|
|
config VIDEO_SAA7110
|
|
tristate "Philips SAA7110 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7110 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7110.
|
|
|
|
config VIDEO_SAA711X
|
|
tristate "Philips SAA7111/3/4/5 video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7111/3/4/5 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7115.
|
|
|
|
config VIDEO_SAA717X
|
|
tristate "Philips SAA7171/3/4 audio/video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7171/3/4 audio/video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa717x.
|
|
|
|
config VIDEO_SAA7191
|
|
tristate "Philips SAA7191 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7191 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7191.
|
|
|
|
config VIDEO_TVP514X
|
|
tristate "Texas Instruments TVP514x video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
|
|
decoder. It is currently working with the TI OMAP3 camera
|
|
controller.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp514x.
|
|
|
|
config VIDEO_TVP5150
|
|
tristate "Texas Instruments TVP5150 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments TVP5150 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp5150.
|
|
|
|
config VIDEO_TVP7002
|
|
tristate "Texas Instruments TVP7002 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments TVP7002 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp7002.
|
|
|
|
config VIDEO_VPX3220
|
|
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for VPX322x video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpx3220.
|
|
|
|
comment "Video and audio decoders"
|
|
|
|
source "drivers/media/video/cx25840/Kconfig"
|
|
|
|
comment "MPEG video encoders"
|
|
|
|
config VIDEO_CX2341X
|
|
tristate "Conexant CX2341x MPEG encoders"
|
|
depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
|
|
---help---
|
|
Support for the Conexant CX23416 MPEG encoders
|
|
and CX23415 MPEG encoder/decoders.
|
|
|
|
This module currently supports the encoding functions only.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cx2341x.
|
|
|
|
comment "Video encoders"
|
|
|
|
config VIDEO_SAA7127
|
|
tristate "Philips SAA7127/9 digital video encoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7127/9 digital video encoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7127.
|
|
|
|
config VIDEO_SAA7185
|
|
tristate "Philips SAA7185 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7185 video encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7185.
|
|
|
|
config VIDEO_ADV7170
|
|
tristate "Analog Devices ADV7170 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7170 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7170.
|
|
|
|
config VIDEO_ADV7175
|
|
tristate "Analog Devices ADV7175 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7175 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7175.
|
|
|
|
config VIDEO_THS7303
|
|
tristate "THS7303 Video Amplifier"
|
|
depends on I2C
|
|
help
|
|
Support for TI THS7303 video amplifier
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ths7303.
|
|
|
|
config VIDEO_ADV7343
|
|
tristate "ADV7343 video encoder"
|
|
depends on I2C
|
|
help
|
|
Support for Analog Devices I2C bus based ADV7343 encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7343.
|
|
|
|
config VIDEO_AK881X
|
|
tristate "AK8813/AK8814 video encoders"
|
|
depends on I2C
|
|
help
|
|
Video output driver for AKM AK8813 and AK8814 TV encoders
|
|
|
|
comment "Video improvement chips"
|
|
|
|
config VIDEO_UPD64031A
|
|
tristate "NEC Electronics uPD64031A Ghost Reduction"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64031A Ghost Reduction
|
|
video chip. It is most often found in NTSC TV cards made for
|
|
Japan and is used to reduce the 'ghosting' effect that can
|
|
be present in analog TV broadcasts.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64031a.
|
|
|
|
config VIDEO_UPD64083
|
|
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
|
|
separation video chip. It is used to improve the quality of
|
|
the colors of a composite signal.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64083.
|
|
|
|
endmenu # encoder / decoder chips
|
|
|
|
config VIDEO_SH_VOU
|
|
tristate "SuperH VOU video output driver"
|
|
depends on VIDEO_DEV && ARCH_SHMOBILE
|
|
select VIDEOBUF_DMA_CONTIG
|
|
help
|
|
Support for the Video Output Unit (VOU) on SuperH SoCs.
|
|
|
|
config VIDEO_VIU
|
|
tristate "Freescale VIU Video Driver"
|
|
depends on VIDEO_V4L2 && PPC_MPC512x
|
|
select VIDEOBUF_DMA_CONTIG
|
|
default y
|
|
---help---
|
|
Support for Freescale VIU video driver. This device captures
|
|
video data, or overlays video on DIU frame buffer.
|
|
|
|
Say Y here if you want to enable VIU device on MPC5121e Rev2+.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_VIVI
|
|
tristate "Virtual Video Driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
|
|
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
|
|
select FONT_8x16
|
|
select VIDEOBUF_VMALLOC
|
|
default n
|
|
---help---
|
|
Enables a virtual video driver. This device shows a color bar
|
|
and a timestamp, as a real device would generate by using V4L2
|
|
api.
|
|
Say Y here if you want to test video apps or debug V4L devices.
|
|
In doubt, say N.
|
|
|
|
source "drivers/media/video/davinci/Kconfig"
|
|
|
|
source "drivers/media/video/omap/Kconfig"
|
|
|
|
source "drivers/media/video/bt8xx/Kconfig"
|
|
|
|
config VIDEO_PMS
|
|
tristate "Mediavision Pro Movie Studio Video For Linux"
|
|
depends on ISA && VIDEO_V4L2
|
|
help
|
|
Say Y if you have such a thing.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called pms.
|
|
|
|
config VIDEO_BWQCAM
|
|
tristate "Quickcam BW Video For Linux"
|
|
depends on PARPORT && VIDEO_V4L2
|
|
help
|
|
Say Y have if you the black and white version of the QuickCam
|
|
camera. See the next option for the color version.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bw-qcam.
|
|
|
|
config VIDEO_CQCAM
|
|
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
|
|
help
|
|
This is the video4linux driver for the colour version of the
|
|
Connectix QuickCam. If you have one of these cameras, say Y here,
|
|
otherwise say N. This driver does not work with the original
|
|
monochrome QuickCam, QuickCam VC or QuickClip. It is also available
|
|
as a module (c-qcam).
|
|
Read <file:Documentation/video4linux/CQcam.txt> for more information.
|
|
|
|
config VIDEO_W9966
|
|
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
|
|
depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
|
|
help
|
|
Video4linux driver for Winbond's w9966 based Webcams.
|
|
Currently tested with the LifeView FlyCam Supra.
|
|
If you have one of these cameras, say Y here
|
|
otherwise say N.
|
|
This driver is also available as a module (w9966).
|
|
|
|
Check out <file:Documentation/video4linux/w9966.txt> for more
|
|
information.
|
|
|
|
source "drivers/media/video/cpia2/Kconfig"
|
|
|
|
config VIDEO_VINO
|
|
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
|
|
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
|
|
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
|
|
help
|
|
Say Y here to build in support for the Vino video input system found
|
|
on SGI Indy machines.
|
|
|
|
source "drivers/media/video/zoran/Kconfig"
|
|
|
|
config VIDEO_MEYE
|
|
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
|
|
depends on PCI && SONY_LAPTOP && VIDEO_V4L2
|
|
---help---
|
|
This is the video4linux driver for the Motion Eye camera found
|
|
in the Vaio Picturebook laptops. Please read the material in
|
|
<file:Documentation/video4linux/meye.txt> for more information.
|
|
|
|
If you say Y or M here, you need to say Y or M to "Sony Laptop
|
|
Extras" in the misc device section.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called meye.
|
|
|
|
source "drivers/media/video/saa7134/Kconfig"
|
|
|
|
config VIDEO_MXB
|
|
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
select VIDEO_TUNER
|
|
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
|
|
---help---
|
|
This is a video4linux driver for the 'Multimedia eXtension Board'
|
|
TV card by Siemens-Nixdorf.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mxb.
|
|
|
|
config VIDEO_HEXIUM_ORION
|
|
tristate "Hexium HV-PCI6 and Orion frame grabber"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
---help---
|
|
This is a video4linux driver for the Hexium HV-PCI6 and
|
|
Orion frame grabber cards by Hexium.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hexium_orion.
|
|
|
|
config VIDEO_HEXIUM_GEMINI
|
|
tristate "Hexium Gemini frame grabber"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
---help---
|
|
This is a video4linux driver for the Hexium Gemini frame
|
|
grabber card by Hexium. Please note that the Gemini Dual
|
|
card is *not* fully supported.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hexium_gemini.
|
|
|
|
config VIDEO_TIMBERDALE
|
|
tristate "Support for timberdale Video In/LogiWIN"
|
|
depends on VIDEO_V4L2 && I2C
|
|
select DMA_ENGINE
|
|
select TIMB_DMA
|
|
select VIDEO_ADV7180
|
|
select VIDEOBUF_DMA_CONTIG
|
|
---help---
|
|
Add support for the Video In peripherial of the timberdale FPGA.
|
|
|
|
source "drivers/media/video/cx88/Kconfig"
|
|
|
|
source "drivers/media/video/cx23885/Kconfig"
|
|
|
|
source "drivers/media/video/au0828/Kconfig"
|
|
|
|
source "drivers/media/video/ivtv/Kconfig"
|
|
|
|
source "drivers/media/video/cx18/Kconfig"
|
|
|
|
source "drivers/media/video/saa7164/Kconfig"
|
|
|
|
config VIDEO_M32R_AR
|
|
tristate "AR devices"
|
|
depends on M32R && VIDEO_V4L2
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial Retina)
|
|
camera module.
|
|
|
|
config VIDEO_M32R_AR_M64278
|
|
tristate "AR device with color module M64278(VGA)"
|
|
depends on PLAT_M32700UT
|
|
select VIDEO_M32R_AR
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial
|
|
Retina) with M64278E-800 camera module.
|
|
This module supports VGA(640x480 pixels) resolutions.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called arv.
|
|
|
|
config VIDEO_CAFE_CCIC
|
|
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
|
|
depends on PCI && I2C && VIDEO_V4L2
|
|
select VIDEO_OV7670
|
|
---help---
|
|
This is a video4linux2 driver for the Marvell 88ALP01 integrated
|
|
CMOS camera controller. This is the controller found on first-
|
|
generation OLPC systems.
|
|
|
|
config VIDEO_SR030PC30
|
|
tristate "SR030PC30 VGA camera sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This driver supports SR030PC30 VGA camera from Siliconfile
|
|
|
|
config VIDEO_VIA_CAMERA
|
|
tristate "VIAFB camera controller support"
|
|
depends on FB_VIA
|
|
select VIDEOBUF_DMA_SG
|
|
select VIDEO_OV7670
|
|
help
|
|
Driver support for the integrated camera controller in VIA
|
|
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
|
|
with ov7670 sensors.
|
|
|
|
config SOC_CAMERA
|
|
tristate "SoC camera support"
|
|
depends on VIDEO_V4L2 && HAS_DMA && I2C
|
|
select VIDEOBUF_GEN
|
|
help
|
|
SoC Camera is a common API to several cameras, not connecting
|
|
over a bus like PCI or USB. For example some i2c camera connected
|
|
directly to the data bus of an SoC.
|
|
|
|
config SOC_CAMERA_IMX074
|
|
tristate "imx074 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports IMX074 cameras from Sony
|
|
|
|
config SOC_CAMERA_MT9M001
|
|
tristate "mt9m001 support"
|
|
depends on SOC_CAMERA && I2C
|
|
select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
|
|
help
|
|
This driver supports MT9M001 cameras from Micron, monochrome
|
|
and colour models.
|
|
|
|
config SOC_CAMERA_MT9M111
|
|
tristate "mt9m111, mt9m112 and mt9m131 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports MT9M111, MT9M112 and MT9M131 cameras from
|
|
Micron/Aptina
|
|
|
|
config SOC_CAMERA_MT9T031
|
|
tristate "mt9t031 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports MT9T031 cameras from Micron.
|
|
|
|
config SOC_CAMERA_MT9T112
|
|
tristate "mt9t112 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This driver supports MT9T112 cameras from Aptina.
|
|
|
|
config SOC_CAMERA_MT9V022
|
|
tristate "mt9v022 support"
|
|
depends on SOC_CAMERA && I2C
|
|
select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
|
|
help
|
|
This driver supports MT9V022 cameras from Micron
|
|
|
|
config SOC_CAMERA_RJ54N1
|
|
tristate "rj54n1cb0c support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a rj54n1cb0c video driver
|
|
|
|
config SOC_CAMERA_TW9910
|
|
tristate "tw9910 support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a tw9910 video driver
|
|
|
|
config SOC_CAMERA_PLATFORM
|
|
tristate "platform camera support"
|
|
depends on SOC_CAMERA
|
|
help
|
|
This is a generic SoC camera platform driver, useful for testing
|
|
|
|
config SOC_CAMERA_OV2640
|
|
tristate "ov2640 camera support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a ov2640 camera driver
|
|
|
|
config SOC_CAMERA_OV6650
|
|
tristate "ov6650 sensor support"
|
|
depends on SOC_CAMERA && I2C
|
|
---help---
|
|
This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor
|
|
|
|
config SOC_CAMERA_OV772X
|
|
tristate "ov772x camera support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a ov772x camera driver
|
|
|
|
config SOC_CAMERA_OV9640
|
|
tristate "ov9640 camera support"
|
|
depends on SOC_CAMERA && I2C
|
|
help
|
|
This is a ov9640 camera driver
|
|
|
|
config MX1_VIDEO
|
|
bool
|
|
|
|
config VIDEO_MX1
|
|
tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
|
|
depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
|
|
select FIQ
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select MX1_VIDEO
|
|
---help---
|
|
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
|
|
|
|
config MX3_VIDEO
|
|
bool
|
|
|
|
config VIDEO_MX3
|
|
tristate "i.MX3x Camera Sensor Interface driver"
|
|
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select MX3_VIDEO
|
|
---help---
|
|
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
|
|
|
|
config VIDEO_PXA27x
|
|
tristate "PXA27x Quick Capture Interface driver"
|
|
depends on VIDEO_DEV && PXA27x && SOC_CAMERA
|
|
select VIDEOBUF_DMA_SG
|
|
---help---
|
|
This is a v4l2 driver for the PXA27x Quick Capture Interface
|
|
|
|
config VIDEO_SH_MOBILE_CSI2
|
|
tristate "SuperH Mobile MIPI CSI-2 Interface driver"
|
|
depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
|
|
---help---
|
|
This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
|
|
|
|
config VIDEO_SH_MOBILE_CEU
|
|
tristate "SuperH Mobile CEU Interface driver"
|
|
depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
|
|
select VIDEOBUF_DMA_CONTIG
|
|
---help---
|
|
This is a v4l2 driver for the SuperH Mobile CEU Interface
|
|
|
|
config VIDEO_OMAP1
|
|
tristate "OMAP1 Camera Interface driver"
|
|
depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select VIDEOBUF_DMA_SG
|
|
---help---
|
|
This is a v4l2 driver for the TI OMAP1 camera interface
|
|
|
|
config VIDEO_OMAP2
|
|
tristate "OMAP2 Camera Capture Interface driver"
|
|
depends on VIDEO_DEV && ARCH_OMAP2
|
|
select VIDEOBUF_DMA_SG
|
|
---help---
|
|
This is a v4l2 driver for the TI OMAP2 camera capture interface
|
|
|
|
config VIDEO_MX2_HOSTSUPPORT
|
|
bool
|
|
|
|
config VIDEO_MX2
|
|
tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
|
|
depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25)
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select VIDEO_MX2_HOSTSUPPORT
|
|
---help---
|
|
This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
|
|
Interface
|
|
|
|
|
|
#
|
|
# USB Multimedia device configuration
|
|
#
|
|
|
|
menuconfig V4L_USB_DRIVERS
|
|
bool "V4L USB devices"
|
|
depends on USB
|
|
default y
|
|
|
|
if V4L_USB_DRIVERS && USB
|
|
|
|
source "drivers/media/video/uvc/Kconfig"
|
|
|
|
source "drivers/media/video/gspca/Kconfig"
|
|
|
|
source "drivers/media/video/pvrusb2/Kconfig"
|
|
|
|
source "drivers/media/video/hdpvr/Kconfig"
|
|
|
|
source "drivers/media/video/em28xx/Kconfig"
|
|
|
|
source "drivers/media/video/tlg2300/Kconfig"
|
|
|
|
source "drivers/media/video/cx231xx/Kconfig"
|
|
|
|
source "drivers/media/video/usbvision/Kconfig"
|
|
|
|
source "drivers/media/video/et61x251/Kconfig"
|
|
|
|
source "drivers/media/video/sn9c102/Kconfig"
|
|
|
|
source "drivers/media/video/pwc/Kconfig"
|
|
|
|
config USB_ZR364XX
|
|
tristate "USB ZR364XX Camera support"
|
|
depends on VIDEO_V4L2
|
|
select VIDEOBUF_GEN
|
|
select VIDEOBUF_VMALLOC
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port.
|
|
See <file:Documentation/video4linux/zr364xx.txt> for more info
|
|
and list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zr364xx.
|
|
|
|
config USB_STKWEBCAM
|
|
tristate "USB Syntek DC1125 Camera support"
|
|
depends on VIDEO_V4L2 && EXPERIMENTAL
|
|
---help---
|
|
Say Y here if you want to use this type of camera.
|
|
Supported devices are typically found in some Asus laptops,
|
|
with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
|
|
may be supported by the stk11xx driver, from which this is
|
|
derived, see <http://sourceforge.net/projects/syntekdriver/>
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stkwebcam.
|
|
|
|
config USB_S2255
|
|
tristate "USB Sensoray 2255 video capture device"
|
|
depends on VIDEO_V4L2
|
|
select VIDEOBUF_VMALLOC
|
|
default n
|
|
help
|
|
Say Y here if you want support for the Sensoray 2255 USB device.
|
|
This driver can be compiled as a module, called s2255drv.
|
|
|
|
endif # V4L_USB_DRIVERS
|
|
endif # VIDEO_CAPTURE_DRIVERS
|
|
|
|
menuconfig V4L_MEM2MEM_DRIVERS
|
|
bool "Memory-to-memory multimedia devices"
|
|
depends on VIDEO_V4L2
|
|
default n
|
|
---help---
|
|
Say Y here to enable selecting drivers for V4L devices that
|
|
use system memory for both source and destination buffers, as opposed
|
|
to capture and output drivers, which use memory buffers for just
|
|
one of those.
|
|
|
|
if V4L_MEM2MEM_DRIVERS
|
|
|
|
config VIDEO_MEM2MEM_TESTDEV
|
|
tristate "Virtual test device for mem2mem framework"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
select VIDEOBUF_VMALLOC
|
|
select V4L2_MEM2MEM_DEV
|
|
default n
|
|
---help---
|
|
This is a virtual test device for the memory-to-memory driver
|
|
framework.
|
|
|
|
config VIDEO_SAMSUNG_S5P_FIMC
|
|
tristate "Samsung S5P FIMC (video postprocessor) driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
|
|
select VIDEOBUF_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for the S5P camera interface
|
|
(video postprocessor)
|
|
|
|
endif # V4L_MEM2MEM_DRIVERS
|