![Chris Wilson](/assets/img/avatar_default.png)
Quoting the BSpec from time immemorial: PIPEACONF, bits 28:27: Frame Start Delay (Debug) Used to delay the frame start signal that is sent to the display planes. Care must be taken to insure that there are enough lines during VBLANK to support this setting. An instance of the BIOS leaving these bits set was found in the wild, where it caused our modesetting to go all squiffy and skewiff. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47271 Reported-and-tested-by: Eva Wang <evawang@linpus.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43012 Reported-and-tested-by: Carl Richell <carl@system76.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
9390 lines
253 KiB
C
9390 lines
253 KiB
C
/*
|
|
* Copyright © 2006-2007 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eric Anholt <eric@anholt.net>
|
|
*/
|
|
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vgaarb.h>
|
|
#include <drm/drm_edid.h>
|
|
#include "drmP.h"
|
|
#include "intel_drv.h"
|
|
#include "i915_drm.h"
|
|
#include "i915_drv.h"
|
|
#include "i915_trace.h"
|
|
#include "drm_dp_helper.h"
|
|
#include "drm_crtc_helper.h"
|
|
#include <linux/dma_remapping.h>
|
|
|
|
#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
|
|
|
|
bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
|
|
static void intel_update_watermarks(struct drm_device *dev);
|
|
static void intel_increase_pllclock(struct drm_crtc *crtc);
|
|
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
|
|
|
|
typedef struct {
|
|
/* given values */
|
|
int n;
|
|
int m1, m2;
|
|
int p1, p2;
|
|
/* derived values */
|
|
int dot;
|
|
int vco;
|
|
int m;
|
|
int p;
|
|
} intel_clock_t;
|
|
|
|
typedef struct {
|
|
int min, max;
|
|
} intel_range_t;
|
|
|
|
typedef struct {
|
|
int dot_limit;
|
|
int p2_slow, p2_fast;
|
|
} intel_p2_t;
|
|
|
|
#define INTEL_P2_NUM 2
|
|
typedef struct intel_limit intel_limit_t;
|
|
struct intel_limit {
|
|
intel_range_t dot, vco, n, m, m1, m2, p, p1;
|
|
intel_p2_t p2;
|
|
bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
|
|
int, int, intel_clock_t *, intel_clock_t *);
|
|
};
|
|
|
|
/* FDI */
|
|
#define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */
|
|
|
|
static bool
|
|
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock);
|
|
static bool
|
|
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock);
|
|
|
|
static bool
|
|
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock);
|
|
static bool
|
|
intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock);
|
|
|
|
static inline u32 /* units of 100MHz */
|
|
intel_fdi_link_freq(struct drm_device *dev)
|
|
{
|
|
if (IS_GEN5(dev)) {
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
|
|
} else
|
|
return 27;
|
|
}
|
|
|
|
static const intel_limit_t intel_limits_i8xx_dvo = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 930000, .max = 1400000 },
|
|
.n = { .min = 3, .max = 16 },
|
|
.m = { .min = 96, .max = 140 },
|
|
.m1 = { .min = 18, .max = 26 },
|
|
.m2 = { .min = 6, .max = 16 },
|
|
.p = { .min = 4, .max = 128 },
|
|
.p1 = { .min = 2, .max = 33 },
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 4, .p2_fast = 2 },
|
|
.find_pll = intel_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i8xx_lvds = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 930000, .max = 1400000 },
|
|
.n = { .min = 3, .max = 16 },
|
|
.m = { .min = 96, .max = 140 },
|
|
.m1 = { .min = 18, .max = 26 },
|
|
.m2 = { .min = 6, .max = 16 },
|
|
.p = { .min = 4, .max = 128 },
|
|
.p1 = { .min = 1, .max = 6 },
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 14, .p2_fast = 7 },
|
|
.find_pll = intel_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i9xx_sdvo = {
|
|
.dot = { .min = 20000, .max = 400000 },
|
|
.vco = { .min = 1400000, .max = 2800000 },
|
|
.n = { .min = 1, .max = 6 },
|
|
.m = { .min = 70, .max = 120 },
|
|
.m1 = { .min = 10, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 200000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
.find_pll = intel_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i9xx_lvds = {
|
|
.dot = { .min = 20000, .max = 400000 },
|
|
.vco = { .min = 1400000, .max = 2800000 },
|
|
.n = { .min = 1, .max = 6 },
|
|
.m = { .min = 70, .max = 120 },
|
|
.m1 = { .min = 10, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 7, .max = 98 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 112000,
|
|
.p2_slow = 14, .p2_fast = 7 },
|
|
.find_pll = intel_find_best_PLL,
|
|
};
|
|
|
|
|
|
static const intel_limit_t intel_limits_g4x_sdvo = {
|
|
.dot = { .min = 25000, .max = 270000 },
|
|
.vco = { .min = 1750000, .max = 3500000},
|
|
.n = { .min = 1, .max = 4 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 17, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 10, .max = 30 },
|
|
.p1 = { .min = 1, .max = 3},
|
|
.p2 = { .dot_limit = 270000,
|
|
.p2_slow = 10,
|
|
.p2_fast = 10
|
|
},
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_hdmi = {
|
|
.dot = { .min = 22000, .max = 400000 },
|
|
.vco = { .min = 1750000, .max = 3500000},
|
|
.n = { .min = 1, .max = 4 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 16, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8},
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
|
|
.dot = { .min = 20000, .max = 115000 },
|
|
.vco = { .min = 1750000, .max = 3500000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 17, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 28, .max = 112 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 0,
|
|
.p2_slow = 14, .p2_fast = 14
|
|
},
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
|
|
.dot = { .min = 80000, .max = 224000 },
|
|
.vco = { .min = 1750000, .max = 3500000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 17, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 14, .max = 42 },
|
|
.p1 = { .min = 2, .max = 6 },
|
|
.p2 = { .dot_limit = 0,
|
|
.p2_slow = 7, .p2_fast = 7
|
|
},
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_display_port = {
|
|
.dot = { .min = 161670, .max = 227000 },
|
|
.vco = { .min = 1750000, .max = 3500000},
|
|
.n = { .min = 1, .max = 2 },
|
|
.m = { .min = 97, .max = 108 },
|
|
.m1 = { .min = 0x10, .max = 0x12 },
|
|
.m2 = { .min = 0x05, .max = 0x06 },
|
|
.p = { .min = 10, .max = 20 },
|
|
.p1 = { .min = 1, .max = 2},
|
|
.p2 = { .dot_limit = 0,
|
|
.p2_slow = 10, .p2_fast = 10 },
|
|
.find_pll = intel_find_pll_g4x_dp,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_pineview_sdvo = {
|
|
.dot = { .min = 20000, .max = 400000},
|
|
.vco = { .min = 1700000, .max = 3500000 },
|
|
/* Pineview's Ncounter is a ring counter */
|
|
.n = { .min = 3, .max = 6 },
|
|
.m = { .min = 2, .max = 256 },
|
|
/* Pineview only has one combined m divider, which we treat as m2. */
|
|
.m1 = { .min = 0, .max = 0 },
|
|
.m2 = { .min = 0, .max = 254 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 200000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
.find_pll = intel_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_pineview_lvds = {
|
|
.dot = { .min = 20000, .max = 400000 },
|
|
.vco = { .min = 1700000, .max = 3500000 },
|
|
.n = { .min = 3, .max = 6 },
|
|
.m = { .min = 2, .max = 256 },
|
|
.m1 = { .min = 0, .max = 0 },
|
|
.m2 = { .min = 0, .max = 254 },
|
|
.p = { .min = 7, .max = 112 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 112000,
|
|
.p2_slow = 14, .p2_fast = 14 },
|
|
.find_pll = intel_find_best_PLL,
|
|
};
|
|
|
|
/* Ironlake / Sandybridge
|
|
*
|
|
* We calculate clock using (register_value + 2) for N/M1/M2, so here
|
|
* the range value for them is (actual_value - 2).
|
|
*/
|
|
static const intel_limit_t intel_limits_ironlake_dac = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 5 },
|
|
.m = { .min = 79, .max = 127 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_single_lvds = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 79, .max = 118 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 28, .max = 112 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 14, .p2_fast = 14 },
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_dual_lvds = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 79, .max = 127 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 14, .max = 56 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 7, .p2_fast = 7 },
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
/* LVDS 100mhz refclk limits. */
|
|
static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 2 },
|
|
.m = { .min = 79, .max = 126 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 28, .max = 112 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 14, .p2_fast = 14 },
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 79, .max = 126 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 14, .max = 42 },
|
|
.p1 = { .min = 2, .max = 6 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 7, .p2_fast = 7 },
|
|
.find_pll = intel_g4x_find_best_PLL,
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_display_port = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000},
|
|
.n = { .min = 1, .max = 2 },
|
|
.m = { .min = 81, .max = 90 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 10, .max = 20 },
|
|
.p1 = { .min = 1, .max = 2},
|
|
.p2 = { .dot_limit = 0,
|
|
.p2_slow = 10, .p2_fast = 10 },
|
|
.find_pll = intel_find_pll_ironlake_dp,
|
|
};
|
|
|
|
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
|
|
int refclk)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
const intel_limit_t *limit;
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
|
if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
|
|
LVDS_CLKB_POWER_UP) {
|
|
/* LVDS dual channel */
|
|
if (refclk == 100000)
|
|
limit = &intel_limits_ironlake_dual_lvds_100m;
|
|
else
|
|
limit = &intel_limits_ironlake_dual_lvds;
|
|
} else {
|
|
if (refclk == 100000)
|
|
limit = &intel_limits_ironlake_single_lvds_100m;
|
|
else
|
|
limit = &intel_limits_ironlake_single_lvds;
|
|
}
|
|
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
|
|
HAS_eDP)
|
|
limit = &intel_limits_ironlake_display_port;
|
|
else
|
|
limit = &intel_limits_ironlake_dac;
|
|
|
|
return limit;
|
|
}
|
|
|
|
static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
const intel_limit_t *limit;
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
|
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
|
|
LVDS_CLKB_POWER_UP)
|
|
/* LVDS with dual channel */
|
|
limit = &intel_limits_g4x_dual_channel_lvds;
|
|
else
|
|
/* LVDS with dual channel */
|
|
limit = &intel_limits_g4x_single_channel_lvds;
|
|
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
|
|
limit = &intel_limits_g4x_hdmi;
|
|
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
|
|
limit = &intel_limits_g4x_sdvo;
|
|
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
|
|
limit = &intel_limits_g4x_display_port;
|
|
} else /* The option is for other outputs */
|
|
limit = &intel_limits_i9xx_sdvo;
|
|
|
|
return limit;
|
|
}
|
|
|
|
static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
const intel_limit_t *limit;
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
limit = intel_ironlake_limit(crtc, refclk);
|
|
else if (IS_G4X(dev)) {
|
|
limit = intel_g4x_limit(crtc);
|
|
} else if (IS_PINEVIEW(dev)) {
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
|
|
limit = &intel_limits_pineview_lvds;
|
|
else
|
|
limit = &intel_limits_pineview_sdvo;
|
|
} else if (!IS_GEN2(dev)) {
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
|
|
limit = &intel_limits_i9xx_lvds;
|
|
else
|
|
limit = &intel_limits_i9xx_sdvo;
|
|
} else {
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
|
|
limit = &intel_limits_i8xx_lvds;
|
|
else
|
|
limit = &intel_limits_i8xx_dvo;
|
|
}
|
|
return limit;
|
|
}
|
|
|
|
/* m1 is reserved as 0 in Pineview, n is a ring counter */
|
|
static void pineview_clock(int refclk, intel_clock_t *clock)
|
|
{
|
|
clock->m = clock->m2 + 2;
|
|
clock->p = clock->p1 * clock->p2;
|
|
clock->vco = refclk * clock->m / clock->n;
|
|
clock->dot = clock->vco / clock->p;
|
|
}
|
|
|
|
static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
|
|
{
|
|
if (IS_PINEVIEW(dev)) {
|
|
pineview_clock(refclk, clock);
|
|
return;
|
|
}
|
|
clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
|
|
clock->p = clock->p1 * clock->p2;
|
|
clock->vco = refclk * clock->m / (clock->n + 2);
|
|
clock->dot = clock->vco / clock->p;
|
|
}
|
|
|
|
/**
|
|
* Returns whether any output on the specified pipe is of the specified type
|
|
*/
|
|
bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *encoder;
|
|
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
|
|
if (encoder->base.crtc == crtc && encoder->type == type)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
|
|
/**
|
|
* Returns whether the given set of divisors are valid for a given refclk with
|
|
* the given connectors.
|
|
*/
|
|
|
|
static bool intel_PLL_is_valid(struct drm_device *dev,
|
|
const intel_limit_t *limit,
|
|
const intel_clock_t *clock)
|
|
{
|
|
if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
|
|
INTELPllInvalid("p1 out of range\n");
|
|
if (clock->p < limit->p.min || limit->p.max < clock->p)
|
|
INTELPllInvalid("p out of range\n");
|
|
if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
|
|
INTELPllInvalid("m2 out of range\n");
|
|
if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
|
|
INTELPllInvalid("m1 out of range\n");
|
|
if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
|
|
INTELPllInvalid("m1 <= m2\n");
|
|
if (clock->m < limit->m.min || limit->m.max < clock->m)
|
|
INTELPllInvalid("m out of range\n");
|
|
if (clock->n < limit->n.min || limit->n.max < clock->n)
|
|
INTELPllInvalid("n out of range\n");
|
|
if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
|
|
INTELPllInvalid("vco out of range\n");
|
|
/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
|
|
* connector, etc., rather than just a single range.
|
|
*/
|
|
if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
|
|
INTELPllInvalid("dot out of range\n");
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
intel_clock_t clock;
|
|
int err = target;
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
|
|
(I915_READ(LVDS)) != 0) {
|
|
/*
|
|
* For LVDS, if the panel is on, just rely on its current
|
|
* settings for dual-channel. We haven't figured out how to
|
|
* reliably set up different single/dual channel state, if we
|
|
* even can.
|
|
*/
|
|
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
|
|
LVDS_CLKB_POWER_UP)
|
|
clock.p2 = limit->p2.p2_fast;
|
|
else
|
|
clock.p2 = limit->p2.p2_slow;
|
|
} else {
|
|
if (target < limit->p2.dot_limit)
|
|
clock.p2 = limit->p2.p2_slow;
|
|
else
|
|
clock.p2 = limit->p2.p2_fast;
|
|
}
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
|
|
clock.m1++) {
|
|
for (clock.m2 = limit->m2.min;
|
|
clock.m2 <= limit->m2.max; clock.m2++) {
|
|
/* m1 is always 0 in Pineview */
|
|
if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
|
|
break;
|
|
for (clock.n = limit->n.min;
|
|
clock.n <= limit->n.max; clock.n++) {
|
|
for (clock.p1 = limit->p1.min;
|
|
clock.p1 <= limit->p1.max; clock.p1++) {
|
|
int this_err;
|
|
|
|
intel_clock(dev, refclk, &clock);
|
|
if (!intel_PLL_is_valid(dev, limit,
|
|
&clock))
|
|
continue;
|
|
if (match_clock &&
|
|
clock.p != match_clock->p)
|
|
continue;
|
|
|
|
this_err = abs(clock.dot - target);
|
|
if (this_err < err) {
|
|
*best_clock = clock;
|
|
err = this_err;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return (err != target);
|
|
}
|
|
|
|
static bool
|
|
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
intel_clock_t clock;
|
|
int max_n;
|
|
bool found;
|
|
/* approximately equals target * 0.00585 */
|
|
int err_most = (target >> 8) + (target >> 9);
|
|
found = false;
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
|
int lvds_reg;
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
lvds_reg = PCH_LVDS;
|
|
else
|
|
lvds_reg = LVDS;
|
|
if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
|
|
LVDS_CLKB_POWER_UP)
|
|
clock.p2 = limit->p2.p2_fast;
|
|
else
|
|
clock.p2 = limit->p2.p2_slow;
|
|
} else {
|
|
if (target < limit->p2.dot_limit)
|
|
clock.p2 = limit->p2.p2_slow;
|
|
else
|
|
clock.p2 = limit->p2.p2_fast;
|
|
}
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
max_n = limit->n.max;
|
|
/* based on hardware requirement, prefer smaller n to precision */
|
|
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
|
|
/* based on hardware requirement, prefere larger m1,m2 */
|
|
for (clock.m1 = limit->m1.max;
|
|
clock.m1 >= limit->m1.min; clock.m1--) {
|
|
for (clock.m2 = limit->m2.max;
|
|
clock.m2 >= limit->m2.min; clock.m2--) {
|
|
for (clock.p1 = limit->p1.max;
|
|
clock.p1 >= limit->p1.min; clock.p1--) {
|
|
int this_err;
|
|
|
|
intel_clock(dev, refclk, &clock);
|
|
if (!intel_PLL_is_valid(dev, limit,
|
|
&clock))
|
|
continue;
|
|
if (match_clock &&
|
|
clock.p != match_clock->p)
|
|
continue;
|
|
|
|
this_err = abs(clock.dot - target);
|
|
if (this_err < err_most) {
|
|
*best_clock = clock;
|
|
err_most = this_err;
|
|
max_n = clock.n;
|
|
found = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return found;
|
|
}
|
|
|
|
static bool
|
|
intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
intel_clock_t clock;
|
|
|
|
if (target < 200000) {
|
|
clock.n = 1;
|
|
clock.p1 = 2;
|
|
clock.p2 = 10;
|
|
clock.m1 = 12;
|
|
clock.m2 = 9;
|
|
} else {
|
|
clock.n = 2;
|
|
clock.p1 = 1;
|
|
clock.p2 = 10;
|
|
clock.m1 = 14;
|
|
clock.m2 = 8;
|
|
}
|
|
intel_clock(dev, refclk, &clock);
|
|
memcpy(best_clock, &clock, sizeof(intel_clock_t));
|
|
return true;
|
|
}
|
|
|
|
/* DisplayPort has only two frequencies, 162MHz and 270MHz */
|
|
static bool
|
|
intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
intel_clock_t clock;
|
|
if (target < 200000) {
|
|
clock.p1 = 2;
|
|
clock.p2 = 10;
|
|
clock.n = 2;
|
|
clock.m1 = 23;
|
|
clock.m2 = 8;
|
|
} else {
|
|
clock.p1 = 1;
|
|
clock.p2 = 10;
|
|
clock.n = 1;
|
|
clock.m1 = 14;
|
|
clock.m2 = 2;
|
|
}
|
|
clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
|
|
clock.p = (clock.p1 * clock.p2);
|
|
clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
|
|
clock.vco = 0;
|
|
memcpy(best_clock, &clock, sizeof(intel_clock_t));
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* intel_wait_for_vblank - wait for vblank on a given pipe
|
|
* @dev: drm device
|
|
* @pipe: pipe to wait for
|
|
*
|
|
* Wait for vblank to occur on a given pipe. Needed for various bits of
|
|
* mode setting code.
|
|
*/
|
|
void intel_wait_for_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipestat_reg = PIPESTAT(pipe);
|
|
|
|
/* Clear existing vblank status. Note this will clear any other
|
|
* sticky status fields as well.
|
|
*
|
|
* This races with i915_driver_irq_handler() with the result
|
|
* that either function could miss a vblank event. Here it is not
|
|
* fatal, as we will either wait upon the next vblank interrupt or
|
|
* timeout. Generally speaking intel_wait_for_vblank() is only
|
|
* called during modeset at which time the GPU should be idle and
|
|
* should *not* be performing page flips and thus not waiting on
|
|
* vblanks...
|
|
* Currently, the result of us stealing a vblank from the irq
|
|
* handler is that a single frame will be skipped during swapbuffers.
|
|
*/
|
|
I915_WRITE(pipestat_reg,
|
|
I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
|
|
|
|
/* Wait for vblank interrupt bit to set */
|
|
if (wait_for(I915_READ(pipestat_reg) &
|
|
PIPE_VBLANK_INTERRUPT_STATUS,
|
|
50))
|
|
DRM_DEBUG_KMS("vblank wait timed out\n");
|
|
}
|
|
|
|
/*
|
|
* intel_wait_for_pipe_off - wait for pipe to turn off
|
|
* @dev: drm device
|
|
* @pipe: pipe to wait for
|
|
*
|
|
* After disabling a pipe, we can't wait for vblank in the usual way,
|
|
* spinning on the vblank interrupt status bit, since we won't actually
|
|
* see an interrupt when the pipe is disabled.
|
|
*
|
|
* On Gen4 and above:
|
|
* wait for the pipe register state bit to turn off
|
|
*
|
|
* Otherwise:
|
|
* wait for the display line value to settle (it usually
|
|
* ends up stopping at the start of the next frame).
|
|
*
|
|
*/
|
|
void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
int reg = PIPECONF(pipe);
|
|
|
|
/* Wait for the Pipe State to go off */
|
|
if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
|
|
100))
|
|
DRM_DEBUG_KMS("pipe_off wait timed out\n");
|
|
} else {
|
|
u32 last_line;
|
|
int reg = PIPEDSL(pipe);
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
/* Wait for the display line to settle */
|
|
do {
|
|
last_line = I915_READ(reg) & DSL_LINEMASK;
|
|
mdelay(5);
|
|
} while (((I915_READ(reg) & DSL_LINEMASK) != last_line) &&
|
|
time_after(timeout, jiffies));
|
|
if (time_after(jiffies, timeout))
|
|
DRM_DEBUG_KMS("pipe_off wait timed out\n");
|
|
}
|
|
}
|
|
|
|
static const char *state_string(bool enabled)
|
|
{
|
|
return enabled ? "on" : "off";
|
|
}
|
|
|
|
/* Only for pre-ILK configs */
|
|
static void assert_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
reg = DPLL(pipe);
|
|
val = I915_READ(reg);
|
|
cur_state = !!(val & DPLL_VCO_ENABLE);
|
|
WARN(cur_state != state,
|
|
"PLL state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
|
|
#define assert_pll_disabled(d, p) assert_pll(d, p, false)
|
|
|
|
/* For ILK+ */
|
|
static void assert_pch_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
u32 pch_dpll;
|
|
|
|
pch_dpll = I915_READ(PCH_DPLL_SEL);
|
|
|
|
/* Make sure the selected PLL is enabled to the transcoder */
|
|
WARN(!((pch_dpll >> (4 * pipe)) & 8),
|
|
"transcoder %d PLL not enabled\n", pipe);
|
|
|
|
/* Convert the transcoder pipe number to a pll pipe number */
|
|
pipe = (pch_dpll >> (4 * pipe)) & 1;
|
|
}
|
|
|
|
reg = PCH_DPLL(pipe);
|
|
val = I915_READ(reg);
|
|
cur_state = !!(val & DPLL_VCO_ENABLE);
|
|
WARN(cur_state != state,
|
|
"PCH PLL state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
|
|
#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)
|
|
|
|
static void assert_fdi_tx(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
reg = FDI_TX_CTL(pipe);
|
|
val = I915_READ(reg);
|
|
cur_state = !!(val & FDI_TX_ENABLE);
|
|
WARN(cur_state != state,
|
|
"FDI TX state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
|
|
#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
|
|
|
|
static void assert_fdi_rx(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
val = I915_READ(reg);
|
|
cur_state = !!(val & FDI_RX_ENABLE);
|
|
WARN(cur_state != state,
|
|
"FDI RX state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
|
|
#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
|
|
|
|
static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/* ILK FDI PLL is always enabled */
|
|
if (dev_priv->info->gen == 5)
|
|
return;
|
|
|
|
reg = FDI_TX_CTL(pipe);
|
|
val = I915_READ(reg);
|
|
WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
|
|
}
|
|
|
|
static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
val = I915_READ(reg);
|
|
WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
|
|
}
|
|
|
|
static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int pp_reg, lvds_reg;
|
|
u32 val;
|
|
enum pipe panel_pipe = PIPE_A;
|
|
bool locked = true;
|
|
|
|
if (HAS_PCH_SPLIT(dev_priv->dev)) {
|
|
pp_reg = PCH_PP_CONTROL;
|
|
lvds_reg = PCH_LVDS;
|
|
} else {
|
|
pp_reg = PP_CONTROL;
|
|
lvds_reg = LVDS;
|
|
}
|
|
|
|
val = I915_READ(pp_reg);
|
|
if (!(val & PANEL_POWER_ON) ||
|
|
((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
|
|
locked = false;
|
|
|
|
if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
|
|
panel_pipe = PIPE_B;
|
|
|
|
WARN(panel_pipe == pipe && locked,
|
|
"panel assertion failure, pipe %c regs locked\n",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
void assert_pipe(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
/* if we need the pipe A quirk it must be always on */
|
|
if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
|
|
state = true;
|
|
|
|
reg = PIPECONF(pipe);
|
|
val = I915_READ(reg);
|
|
cur_state = !!(val & PIPECONF_ENABLE);
|
|
WARN(cur_state != state,
|
|
"pipe %c assertion failure (expected %s, current %s)\n",
|
|
pipe_name(pipe), state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
static void assert_plane(struct drm_i915_private *dev_priv,
|
|
enum plane plane, bool state)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
reg = DSPCNTR(plane);
|
|
val = I915_READ(reg);
|
|
cur_state = !!(val & DISPLAY_PLANE_ENABLE);
|
|
WARN(cur_state != state,
|
|
"plane %c assertion failure (expected %s, current %s)\n",
|
|
plane_name(plane), state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
#define assert_plane_enabled(d, p) assert_plane(d, p, true)
|
|
#define assert_plane_disabled(d, p) assert_plane(d, p, false)
|
|
|
|
static void assert_planes_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg, i;
|
|
u32 val;
|
|
int cur_pipe;
|
|
|
|
/* Planes are fixed to pipes on ILK+ */
|
|
if (HAS_PCH_SPLIT(dev_priv->dev)) {
|
|
reg = DSPCNTR(pipe);
|
|
val = I915_READ(reg);
|
|
WARN((val & DISPLAY_PLANE_ENABLE),
|
|
"plane %c assertion failure, should be disabled but not\n",
|
|
plane_name(pipe));
|
|
return;
|
|
}
|
|
|
|
/* Need to check both planes against the pipe */
|
|
for (i = 0; i < 2; i++) {
|
|
reg = DSPCNTR(i);
|
|
val = I915_READ(reg);
|
|
cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
|
|
DISPPLANE_SEL_PIPE_SHIFT;
|
|
WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
|
|
"plane %c assertion failure, should be off on pipe %c but is still active\n",
|
|
plane_name(i), pipe_name(pipe));
|
|
}
|
|
}
|
|
|
|
static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
bool enabled;
|
|
|
|
val = I915_READ(PCH_DREF_CONTROL);
|
|
enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
|
|
DREF_SUPERSPREAD_SOURCE_MASK));
|
|
WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
|
|
}
|
|
|
|
static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
bool enabled;
|
|
|
|
reg = TRANSCONF(pipe);
|
|
val = I915_READ(reg);
|
|
enabled = !!(val & TRANS_ENABLE);
|
|
WARN(enabled,
|
|
"transcoder assertion failed, should be off on pipe %c but is still active\n",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 port_sel, u32 val)
|
|
{
|
|
if ((val & DP_PORT_EN) == 0)
|
|
return false;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
|
|
u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
|
|
if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
|
|
return false;
|
|
} else {
|
|
if ((val & DP_PIPE_MASK) != (pipe << 30))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 val)
|
|
{
|
|
if ((val & PORT_ENABLE) == 0)
|
|
return false;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 val)
|
|
{
|
|
if ((val & LVDS_PORT_EN) == 0)
|
|
return false;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 val)
|
|
{
|
|
if ((val & ADPA_DAC_ENABLE) == 0)
|
|
return false;
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, int reg, u32 port_sel)
|
|
{
|
|
u32 val = I915_READ(reg);
|
|
WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
|
|
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
|
|
reg, pipe_name(pipe));
|
|
}
|
|
|
|
static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, int reg)
|
|
{
|
|
u32 val = I915_READ(reg);
|
|
WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
|
|
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
|
|
reg, pipe_name(pipe));
|
|
}
|
|
|
|
static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
|
|
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
|
|
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
|
|
|
|
reg = PCH_ADPA;
|
|
val = I915_READ(reg);
|
|
WARN(adpa_pipe_enabled(dev_priv, val, pipe),
|
|
"PCH VGA enabled on transcoder %c, should be disabled\n",
|
|
pipe_name(pipe));
|
|
|
|
reg = PCH_LVDS;
|
|
val = I915_READ(reg);
|
|
WARN(lvds_pipe_enabled(dev_priv, val, pipe),
|
|
"PCH LVDS enabled on transcoder %c, should be disabled\n",
|
|
pipe_name(pipe));
|
|
|
|
assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
|
|
assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
|
|
assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
|
|
}
|
|
|
|
/**
|
|
* intel_enable_pll - enable a PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to enable
|
|
*
|
|
* Enable @pipe's PLL so we can start pumping pixels from a plane. Check to
|
|
* make sure the PLL reg is writable first though, since the panel write
|
|
* protect mechanism may be enabled.
|
|
*
|
|
* Note! This is for pre-ILK only.
|
|
*/
|
|
static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/* No really, not for ILK+ */
|
|
BUG_ON(dev_priv->info->gen >= 5);
|
|
|
|
/* PLL is protected by panel, make sure we can write it */
|
|
if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
|
|
assert_panel_unlocked(dev_priv, pipe);
|
|
|
|
reg = DPLL(pipe);
|
|
val = I915_READ(reg);
|
|
val |= DPLL_VCO_ENABLE;
|
|
|
|
/* We do this three times for luck */
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
}
|
|
|
|
/**
|
|
* intel_disable_pll - disable a PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to disable
|
|
*
|
|
* Disable the PLL for @pipe, making sure the pipe is off first.
|
|
*
|
|
* Note! This is for pre-ILK only.
|
|
*/
|
|
static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/* Don't disable pipe A or pipe A PLLs if needed */
|
|
if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
|
|
return;
|
|
|
|
/* Make sure the pipe isn't still relying on us */
|
|
assert_pipe_disabled(dev_priv, pipe);
|
|
|
|
reg = DPLL(pipe);
|
|
val = I915_READ(reg);
|
|
val &= ~DPLL_VCO_ENABLE;
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
/**
|
|
* intel_enable_pch_pll - enable PCH PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to enable
|
|
*
|
|
* The PCH PLL needs to be enabled before the PCH transcoder, since it
|
|
* drives the transcoder clock.
|
|
*/
|
|
static void intel_enable_pch_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
if (pipe > 1)
|
|
return;
|
|
|
|
/* PCH only available on ILK+ */
|
|
BUG_ON(dev_priv->info->gen < 5);
|
|
|
|
/* PCH refclock must be enabled first */
|
|
assert_pch_refclk_enabled(dev_priv);
|
|
|
|
reg = PCH_DPLL(pipe);
|
|
val = I915_READ(reg);
|
|
val |= DPLL_VCO_ENABLE;
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
udelay(200);
|
|
}
|
|
|
|
static void intel_disable_pch_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val, pll_mask = TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL,
|
|
pll_sel = TRANSC_DPLL_ENABLE;
|
|
|
|
if (pipe > 1)
|
|
return;
|
|
|
|
/* PCH only available on ILK+ */
|
|
BUG_ON(dev_priv->info->gen < 5);
|
|
|
|
/* Make sure transcoder isn't still depending on us */
|
|
assert_transcoder_disabled(dev_priv, pipe);
|
|
|
|
if (pipe == 0)
|
|
pll_sel |= TRANSC_DPLLA_SEL;
|
|
else if (pipe == 1)
|
|
pll_sel |= TRANSC_DPLLB_SEL;
|
|
|
|
|
|
if ((I915_READ(PCH_DPLL_SEL) & pll_mask) == pll_sel)
|
|
return;
|
|
|
|
reg = PCH_DPLL(pipe);
|
|
val = I915_READ(reg);
|
|
val &= ~DPLL_VCO_ENABLE;
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
udelay(200);
|
|
}
|
|
|
|
static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val, pipeconf_val;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
|
|
/* PCH only available on ILK+ */
|
|
BUG_ON(dev_priv->info->gen < 5);
|
|
|
|
/* Make sure PCH DPLL is enabled */
|
|
assert_pch_pll_enabled(dev_priv, pipe);
|
|
|
|
/* FDI must be feeding us bits for PCH ports */
|
|
assert_fdi_tx_enabled(dev_priv, pipe);
|
|
assert_fdi_rx_enabled(dev_priv, pipe);
|
|
|
|
reg = TRANSCONF(pipe);
|
|
val = I915_READ(reg);
|
|
pipeconf_val = I915_READ(PIPECONF(pipe));
|
|
|
|
if (HAS_PCH_IBX(dev_priv->dev)) {
|
|
/*
|
|
* make the BPC in transcoder be consistent with
|
|
* that in pipeconf reg.
|
|
*/
|
|
val &= ~PIPE_BPC_MASK;
|
|
val |= pipeconf_val & PIPE_BPC_MASK;
|
|
}
|
|
|
|
val &= ~TRANS_INTERLACE_MASK;
|
|
if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
|
|
if (HAS_PCH_IBX(dev_priv->dev) &&
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
|
|
val |= TRANS_LEGACY_INTERLACED_ILK;
|
|
else
|
|
val |= TRANS_INTERLACED;
|
|
else
|
|
val |= TRANS_PROGRESSIVE;
|
|
|
|
I915_WRITE(reg, val | TRANS_ENABLE);
|
|
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
|
|
DRM_ERROR("failed to enable transcoder %d\n", pipe);
|
|
}
|
|
|
|
static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/* FDI relies on the transcoder */
|
|
assert_fdi_tx_disabled(dev_priv, pipe);
|
|
assert_fdi_rx_disabled(dev_priv, pipe);
|
|
|
|
/* Ports must be off as well */
|
|
assert_pch_ports_disabled(dev_priv, pipe);
|
|
|
|
reg = TRANSCONF(pipe);
|
|
val = I915_READ(reg);
|
|
val &= ~TRANS_ENABLE;
|
|
I915_WRITE(reg, val);
|
|
/* wait for PCH transcoder off, transcoder state */
|
|
if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
|
|
DRM_ERROR("failed to disable transcoder %d\n", pipe);
|
|
}
|
|
|
|
/**
|
|
* intel_enable_pipe - enable a pipe, asserting requirements
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe to enable
|
|
* @pch_port: on ILK+, is this pipe driving a PCH port or not
|
|
*
|
|
* Enable @pipe, making sure that various hardware specific requirements
|
|
* are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
|
|
*
|
|
* @pipe should be %PIPE_A or %PIPE_B.
|
|
*
|
|
* Will wait until the pipe is actually running (i.e. first vblank) before
|
|
* returning.
|
|
*/
|
|
static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
|
|
bool pch_port)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/*
|
|
* A pipe without a PLL won't actually be able to drive bits from
|
|
* a plane. On ILK+ the pipe PLLs are integrated, so we don't
|
|
* need the check.
|
|
*/
|
|
if (!HAS_PCH_SPLIT(dev_priv->dev))
|
|
assert_pll_enabled(dev_priv, pipe);
|
|
else {
|
|
if (pch_port) {
|
|
/* if driving the PCH, we need FDI enabled */
|
|
assert_fdi_rx_pll_enabled(dev_priv, pipe);
|
|
assert_fdi_tx_pll_enabled(dev_priv, pipe);
|
|
}
|
|
/* FIXME: assert CPU port conditions for SNB+ */
|
|
}
|
|
|
|
reg = PIPECONF(pipe);
|
|
val = I915_READ(reg);
|
|
if (val & PIPECONF_ENABLE)
|
|
return;
|
|
|
|
I915_WRITE(reg, val | PIPECONF_ENABLE);
|
|
intel_wait_for_vblank(dev_priv->dev, pipe);
|
|
}
|
|
|
|
/**
|
|
* intel_disable_pipe - disable a pipe, asserting requirements
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe to disable
|
|
*
|
|
* Disable @pipe, making sure that various hardware specific requirements
|
|
* are met, if applicable, e.g. plane disabled, panel fitter off, etc.
|
|
*
|
|
* @pipe should be %PIPE_A or %PIPE_B.
|
|
*
|
|
* Will wait until the pipe has shut down before returning.
|
|
*/
|
|
static void intel_disable_pipe(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/*
|
|
* Make sure planes won't keep trying to pump pixels to us,
|
|
* or we might hang the display.
|
|
*/
|
|
assert_planes_disabled(dev_priv, pipe);
|
|
|
|
/* Don't disable pipe A or pipe A PLLs if needed */
|
|
if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
|
|
return;
|
|
|
|
reg = PIPECONF(pipe);
|
|
val = I915_READ(reg);
|
|
if ((val & PIPECONF_ENABLE) == 0)
|
|
return;
|
|
|
|
I915_WRITE(reg, val & ~PIPECONF_ENABLE);
|
|
intel_wait_for_pipe_off(dev_priv->dev, pipe);
|
|
}
|
|
|
|
/*
|
|
* Plane regs are double buffered, going from enabled->disabled needs a
|
|
* trigger in order to latch. The display address reg provides this.
|
|
*/
|
|
static void intel_flush_display_plane(struct drm_i915_private *dev_priv,
|
|
enum plane plane)
|
|
{
|
|
I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
|
|
I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
|
|
}
|
|
|
|
/**
|
|
* intel_enable_plane - enable a display plane on a given pipe
|
|
* @dev_priv: i915 private structure
|
|
* @plane: plane to enable
|
|
* @pipe: pipe being fed
|
|
*
|
|
* Enable @plane on @pipe, making sure that @pipe is running first.
|
|
*/
|
|
static void intel_enable_plane(struct drm_i915_private *dev_priv,
|
|
enum plane plane, enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
/* If the pipe isn't enabled, we can't pump pixels and may hang */
|
|
assert_pipe_enabled(dev_priv, pipe);
|
|
|
|
reg = DSPCNTR(plane);
|
|
val = I915_READ(reg);
|
|
if (val & DISPLAY_PLANE_ENABLE)
|
|
return;
|
|
|
|
I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
|
|
intel_flush_display_plane(dev_priv, plane);
|
|
intel_wait_for_vblank(dev_priv->dev, pipe);
|
|
}
|
|
|
|
/**
|
|
* intel_disable_plane - disable a display plane
|
|
* @dev_priv: i915 private structure
|
|
* @plane: plane to disable
|
|
* @pipe: pipe consuming the data
|
|
*
|
|
* Disable @plane; should be an independent operation.
|
|
*/
|
|
static void intel_disable_plane(struct drm_i915_private *dev_priv,
|
|
enum plane plane, enum pipe pipe)
|
|
{
|
|
int reg;
|
|
u32 val;
|
|
|
|
reg = DSPCNTR(plane);
|
|
val = I915_READ(reg);
|
|
if ((val & DISPLAY_PLANE_ENABLE) == 0)
|
|
return;
|
|
|
|
I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
|
|
intel_flush_display_plane(dev_priv, plane);
|
|
intel_wait_for_vblank(dev_priv->dev, pipe);
|
|
}
|
|
|
|
static void disable_pch_dp(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, int reg, u32 port_sel)
|
|
{
|
|
u32 val = I915_READ(reg);
|
|
if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
|
|
DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
|
|
I915_WRITE(reg, val & ~DP_PORT_EN);
|
|
}
|
|
}
|
|
|
|
static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, int reg)
|
|
{
|
|
u32 val = I915_READ(reg);
|
|
if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
|
|
DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
|
|
reg, pipe);
|
|
I915_WRITE(reg, val & ~PORT_ENABLE);
|
|
}
|
|
}
|
|
|
|
/* Disable any ports connected to this transcoder */
|
|
static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
u32 reg, val;
|
|
|
|
val = I915_READ(PCH_PP_CONTROL);
|
|
I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
|
|
|
|
disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
|
|
disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
|
|
disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
|
|
|
|
reg = PCH_ADPA;
|
|
val = I915_READ(reg);
|
|
if (adpa_pipe_enabled(dev_priv, val, pipe))
|
|
I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
|
|
|
|
reg = PCH_LVDS;
|
|
val = I915_READ(reg);
|
|
if (lvds_pipe_enabled(dev_priv, val, pipe)) {
|
|
DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
|
|
I915_WRITE(reg, val & ~LVDS_PORT_EN);
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
}
|
|
|
|
disable_pch_hdmi(dev_priv, pipe, HDMIB);
|
|
disable_pch_hdmi(dev_priv, pipe, HDMIC);
|
|
disable_pch_hdmi(dev_priv, pipe, HDMID);
|
|
}
|
|
|
|
static void i8xx_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 fbc_ctl;
|
|
|
|
/* Disable compression */
|
|
fbc_ctl = I915_READ(FBC_CONTROL);
|
|
if ((fbc_ctl & FBC_CTL_EN) == 0)
|
|
return;
|
|
|
|
fbc_ctl &= ~FBC_CTL_EN;
|
|
I915_WRITE(FBC_CONTROL, fbc_ctl);
|
|
|
|
/* Wait for compressing bit to clear */
|
|
if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) {
|
|
DRM_DEBUG_KMS("FBC idle timed out\n");
|
|
return;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("disabled FBC\n");
|
|
}
|
|
|
|
static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int cfb_pitch;
|
|
int plane, i;
|
|
u32 fbc_ctl, fbc_ctl2;
|
|
|
|
cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
|
|
if (fb->pitches[0] < cfb_pitch)
|
|
cfb_pitch = fb->pitches[0];
|
|
|
|
/* FBC_CTL wants 64B units */
|
|
cfb_pitch = (cfb_pitch / 64) - 1;
|
|
plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
|
|
|
|
/* Clear old tags */
|
|
for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
|
|
I915_WRITE(FBC_TAG + (i * 4), 0);
|
|
|
|
/* Set it up... */
|
|
fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE;
|
|
fbc_ctl2 |= plane;
|
|
I915_WRITE(FBC_CONTROL2, fbc_ctl2);
|
|
I915_WRITE(FBC_FENCE_OFF, crtc->y);
|
|
|
|
/* enable it... */
|
|
fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
|
|
if (IS_I945GM(dev))
|
|
fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
|
|
fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
|
|
fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
|
|
fbc_ctl |= obj->fence_reg;
|
|
I915_WRITE(FBC_CONTROL, fbc_ctl);
|
|
|
|
DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
|
|
cfb_pitch, crtc->y, intel_crtc->plane);
|
|
}
|
|
|
|
static bool i8xx_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
|
|
}
|
|
|
|
static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
|
|
unsigned long stall_watermark = 200;
|
|
u32 dpfc_ctl;
|
|
|
|
dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
|
|
dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
|
|
I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
|
|
|
|
I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
|
|
(stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
|
|
(interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
|
|
I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
|
|
|
|
/* enable it... */
|
|
I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
|
|
|
|
DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
|
|
}
|
|
|
|
static void g4x_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpfc_ctl;
|
|
|
|
/* Disable compression */
|
|
dpfc_ctl = I915_READ(DPFC_CONTROL);
|
|
if (dpfc_ctl & DPFC_CTL_EN) {
|
|
dpfc_ctl &= ~DPFC_CTL_EN;
|
|
I915_WRITE(DPFC_CONTROL, dpfc_ctl);
|
|
|
|
DRM_DEBUG_KMS("disabled FBC\n");
|
|
}
|
|
}
|
|
|
|
static bool g4x_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
|
|
}
|
|
|
|
static void sandybridge_blit_fbc_update(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 blt_ecoskpd;
|
|
|
|
/* Make sure blitter notifies FBC of writes */
|
|
gen6_gt_force_wake_get(dev_priv);
|
|
blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
|
|
blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
|
|
GEN6_BLITTER_LOCK_SHIFT;
|
|
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
|
|
blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
|
|
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
|
|
blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
|
|
GEN6_BLITTER_LOCK_SHIFT);
|
|
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
|
|
POSTING_READ(GEN6_BLITTER_ECOSKPD);
|
|
gen6_gt_force_wake_put(dev_priv);
|
|
}
|
|
|
|
static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
|
|
unsigned long stall_watermark = 200;
|
|
u32 dpfc_ctl;
|
|
|
|
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
|
|
dpfc_ctl &= DPFC_RESERVED;
|
|
dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
|
|
/* Set persistent mode for front-buffer rendering, ala X. */
|
|
dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
|
|
dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
|
|
I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
|
|
|
|
I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
|
|
(stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
|
|
(interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
|
|
I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
|
|
I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
|
|
/* enable it... */
|
|
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN);
|
|
|
|
if (IS_GEN6(dev)) {
|
|
I915_WRITE(SNB_DPFC_CTL_SA,
|
|
SNB_CPU_FENCE_ENABLE | obj->fence_reg);
|
|
I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
|
|
sandybridge_blit_fbc_update(dev);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
|
|
}
|
|
|
|
static void ironlake_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpfc_ctl;
|
|
|
|
/* Disable compression */
|
|
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
|
|
if (dpfc_ctl & DPFC_CTL_EN) {
|
|
dpfc_ctl &= ~DPFC_CTL_EN;
|
|
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
|
|
|
|
DRM_DEBUG_KMS("disabled FBC\n");
|
|
}
|
|
}
|
|
|
|
static bool ironlake_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
|
|
}
|
|
|
|
bool intel_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!dev_priv->display.fbc_enabled)
|
|
return false;
|
|
|
|
return dev_priv->display.fbc_enabled(dev);
|
|
}
|
|
|
|
static void intel_fbc_work_fn(struct work_struct *__work)
|
|
{
|
|
struct intel_fbc_work *work =
|
|
container_of(to_delayed_work(__work),
|
|
struct intel_fbc_work, work);
|
|
struct drm_device *dev = work->crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
if (work == dev_priv->fbc_work) {
|
|
/* Double check that we haven't switched fb without cancelling
|
|
* the prior work.
|
|
*/
|
|
if (work->crtc->fb == work->fb) {
|
|
dev_priv->display.enable_fbc(work->crtc,
|
|
work->interval);
|
|
|
|
dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane;
|
|
dev_priv->cfb_fb = work->crtc->fb->base.id;
|
|
dev_priv->cfb_y = work->crtc->y;
|
|
}
|
|
|
|
dev_priv->fbc_work = NULL;
|
|
}
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
kfree(work);
|
|
}
|
|
|
|
static void intel_cancel_fbc_work(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (dev_priv->fbc_work == NULL)
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("cancelling pending FBC enable\n");
|
|
|
|
/* Synchronisation is provided by struct_mutex and checking of
|
|
* dev_priv->fbc_work, so we can perform the cancellation
|
|
* entirely asynchronously.
|
|
*/
|
|
if (cancel_delayed_work(&dev_priv->fbc_work->work))
|
|
/* tasklet was killed before being run, clean up */
|
|
kfree(dev_priv->fbc_work);
|
|
|
|
/* Mark the work as no longer wanted so that if it does
|
|
* wake-up (because the work was already running and waiting
|
|
* for our mutex), it will discover that is no longer
|
|
* necessary to run.
|
|
*/
|
|
dev_priv->fbc_work = NULL;
|
|
}
|
|
|
|
static void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct intel_fbc_work *work;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!dev_priv->display.enable_fbc)
|
|
return;
|
|
|
|
intel_cancel_fbc_work(dev_priv);
|
|
|
|
work = kzalloc(sizeof *work, GFP_KERNEL);
|
|
if (work == NULL) {
|
|
dev_priv->display.enable_fbc(crtc, interval);
|
|
return;
|
|
}
|
|
|
|
work->crtc = crtc;
|
|
work->fb = crtc->fb;
|
|
work->interval = interval;
|
|
INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn);
|
|
|
|
dev_priv->fbc_work = work;
|
|
|
|
DRM_DEBUG_KMS("scheduling delayed FBC enable\n");
|
|
|
|
/* Delay the actual enabling to let pageflipping cease and the
|
|
* display to settle before starting the compression. Note that
|
|
* this delay also serves a second purpose: it allows for a
|
|
* vblank to pass after disabling the FBC before we attempt
|
|
* to modify the control registers.
|
|
*
|
|
* A more complicated solution would involve tracking vblanks
|
|
* following the termination of the page-flipping sequence
|
|
* and indeed performing the enable as a co-routine and not
|
|
* waiting synchronously upon the vblank.
|
|
*/
|
|
schedule_delayed_work(&work->work, msecs_to_jiffies(50));
|
|
}
|
|
|
|
void intel_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
intel_cancel_fbc_work(dev_priv);
|
|
|
|
if (!dev_priv->display.disable_fbc)
|
|
return;
|
|
|
|
dev_priv->display.disable_fbc(dev);
|
|
dev_priv->cfb_plane = -1;
|
|
}
|
|
|
|
/**
|
|
* intel_update_fbc - enable/disable FBC as needed
|
|
* @dev: the drm_device
|
|
*
|
|
* Set up the framebuffer compression hardware at mode set time. We
|
|
* enable it if possible:
|
|
* - plane A only (on pre-965)
|
|
* - no pixel mulitply/line duplication
|
|
* - no alpha buffer discard
|
|
* - no dual wide
|
|
* - framebuffer <= 2048 in width, 1536 in height
|
|
*
|
|
* We can't assume that any compression will take place (worst case),
|
|
* so the compressed buffer has to be the same size as the uncompressed
|
|
* one. It also must reside (along with the line length buffer) in
|
|
* stolen memory.
|
|
*
|
|
* We need to enable/disable FBC on a global basis.
|
|
*/
|
|
static void intel_update_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = NULL, *tmp_crtc;
|
|
struct intel_crtc *intel_crtc;
|
|
struct drm_framebuffer *fb;
|
|
struct intel_framebuffer *intel_fb;
|
|
struct drm_i915_gem_object *obj;
|
|
int enable_fbc;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (!i915_powersave)
|
|
return;
|
|
|
|
if (!I915_HAS_FBC(dev))
|
|
return;
|
|
|
|
/*
|
|
* If FBC is already on, we just have to verify that we can
|
|
* keep it that way...
|
|
* Need to disable if:
|
|
* - more than one pipe is active
|
|
* - changing FBC params (stride, fence, mode)
|
|
* - new fb is too large to fit in compressed buffer
|
|
* - going to an unsupported config (interlace, pixel multiply, etc.)
|
|
*/
|
|
list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
|
|
if (tmp_crtc->enabled && tmp_crtc->fb) {
|
|
if (crtc) {
|
|
DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
|
|
goto out_disable;
|
|
}
|
|
crtc = tmp_crtc;
|
|
}
|
|
}
|
|
|
|
if (!crtc || crtc->fb == NULL) {
|
|
DRM_DEBUG_KMS("no output, disabling\n");
|
|
dev_priv->no_fbc_reason = FBC_NO_OUTPUT;
|
|
goto out_disable;
|
|
}
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
fb = crtc->fb;
|
|
intel_fb = to_intel_framebuffer(fb);
|
|
obj = intel_fb->obj;
|
|
|
|
enable_fbc = i915_enable_fbc;
|
|
if (enable_fbc < 0) {
|
|
DRM_DEBUG_KMS("fbc set to per-chip default\n");
|
|
enable_fbc = 1;
|
|
if (INTEL_INFO(dev)->gen <= 6)
|
|
enable_fbc = 0;
|
|
}
|
|
if (!enable_fbc) {
|
|
DRM_DEBUG_KMS("fbc disabled per module param\n");
|
|
dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
|
|
goto out_disable;
|
|
}
|
|
if (intel_fb->obj->base.size > dev_priv->cfb_size) {
|
|
DRM_DEBUG_KMS("framebuffer too large, disabling "
|
|
"compression\n");
|
|
dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
|
|
goto out_disable;
|
|
}
|
|
if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
|
|
(crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
|
|
DRM_DEBUG_KMS("mode incompatible with compression, "
|
|
"disabling\n");
|
|
dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
|
|
goto out_disable;
|
|
}
|
|
if ((crtc->mode.hdisplay > 2048) ||
|
|
(crtc->mode.vdisplay > 1536)) {
|
|
DRM_DEBUG_KMS("mode too large for compression, disabling\n");
|
|
dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
|
|
goto out_disable;
|
|
}
|
|
if ((IS_I915GM(dev) || IS_I945GM(dev)) && intel_crtc->plane != 0) {
|
|
DRM_DEBUG_KMS("plane not 0, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_BAD_PLANE;
|
|
goto out_disable;
|
|
}
|
|
|
|
/* The use of a CPU fence is mandatory in order to detect writes
|
|
* by the CPU to the scanout and trigger updates to the FBC.
|
|
*/
|
|
if (obj->tiling_mode != I915_TILING_X ||
|
|
obj->fence_reg == I915_FENCE_REG_NONE) {
|
|
DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_NOT_TILED;
|
|
goto out_disable;
|
|
}
|
|
|
|
/* If the kernel debugger is active, always disable compression */
|
|
if (in_dbg_master())
|
|
goto out_disable;
|
|
|
|
/* If the scanout has not changed, don't modify the FBC settings.
|
|
* Note that we make the fundamental assumption that the fb->obj
|
|
* cannot be unpinned (and have its GTT offset and fence revoked)
|
|
* without first being decoupled from the scanout and FBC disabled.
|
|
*/
|
|
if (dev_priv->cfb_plane == intel_crtc->plane &&
|
|
dev_priv->cfb_fb == fb->base.id &&
|
|
dev_priv->cfb_y == crtc->y)
|
|
return;
|
|
|
|
if (intel_fbc_enabled(dev)) {
|
|
/* We update FBC along two paths, after changing fb/crtc
|
|
* configuration (modeswitching) and after page-flipping
|
|
* finishes. For the latter, we know that not only did
|
|
* we disable the FBC at the start of the page-flip
|
|
* sequence, but also more than one vblank has passed.
|
|
*
|
|
* For the former case of modeswitching, it is possible
|
|
* to switch between two FBC valid configurations
|
|
* instantaneously so we do need to disable the FBC
|
|
* before we can modify its control registers. We also
|
|
* have to wait for the next vblank for that to take
|
|
* effect. However, since we delay enabling FBC we can
|
|
* assume that a vblank has passed since disabling and
|
|
* that we can safely alter the registers in the deferred
|
|
* callback.
|
|
*
|
|
* In the scenario that we go from a valid to invalid
|
|
* and then back to valid FBC configuration we have
|
|
* no strict enforcement that a vblank occurred since
|
|
* disabling the FBC. However, along all current pipe
|
|
* disabling paths we do need to wait for a vblank at
|
|
* some point. And we wait before enabling FBC anyway.
|
|
*/
|
|
DRM_DEBUG_KMS("disabling active FBC for update\n");
|
|
intel_disable_fbc(dev);
|
|
}
|
|
|
|
intel_enable_fbc(crtc, 500);
|
|
return;
|
|
|
|
out_disable:
|
|
/* Multiple disables should be harmless */
|
|
if (intel_fbc_enabled(dev)) {
|
|
DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
|
|
intel_disable_fbc(dev);
|
|
}
|
|
}
|
|
|
|
int
|
|
intel_pin_and_fence_fb_obj(struct drm_device *dev,
|
|
struct drm_i915_gem_object *obj,
|
|
struct intel_ring_buffer *pipelined)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 alignment;
|
|
int ret;
|
|
|
|
switch (obj->tiling_mode) {
|
|
case I915_TILING_NONE:
|
|
if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
|
|
alignment = 128 * 1024;
|
|
else if (INTEL_INFO(dev)->gen >= 4)
|
|
alignment = 4 * 1024;
|
|
else
|
|
alignment = 64 * 1024;
|
|
break;
|
|
case I915_TILING_X:
|
|
/* pin() will align the object as required by fence */
|
|
alignment = 0;
|
|
break;
|
|
case I915_TILING_Y:
|
|
/* FIXME: Is this true? */
|
|
DRM_ERROR("Y tiled not allowed for scan out buffers\n");
|
|
return -EINVAL;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
dev_priv->mm.interruptible = false;
|
|
ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
|
|
if (ret)
|
|
goto err_interruptible;
|
|
|
|
/* Install a fence for tiled scan-out. Pre-i965 always needs a
|
|
* fence, whereas 965+ only requires a fence if using
|
|
* framebuffer compression. For simplicity, we always install
|
|
* a fence as the cost is not that onerous.
|
|
*/
|
|
if (obj->tiling_mode != I915_TILING_NONE) {
|
|
ret = i915_gem_object_get_fence(obj, pipelined);
|
|
if (ret)
|
|
goto err_unpin;
|
|
|
|
i915_gem_object_pin_fence(obj);
|
|
}
|
|
|
|
dev_priv->mm.interruptible = true;
|
|
return 0;
|
|
|
|
err_unpin:
|
|
i915_gem_object_unpin(obj);
|
|
err_interruptible:
|
|
dev_priv->mm.interruptible = true;
|
|
return ret;
|
|
}
|
|
|
|
void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
|
|
{
|
|
i915_gem_object_unpin_fence(obj);
|
|
i915_gem_object_unpin(obj);
|
|
}
|
|
|
|
static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
|
|
int x, int y)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_framebuffer *intel_fb;
|
|
struct drm_i915_gem_object *obj;
|
|
int plane = intel_crtc->plane;
|
|
unsigned long Start, Offset;
|
|
u32 dspcntr;
|
|
u32 reg;
|
|
|
|
switch (plane) {
|
|
case 0:
|
|
case 1:
|
|
break;
|
|
default:
|
|
DRM_ERROR("Can't update plane %d in SAREA\n", plane);
|
|
return -EINVAL;
|
|
}
|
|
|
|
intel_fb = to_intel_framebuffer(fb);
|
|
obj = intel_fb->obj;
|
|
|
|
reg = DSPCNTR(plane);
|
|
dspcntr = I915_READ(reg);
|
|
/* Mask out pixel format bits in case we change it */
|
|
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
|
|
switch (fb->bits_per_pixel) {
|
|
case 8:
|
|
dspcntr |= DISPPLANE_8BPP;
|
|
break;
|
|
case 16:
|
|
if (fb->depth == 15)
|
|
dspcntr |= DISPPLANE_15_16BPP;
|
|
else
|
|
dspcntr |= DISPPLANE_16BPP;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
|
|
break;
|
|
default:
|
|
DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
dspcntr |= DISPPLANE_TILED;
|
|
else
|
|
dspcntr &= ~DISPPLANE_TILED;
|
|
}
|
|
|
|
I915_WRITE(reg, dspcntr);
|
|
|
|
Start = obj->gtt_offset;
|
|
Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
|
|
|
|
DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
|
|
Start, Offset, x, y, fb->pitches[0]);
|
|
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
I915_WRITE(DSPSURF(plane), Start);
|
|
I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
|
|
I915_WRITE(DSPADDR(plane), Offset);
|
|
} else
|
|
I915_WRITE(DSPADDR(plane), Start + Offset);
|
|
POSTING_READ(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ironlake_update_plane(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb, int x, int y)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_framebuffer *intel_fb;
|
|
struct drm_i915_gem_object *obj;
|
|
int plane = intel_crtc->plane;
|
|
unsigned long Start, Offset;
|
|
u32 dspcntr;
|
|
u32 reg;
|
|
|
|
switch (plane) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
break;
|
|
default:
|
|
DRM_ERROR("Can't update plane %d in SAREA\n", plane);
|
|
return -EINVAL;
|
|
}
|
|
|
|
intel_fb = to_intel_framebuffer(fb);
|
|
obj = intel_fb->obj;
|
|
|
|
reg = DSPCNTR(plane);
|
|
dspcntr = I915_READ(reg);
|
|
/* Mask out pixel format bits in case we change it */
|
|
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
|
|
switch (fb->bits_per_pixel) {
|
|
case 8:
|
|
dspcntr |= DISPPLANE_8BPP;
|
|
break;
|
|
case 16:
|
|
if (fb->depth != 16)
|
|
return -EINVAL;
|
|
|
|
dspcntr |= DISPPLANE_16BPP;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
if (fb->depth == 24)
|
|
dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
|
|
else if (fb->depth == 30)
|
|
dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
dspcntr |= DISPPLANE_TILED;
|
|
else
|
|
dspcntr &= ~DISPPLANE_TILED;
|
|
|
|
/* must disable */
|
|
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
|
|
|
|
I915_WRITE(reg, dspcntr);
|
|
|
|
Start = obj->gtt_offset;
|
|
Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
|
|
|
|
DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
|
|
Start, Offset, x, y, fb->pitches[0]);
|
|
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
|
|
I915_WRITE(DSPSURF(plane), Start);
|
|
I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
|
|
I915_WRITE(DSPADDR(plane), Offset);
|
|
POSTING_READ(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Assume fb object is pinned & idle & fenced and just update base pointers */
|
|
static int
|
|
intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
|
|
int x, int y, enum mode_set_atomic state)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret;
|
|
|
|
ret = dev_priv->display.update_plane(crtc, fb, x, y);
|
|
if (ret)
|
|
return ret;
|
|
|
|
intel_update_fbc(dev);
|
|
intel_increase_pllclock(crtc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_master_private *master_priv;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int ret;
|
|
|
|
/* no fb bound */
|
|
if (!crtc->fb) {
|
|
DRM_ERROR("No FB bound\n");
|
|
return 0;
|
|
}
|
|
|
|
switch (intel_crtc->plane) {
|
|
case 0:
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
if (IS_IVYBRIDGE(dev))
|
|
break;
|
|
/* fall through otherwise */
|
|
default:
|
|
DRM_ERROR("no plane for crtc\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
ret = intel_pin_and_fence_fb_obj(dev,
|
|
to_intel_framebuffer(crtc->fb)->obj,
|
|
NULL);
|
|
if (ret != 0) {
|
|
mutex_unlock(&dev->struct_mutex);
|
|
DRM_ERROR("pin & fence failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (old_fb) {
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
|
|
|
|
wait_event(dev_priv->pending_flip_queue,
|
|
atomic_read(&dev_priv->mm.wedged) ||
|
|
atomic_read(&obj->pending_flip) == 0);
|
|
|
|
/* Big Hammer, we also need to ensure that any pending
|
|
* MI_WAIT_FOR_EVENT inside a user batch buffer on the
|
|
* current scanout is retired before unpinning the old
|
|
* framebuffer.
|
|
*
|
|
* This should only fail upon a hung GPU, in which case we
|
|
* can safely continue.
|
|
*/
|
|
ret = i915_gem_object_finish_gpu(obj);
|
|
(void) ret;
|
|
}
|
|
|
|
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
|
|
LEAVE_ATOMIC_MODE_SET);
|
|
if (ret) {
|
|
intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
DRM_ERROR("failed to update base address\n");
|
|
return ret;
|
|
}
|
|
|
|
if (old_fb) {
|
|
intel_wait_for_vblank(dev, intel_crtc->pipe);
|
|
intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
|
|
}
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
if (!dev->primary->master)
|
|
return 0;
|
|
|
|
master_priv = dev->primary->master->driver_priv;
|
|
if (!master_priv->sarea_priv)
|
|
return 0;
|
|
|
|
if (intel_crtc->pipe) {
|
|
master_priv->sarea_priv->pipeB_x = x;
|
|
master_priv->sarea_priv->pipeB_y = y;
|
|
} else {
|
|
master_priv->sarea_priv->pipeA_x = x;
|
|
master_priv->sarea_priv->pipeA_y = y;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpa_ctl;
|
|
|
|
DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
|
|
dpa_ctl = I915_READ(DP_A);
|
|
dpa_ctl &= ~DP_PLL_FREQ_MASK;
|
|
|
|
if (clock < 200000) {
|
|
u32 temp;
|
|
dpa_ctl |= DP_PLL_FREQ_160MHZ;
|
|
/* workaround for 160Mhz:
|
|
1) program 0x4600c bits 15:0 = 0x8124
|
|
2) program 0x46010 bit 0 = 1
|
|
3) program 0x46034 bit 24 = 1
|
|
4) program 0x64000 bit 14 = 1
|
|
*/
|
|
temp = I915_READ(0x4600c);
|
|
temp &= 0xffff0000;
|
|
I915_WRITE(0x4600c, temp | 0x8124);
|
|
|
|
temp = I915_READ(0x46010);
|
|
I915_WRITE(0x46010, temp | 1);
|
|
|
|
temp = I915_READ(0x46034);
|
|
I915_WRITE(0x46034, temp | (1 << 24));
|
|
} else {
|
|
dpa_ctl |= DP_PLL_FREQ_270MHZ;
|
|
}
|
|
I915_WRITE(DP_A, dpa_ctl);
|
|
|
|
POSTING_READ(DP_A);
|
|
udelay(500);
|
|
}
|
|
|
|
static void intel_fdi_normal_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 reg, temp;
|
|
|
|
/* enable normal train */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (IS_IVYBRIDGE(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_NONE_IVB;
|
|
temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
|
|
}
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_NONE;
|
|
}
|
|
I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
|
|
|
|
/* wait one idle pattern time */
|
|
POSTING_READ(reg);
|
|
udelay(1000);
|
|
|
|
/* IVB wants error correction enabled */
|
|
if (IS_IVYBRIDGE(dev))
|
|
I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
|
|
FDI_FE_ERRC_ENABLE);
|
|
}
|
|
|
|
static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 flags = I915_READ(SOUTH_CHICKEN1);
|
|
|
|
flags |= FDI_PHASE_SYNC_OVR(pipe);
|
|
I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
|
|
flags |= FDI_PHASE_SYNC_EN(pipe);
|
|
I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
|
|
POSTING_READ(SOUTH_CHICKEN1);
|
|
}
|
|
|
|
/* The FDI link training functions for ILK/Ibexpeak. */
|
|
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
u32 reg, temp, tries;
|
|
|
|
/* FDI needs bits from pipe & plane first */
|
|
assert_pipe_enabled(dev_priv, pipe);
|
|
assert_plane_enabled(dev_priv, plane);
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
I915_WRITE(reg, temp);
|
|
I915_READ(reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(7 << 19);
|
|
temp |= (intel_crtc->fdi_lanes - 1) << 19;
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
I915_WRITE(reg, temp | FDI_TX_ENABLE);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
I915_WRITE(reg, temp | FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
/* Ironlake workaround, enable clock pointer after FDI enable*/
|
|
if (HAS_PCH_IBX(dev)) {
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
|
|
FDI_RX_PHASE_SYNC_POINTER_EN);
|
|
}
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
for (tries = 0; tries < 5; tries++) {
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if ((temp & FDI_RX_BIT_LOCK)) {
|
|
DRM_DEBUG_KMS("FDI train 1 done.\n");
|
|
I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
|
|
break;
|
|
}
|
|
}
|
|
if (tries == 5)
|
|
DRM_ERROR("FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
for (tries = 0; tries < 5; tries++) {
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (tries == 5)
|
|
DRM_ERROR("FDI train 2 fail!\n");
|
|
|
|
DRM_DEBUG_KMS("FDI train done\n");
|
|
|
|
}
|
|
|
|
static const int snb_b_fdi_train_param[] = {
|
|
FDI_LINK_TRAIN_400MV_0DB_SNB_B,
|
|
FDI_LINK_TRAIN_400MV_6DB_SNB_B,
|
|
FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
|
|
FDI_LINK_TRAIN_800MV_0DB_SNB_B,
|
|
};
|
|
|
|
/* The FDI link training functions for SNB/Cougarpoint. */
|
|
static void gen6_fdi_link_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 reg, temp, i;
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(7 << 19);
|
|
temp |= (intel_crtc->fdi_lanes - 1) << 19;
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
/* SNB-B */
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
I915_WRITE(reg, temp | FDI_TX_ENABLE);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
}
|
|
I915_WRITE(reg, temp | FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
if (HAS_PCH_CPT(dev))
|
|
cpt_phase_pointer_enable(dev, pipe);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[i];
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(500);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_BIT_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 1 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (i == 4)
|
|
DRM_ERROR("FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
if (IS_GEN6(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
/* SNB-B */
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
}
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
}
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[i];
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(500);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (i == 4)
|
|
DRM_ERROR("FDI train 2 fail!\n");
|
|
|
|
DRM_DEBUG_KMS("FDI train done.\n");
|
|
}
|
|
|
|
/* Manual link training for Ivy Bridge A0 parts */
|
|
static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 reg, temp, i;
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(7 << 19);
|
|
temp |= (intel_crtc->fdi_lanes - 1) << 19;
|
|
temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
temp |= FDI_COMPOSITE_SYNC;
|
|
I915_WRITE(reg, temp | FDI_TX_ENABLE);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_AUTO;
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
temp |= FDI_COMPOSITE_SYNC;
|
|
I915_WRITE(reg, temp | FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
if (HAS_PCH_CPT(dev))
|
|
cpt_phase_pointer_enable(dev, pipe);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[i];
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(500);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_BIT_LOCK ||
|
|
(I915_READ(reg) & FDI_RX_BIT_LOCK)) {
|
|
I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 1 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (i == 4)
|
|
DRM_ERROR("FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE_IVB;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[i];
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(500);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (i == 4)
|
|
DRM_ERROR("FDI train 2 fail!\n");
|
|
|
|
DRM_DEBUG_KMS("FDI train done.\n");
|
|
}
|
|
|
|
static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 reg, temp;
|
|
|
|
/* Write the TU size bits so error detection works */
|
|
I915_WRITE(FDI_RX_TUSIZE1(pipe),
|
|
I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
|
|
|
|
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~((0x7 << 19) | (0x7 << 16));
|
|
temp |= (intel_crtc->fdi_lanes - 1) << 19;
|
|
temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
|
|
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(200);
|
|
|
|
/* Switch from Rawclk to PCDclk */
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp | FDI_PCDCLK);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(200);
|
|
|
|
/* Enable CPU FDI TX PLL, always on for Ironlake */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
|
|
I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 flags = I915_READ(SOUTH_CHICKEN1);
|
|
|
|
flags &= ~(FDI_PHASE_SYNC_EN(pipe));
|
|
I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
|
|
flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
|
|
I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
|
|
POSTING_READ(SOUTH_CHICKEN1);
|
|
}
|
|
static void ironlake_fdi_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 reg, temp;
|
|
|
|
/* disable CPU FDI tx and PCH FDI rx */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
|
|
POSTING_READ(reg);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(0x7 << 16);
|
|
temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
|
|
I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
|
|
/* Ironlake workaround, disable clock pointer after downing FDI */
|
|
if (HAS_PCH_IBX(dev)) {
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe),
|
|
I915_READ(FDI_RX_CHICKEN(pipe) &
|
|
~FDI_RX_PHASE_SYNC_POINTER_EN));
|
|
} else if (HAS_PCH_CPT(dev)) {
|
|
cpt_phase_pointer_disable(dev, pipe);
|
|
}
|
|
|
|
/* still set train pattern 1 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
}
|
|
/* BPC in FDI rx is consistent with that in PIPECONF */
|
|
temp &= ~(0x07 << 16);
|
|
temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
}
|
|
|
|
/*
|
|
* When we disable a pipe, we need to clear any pending scanline wait events
|
|
* to avoid hanging the ring, which we assume we are waiting on.
|
|
*/
|
|
static void intel_clear_scanline_wait(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring;
|
|
u32 tmp;
|
|
|
|
if (IS_GEN2(dev))
|
|
/* Can't break the hang on i8xx */
|
|
return;
|
|
|
|
ring = LP_RING(dev_priv);
|
|
tmp = I915_READ_CTL(ring);
|
|
if (tmp & RING_WAIT)
|
|
I915_WRITE_CTL(ring, tmp);
|
|
}
|
|
|
|
static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_i915_private *dev_priv;
|
|
|
|
if (crtc->fb == NULL)
|
|
return;
|
|
|
|
obj = to_intel_framebuffer(crtc->fb)->obj;
|
|
dev_priv = crtc->dev->dev_private;
|
|
wait_event(dev_priv->pending_flip_queue,
|
|
atomic_read(&obj->pending_flip) == 0);
|
|
}
|
|
|
|
static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *encoder;
|
|
|
|
/*
|
|
* If there's a non-PCH eDP on this crtc, it must be DP_A, and that
|
|
* must be driven by its own crtc; no sharing is possible.
|
|
*/
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
|
|
if (encoder->base.crtc != crtc)
|
|
continue;
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_EDP:
|
|
if (!intel_encoder_is_pch_edp(&encoder->base))
|
|
return false;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Enable PCH resources required for PCH ports:
|
|
* - PCH PLLs
|
|
* - FDI training & RX/TX
|
|
* - update transcoder timings
|
|
* - DP transcoding bits
|
|
* - transcoder
|
|
*/
|
|
static void ironlake_pch_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 reg, temp, transc_sel;
|
|
|
|
/* For PCH output, training FDI link */
|
|
dev_priv->display.fdi_link_train(crtc);
|
|
|
|
intel_enable_pch_pll(dev_priv, pipe);
|
|
|
|
if (HAS_PCH_CPT(dev)) {
|
|
transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
|
|
TRANSC_DPLLB_SEL;
|
|
|
|
/* Be sure PCH DPLL SEL is set */
|
|
temp = I915_READ(PCH_DPLL_SEL);
|
|
if (pipe == 0) {
|
|
temp &= ~(TRANSA_DPLLB_SEL);
|
|
temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
|
|
} else if (pipe == 1) {
|
|
temp &= ~(TRANSB_DPLLB_SEL);
|
|
temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
|
|
} else if (pipe == 2) {
|
|
temp &= ~(TRANSC_DPLLB_SEL);
|
|
temp |= (TRANSC_DPLL_ENABLE | transc_sel);
|
|
}
|
|
I915_WRITE(PCH_DPLL_SEL, temp);
|
|
}
|
|
|
|
/* set transcoder timing, panel must allow it */
|
|
assert_panel_unlocked(dev_priv, pipe);
|
|
I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
|
|
I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
|
|
I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
|
|
|
|
I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
|
|
I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
|
|
I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
|
|
I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
|
|
|
|
intel_fdi_normal_train(crtc);
|
|
|
|
/* For PCH DP, enable TRANS_DP_CTL */
|
|
if (HAS_PCH_CPT(dev) &&
|
|
(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
|
|
u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
|
|
reg = TRANS_DP_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(TRANS_DP_PORT_SEL_MASK |
|
|
TRANS_DP_SYNC_MASK |
|
|
TRANS_DP_BPC_MASK);
|
|
temp |= (TRANS_DP_OUTPUT_ENABLE |
|
|
TRANS_DP_ENH_FRAMING);
|
|
temp |= bpc << 9; /* same format but at 11:9 */
|
|
|
|
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
|
|
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
|
|
if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
|
|
temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
|
|
|
|
switch (intel_trans_dp_port_sel(crtc)) {
|
|
case PCH_DP_B:
|
|
temp |= TRANS_DP_PORT_SEL_B;
|
|
break;
|
|
case PCH_DP_C:
|
|
temp |= TRANS_DP_PORT_SEL_C;
|
|
break;
|
|
case PCH_DP_D:
|
|
temp |= TRANS_DP_PORT_SEL_D;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
|
|
temp |= TRANS_DP_PORT_SEL_B;
|
|
break;
|
|
}
|
|
|
|
I915_WRITE(reg, temp);
|
|
}
|
|
|
|
intel_enable_transcoder(dev_priv, pipe);
|
|
}
|
|
|
|
void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
|
|
u32 temp;
|
|
|
|
temp = I915_READ(dslreg);
|
|
udelay(500);
|
|
if (wait_for(I915_READ(dslreg) != temp, 5)) {
|
|
/* Without this, mode sets may fail silently on FDI */
|
|
I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
|
|
udelay(250);
|
|
I915_WRITE(tc2reg, 0);
|
|
if (wait_for(I915_READ(dslreg) != temp, 5))
|
|
DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
|
|
}
|
|
}
|
|
|
|
static void ironlake_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
u32 temp;
|
|
bool is_pch_port;
|
|
|
|
if (intel_crtc->active)
|
|
return;
|
|
|
|
intel_crtc->active = true;
|
|
intel_update_watermarks(dev);
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
|
temp = I915_READ(PCH_LVDS);
|
|
if ((temp & LVDS_PORT_EN) == 0)
|
|
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
|
|
}
|
|
|
|
is_pch_port = intel_crtc_driving_pch(crtc);
|
|
|
|
if (is_pch_port)
|
|
ironlake_fdi_pll_enable(crtc);
|
|
else
|
|
ironlake_fdi_disable(crtc);
|
|
|
|
/* Enable panel fitting for LVDS */
|
|
if (dev_priv->pch_pf_size &&
|
|
(intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
|
|
/* Force use of hard-coded filter coefficients
|
|
* as some pre-programmed values are broken,
|
|
* e.g. x201.
|
|
*/
|
|
I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
|
|
I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
|
|
I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
|
|
}
|
|
|
|
/*
|
|
* On ILK+ LUT must be loaded before the pipe is running but with
|
|
* clocks enabled
|
|
*/
|
|
intel_crtc_load_lut(crtc);
|
|
|
|
intel_enable_pipe(dev_priv, pipe, is_pch_port);
|
|
intel_enable_plane(dev_priv, plane, pipe);
|
|
|
|
if (is_pch_port)
|
|
ironlake_pch_enable(crtc);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_update_fbc(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_crtc_update_cursor(crtc, true);
|
|
}
|
|
|
|
static void ironlake_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
u32 reg, temp;
|
|
|
|
if (!intel_crtc->active)
|
|
return;
|
|
|
|
intel_crtc_wait_for_pending_flips(crtc);
|
|
drm_vblank_off(dev, pipe);
|
|
intel_crtc_update_cursor(crtc, false);
|
|
|
|
intel_disable_plane(dev_priv, plane, pipe);
|
|
|
|
if (dev_priv->cfb_plane == plane)
|
|
intel_disable_fbc(dev);
|
|
|
|
intel_disable_pipe(dev_priv, pipe);
|
|
|
|
/* Disable PF */
|
|
I915_WRITE(PF_CTL(pipe), 0);
|
|
I915_WRITE(PF_WIN_SZ(pipe), 0);
|
|
|
|
ironlake_fdi_disable(crtc);
|
|
|
|
/* This is a horrible layering violation; we should be doing this in
|
|
* the connector/encoder ->prepare instead, but we don't always have
|
|
* enough information there about the config to know whether it will
|
|
* actually be necessary or just cause undesired flicker.
|
|
*/
|
|
intel_disable_pch_ports(dev_priv, pipe);
|
|
|
|
intel_disable_transcoder(dev_priv, pipe);
|
|
|
|
if (HAS_PCH_CPT(dev)) {
|
|
/* disable TRANS_DP_CTL */
|
|
reg = TRANS_DP_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
|
|
temp |= TRANS_DP_PORT_SEL_NONE;
|
|
I915_WRITE(reg, temp);
|
|
|
|
/* disable DPLL_SEL */
|
|
temp = I915_READ(PCH_DPLL_SEL);
|
|
switch (pipe) {
|
|
case 0:
|
|
temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
|
|
break;
|
|
case 1:
|
|
temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
|
|
break;
|
|
case 2:
|
|
/* C shares PLL A or B */
|
|
temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
|
|
break;
|
|
default:
|
|
BUG(); /* wtf */
|
|
}
|
|
I915_WRITE(PCH_DPLL_SEL, temp);
|
|
}
|
|
|
|
/* disable PCH DPLL */
|
|
if (!intel_crtc->no_pll)
|
|
intel_disable_pch_pll(dev_priv, pipe);
|
|
|
|
/* Switch from PCDclk to Rawclk */
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_PCDCLK);
|
|
|
|
/* Disable CPU FDI TX PLL */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
|
|
|
|
/* Wait for the clocks to turn off. */
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
|
|
intel_crtc->active = false;
|
|
intel_update_watermarks(dev);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_update_fbc(dev);
|
|
intel_clear_scanline_wait(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
|
|
/* XXX: When our outputs are all unaware of DPMS modes other than off
|
|
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
|
|
*/
|
|
switch (mode) {
|
|
case DRM_MODE_DPMS_ON:
|
|
case DRM_MODE_DPMS_STANDBY:
|
|
case DRM_MODE_DPMS_SUSPEND:
|
|
DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
|
|
ironlake_crtc_enable(crtc);
|
|
break;
|
|
|
|
case DRM_MODE_DPMS_OFF:
|
|
DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
|
|
ironlake_crtc_disable(crtc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
|
|
{
|
|
if (!enable && intel_crtc->overlay) {
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
dev_priv->mm.interruptible = false;
|
|
(void) intel_overlay_switch_off(intel_crtc->overlay);
|
|
dev_priv->mm.interruptible = true;
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
/* Let userspace switch the overlay on again. In most cases userspace
|
|
* has to recompute where to put it anyway.
|
|
*/
|
|
}
|
|
|
|
static void i9xx_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
|
|
if (intel_crtc->active)
|
|
return;
|
|
|
|
intel_crtc->active = true;
|
|
intel_update_watermarks(dev);
|
|
|
|
intel_enable_pll(dev_priv, pipe);
|
|
intel_enable_pipe(dev_priv, pipe, false);
|
|
intel_enable_plane(dev_priv, plane, pipe);
|
|
|
|
intel_crtc_load_lut(crtc);
|
|
intel_update_fbc(dev);
|
|
|
|
/* Give the overlay scaler a chance to enable if it's on this pipe */
|
|
intel_crtc_dpms_overlay(intel_crtc, true);
|
|
intel_crtc_update_cursor(crtc, true);
|
|
}
|
|
|
|
static void i9xx_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
|
|
if (!intel_crtc->active)
|
|
return;
|
|
|
|
/* Give the overlay scaler a chance to disable if it's on this pipe */
|
|
intel_crtc_wait_for_pending_flips(crtc);
|
|
drm_vblank_off(dev, pipe);
|
|
intel_crtc_dpms_overlay(intel_crtc, false);
|
|
intel_crtc_update_cursor(crtc, false);
|
|
|
|
if (dev_priv->cfb_plane == plane)
|
|
intel_disable_fbc(dev);
|
|
|
|
intel_disable_plane(dev_priv, plane, pipe);
|
|
intel_disable_pipe(dev_priv, pipe);
|
|
intel_disable_pll(dev_priv, pipe);
|
|
|
|
intel_crtc->active = false;
|
|
intel_update_fbc(dev);
|
|
intel_update_watermarks(dev);
|
|
intel_clear_scanline_wait(dev);
|
|
}
|
|
|
|
static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
|
|
{
|
|
/* XXX: When our outputs are all unaware of DPMS modes other than off
|
|
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
|
|
*/
|
|
switch (mode) {
|
|
case DRM_MODE_DPMS_ON:
|
|
case DRM_MODE_DPMS_STANDBY:
|
|
case DRM_MODE_DPMS_SUSPEND:
|
|
i9xx_crtc_enable(crtc);
|
|
break;
|
|
case DRM_MODE_DPMS_OFF:
|
|
i9xx_crtc_disable(crtc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Sets the power management mode of the pipe and plane.
|
|
*/
|
|
static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_master_private *master_priv;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
bool enabled;
|
|
|
|
if (intel_crtc->dpms_mode == mode)
|
|
return;
|
|
|
|
intel_crtc->dpms_mode = mode;
|
|
|
|
dev_priv->display.dpms(crtc, mode);
|
|
|
|
if (!dev->primary->master)
|
|
return;
|
|
|
|
master_priv = dev->primary->master->driver_priv;
|
|
if (!master_priv->sarea_priv)
|
|
return;
|
|
|
|
enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
|
|
|
|
switch (pipe) {
|
|
case 0:
|
|
master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
|
|
master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
|
|
break;
|
|
case 1:
|
|
master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
|
|
master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
|
|
break;
|
|
default:
|
|
DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void intel_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
|
|
assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
|
|
assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
|
|
|
|
if (crtc->fb) {
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
}
|
|
|
|
/* Prepare for a mode set.
|
|
*
|
|
* Note we could be a lot smarter here. We need to figure out which outputs
|
|
* will be enabled, which disabled (in short, how the config will changes)
|
|
* and perform the minimum necessary steps to accomplish that, e.g. updating
|
|
* watermarks, FBC configuration, making sure PLLs are programmed correctly,
|
|
* panel fitting is in the proper state, etc.
|
|
*/
|
|
static void i9xx_crtc_prepare(struct drm_crtc *crtc)
|
|
{
|
|
i9xx_crtc_disable(crtc);
|
|
}
|
|
|
|
static void i9xx_crtc_commit(struct drm_crtc *crtc)
|
|
{
|
|
i9xx_crtc_enable(crtc);
|
|
}
|
|
|
|
static void ironlake_crtc_prepare(struct drm_crtc *crtc)
|
|
{
|
|
ironlake_crtc_disable(crtc);
|
|
}
|
|
|
|
static void ironlake_crtc_commit(struct drm_crtc *crtc)
|
|
{
|
|
ironlake_crtc_enable(crtc);
|
|
}
|
|
|
|
void intel_encoder_prepare(struct drm_encoder *encoder)
|
|
{
|
|
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
|
|
/* lvds has its own version of prepare see intel_lvds_prepare */
|
|
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
|
|
}
|
|
|
|
void intel_encoder_commit(struct drm_encoder *encoder)
|
|
{
|
|
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
|
|
|
|
/* lvds has its own version of commit see intel_lvds_commit */
|
|
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
|
|
|
|
if (HAS_PCH_CPT(dev))
|
|
intel_cpt_verify_modeset(dev, intel_crtc->pipe);
|
|
}
|
|
|
|
void intel_encoder_destroy(struct drm_encoder *encoder)
|
|
{
|
|
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
|
|
|
|
drm_encoder_cleanup(encoder);
|
|
kfree(intel_encoder);
|
|
}
|
|
|
|
static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
/* FDI link clock is fixed at 2.7G */
|
|
if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
|
|
return false;
|
|
}
|
|
|
|
/* All interlaced capable intel hw wants timings in frames. */
|
|
drm_mode_set_crtcinfo(adjusted_mode, 0);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int i945_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 400000;
|
|
}
|
|
|
|
static int i915_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 333000;
|
|
}
|
|
|
|
static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 200000;
|
|
}
|
|
|
|
static int i915gm_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
u16 gcfgc = 0;
|
|
|
|
pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
|
|
|
|
if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
|
|
return 133000;
|
|
else {
|
|
switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
|
|
case GC_DISPLAY_CLOCK_333_MHZ:
|
|
return 333000;
|
|
default:
|
|
case GC_DISPLAY_CLOCK_190_200_MHZ:
|
|
return 190000;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int i865_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 266000;
|
|
}
|
|
|
|
static int i855_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
u16 hpllcc = 0;
|
|
/* Assume that the hardware is in the high speed state. This
|
|
* should be the default.
|
|
*/
|
|
switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
|
|
case GC_CLOCK_133_200:
|
|
case GC_CLOCK_100_200:
|
|
return 200000;
|
|
case GC_CLOCK_166_250:
|
|
return 250000;
|
|
case GC_CLOCK_100_133:
|
|
return 133000;
|
|
}
|
|
|
|
/* Shouldn't happen */
|
|
return 0;
|
|
}
|
|
|
|
static int i830_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 133000;
|
|
}
|
|
|
|
struct fdi_m_n {
|
|
u32 tu;
|
|
u32 gmch_m;
|
|
u32 gmch_n;
|
|
u32 link_m;
|
|
u32 link_n;
|
|
};
|
|
|
|
static void
|
|
fdi_reduce_ratio(u32 *num, u32 *den)
|
|
{
|
|
while (*num > 0xffffff || *den > 0xffffff) {
|
|
*num >>= 1;
|
|
*den >>= 1;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
|
|
int link_clock, struct fdi_m_n *m_n)
|
|
{
|
|
m_n->tu = 64; /* default size */
|
|
|
|
/* BUG_ON(pixel_clock > INT_MAX / 36); */
|
|
m_n->gmch_m = bits_per_pixel * pixel_clock;
|
|
m_n->gmch_n = link_clock * nlanes * 8;
|
|
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
|
|
|
|
m_n->link_m = pixel_clock;
|
|
m_n->link_n = link_clock;
|
|
fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
|
|
}
|
|
|
|
|
|
struct intel_watermark_params {
|
|
unsigned long fifo_size;
|
|
unsigned long max_wm;
|
|
unsigned long default_wm;
|
|
unsigned long guard_size;
|
|
unsigned long cacheline_size;
|
|
};
|
|
|
|
/* Pineview has different values for various configs */
|
|
static const struct intel_watermark_params pineview_display_wm = {
|
|
PINEVIEW_DISPLAY_FIFO,
|
|
PINEVIEW_MAX_WM,
|
|
PINEVIEW_DFT_WM,
|
|
PINEVIEW_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params pineview_display_hplloff_wm = {
|
|
PINEVIEW_DISPLAY_FIFO,
|
|
PINEVIEW_MAX_WM,
|
|
PINEVIEW_DFT_HPLLOFF_WM,
|
|
PINEVIEW_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params pineview_cursor_wm = {
|
|
PINEVIEW_CURSOR_FIFO,
|
|
PINEVIEW_CURSOR_MAX_WM,
|
|
PINEVIEW_CURSOR_DFT_WM,
|
|
PINEVIEW_CURSOR_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
|
|
PINEVIEW_CURSOR_FIFO,
|
|
PINEVIEW_CURSOR_MAX_WM,
|
|
PINEVIEW_CURSOR_DFT_WM,
|
|
PINEVIEW_CURSOR_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params g4x_wm_info = {
|
|
G4X_FIFO_SIZE,
|
|
G4X_MAX_WM,
|
|
G4X_MAX_WM,
|
|
2,
|
|
G4X_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params g4x_cursor_wm_info = {
|
|
I965_CURSOR_FIFO,
|
|
I965_CURSOR_MAX_WM,
|
|
I965_CURSOR_DFT_WM,
|
|
2,
|
|
G4X_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i965_cursor_wm_info = {
|
|
I965_CURSOR_FIFO,
|
|
I965_CURSOR_MAX_WM,
|
|
I965_CURSOR_DFT_WM,
|
|
2,
|
|
I915_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i945_wm_info = {
|
|
I945_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I915_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params i915_wm_info = {
|
|
I915_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I915_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params i855_wm_info = {
|
|
I855GM_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I830_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params i830_wm_info = {
|
|
I830_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I830_FIFO_LINE_SIZE
|
|
};
|
|
|
|
static const struct intel_watermark_params ironlake_display_wm_info = {
|
|
ILK_DISPLAY_FIFO,
|
|
ILK_DISPLAY_MAXWM,
|
|
ILK_DISPLAY_DFTWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params ironlake_cursor_wm_info = {
|
|
ILK_CURSOR_FIFO,
|
|
ILK_CURSOR_MAXWM,
|
|
ILK_CURSOR_DFTWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params ironlake_display_srwm_info = {
|
|
ILK_DISPLAY_SR_FIFO,
|
|
ILK_DISPLAY_MAX_SRWM,
|
|
ILK_DISPLAY_DFT_SRWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params ironlake_cursor_srwm_info = {
|
|
ILK_CURSOR_SR_FIFO,
|
|
ILK_CURSOR_MAX_SRWM,
|
|
ILK_CURSOR_DFT_SRWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
|
|
static const struct intel_watermark_params sandybridge_display_wm_info = {
|
|
SNB_DISPLAY_FIFO,
|
|
SNB_DISPLAY_MAXWM,
|
|
SNB_DISPLAY_DFTWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params sandybridge_cursor_wm_info = {
|
|
SNB_CURSOR_FIFO,
|
|
SNB_CURSOR_MAXWM,
|
|
SNB_CURSOR_DFTWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params sandybridge_display_srwm_info = {
|
|
SNB_DISPLAY_SR_FIFO,
|
|
SNB_DISPLAY_MAX_SRWM,
|
|
SNB_DISPLAY_DFT_SRWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params sandybridge_cursor_srwm_info = {
|
|
SNB_CURSOR_SR_FIFO,
|
|
SNB_CURSOR_MAX_SRWM,
|
|
SNB_CURSOR_DFT_SRWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
|
|
|
|
/**
|
|
* intel_calculate_wm - calculate watermark level
|
|
* @clock_in_khz: pixel clock
|
|
* @wm: chip FIFO params
|
|
* @pixel_size: display pixel size
|
|
* @latency_ns: memory latency for the platform
|
|
*
|
|
* Calculate the watermark level (the level at which the display plane will
|
|
* start fetching from memory again). Each chip has a different display
|
|
* FIFO size and allocation, so the caller needs to figure that out and pass
|
|
* in the correct intel_watermark_params structure.
|
|
*
|
|
* As the pixel clock runs, the FIFO will be drained at a rate that depends
|
|
* on the pixel size. When it reaches the watermark level, it'll start
|
|
* fetching FIFO line sized based chunks from memory until the FIFO fills
|
|
* past the watermark point. If the FIFO drains completely, a FIFO underrun
|
|
* will occur, and a display engine hang could result.
|
|
*/
|
|
static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
|
|
const struct intel_watermark_params *wm,
|
|
int fifo_size,
|
|
int pixel_size,
|
|
unsigned long latency_ns)
|
|
{
|
|
long entries_required, wm_size;
|
|
|
|
/*
|
|
* Note: we need to make sure we don't overflow for various clock &
|
|
* latency values.
|
|
* clocks go from a few thousand to several hundred thousand.
|
|
* latency is usually a few thousand
|
|
*/
|
|
entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
|
|
1000;
|
|
entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
|
|
|
|
DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);
|
|
|
|
wm_size = fifo_size - (entries_required + wm->guard_size);
|
|
|
|
DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);
|
|
|
|
/* Don't promote wm_size to unsigned... */
|
|
if (wm_size > (long)wm->max_wm)
|
|
wm_size = wm->max_wm;
|
|
if (wm_size <= 0)
|
|
wm_size = wm->default_wm;
|
|
return wm_size;
|
|
}
|
|
|
|
struct cxsr_latency {
|
|
int is_desktop;
|
|
int is_ddr3;
|
|
unsigned long fsb_freq;
|
|
unsigned long mem_freq;
|
|
unsigned long display_sr;
|
|
unsigned long display_hpll_disable;
|
|
unsigned long cursor_sr;
|
|
unsigned long cursor_hpll_disable;
|
|
};
|
|
|
|
static const struct cxsr_latency cxsr_latency_table[] = {
|
|
{1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
|
|
{1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
|
|
{1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
|
|
{1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
|
|
{1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
|
|
|
|
{1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
|
|
{1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
|
|
{1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
|
|
{1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
|
|
{1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
|
|
|
|
{1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
|
|
{1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
|
|
{1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
|
|
{1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
|
|
{1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
|
|
{0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
|
|
{0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
|
|
{0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
|
|
{0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
|
|
{0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
|
|
{0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
|
|
{0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
|
|
{0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
|
|
{0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
|
|
{0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
|
|
{0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
|
|
{0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
|
|
};
|
|
|
|
static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
|
|
int is_ddr3,
|
|
int fsb,
|
|
int mem)
|
|
{
|
|
const struct cxsr_latency *latency;
|
|
int i;
|
|
|
|
if (fsb == 0 || mem == 0)
|
|
return NULL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
|
|
latency = &cxsr_latency_table[i];
|
|
if (is_desktop == latency->is_desktop &&
|
|
is_ddr3 == latency->is_ddr3 &&
|
|
fsb == latency->fsb_freq && mem == latency->mem_freq)
|
|
return latency;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void pineview_disable_cxsr(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/* deactivate cxsr */
|
|
I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
|
|
}
|
|
|
|
/*
|
|
* Latency for FIFO fetches is dependent on several factors:
|
|
* - memory configuration (speed, channels)
|
|
* - chipset
|
|
* - current MCH state
|
|
* It can be fairly high in some situations, so here we assume a fairly
|
|
* pessimal value. It's a tradeoff between extra memory fetches (if we
|
|
* set this value too high, the FIFO will fetch frequently to stay full)
|
|
* and power consumption (set it too low to save power and we might see
|
|
* FIFO underruns and display "flicker").
|
|
*
|
|
* A value of 5us seems to be a good balance; safe for very low end
|
|
* platforms but not overly aggressive on lower latency configs.
|
|
*/
|
|
static const int latency_ns = 5000;
|
|
|
|
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
if (plane)
|
|
size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i85x_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x1ff;
|
|
if (plane)
|
|
size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
|
|
size >>= 1; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i845_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
size >>= 2; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A",
|
|
size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i830_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
size >>= 1; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
|
|
{
|
|
struct drm_crtc *crtc, *enabled = NULL;
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
if (crtc->enabled && crtc->fb) {
|
|
if (enabled)
|
|
return NULL;
|
|
enabled = crtc;
|
|
}
|
|
}
|
|
|
|
return enabled;
|
|
}
|
|
|
|
static void pineview_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
const struct cxsr_latency *latency;
|
|
u32 reg;
|
|
unsigned long wm;
|
|
|
|
latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
|
|
dev_priv->fsb_freq, dev_priv->mem_freq);
|
|
if (!latency) {
|
|
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
|
|
pineview_disable_cxsr(dev);
|
|
return;
|
|
}
|
|
|
|
crtc = single_enabled_crtc(dev);
|
|
if (crtc) {
|
|
int clock = crtc->mode.clock;
|
|
int pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
/* Display SR */
|
|
wm = intel_calculate_wm(clock, &pineview_display_wm,
|
|
pineview_display_wm.fifo_size,
|
|
pixel_size, latency->display_sr);
|
|
reg = I915_READ(DSPFW1);
|
|
reg &= ~DSPFW_SR_MASK;
|
|
reg |= wm << DSPFW_SR_SHIFT;
|
|
I915_WRITE(DSPFW1, reg);
|
|
DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
|
|
|
|
/* cursor SR */
|
|
wm = intel_calculate_wm(clock, &pineview_cursor_wm,
|
|
pineview_display_wm.fifo_size,
|
|
pixel_size, latency->cursor_sr);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_CURSOR_SR_MASK;
|
|
reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
|
|
I915_WRITE(DSPFW3, reg);
|
|
|
|
/* Display HPLL off SR */
|
|
wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
|
|
pineview_display_hplloff_wm.fifo_size,
|
|
pixel_size, latency->display_hpll_disable);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_HPLL_SR_MASK;
|
|
reg |= wm & DSPFW_HPLL_SR_MASK;
|
|
I915_WRITE(DSPFW3, reg);
|
|
|
|
/* cursor HPLL off SR */
|
|
wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
|
|
pineview_display_hplloff_wm.fifo_size,
|
|
pixel_size, latency->cursor_hpll_disable);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_HPLL_CURSOR_MASK;
|
|
reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
|
|
I915_WRITE(DSPFW3, reg);
|
|
DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
|
|
|
|
/* activate cxsr */
|
|
I915_WRITE(DSPFW3,
|
|
I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
|
|
DRM_DEBUG_KMS("Self-refresh is enabled\n");
|
|
} else {
|
|
pineview_disable_cxsr(dev);
|
|
DRM_DEBUG_KMS("Self-refresh is disabled\n");
|
|
}
|
|
}
|
|
|
|
static bool g4x_compute_wm0(struct drm_device *dev,
|
|
int plane,
|
|
const struct intel_watermark_params *display,
|
|
int display_latency_ns,
|
|
const struct intel_watermark_params *cursor,
|
|
int cursor_latency_ns,
|
|
int *plane_wm,
|
|
int *cursor_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int htotal, hdisplay, clock, pixel_size;
|
|
int line_time_us, line_count;
|
|
int entries, tlb_miss;
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
if (crtc->fb == NULL || !crtc->enabled) {
|
|
*cursor_wm = cursor->guard_size;
|
|
*plane_wm = display->guard_size;
|
|
return false;
|
|
}
|
|
|
|
htotal = crtc->mode.htotal;
|
|
hdisplay = crtc->mode.hdisplay;
|
|
clock = crtc->mode.clock;
|
|
pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
/* Use the small buffer method to calculate plane watermark */
|
|
entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
|
|
tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
|
|
if (tlb_miss > 0)
|
|
entries += tlb_miss;
|
|
entries = DIV_ROUND_UP(entries, display->cacheline_size);
|
|
*plane_wm = entries + display->guard_size;
|
|
if (*plane_wm > (int)display->max_wm)
|
|
*plane_wm = display->max_wm;
|
|
|
|
/* Use the large buffer method to calculate cursor watermark */
|
|
line_time_us = ((htotal * 1000) / clock);
|
|
line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
|
|
entries = line_count * 64 * pixel_size;
|
|
tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
|
|
if (tlb_miss > 0)
|
|
entries += tlb_miss;
|
|
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
|
|
*cursor_wm = entries + cursor->guard_size;
|
|
if (*cursor_wm > (int)cursor->max_wm)
|
|
*cursor_wm = (int)cursor->max_wm;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Check the wm result.
|
|
*
|
|
* If any calculated watermark values is larger than the maximum value that
|
|
* can be programmed into the associated watermark register, that watermark
|
|
* must be disabled.
|
|
*/
|
|
static bool g4x_check_srwm(struct drm_device *dev,
|
|
int display_wm, int cursor_wm,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor)
|
|
{
|
|
DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
|
|
display_wm, cursor_wm);
|
|
|
|
if (display_wm > display->max_wm) {
|
|
DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
|
|
display_wm, display->max_wm);
|
|
return false;
|
|
}
|
|
|
|
if (cursor_wm > cursor->max_wm) {
|
|
DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
|
|
cursor_wm, cursor->max_wm);
|
|
return false;
|
|
}
|
|
|
|
if (!(display_wm || cursor_wm)) {
|
|
DRM_DEBUG_KMS("SR latency is 0, disabling\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool g4x_compute_srwm(struct drm_device *dev,
|
|
int plane,
|
|
int latency_ns,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor,
|
|
int *display_wm, int *cursor_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int hdisplay, htotal, pixel_size, clock;
|
|
unsigned long line_time_us;
|
|
int line_count, line_size;
|
|
int small, large;
|
|
int entries;
|
|
|
|
if (!latency_ns) {
|
|
*display_wm = *cursor_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
hdisplay = crtc->mode.hdisplay;
|
|
htotal = crtc->mode.htotal;
|
|
clock = crtc->mode.clock;
|
|
pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
line_time_us = (htotal * 1000) / clock;
|
|
line_count = (latency_ns / line_time_us + 1000) / 1000;
|
|
line_size = hdisplay * pixel_size;
|
|
|
|
/* Use the minimum of the small and large buffer method for primary */
|
|
small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
|
|
large = line_count * line_size;
|
|
|
|
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
|
|
*display_wm = entries + display->guard_size;
|
|
|
|
/* calculate the self-refresh watermark for display cursor */
|
|
entries = line_count * pixel_size * 64;
|
|
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
|
|
*cursor_wm = entries + cursor->guard_size;
|
|
|
|
return g4x_check_srwm(dev,
|
|
*display_wm, *cursor_wm,
|
|
display, cursor);
|
|
}
|
|
|
|
#define single_plane_enabled(mask) is_power_of_2(mask)
|
|
|
|
static void g4x_update_wm(struct drm_device *dev)
|
|
{
|
|
static const int sr_latency_ns = 12000;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
|
|
int plane_sr, cursor_sr;
|
|
unsigned int enabled = 0;
|
|
|
|
if (g4x_compute_wm0(dev, 0,
|
|
&g4x_wm_info, latency_ns,
|
|
&g4x_cursor_wm_info, latency_ns,
|
|
&planea_wm, &cursora_wm))
|
|
enabled |= 1;
|
|
|
|
if (g4x_compute_wm0(dev, 1,
|
|
&g4x_wm_info, latency_ns,
|
|
&g4x_cursor_wm_info, latency_ns,
|
|
&planeb_wm, &cursorb_wm))
|
|
enabled |= 2;
|
|
|
|
plane_sr = cursor_sr = 0;
|
|
if (single_plane_enabled(enabled) &&
|
|
g4x_compute_srwm(dev, ffs(enabled) - 1,
|
|
sr_latency_ns,
|
|
&g4x_wm_info,
|
|
&g4x_cursor_wm_info,
|
|
&plane_sr, &cursor_sr))
|
|
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
|
|
else
|
|
I915_WRITE(FW_BLC_SELF,
|
|
I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN);
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
|
|
planea_wm, cursora_wm,
|
|
planeb_wm, cursorb_wm,
|
|
plane_sr, cursor_sr);
|
|
|
|
I915_WRITE(DSPFW1,
|
|
(plane_sr << DSPFW_SR_SHIFT) |
|
|
(cursorb_wm << DSPFW_CURSORB_SHIFT) |
|
|
(planeb_wm << DSPFW_PLANEB_SHIFT) |
|
|
planea_wm);
|
|
I915_WRITE(DSPFW2,
|
|
(I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
|
|
(cursora_wm << DSPFW_CURSORA_SHIFT));
|
|
/* HPLL off in SR has some issues on G4x... disable it */
|
|
I915_WRITE(DSPFW3,
|
|
(I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
|
|
(cursor_sr << DSPFW_CURSOR_SR_SHIFT));
|
|
}
|
|
|
|
static void i965_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
int srwm = 1;
|
|
int cursor_sr = 16;
|
|
|
|
/* Calc sr entries for one plane configs */
|
|
crtc = single_enabled_crtc(dev);
|
|
if (crtc) {
|
|
/* self-refresh has much higher latency */
|
|
static const int sr_latency_ns = 12000;
|
|
int clock = crtc->mode.clock;
|
|
int htotal = crtc->mode.htotal;
|
|
int hdisplay = crtc->mode.hdisplay;
|
|
int pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
unsigned long line_time_us;
|
|
int entries;
|
|
|
|
line_time_us = ((htotal * 1000) / clock);
|
|
|
|
/* Use ns/us then divide to preserve precision */
|
|
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
|
|
pixel_size * hdisplay;
|
|
entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
|
|
srwm = I965_FIFO_SIZE - entries;
|
|
if (srwm < 0)
|
|
srwm = 1;
|
|
srwm &= 0x1ff;
|
|
DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
|
|
entries, srwm);
|
|
|
|
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
|
|
pixel_size * 64;
|
|
entries = DIV_ROUND_UP(entries,
|
|
i965_cursor_wm_info.cacheline_size);
|
|
cursor_sr = i965_cursor_wm_info.fifo_size -
|
|
(entries + i965_cursor_wm_info.guard_size);
|
|
|
|
if (cursor_sr > i965_cursor_wm_info.max_wm)
|
|
cursor_sr = i965_cursor_wm_info.max_wm;
|
|
|
|
DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
|
|
"cursor %d\n", srwm, cursor_sr);
|
|
|
|
if (IS_CRESTLINE(dev))
|
|
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
|
|
} else {
|
|
/* Turn off self refresh if both pipes are enabled */
|
|
if (IS_CRESTLINE(dev))
|
|
I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
|
|
& ~FW_BLC_SELF_EN);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
|
|
srwm);
|
|
|
|
/* 965 has limitations... */
|
|
I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
|
|
(8 << 16) | (8 << 8) | (8 << 0));
|
|
I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
|
|
/* update cursor SR watermark */
|
|
I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
|
|
}
|
|
|
|
static void i9xx_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
const struct intel_watermark_params *wm_info;
|
|
uint32_t fwater_lo;
|
|
uint32_t fwater_hi;
|
|
int cwm, srwm = 1;
|
|
int fifo_size;
|
|
int planea_wm, planeb_wm;
|
|
struct drm_crtc *crtc, *enabled = NULL;
|
|
|
|
if (IS_I945GM(dev))
|
|
wm_info = &i945_wm_info;
|
|
else if (!IS_GEN2(dev))
|
|
wm_info = &i915_wm_info;
|
|
else
|
|
wm_info = &i855_wm_info;
|
|
|
|
fifo_size = dev_priv->display.get_fifo_size(dev, 0);
|
|
crtc = intel_get_crtc_for_plane(dev, 0);
|
|
if (crtc->enabled && crtc->fb) {
|
|
planea_wm = intel_calculate_wm(crtc->mode.clock,
|
|
wm_info, fifo_size,
|
|
crtc->fb->bits_per_pixel / 8,
|
|
latency_ns);
|
|
enabled = crtc;
|
|
} else
|
|
planea_wm = fifo_size - wm_info->guard_size;
|
|
|
|
fifo_size = dev_priv->display.get_fifo_size(dev, 1);
|
|
crtc = intel_get_crtc_for_plane(dev, 1);
|
|
if (crtc->enabled && crtc->fb) {
|
|
planeb_wm = intel_calculate_wm(crtc->mode.clock,
|
|
wm_info, fifo_size,
|
|
crtc->fb->bits_per_pixel / 8,
|
|
latency_ns);
|
|
if (enabled == NULL)
|
|
enabled = crtc;
|
|
else
|
|
enabled = NULL;
|
|
} else
|
|
planeb_wm = fifo_size - wm_info->guard_size;
|
|
|
|
DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
|
|
|
|
/*
|
|
* Overlay gets an aggressive default since video jitter is bad.
|
|
*/
|
|
cwm = 2;
|
|
|
|
/* Play safe and disable self-refresh before adjusting watermarks. */
|
|
if (IS_I945G(dev) || IS_I945GM(dev))
|
|
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
|
|
else if (IS_I915GM(dev))
|
|
I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
|
|
|
|
/* Calc sr entries for one plane configs */
|
|
if (HAS_FW_BLC(dev) && enabled) {
|
|
/* self-refresh has much higher latency */
|
|
static const int sr_latency_ns = 6000;
|
|
int clock = enabled->mode.clock;
|
|
int htotal = enabled->mode.htotal;
|
|
int hdisplay = enabled->mode.hdisplay;
|
|
int pixel_size = enabled->fb->bits_per_pixel / 8;
|
|
unsigned long line_time_us;
|
|
int entries;
|
|
|
|
line_time_us = (htotal * 1000) / clock;
|
|
|
|
/* Use ns/us then divide to preserve precision */
|
|
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
|
|
pixel_size * hdisplay;
|
|
entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
|
|
DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
|
|
srwm = wm_info->fifo_size - entries;
|
|
if (srwm < 0)
|
|
srwm = 1;
|
|
|
|
if (IS_I945G(dev) || IS_I945GM(dev))
|
|
I915_WRITE(FW_BLC_SELF,
|
|
FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
|
|
else if (IS_I915GM(dev))
|
|
I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
|
|
planea_wm, planeb_wm, cwm, srwm);
|
|
|
|
fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
|
|
fwater_hi = (cwm & 0x1f);
|
|
|
|
/* Set request length to 8 cachelines per fetch */
|
|
fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
|
|
fwater_hi = fwater_hi | (1 << 8);
|
|
|
|
I915_WRITE(FW_BLC, fwater_lo);
|
|
I915_WRITE(FW_BLC2, fwater_hi);
|
|
|
|
if (HAS_FW_BLC(dev)) {
|
|
if (enabled) {
|
|
if (IS_I945G(dev) || IS_I945GM(dev))
|
|
I915_WRITE(FW_BLC_SELF,
|
|
FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
|
|
else if (IS_I915GM(dev))
|
|
I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
|
|
DRM_DEBUG_KMS("memory self refresh enabled\n");
|
|
} else
|
|
DRM_DEBUG_KMS("memory self refresh disabled\n");
|
|
}
|
|
}
|
|
|
|
static void i830_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
uint32_t fwater_lo;
|
|
int planea_wm;
|
|
|
|
crtc = single_enabled_crtc(dev);
|
|
if (crtc == NULL)
|
|
return;
|
|
|
|
planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info,
|
|
dev_priv->display.get_fifo_size(dev, 0),
|
|
crtc->fb->bits_per_pixel / 8,
|
|
latency_ns);
|
|
fwater_lo = I915_READ(FW_BLC) & ~0xfff;
|
|
fwater_lo |= (3<<8) | planea_wm;
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
|
|
|
|
I915_WRITE(FW_BLC, fwater_lo);
|
|
}
|
|
|
|
#define ILK_LP0_PLANE_LATENCY 700
|
|
#define ILK_LP0_CURSOR_LATENCY 1300
|
|
|
|
/*
|
|
* Check the wm result.
|
|
*
|
|
* If any calculated watermark values is larger than the maximum value that
|
|
* can be programmed into the associated watermark register, that watermark
|
|
* must be disabled.
|
|
*/
|
|
static bool ironlake_check_srwm(struct drm_device *dev, int level,
|
|
int fbc_wm, int display_wm, int cursor_wm,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
|
|
" cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
|
|
|
|
if (fbc_wm > SNB_FBC_MAX_SRWM) {
|
|
DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
|
|
fbc_wm, SNB_FBC_MAX_SRWM, level);
|
|
|
|
/* fbc has it's own way to disable FBC WM */
|
|
I915_WRITE(DISP_ARB_CTL,
|
|
I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
|
|
return false;
|
|
}
|
|
|
|
if (display_wm > display->max_wm) {
|
|
DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
|
|
display_wm, SNB_DISPLAY_MAX_SRWM, level);
|
|
return false;
|
|
}
|
|
|
|
if (cursor_wm > cursor->max_wm) {
|
|
DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
|
|
cursor_wm, SNB_CURSOR_MAX_SRWM, level);
|
|
return false;
|
|
}
|
|
|
|
if (!(fbc_wm || display_wm || cursor_wm)) {
|
|
DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Compute watermark values of WM[1-3],
|
|
*/
|
|
static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
|
|
int latency_ns,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor,
|
|
int *fbc_wm, int *display_wm, int *cursor_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
unsigned long line_time_us;
|
|
int hdisplay, htotal, pixel_size, clock;
|
|
int line_count, line_size;
|
|
int small, large;
|
|
int entries;
|
|
|
|
if (!latency_ns) {
|
|
*fbc_wm = *display_wm = *cursor_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
hdisplay = crtc->mode.hdisplay;
|
|
htotal = crtc->mode.htotal;
|
|
clock = crtc->mode.clock;
|
|
pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
line_time_us = (htotal * 1000) / clock;
|
|
line_count = (latency_ns / line_time_us + 1000) / 1000;
|
|
line_size = hdisplay * pixel_size;
|
|
|
|
/* Use the minimum of the small and large buffer method for primary */
|
|
small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
|
|
large = line_count * line_size;
|
|
|
|
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
|
|
*display_wm = entries + display->guard_size;
|
|
|
|
/*
|
|
* Spec says:
|
|
* FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
|
|
*/
|
|
*fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
|
|
|
|
/* calculate the self-refresh watermark for display cursor */
|
|
entries = line_count * pixel_size * 64;
|
|
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
|
|
*cursor_wm = entries + cursor->guard_size;
|
|
|
|
return ironlake_check_srwm(dev, level,
|
|
*fbc_wm, *display_wm, *cursor_wm,
|
|
display, cursor);
|
|
}
|
|
|
|
static void ironlake_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int fbc_wm, plane_wm, cursor_wm;
|
|
unsigned int enabled;
|
|
|
|
enabled = 0;
|
|
if (g4x_compute_wm0(dev, 0,
|
|
&ironlake_display_wm_info,
|
|
ILK_LP0_PLANE_LATENCY,
|
|
&ironlake_cursor_wm_info,
|
|
ILK_LP0_CURSOR_LATENCY,
|
|
&plane_wm, &cursor_wm)) {
|
|
I915_WRITE(WM0_PIPEA_ILK,
|
|
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
|
|
" plane %d, " "cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1;
|
|
}
|
|
|
|
if (g4x_compute_wm0(dev, 1,
|
|
&ironlake_display_wm_info,
|
|
ILK_LP0_PLANE_LATENCY,
|
|
&ironlake_cursor_wm_info,
|
|
ILK_LP0_CURSOR_LATENCY,
|
|
&plane_wm, &cursor_wm)) {
|
|
I915_WRITE(WM0_PIPEB_ILK,
|
|
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 2;
|
|
}
|
|
|
|
/*
|
|
* Calculate and update the self-refresh watermark only when one
|
|
* display plane is used.
|
|
*/
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
if (!single_plane_enabled(enabled))
|
|
return;
|
|
enabled = ffs(enabled) - 1;
|
|
|
|
/* WM1 */
|
|
if (!ironlake_compute_srwm(dev, 1, enabled,
|
|
ILK_READ_WM1_LATENCY() * 500,
|
|
&ironlake_display_srwm_info,
|
|
&ironlake_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM1_LP_ILK,
|
|
WM1_LP_SR_EN |
|
|
(ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM2 */
|
|
if (!ironlake_compute_srwm(dev, 2, enabled,
|
|
ILK_READ_WM2_LATENCY() * 500,
|
|
&ironlake_display_srwm_info,
|
|
&ironlake_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM2_LP_ILK,
|
|
WM2_LP_EN |
|
|
(ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/*
|
|
* WM3 is unsupported on ILK, probably because we don't have latency
|
|
* data for that power state
|
|
*/
|
|
}
|
|
|
|
void sandybridge_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
|
|
u32 val;
|
|
int fbc_wm, plane_wm, cursor_wm;
|
|
unsigned int enabled;
|
|
|
|
enabled = 0;
|
|
if (g4x_compute_wm0(dev, 0,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEA_ILK);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEA_ILK, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
|
|
" plane %d, " "cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1;
|
|
}
|
|
|
|
if (g4x_compute_wm0(dev, 1,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEB_ILK);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEB_ILK, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 2;
|
|
}
|
|
|
|
/* IVB has 3 pipes */
|
|
if (IS_IVYBRIDGE(dev) &&
|
|
g4x_compute_wm0(dev, 2,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEC_IVB);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEC_IVB, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 3;
|
|
}
|
|
|
|
/*
|
|
* Calculate and update the self-refresh watermark only when one
|
|
* display plane is used.
|
|
*
|
|
* SNB support 3 levels of watermark.
|
|
*
|
|
* WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
|
|
* and disabled in the descending order
|
|
*
|
|
*/
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
if (!single_plane_enabled(enabled) ||
|
|
dev_priv->sprite_scaling_enabled)
|
|
return;
|
|
enabled = ffs(enabled) - 1;
|
|
|
|
/* WM1 */
|
|
if (!ironlake_compute_srwm(dev, 1, enabled,
|
|
SNB_READ_WM1_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM1_LP_ILK,
|
|
WM1_LP_SR_EN |
|
|
(SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM2 */
|
|
if (!ironlake_compute_srwm(dev, 2, enabled,
|
|
SNB_READ_WM2_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM2_LP_ILK,
|
|
WM2_LP_EN |
|
|
(SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM3 */
|
|
if (!ironlake_compute_srwm(dev, 3, enabled,
|
|
SNB_READ_WM3_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM3_LP_ILK,
|
|
WM3_LP_EN |
|
|
(SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
}
|
|
|
|
static bool
|
|
sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
|
|
uint32_t sprite_width, int pixel_size,
|
|
const struct intel_watermark_params *display,
|
|
int display_latency_ns, int *sprite_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int clock;
|
|
int entries, tlb_miss;
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
if (crtc->fb == NULL || !crtc->enabled) {
|
|
*sprite_wm = display->guard_size;
|
|
return false;
|
|
}
|
|
|
|
clock = crtc->mode.clock;
|
|
|
|
/* Use the small buffer method to calculate the sprite watermark */
|
|
entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
|
|
tlb_miss = display->fifo_size*display->cacheline_size -
|
|
sprite_width * 8;
|
|
if (tlb_miss > 0)
|
|
entries += tlb_miss;
|
|
entries = DIV_ROUND_UP(entries, display->cacheline_size);
|
|
*sprite_wm = entries + display->guard_size;
|
|
if (*sprite_wm > (int)display->max_wm)
|
|
*sprite_wm = display->max_wm;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
|
|
uint32_t sprite_width, int pixel_size,
|
|
const struct intel_watermark_params *display,
|
|
int latency_ns, int *sprite_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
unsigned long line_time_us;
|
|
int clock;
|
|
int line_count, line_size;
|
|
int small, large;
|
|
int entries;
|
|
|
|
if (!latency_ns) {
|
|
*sprite_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
clock = crtc->mode.clock;
|
|
if (!clock) {
|
|
*sprite_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
line_time_us = (sprite_width * 1000) / clock;
|
|
if (!line_time_us) {
|
|
*sprite_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
line_count = (latency_ns / line_time_us + 1000) / 1000;
|
|
line_size = sprite_width * pixel_size;
|
|
|
|
/* Use the minimum of the small and large buffer method for primary */
|
|
small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
|
|
large = line_count * line_size;
|
|
|
|
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
|
|
*sprite_wm = entries + display->guard_size;
|
|
|
|
return *sprite_wm > 0x3ff ? false : true;
|
|
}
|
|
|
|
static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
|
|
uint32_t sprite_width, int pixel_size)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
|
|
u32 val;
|
|
int sprite_wm, reg;
|
|
int ret;
|
|
|
|
switch (pipe) {
|
|
case 0:
|
|
reg = WM0_PIPEA_ILK;
|
|
break;
|
|
case 1:
|
|
reg = WM0_PIPEB_ILK;
|
|
break;
|
|
case 2:
|
|
reg = WM0_PIPEC_IVB;
|
|
break;
|
|
default:
|
|
return; /* bad pipe */
|
|
}
|
|
|
|
ret = sandybridge_compute_sprite_wm(dev, pipe, sprite_width, pixel_size,
|
|
&sandybridge_display_wm_info,
|
|
latency, &sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite wm for pipe %d\n",
|
|
pipe);
|
|
return;
|
|
}
|
|
|
|
val = I915_READ(reg);
|
|
val &= ~WM0_PIPE_SPRITE_MASK;
|
|
I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
|
|
DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);
|
|
|
|
|
|
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
|
|
pixel_size,
|
|
&sandybridge_display_srwm_info,
|
|
SNB_READ_WM1_LATENCY() * 500,
|
|
&sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %d\n",
|
|
pipe);
|
|
return;
|
|
}
|
|
I915_WRITE(WM1S_LP_ILK, sprite_wm);
|
|
|
|
/* Only IVB has two more LP watermarks for sprite */
|
|
if (!IS_IVYBRIDGE(dev))
|
|
return;
|
|
|
|
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
|
|
pixel_size,
|
|
&sandybridge_display_srwm_info,
|
|
SNB_READ_WM2_LATENCY() * 500,
|
|
&sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %d\n",
|
|
pipe);
|
|
return;
|
|
}
|
|
I915_WRITE(WM2S_LP_IVB, sprite_wm);
|
|
|
|
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
|
|
pixel_size,
|
|
&sandybridge_display_srwm_info,
|
|
SNB_READ_WM3_LATENCY() * 500,
|
|
&sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %d\n",
|
|
pipe);
|
|
return;
|
|
}
|
|
I915_WRITE(WM3S_LP_IVB, sprite_wm);
|
|
}
|
|
|
|
/**
|
|
* intel_update_watermarks - update FIFO watermark values based on current modes
|
|
*
|
|
* Calculate watermark values for the various WM regs based on current mode
|
|
* and plane configuration.
|
|
*
|
|
* There are several cases to deal with here:
|
|
* - normal (i.e. non-self-refresh)
|
|
* - self-refresh (SR) mode
|
|
* - lines are large relative to FIFO size (buffer can hold up to 2)
|
|
* - lines are small relative to FIFO size (buffer can hold more than 2
|
|
* lines), so need to account for TLB latency
|
|
*
|
|
* The normal calculation is:
|
|
* watermark = dotclock * bytes per pixel * latency
|
|
* where latency is platform & configuration dependent (we assume pessimal
|
|
* values here).
|
|
*
|
|
* The SR calculation is:
|
|
* watermark = (trunc(latency/line time)+1) * surface width *
|
|
* bytes per pixel
|
|
* where
|
|
* line time = htotal / dotclock
|
|
* surface width = hdisplay for normal plane and 64 for cursor
|
|
* and latency is assumed to be high, as above.
|
|
*
|
|
* The final value programmed to the register should always be rounded up,
|
|
* and include an extra 2 entries to account for clock crossings.
|
|
*
|
|
* We don't use the sprite, so we can ignore that. And on Crestline we have
|
|
* to set the non-SR watermarks to 8.
|
|
*/
|
|
static void intel_update_watermarks(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->display.update_wm)
|
|
dev_priv->display.update_wm(dev);
|
|
}
|
|
|
|
void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
|
|
uint32_t sprite_width, int pixel_size)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->display.update_sprite_wm)
|
|
dev_priv->display.update_sprite_wm(dev, pipe, sprite_width,
|
|
pixel_size);
|
|
}
|
|
|
|
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (i915_panel_use_ssc >= 0)
|
|
return i915_panel_use_ssc != 0;
|
|
return dev_priv->lvds_use_ssc
|
|
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
|
|
}
|
|
|
|
/**
|
|
* intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
|
|
* @crtc: CRTC structure
|
|
* @mode: requested mode
|
|
*
|
|
* A pipe may be connected to one or more outputs. Based on the depth of the
|
|
* attached framebuffer, choose a good color depth to use on the pipe.
|
|
*
|
|
* If possible, match the pipe depth to the fb depth. In some cases, this
|
|
* isn't ideal, because the connected output supports a lesser or restricted
|
|
* set of depths. Resolve that here:
|
|
* LVDS typically supports only 6bpc, so clamp down in that case
|
|
* HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
|
|
* Displays may support a restricted set as well, check EDID and clamp as
|
|
* appropriate.
|
|
* DP may want to dither down to 6bpc to fit larger modes
|
|
*
|
|
* RETURNS:
|
|
* Dithering requirement (i.e. false if display bpc and pipe bpc match,
|
|
* true if they don't match).
|
|
*/
|
|
static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
|
|
unsigned int *pipe_bpp,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_encoder *encoder;
|
|
struct drm_connector *connector;
|
|
unsigned int display_bpc = UINT_MAX, bpc;
|
|
|
|
/* Walk the encoders & connectors on this crtc, get min bpc */
|
|
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
|
|
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
|
|
|
|
if (encoder->crtc != crtc)
|
|
continue;
|
|
|
|
if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
|
|
unsigned int lvds_bpc;
|
|
|
|
if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
|
|
LVDS_A3_POWER_UP)
|
|
lvds_bpc = 8;
|
|
else
|
|
lvds_bpc = 6;
|
|
|
|
if (lvds_bpc < display_bpc) {
|
|
DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
|
|
display_bpc = lvds_bpc;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
if (intel_encoder->type == INTEL_OUTPUT_EDP) {
|
|
/* Use VBT settings if we have an eDP panel */
|
|
unsigned int edp_bpc = dev_priv->edp.bpp / 3;
|
|
|
|
if (edp_bpc < display_bpc) {
|
|
DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
|
|
display_bpc = edp_bpc;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Not one of the known troublemakers, check the EDID */
|
|
list_for_each_entry(connector, &dev->mode_config.connector_list,
|
|
head) {
|
|
if (connector->encoder != encoder)
|
|
continue;
|
|
|
|
/* Don't use an invalid EDID bpc value */
|
|
if (connector->display_info.bpc &&
|
|
connector->display_info.bpc < display_bpc) {
|
|
DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
|
|
display_bpc = connector->display_info.bpc;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
|
|
* through, clamp it down. (Note: >12bpc will be caught below.)
|
|
*/
|
|
if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
|
|
if (display_bpc > 8 && display_bpc < 12) {
|
|
DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
|
|
display_bpc = 12;
|
|
} else {
|
|
DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
|
|
display_bpc = 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
|
|
DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
|
|
display_bpc = 6;
|
|
}
|
|
|
|
/*
|
|
* We could just drive the pipe at the highest bpc all the time and
|
|
* enable dithering as needed, but that costs bandwidth. So choose
|
|
* the minimum value that expresses the full color range of the fb but
|
|
* also stays within the max display bpc discovered above.
|
|
*/
|
|
|
|
switch (crtc->fb->depth) {
|
|
case 8:
|
|
bpc = 8; /* since we go through a colormap */
|
|
break;
|
|
case 15:
|
|
case 16:
|
|
bpc = 6; /* min is 18bpp */
|
|
break;
|
|
case 24:
|
|
bpc = 8;
|
|
break;
|
|
case 30:
|
|
bpc = 10;
|
|
break;
|
|
case 48:
|
|
bpc = 12;
|
|
break;
|
|
default:
|
|
DRM_DEBUG("unsupported depth, assuming 24 bits\n");
|
|
bpc = min((unsigned int)8, display_bpc);
|
|
break;
|
|
}
|
|
|
|
display_bpc = min(display_bpc, bpc);
|
|
|
|
DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
|
|
bpc, display_bpc);
|
|
|
|
*pipe_bpp = display_bpc * 3;
|
|
|
|
return display_bpc != bpc;
|
|
}
|
|
|
|
static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int refclk;
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
|
|
intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
|
|
refclk = dev_priv->lvds_ssc_freq * 1000;
|
|
DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
|
|
refclk / 1000);
|
|
} else if (!IS_GEN2(dev)) {
|
|
refclk = 96000;
|
|
} else {
|
|
refclk = 48000;
|
|
}
|
|
|
|
return refclk;
|
|
}
|
|
|
|
static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
|
|
intel_clock_t *clock)
|
|
{
|
|
/* SDVO TV has fixed PLL values depend on its clock range,
|
|
this mirrors vbios setting. */
|
|
if (adjusted_mode->clock >= 100000
|
|
&& adjusted_mode->clock < 140500) {
|
|
clock->p1 = 2;
|
|
clock->p2 = 10;
|
|
clock->n = 3;
|
|
clock->m1 = 16;
|
|
clock->m2 = 8;
|
|
} else if (adjusted_mode->clock >= 140500
|
|
&& adjusted_mode->clock <= 200000) {
|
|
clock->p1 = 1;
|
|
clock->p2 = 10;
|
|
clock->n = 6;
|
|
clock->m1 = 12;
|
|
clock->m2 = 8;
|
|
}
|
|
}
|
|
|
|
static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
|
|
intel_clock_t *clock,
|
|
intel_clock_t *reduced_clock)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 fp, fp2 = 0;
|
|
|
|
if (IS_PINEVIEW(dev)) {
|
|
fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
|
|
if (reduced_clock)
|
|
fp2 = (1 << reduced_clock->n) << 16 |
|
|
reduced_clock->m1 << 8 | reduced_clock->m2;
|
|
} else {
|
|
fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
|
|
if (reduced_clock)
|
|
fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
|
|
reduced_clock->m2;
|
|
}
|
|
|
|
I915_WRITE(FP0(pipe), fp);
|
|
|
|
intel_crtc->lowfreq_avail = false;
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
|
|
reduced_clock && i915_powersave) {
|
|
I915_WRITE(FP1(pipe), fp2);
|
|
intel_crtc->lowfreq_avail = true;
|
|
} else {
|
|
I915_WRITE(FP1(pipe), fp);
|
|
}
|
|
}
|
|
|
|
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode,
|
|
int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
int refclk, num_connectors = 0;
|
|
intel_clock_t clock, reduced_clock;
|
|
u32 dpll, dspcntr, pipeconf, vsyncshift;
|
|
bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
|
|
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *encoder;
|
|
const intel_limit_t *limit;
|
|
int ret;
|
|
u32 temp;
|
|
u32 lvds_sync = 0;
|
|
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
|
|
if (encoder->base.crtc != crtc)
|
|
continue;
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
is_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_SDVO:
|
|
case INTEL_OUTPUT_HDMI:
|
|
is_sdvo = true;
|
|
if (encoder->needs_tv_clock)
|
|
is_tv = true;
|
|
break;
|
|
case INTEL_OUTPUT_DVO:
|
|
is_dvo = true;
|
|
break;
|
|
case INTEL_OUTPUT_TVOUT:
|
|
is_tv = true;
|
|
break;
|
|
case INTEL_OUTPUT_ANALOG:
|
|
is_crt = true;
|
|
break;
|
|
case INTEL_OUTPUT_DISPLAYPORT:
|
|
is_dp = true;
|
|
break;
|
|
}
|
|
|
|
num_connectors++;
|
|
}
|
|
|
|
refclk = i9xx_get_refclk(crtc, num_connectors);
|
|
|
|
/*
|
|
* Returns a set of divisors for the desired target clock with the given
|
|
* refclk, or FALSE. The returned values represent the clock equation:
|
|
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
|
|
*/
|
|
limit = intel_limit(crtc, refclk);
|
|
ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
|
|
&clock);
|
|
if (!ok) {
|
|
DRM_ERROR("Couldn't find PLL settings for mode!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Ensure that the cursor is valid for the new mode before changing... */
|
|
intel_crtc_update_cursor(crtc, true);
|
|
|
|
if (is_lvds && dev_priv->lvds_downclock_avail) {
|
|
/*
|
|
* Ensure we match the reduced clock's P to the target clock.
|
|
* If the clocks don't match, we can't switch the display clock
|
|
* by using the FP0/FP1. In such case we will disable the LVDS
|
|
* downclock feature.
|
|
*/
|
|
has_reduced_clock = limit->find_pll(limit, crtc,
|
|
dev_priv->lvds_downclock,
|
|
refclk,
|
|
&clock,
|
|
&reduced_clock);
|
|
}
|
|
|
|
if (is_sdvo && is_tv)
|
|
i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
|
|
|
|
i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
|
|
&reduced_clock : NULL);
|
|
|
|
dpll = DPLL_VGA_MODE_DIS;
|
|
|
|
if (!IS_GEN2(dev)) {
|
|
if (is_lvds)
|
|
dpll |= DPLLB_MODE_LVDS;
|
|
else
|
|
dpll |= DPLLB_MODE_DAC_SERIAL;
|
|
if (is_sdvo) {
|
|
int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
|
|
if (pixel_multiplier > 1) {
|
|
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
|
|
dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
|
|
}
|
|
dpll |= DPLL_DVO_HIGH_SPEED;
|
|
}
|
|
if (is_dp)
|
|
dpll |= DPLL_DVO_HIGH_SPEED;
|
|
|
|
/* compute bitmask from p1 value */
|
|
if (IS_PINEVIEW(dev))
|
|
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
|
|
else {
|
|
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
if (IS_G4X(dev) && has_reduced_clock)
|
|
dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
|
|
}
|
|
switch (clock.p2) {
|
|
case 5:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
|
|
break;
|
|
case 7:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
|
|
break;
|
|
case 10:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
|
|
break;
|
|
case 14:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
|
|
break;
|
|
}
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
|
|
} else {
|
|
if (is_lvds) {
|
|
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
} else {
|
|
if (clock.p1 == 2)
|
|
dpll |= PLL_P1_DIVIDE_BY_TWO;
|
|
else
|
|
dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
if (clock.p2 == 4)
|
|
dpll |= PLL_P2_DIVIDE_BY_4;
|
|
}
|
|
}
|
|
|
|
if (is_sdvo && is_tv)
|
|
dpll |= PLL_REF_INPUT_TVCLKINBC;
|
|
else if (is_tv)
|
|
/* XXX: just matching BIOS for now */
|
|
/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
|
|
dpll |= 3;
|
|
else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
|
|
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
|
|
else
|
|
dpll |= PLL_REF_INPUT_DREFCLK;
|
|
|
|
/* setup pipeconf */
|
|
pipeconf = I915_READ(PIPECONF(pipe));
|
|
|
|
/* Set up the display plane register */
|
|
dspcntr = DISPPLANE_GAMMA_ENABLE;
|
|
|
|
if (pipe == 0)
|
|
dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
|
|
else
|
|
dspcntr |= DISPPLANE_SEL_PIPE_B;
|
|
|
|
if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
|
|
/* Enable pixel doubling when the dot clock is > 90% of the (display)
|
|
* core speed.
|
|
*
|
|
* XXX: No double-wide on 915GM pipe B. Is that the only reason for the
|
|
* pipe == 0 check?
|
|
*/
|
|
if (mode->clock >
|
|
dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
|
|
pipeconf |= PIPECONF_DOUBLE_WIDE;
|
|
else
|
|
pipeconf &= ~PIPECONF_DOUBLE_WIDE;
|
|
}
|
|
|
|
/* default to 8bpc */
|
|
pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
|
|
if (is_dp) {
|
|
if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
|
|
pipeconf |= PIPECONF_BPP_6 |
|
|
PIPECONF_DITHER_EN |
|
|
PIPECONF_DITHER_TYPE_SP;
|
|
}
|
|
}
|
|
|
|
dpll |= DPLL_VCO_ENABLE;
|
|
|
|
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
|
|
drm_mode_debug_printmodeline(mode);
|
|
|
|
I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
|
|
|
|
POSTING_READ(DPLL(pipe));
|
|
udelay(150);
|
|
|
|
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
|
|
* This is an exception to the general rule that mode_set doesn't turn
|
|
* things on.
|
|
*/
|
|
if (is_lvds) {
|
|
temp = I915_READ(LVDS);
|
|
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
|
|
if (pipe == 1) {
|
|
temp |= LVDS_PIPEB_SELECT;
|
|
} else {
|
|
temp &= ~LVDS_PIPEB_SELECT;
|
|
}
|
|
/* set the corresponsding LVDS_BORDER bit */
|
|
temp |= dev_priv->lvds_border_bits;
|
|
/* Set the B0-B3 data pairs corresponding to whether we're going to
|
|
* set the DPLLs for dual-channel mode or not.
|
|
*/
|
|
if (clock.p2 == 7)
|
|
temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
|
|
else
|
|
temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
|
|
|
|
/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
|
|
* appropriately here, but we need to look more thoroughly into how
|
|
* panels behave in the two modes.
|
|
*/
|
|
/* set the dithering flag on LVDS as needed */
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
if (dev_priv->lvds_dither)
|
|
temp |= LVDS_ENABLE_DITHER;
|
|
else
|
|
temp &= ~LVDS_ENABLE_DITHER;
|
|
}
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
|
|
lvds_sync |= LVDS_HSYNC_POLARITY;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
|
|
lvds_sync |= LVDS_VSYNC_POLARITY;
|
|
if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
|
|
!= lvds_sync) {
|
|
char flags[2] = "-+";
|
|
DRM_INFO("Changing LVDS panel from "
|
|
"(%chsync, %cvsync) to (%chsync, %cvsync)\n",
|
|
flags[!(temp & LVDS_HSYNC_POLARITY)],
|
|
flags[!(temp & LVDS_VSYNC_POLARITY)],
|
|
flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
|
|
flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
|
|
temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
|
|
temp |= lvds_sync;
|
|
}
|
|
I915_WRITE(LVDS, temp);
|
|
}
|
|
|
|
if (is_dp) {
|
|
intel_dp_set_m_n(crtc, mode, adjusted_mode);
|
|
}
|
|
|
|
I915_WRITE(DPLL(pipe), dpll);
|
|
|
|
/* Wait for the clocks to stabilize. */
|
|
POSTING_READ(DPLL(pipe));
|
|
udelay(150);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
temp = 0;
|
|
if (is_sdvo) {
|
|
temp = intel_mode_get_pixel_multiplier(adjusted_mode);
|
|
if (temp > 1)
|
|
temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
|
|
else
|
|
temp = 0;
|
|
}
|
|
I915_WRITE(DPLL_MD(pipe), temp);
|
|
} else {
|
|
/* The pixel multiplier can only be updated once the
|
|
* DPLL is enabled and the clocks are stable.
|
|
*
|
|
* So write it again.
|
|
*/
|
|
I915_WRITE(DPLL(pipe), dpll);
|
|
}
|
|
|
|
if (HAS_PIPE_CXSR(dev)) {
|
|
if (intel_crtc->lowfreq_avail) {
|
|
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
|
|
pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
|
|
} else {
|
|
DRM_DEBUG_KMS("disabling CxSR downclocking\n");
|
|
pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
|
|
}
|
|
}
|
|
|
|
pipeconf &= ~PIPECONF_INTERLACE_MASK;
|
|
if (!IS_GEN2(dev) &&
|
|
adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
|
|
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
|
|
/* the chip adds 2 halflines automatically */
|
|
adjusted_mode->crtc_vtotal -= 1;
|
|
adjusted_mode->crtc_vblank_end -= 1;
|
|
vsyncshift = adjusted_mode->crtc_hsync_start
|
|
- adjusted_mode->crtc_htotal/2;
|
|
} else {
|
|
pipeconf |= PIPECONF_PROGRESSIVE;
|
|
vsyncshift = 0;
|
|
}
|
|
|
|
if (!IS_GEN3(dev))
|
|
I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
|
|
|
|
I915_WRITE(HTOTAL(pipe),
|
|
(adjusted_mode->crtc_hdisplay - 1) |
|
|
((adjusted_mode->crtc_htotal - 1) << 16));
|
|
I915_WRITE(HBLANK(pipe),
|
|
(adjusted_mode->crtc_hblank_start - 1) |
|
|
((adjusted_mode->crtc_hblank_end - 1) << 16));
|
|
I915_WRITE(HSYNC(pipe),
|
|
(adjusted_mode->crtc_hsync_start - 1) |
|
|
((adjusted_mode->crtc_hsync_end - 1) << 16));
|
|
|
|
I915_WRITE(VTOTAL(pipe),
|
|
(adjusted_mode->crtc_vdisplay - 1) |
|
|
((adjusted_mode->crtc_vtotal - 1) << 16));
|
|
I915_WRITE(VBLANK(pipe),
|
|
(adjusted_mode->crtc_vblank_start - 1) |
|
|
((adjusted_mode->crtc_vblank_end - 1) << 16));
|
|
I915_WRITE(VSYNC(pipe),
|
|
(adjusted_mode->crtc_vsync_start - 1) |
|
|
((adjusted_mode->crtc_vsync_end - 1) << 16));
|
|
|
|
/* pipesrc and dspsize control the size that is scaled from,
|
|
* which should always be the user's requested size.
|
|
*/
|
|
I915_WRITE(DSPSIZE(plane),
|
|
((mode->vdisplay - 1) << 16) |
|
|
(mode->hdisplay - 1));
|
|
I915_WRITE(DSPPOS(plane), 0);
|
|
I915_WRITE(PIPESRC(pipe),
|
|
((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
|
|
|
|
I915_WRITE(PIPECONF(pipe), pipeconf);
|
|
POSTING_READ(PIPECONF(pipe));
|
|
intel_enable_pipe(dev_priv, pipe, false);
|
|
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
I915_WRITE(DSPCNTR(plane), dspcntr);
|
|
POSTING_READ(DSPCNTR(plane));
|
|
intel_enable_plane(dev_priv, plane, pipe);
|
|
|
|
ret = intel_pipe_set_base(crtc, x, y, old_fb);
|
|
|
|
intel_update_watermarks(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Initialize reference clocks when the driver loads
|
|
*/
|
|
void ironlake_init_pch_refclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *encoder;
|
|
u32 temp;
|
|
bool has_lvds = false;
|
|
bool has_cpu_edp = false;
|
|
bool has_pch_edp = false;
|
|
bool has_panel = false;
|
|
bool has_ck505 = false;
|
|
bool can_ssc = false;
|
|
|
|
/* We need to take the global config into account */
|
|
list_for_each_entry(encoder, &mode_config->encoder_list,
|
|
base.head) {
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
has_panel = true;
|
|
has_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_EDP:
|
|
has_panel = true;
|
|
if (intel_encoder_is_pch_edp(&encoder->base))
|
|
has_pch_edp = true;
|
|
else
|
|
has_cpu_edp = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (HAS_PCH_IBX(dev)) {
|
|
has_ck505 = dev_priv->display_clock_mode;
|
|
can_ssc = has_ck505;
|
|
} else {
|
|
has_ck505 = false;
|
|
can_ssc = true;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
|
|
has_panel, has_lvds, has_pch_edp, has_cpu_edp,
|
|
has_ck505);
|
|
|
|
/* Ironlake: try to setup display ref clock before DPLL
|
|
* enabling. This is only under driver's control after
|
|
* PCH B stepping, previous chipset stepping should be
|
|
* ignoring this setting.
|
|
*/
|
|
temp = I915_READ(PCH_DREF_CONTROL);
|
|
/* Always enable nonspread source */
|
|
temp &= ~DREF_NONSPREAD_SOURCE_MASK;
|
|
|
|
if (has_ck505)
|
|
temp |= DREF_NONSPREAD_CK505_ENABLE;
|
|
else
|
|
temp |= DREF_NONSPREAD_SOURCE_ENABLE;
|
|
|
|
if (has_panel) {
|
|
temp &= ~DREF_SSC_SOURCE_MASK;
|
|
temp |= DREF_SSC_SOURCE_ENABLE;
|
|
|
|
/* SSC must be turned on before enabling the CPU output */
|
|
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
|
|
DRM_DEBUG_KMS("Using SSC on panel\n");
|
|
temp |= DREF_SSC1_ENABLE;
|
|
}
|
|
|
|
/* Get SSC going before enabling the outputs */
|
|
I915_WRITE(PCH_DREF_CONTROL, temp);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
|
|
temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
|
|
|
|
/* Enable CPU source on CPU attached eDP */
|
|
if (has_cpu_edp) {
|
|
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
|
|
DRM_DEBUG_KMS("Using SSC on eDP\n");
|
|
temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
|
|
}
|
|
else
|
|
temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
|
|
} else
|
|
temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
|
|
|
|
I915_WRITE(PCH_DREF_CONTROL, temp);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
} else {
|
|
DRM_DEBUG_KMS("Disabling SSC entirely\n");
|
|
|
|
temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
|
|
|
|
/* Turn off CPU output */
|
|
temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
|
|
|
|
I915_WRITE(PCH_DREF_CONTROL, temp);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
|
|
/* Turn off the SSC source */
|
|
temp &= ~DREF_SSC_SOURCE_MASK;
|
|
temp |= DREF_SSC_SOURCE_DISABLE;
|
|
|
|
/* Turn off SSC1 */
|
|
temp &= ~ DREF_SSC1_ENABLE;
|
|
|
|
I915_WRITE(PCH_DREF_CONTROL, temp);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
}
|
|
}
|
|
|
|
static int ironlake_get_refclk(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_encoder *encoder;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *edp_encoder = NULL;
|
|
int num_connectors = 0;
|
|
bool is_lvds = false;
|
|
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
|
|
if (encoder->base.crtc != crtc)
|
|
continue;
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
is_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_EDP:
|
|
edp_encoder = encoder;
|
|
break;
|
|
}
|
|
num_connectors++;
|
|
}
|
|
|
|
if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
|
|
DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
|
|
dev_priv->lvds_ssc_freq);
|
|
return dev_priv->lvds_ssc_freq * 1000;
|
|
}
|
|
|
|
return 120000;
|
|
}
|
|
|
|
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode,
|
|
int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int plane = intel_crtc->plane;
|
|
int refclk, num_connectors = 0;
|
|
intel_clock_t clock, reduced_clock;
|
|
u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
|
|
bool ok, has_reduced_clock = false, is_sdvo = false;
|
|
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
|
|
struct intel_encoder *has_edp_encoder = NULL;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *encoder;
|
|
const intel_limit_t *limit;
|
|
int ret;
|
|
struct fdi_m_n m_n = {0};
|
|
u32 temp;
|
|
u32 lvds_sync = 0;
|
|
int target_clock, pixel_multiplier, lane, link_bw, factor;
|
|
unsigned int pipe_bpp;
|
|
bool dither;
|
|
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
|
|
if (encoder->base.crtc != crtc)
|
|
continue;
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
is_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_SDVO:
|
|
case INTEL_OUTPUT_HDMI:
|
|
is_sdvo = true;
|
|
if (encoder->needs_tv_clock)
|
|
is_tv = true;
|
|
break;
|
|
case INTEL_OUTPUT_TVOUT:
|
|
is_tv = true;
|
|
break;
|
|
case INTEL_OUTPUT_ANALOG:
|
|
is_crt = true;
|
|
break;
|
|
case INTEL_OUTPUT_DISPLAYPORT:
|
|
is_dp = true;
|
|
break;
|
|
case INTEL_OUTPUT_EDP:
|
|
has_edp_encoder = encoder;
|
|
break;
|
|
}
|
|
|
|
num_connectors++;
|
|
}
|
|
|
|
refclk = ironlake_get_refclk(crtc);
|
|
|
|
/*
|
|
* Returns a set of divisors for the desired target clock with the given
|
|
* refclk, or FALSE. The returned values represent the clock equation:
|
|
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
|
|
*/
|
|
limit = intel_limit(crtc, refclk);
|
|
ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
|
|
&clock);
|
|
if (!ok) {
|
|
DRM_ERROR("Couldn't find PLL settings for mode!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Ensure that the cursor is valid for the new mode before changing... */
|
|
intel_crtc_update_cursor(crtc, true);
|
|
|
|
if (is_lvds && dev_priv->lvds_downclock_avail) {
|
|
/*
|
|
* Ensure we match the reduced clock's P to the target clock.
|
|
* If the clocks don't match, we can't switch the display clock
|
|
* by using the FP0/FP1. In such case we will disable the LVDS
|
|
* downclock feature.
|
|
*/
|
|
has_reduced_clock = limit->find_pll(limit, crtc,
|
|
dev_priv->lvds_downclock,
|
|
refclk,
|
|
&clock,
|
|
&reduced_clock);
|
|
}
|
|
/* SDVO TV has fixed PLL values depend on its clock range,
|
|
this mirrors vbios setting. */
|
|
if (is_sdvo && is_tv) {
|
|
if (adjusted_mode->clock >= 100000
|
|
&& adjusted_mode->clock < 140500) {
|
|
clock.p1 = 2;
|
|
clock.p2 = 10;
|
|
clock.n = 3;
|
|
clock.m1 = 16;
|
|
clock.m2 = 8;
|
|
} else if (adjusted_mode->clock >= 140500
|
|
&& adjusted_mode->clock <= 200000) {
|
|
clock.p1 = 1;
|
|
clock.p2 = 10;
|
|
clock.n = 6;
|
|
clock.m1 = 12;
|
|
clock.m2 = 8;
|
|
}
|
|
}
|
|
|
|
/* FDI link */
|
|
pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
|
|
lane = 0;
|
|
/* CPU eDP doesn't require FDI link, so just set DP M/N
|
|
according to current link config */
|
|
if (has_edp_encoder &&
|
|
!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
|
|
target_clock = mode->clock;
|
|
intel_edp_link_config(has_edp_encoder,
|
|
&lane, &link_bw);
|
|
} else {
|
|
/* [e]DP over FDI requires target mode clock
|
|
instead of link clock */
|
|
if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
|
|
target_clock = mode->clock;
|
|
else
|
|
target_clock = adjusted_mode->clock;
|
|
|
|
/* FDI is a binary signal running at ~2.7GHz, encoding
|
|
* each output octet as 10 bits. The actual frequency
|
|
* is stored as a divider into a 100MHz clock, and the
|
|
* mode pixel clock is stored in units of 1KHz.
|
|
* Hence the bw of each lane in terms of the mode signal
|
|
* is:
|
|
*/
|
|
link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
|
|
}
|
|
|
|
/* determine panel color depth */
|
|
temp = I915_READ(PIPECONF(pipe));
|
|
temp &= ~PIPE_BPC_MASK;
|
|
dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
|
|
switch (pipe_bpp) {
|
|
case 18:
|
|
temp |= PIPE_6BPC;
|
|
break;
|
|
case 24:
|
|
temp |= PIPE_8BPC;
|
|
break;
|
|
case 30:
|
|
temp |= PIPE_10BPC;
|
|
break;
|
|
case 36:
|
|
temp |= PIPE_12BPC;
|
|
break;
|
|
default:
|
|
WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n",
|
|
pipe_bpp);
|
|
temp |= PIPE_8BPC;
|
|
pipe_bpp = 24;
|
|
break;
|
|
}
|
|
|
|
intel_crtc->bpp = pipe_bpp;
|
|
I915_WRITE(PIPECONF(pipe), temp);
|
|
|
|
if (!lane) {
|
|
/*
|
|
* Account for spread spectrum to avoid
|
|
* oversubscribing the link. Max center spread
|
|
* is 2.5%; use 5% for safety's sake.
|
|
*/
|
|
u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
|
|
lane = bps / (link_bw * 8) + 1;
|
|
}
|
|
|
|
intel_crtc->fdi_lanes = lane;
|
|
|
|
if (pixel_multiplier > 1)
|
|
link_bw *= pixel_multiplier;
|
|
ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
|
|
&m_n);
|
|
|
|
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
|
|
if (has_reduced_clock)
|
|
fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
|
|
reduced_clock.m2;
|
|
|
|
/* Enable autotuning of the PLL clock (if permissible) */
|
|
factor = 21;
|
|
if (is_lvds) {
|
|
if ((intel_panel_use_ssc(dev_priv) &&
|
|
dev_priv->lvds_ssc_freq == 100) ||
|
|
(I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
|
|
factor = 25;
|
|
} else if (is_sdvo && is_tv)
|
|
factor = 20;
|
|
|
|
if (clock.m < factor * clock.n)
|
|
fp |= FP_CB_TUNE;
|
|
|
|
dpll = 0;
|
|
|
|
if (is_lvds)
|
|
dpll |= DPLLB_MODE_LVDS;
|
|
else
|
|
dpll |= DPLLB_MODE_DAC_SERIAL;
|
|
if (is_sdvo) {
|
|
int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
|
|
if (pixel_multiplier > 1) {
|
|
dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
|
|
}
|
|
dpll |= DPLL_DVO_HIGH_SPEED;
|
|
}
|
|
if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
|
|
dpll |= DPLL_DVO_HIGH_SPEED;
|
|
|
|
/* compute bitmask from p1 value */
|
|
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
/* also FPA1 */
|
|
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
|
|
|
|
switch (clock.p2) {
|
|
case 5:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
|
|
break;
|
|
case 7:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
|
|
break;
|
|
case 10:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
|
|
break;
|
|
case 14:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
|
|
break;
|
|
}
|
|
|
|
if (is_sdvo && is_tv)
|
|
dpll |= PLL_REF_INPUT_TVCLKINBC;
|
|
else if (is_tv)
|
|
/* XXX: just matching BIOS for now */
|
|
/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
|
|
dpll |= 3;
|
|
else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
|
|
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
|
|
else
|
|
dpll |= PLL_REF_INPUT_DREFCLK;
|
|
|
|
/* setup pipeconf */
|
|
pipeconf = I915_READ(PIPECONF(pipe));
|
|
|
|
/* Set up the display plane register */
|
|
dspcntr = DISPPLANE_GAMMA_ENABLE;
|
|
|
|
DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
|
|
drm_mode_debug_printmodeline(mode);
|
|
|
|
/* PCH eDP needs FDI, but CPU eDP does not */
|
|
if (!intel_crtc->no_pll) {
|
|
if (!has_edp_encoder ||
|
|
intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
|
|
I915_WRITE(PCH_FP0(pipe), fp);
|
|
I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
|
|
|
|
POSTING_READ(PCH_DPLL(pipe));
|
|
udelay(150);
|
|
}
|
|
} else {
|
|
if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
|
|
fp == I915_READ(PCH_FP0(0))) {
|
|
intel_crtc->use_pll_a = true;
|
|
DRM_DEBUG_KMS("using pipe a dpll\n");
|
|
} else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
|
|
fp == I915_READ(PCH_FP0(1))) {
|
|
intel_crtc->use_pll_a = false;
|
|
DRM_DEBUG_KMS("using pipe b dpll\n");
|
|
} else {
|
|
DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
|
|
* This is an exception to the general rule that mode_set doesn't turn
|
|
* things on.
|
|
*/
|
|
if (is_lvds) {
|
|
temp = I915_READ(PCH_LVDS);
|
|
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~PORT_TRANS_SEL_MASK;
|
|
temp |= PORT_TRANS_SEL_CPT(pipe);
|
|
} else {
|
|
if (pipe == 1)
|
|
temp |= LVDS_PIPEB_SELECT;
|
|
else
|
|
temp &= ~LVDS_PIPEB_SELECT;
|
|
}
|
|
|
|
/* set the corresponsding LVDS_BORDER bit */
|
|
temp |= dev_priv->lvds_border_bits;
|
|
/* Set the B0-B3 data pairs corresponding to whether we're going to
|
|
* set the DPLLs for dual-channel mode or not.
|
|
*/
|
|
if (clock.p2 == 7)
|
|
temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
|
|
else
|
|
temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
|
|
|
|
/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
|
|
* appropriately here, but we need to look more thoroughly into how
|
|
* panels behave in the two modes.
|
|
*/
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
|
|
lvds_sync |= LVDS_HSYNC_POLARITY;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
|
|
lvds_sync |= LVDS_VSYNC_POLARITY;
|
|
if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
|
|
!= lvds_sync) {
|
|
char flags[2] = "-+";
|
|
DRM_INFO("Changing LVDS panel from "
|
|
"(%chsync, %cvsync) to (%chsync, %cvsync)\n",
|
|
flags[!(temp & LVDS_HSYNC_POLARITY)],
|
|
flags[!(temp & LVDS_VSYNC_POLARITY)],
|
|
flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
|
|
flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
|
|
temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
|
|
temp |= lvds_sync;
|
|
}
|
|
I915_WRITE(PCH_LVDS, temp);
|
|
}
|
|
|
|
pipeconf &= ~PIPECONF_DITHER_EN;
|
|
pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
|
|
if ((is_lvds && dev_priv->lvds_dither) || dither) {
|
|
pipeconf |= PIPECONF_DITHER_EN;
|
|
pipeconf |= PIPECONF_DITHER_TYPE_SP;
|
|
}
|
|
if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
|
|
intel_dp_set_m_n(crtc, mode, adjusted_mode);
|
|
} else {
|
|
/* For non-DP output, clear any trans DP clock recovery setting.*/
|
|
I915_WRITE(TRANSDATA_M1(pipe), 0);
|
|
I915_WRITE(TRANSDATA_N1(pipe), 0);
|
|
I915_WRITE(TRANSDPLINK_M1(pipe), 0);
|
|
I915_WRITE(TRANSDPLINK_N1(pipe), 0);
|
|
}
|
|
|
|
if (!intel_crtc->no_pll &&
|
|
(!has_edp_encoder ||
|
|
intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
|
|
I915_WRITE(PCH_DPLL(pipe), dpll);
|
|
|
|
/* Wait for the clocks to stabilize. */
|
|
POSTING_READ(PCH_DPLL(pipe));
|
|
udelay(150);
|
|
|
|
/* The pixel multiplier can only be updated once the
|
|
* DPLL is enabled and the clocks are stable.
|
|
*
|
|
* So write it again.
|
|
*/
|
|
I915_WRITE(PCH_DPLL(pipe), dpll);
|
|
}
|
|
|
|
intel_crtc->lowfreq_avail = false;
|
|
if (!intel_crtc->no_pll) {
|
|
if (is_lvds && has_reduced_clock && i915_powersave) {
|
|
I915_WRITE(PCH_FP1(pipe), fp2);
|
|
intel_crtc->lowfreq_avail = true;
|
|
if (HAS_PIPE_CXSR(dev)) {
|
|
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
|
|
pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
|
|
}
|
|
} else {
|
|
I915_WRITE(PCH_FP1(pipe), fp);
|
|
if (HAS_PIPE_CXSR(dev)) {
|
|
DRM_DEBUG_KMS("disabling CxSR downclocking\n");
|
|
pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
|
|
}
|
|
}
|
|
}
|
|
|
|
pipeconf &= ~PIPECONF_INTERLACE_MASK;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
|
|
pipeconf |= PIPECONF_INTERLACED_ILK;
|
|
/* the chip adds 2 halflines automatically */
|
|
adjusted_mode->crtc_vtotal -= 1;
|
|
adjusted_mode->crtc_vblank_end -= 1;
|
|
I915_WRITE(VSYNCSHIFT(pipe),
|
|
adjusted_mode->crtc_hsync_start
|
|
- adjusted_mode->crtc_htotal/2);
|
|
} else {
|
|
pipeconf |= PIPECONF_PROGRESSIVE;
|
|
I915_WRITE(VSYNCSHIFT(pipe), 0);
|
|
}
|
|
|
|
I915_WRITE(HTOTAL(pipe),
|
|
(adjusted_mode->crtc_hdisplay - 1) |
|
|
((adjusted_mode->crtc_htotal - 1) << 16));
|
|
I915_WRITE(HBLANK(pipe),
|
|
(adjusted_mode->crtc_hblank_start - 1) |
|
|
((adjusted_mode->crtc_hblank_end - 1) << 16));
|
|
I915_WRITE(HSYNC(pipe),
|
|
(adjusted_mode->crtc_hsync_start - 1) |
|
|
((adjusted_mode->crtc_hsync_end - 1) << 16));
|
|
|
|
I915_WRITE(VTOTAL(pipe),
|
|
(adjusted_mode->crtc_vdisplay - 1) |
|
|
((adjusted_mode->crtc_vtotal - 1) << 16));
|
|
I915_WRITE(VBLANK(pipe),
|
|
(adjusted_mode->crtc_vblank_start - 1) |
|
|
((adjusted_mode->crtc_vblank_end - 1) << 16));
|
|
I915_WRITE(VSYNC(pipe),
|
|
(adjusted_mode->crtc_vsync_start - 1) |
|
|
((adjusted_mode->crtc_vsync_end - 1) << 16));
|
|
|
|
/* pipesrc controls the size that is scaled from, which should
|
|
* always be the user's requested size.
|
|
*/
|
|
I915_WRITE(PIPESRC(pipe),
|
|
((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
|
|
|
|
I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
|
|
I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
|
|
I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
|
|
I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
|
|
|
|
if (has_edp_encoder &&
|
|
!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
|
|
ironlake_set_pll_edp(crtc, adjusted_mode->clock);
|
|
}
|
|
|
|
I915_WRITE(PIPECONF(pipe), pipeconf);
|
|
POSTING_READ(PIPECONF(pipe));
|
|
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
I915_WRITE(DSPCNTR(plane), dspcntr);
|
|
POSTING_READ(DSPCNTR(plane));
|
|
|
|
ret = intel_pipe_set_base(crtc, x, y, old_fb);
|
|
|
|
intel_update_watermarks(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_crtc_mode_set(struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode,
|
|
int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int ret;
|
|
|
|
drm_vblank_pre_modeset(dev, pipe);
|
|
|
|
ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
|
|
x, y, old_fb);
|
|
drm_vblank_post_modeset(dev, pipe);
|
|
|
|
if (ret)
|
|
intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
|
|
else
|
|
intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool intel_eld_uptodate(struct drm_connector *connector,
|
|
int reg_eldv, uint32_t bits_eldv,
|
|
int reg_elda, uint32_t bits_elda,
|
|
int reg_edid)
|
|
{
|
|
struct drm_i915_private *dev_priv = connector->dev->dev_private;
|
|
uint8_t *eld = connector->eld;
|
|
uint32_t i;
|
|
|
|
i = I915_READ(reg_eldv);
|
|
i &= bits_eldv;
|
|
|
|
if (!eld[0])
|
|
return !i;
|
|
|
|
if (!i)
|
|
return false;
|
|
|
|
i = I915_READ(reg_elda);
|
|
i &= ~bits_elda;
|
|
I915_WRITE(reg_elda, i);
|
|
|
|
for (i = 0; i < eld[2]; i++)
|
|
if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void g4x_write_eld(struct drm_connector *connector,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = connector->dev->dev_private;
|
|
uint8_t *eld = connector->eld;
|
|
uint32_t eldv;
|
|
uint32_t len;
|
|
uint32_t i;
|
|
|
|
i = I915_READ(G4X_AUD_VID_DID);
|
|
|
|
if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
|
|
eldv = G4X_ELDV_DEVCL_DEVBLC;
|
|
else
|
|
eldv = G4X_ELDV_DEVCTG;
|
|
|
|
if (intel_eld_uptodate(connector,
|
|
G4X_AUD_CNTL_ST, eldv,
|
|
G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
|
|
G4X_HDMIW_HDMIEDID))
|
|
return;
|
|
|
|
i = I915_READ(G4X_AUD_CNTL_ST);
|
|
i &= ~(eldv | G4X_ELD_ADDR);
|
|
len = (i >> 9) & 0x1f; /* ELD buffer size */
|
|
I915_WRITE(G4X_AUD_CNTL_ST, i);
|
|
|
|
if (!eld[0])
|
|
return;
|
|
|
|
len = min_t(uint8_t, eld[2], len);
|
|
DRM_DEBUG_DRIVER("ELD size %d\n", len);
|
|
for (i = 0; i < len; i++)
|
|
I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
|
|
|
|
i = I915_READ(G4X_AUD_CNTL_ST);
|
|
i |= eldv;
|
|
I915_WRITE(G4X_AUD_CNTL_ST, i);
|
|
}
|
|
|
|
static void ironlake_write_eld(struct drm_connector *connector,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = connector->dev->dev_private;
|
|
uint8_t *eld = connector->eld;
|
|
uint32_t eldv;
|
|
uint32_t i;
|
|
int len;
|
|
int hdmiw_hdmiedid;
|
|
int aud_config;
|
|
int aud_cntl_st;
|
|
int aud_cntrl_st2;
|
|
|
|
if (HAS_PCH_IBX(connector->dev)) {
|
|
hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
|
|
aud_config = IBX_AUD_CONFIG_A;
|
|
aud_cntl_st = IBX_AUD_CNTL_ST_A;
|
|
aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
|
|
} else {
|
|
hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
|
|
aud_config = CPT_AUD_CONFIG_A;
|
|
aud_cntl_st = CPT_AUD_CNTL_ST_A;
|
|
aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
|
|
}
|
|
|
|
i = to_intel_crtc(crtc)->pipe;
|
|
hdmiw_hdmiedid += i * 0x100;
|
|
aud_cntl_st += i * 0x100;
|
|
aud_config += i * 0x100;
|
|
|
|
DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
|
|
|
|
i = I915_READ(aud_cntl_st);
|
|
i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */
|
|
if (!i) {
|
|
DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
|
|
/* operate blindly on all ports */
|
|
eldv = IBX_ELD_VALIDB;
|
|
eldv |= IBX_ELD_VALIDB << 4;
|
|
eldv |= IBX_ELD_VALIDB << 8;
|
|
} else {
|
|
DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
|
|
eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
|
|
}
|
|
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
|
|
DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
|
|
eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
|
|
I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
|
|
} else
|
|
I915_WRITE(aud_config, 0);
|
|
|
|
if (intel_eld_uptodate(connector,
|
|
aud_cntrl_st2, eldv,
|
|
aud_cntl_st, IBX_ELD_ADDRESS,
|
|
hdmiw_hdmiedid))
|
|
return;
|
|
|
|
i = I915_READ(aud_cntrl_st2);
|
|
i &= ~eldv;
|
|
I915_WRITE(aud_cntrl_st2, i);
|
|
|
|
if (!eld[0])
|
|
return;
|
|
|
|
i = I915_READ(aud_cntl_st);
|
|
i &= ~IBX_ELD_ADDRESS;
|
|
I915_WRITE(aud_cntl_st, i);
|
|
|
|
len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
|
|
DRM_DEBUG_DRIVER("ELD size %d\n", len);
|
|
for (i = 0; i < len; i++)
|
|
I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
|
|
|
|
i = I915_READ(aud_cntrl_st2);
|
|
i |= eldv;
|
|
I915_WRITE(aud_cntrl_st2, i);
|
|
}
|
|
|
|
void intel_write_eld(struct drm_encoder *encoder,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct drm_crtc *crtc = encoder->crtc;
|
|
struct drm_connector *connector;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
connector = drm_select_eld(encoder, mode);
|
|
if (!connector)
|
|
return;
|
|
|
|
DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
|
|
connector->base.id,
|
|
drm_get_connector_name(connector),
|
|
connector->encoder->base.id,
|
|
drm_get_encoder_name(connector->encoder));
|
|
|
|
connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
|
|
|
|
if (dev_priv->display.write_eld)
|
|
dev_priv->display.write_eld(connector, crtc);
|
|
}
|
|
|
|
/** Loads the palette/gamma unit for the CRTC with the prepared values */
|
|
void intel_crtc_load_lut(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int palreg = PALETTE(intel_crtc->pipe);
|
|
int i;
|
|
|
|
/* The clocks have to be on to load the palette. */
|
|
if (!crtc->enabled || !intel_crtc->active)
|
|
return;
|
|
|
|
/* use legacy palette for Ironlake */
|
|
if (HAS_PCH_SPLIT(dev))
|
|
palreg = LGC_PALETTE(intel_crtc->pipe);
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
I915_WRITE(palreg + 4 * i,
|
|
(intel_crtc->lut_r[i] << 16) |
|
|
(intel_crtc->lut_g[i] << 8) |
|
|
intel_crtc->lut_b[i]);
|
|
}
|
|
}
|
|
|
|
static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
bool visible = base != 0;
|
|
u32 cntl;
|
|
|
|
if (intel_crtc->cursor_visible == visible)
|
|
return;
|
|
|
|
cntl = I915_READ(_CURACNTR);
|
|
if (visible) {
|
|
/* On these chipsets we can only modify the base whilst
|
|
* the cursor is disabled.
|
|
*/
|
|
I915_WRITE(_CURABASE, base);
|
|
|
|
cntl &= ~(CURSOR_FORMAT_MASK);
|
|
/* XXX width must be 64, stride 256 => 0x00 << 28 */
|
|
cntl |= CURSOR_ENABLE |
|
|
CURSOR_GAMMA_ENABLE |
|
|
CURSOR_FORMAT_ARGB;
|
|
} else
|
|
cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
|
|
I915_WRITE(_CURACNTR, cntl);
|
|
|
|
intel_crtc->cursor_visible = visible;
|
|
}
|
|
|
|
static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
bool visible = base != 0;
|
|
|
|
if (intel_crtc->cursor_visible != visible) {
|
|
uint32_t cntl = I915_READ(CURCNTR(pipe));
|
|
if (base) {
|
|
cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
|
|
cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
|
|
cntl |= pipe << 28; /* Connect to correct pipe */
|
|
} else {
|
|
cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
|
|
cntl |= CURSOR_MODE_DISABLE;
|
|
}
|
|
I915_WRITE(CURCNTR(pipe), cntl);
|
|
|
|
intel_crtc->cursor_visible = visible;
|
|
}
|
|
/* and commit changes on next vblank */
|
|
I915_WRITE(CURBASE(pipe), base);
|
|
}
|
|
|
|
static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
bool visible = base != 0;
|
|
|
|
if (intel_crtc->cursor_visible != visible) {
|
|
uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
|
|
if (base) {
|
|
cntl &= ~CURSOR_MODE;
|
|
cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
|
|
} else {
|
|
cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
|
|
cntl |= CURSOR_MODE_DISABLE;
|
|
}
|
|
I915_WRITE(CURCNTR_IVB(pipe), cntl);
|
|
|
|
intel_crtc->cursor_visible = visible;
|
|
}
|
|
/* and commit changes on next vblank */
|
|
I915_WRITE(CURBASE_IVB(pipe), base);
|
|
}
|
|
|
|
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
|
|
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
|
|
bool on)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int x = intel_crtc->cursor_x;
|
|
int y = intel_crtc->cursor_y;
|
|
u32 base, pos;
|
|
bool visible;
|
|
|
|
pos = 0;
|
|
|
|
if (on && crtc->enabled && crtc->fb) {
|
|
base = intel_crtc->cursor_addr;
|
|
if (x > (int) crtc->fb->width)
|
|
base = 0;
|
|
|
|
if (y > (int) crtc->fb->height)
|
|
base = 0;
|
|
} else
|
|
base = 0;
|
|
|
|
if (x < 0) {
|
|
if (x + intel_crtc->cursor_width < 0)
|
|
base = 0;
|
|
|
|
pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
|
|
x = -x;
|
|
}
|
|
pos |= x << CURSOR_X_SHIFT;
|
|
|
|
if (y < 0) {
|
|
if (y + intel_crtc->cursor_height < 0)
|
|
base = 0;
|
|
|
|
pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
|
|
y = -y;
|
|
}
|
|
pos |= y << CURSOR_Y_SHIFT;
|
|
|
|
visible = base != 0;
|
|
if (!visible && !intel_crtc->cursor_visible)
|
|
return;
|
|
|
|
if (IS_IVYBRIDGE(dev)) {
|
|
I915_WRITE(CURPOS_IVB(pipe), pos);
|
|
ivb_update_cursor(crtc, base);
|
|
} else {
|
|
I915_WRITE(CURPOS(pipe), pos);
|
|
if (IS_845G(dev) || IS_I865G(dev))
|
|
i845_update_cursor(crtc, base);
|
|
else
|
|
i9xx_update_cursor(crtc, base);
|
|
}
|
|
|
|
if (visible)
|
|
intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
|
|
}
|
|
|
|
static int intel_crtc_cursor_set(struct drm_crtc *crtc,
|
|
struct drm_file *file,
|
|
uint32_t handle,
|
|
uint32_t width, uint32_t height)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_i915_gem_object *obj;
|
|
uint32_t addr;
|
|
int ret;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
/* if we want to turn off the cursor ignore width and height */
|
|
if (!handle) {
|
|
DRM_DEBUG_KMS("cursor off\n");
|
|
addr = 0;
|
|
obj = NULL;
|
|
mutex_lock(&dev->struct_mutex);
|
|
goto finish;
|
|
}
|
|
|
|
/* Currently we only support 64x64 cursors */
|
|
if (width != 64 || height != 64) {
|
|
DRM_ERROR("we currently only support 64x64 cursors\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
|
|
if (&obj->base == NULL)
|
|
return -ENOENT;
|
|
|
|
if (obj->base.size < width * height * 4) {
|
|
DRM_ERROR("buffer is to small\n");
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/* we only need to pin inside GTT if cursor is non-phy */
|
|
mutex_lock(&dev->struct_mutex);
|
|
if (!dev_priv->info->cursor_needs_physical) {
|
|
if (obj->tiling_mode) {
|
|
DRM_ERROR("cursor cannot be tiled\n");
|
|
ret = -EINVAL;
|
|
goto fail_locked;
|
|
}
|
|
|
|
ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
|
|
if (ret) {
|
|
DRM_ERROR("failed to move cursor bo into the GTT\n");
|
|
goto fail_locked;
|
|
}
|
|
|
|
ret = i915_gem_object_put_fence(obj);
|
|
if (ret) {
|
|
DRM_ERROR("failed to release fence for cursor");
|
|
goto fail_unpin;
|
|
}
|
|
|
|
addr = obj->gtt_offset;
|
|
} else {
|
|
int align = IS_I830(dev) ? 16 * 1024 : 256;
|
|
ret = i915_gem_attach_phys_object(dev, obj,
|
|
(intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
|
|
align);
|
|
if (ret) {
|
|
DRM_ERROR("failed to attach phys object\n");
|
|
goto fail_locked;
|
|
}
|
|
addr = obj->phys_obj->handle->busaddr;
|
|
}
|
|
|
|
if (IS_GEN2(dev))
|
|
I915_WRITE(CURSIZE, (height << 12) | width);
|
|
|
|
finish:
|
|
if (intel_crtc->cursor_bo) {
|
|
if (dev_priv->info->cursor_needs_physical) {
|
|
if (intel_crtc->cursor_bo != obj)
|
|
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
|
|
} else
|
|
i915_gem_object_unpin(intel_crtc->cursor_bo);
|
|
drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
|
|
}
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_crtc->cursor_addr = addr;
|
|
intel_crtc->cursor_bo = obj;
|
|
intel_crtc->cursor_width = width;
|
|
intel_crtc->cursor_height = height;
|
|
|
|
intel_crtc_update_cursor(crtc, true);
|
|
|
|
return 0;
|
|
fail_unpin:
|
|
i915_gem_object_unpin(obj);
|
|
fail_locked:
|
|
mutex_unlock(&dev->struct_mutex);
|
|
fail:
|
|
drm_gem_object_unreference_unlocked(&obj->base);
|
|
return ret;
|
|
}
|
|
|
|
static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
intel_crtc->cursor_x = x;
|
|
intel_crtc->cursor_y = y;
|
|
|
|
intel_crtc_update_cursor(crtc, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/** Sets the color ramps on behalf of RandR */
|
|
void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
|
|
u16 blue, int regno)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
intel_crtc->lut_r[regno] = red >> 8;
|
|
intel_crtc->lut_g[regno] = green >> 8;
|
|
intel_crtc->lut_b[regno] = blue >> 8;
|
|
}
|
|
|
|
void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
|
|
u16 *blue, int regno)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
*red = intel_crtc->lut_r[regno] << 8;
|
|
*green = intel_crtc->lut_g[regno] << 8;
|
|
*blue = intel_crtc->lut_b[regno] << 8;
|
|
}
|
|
|
|
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
|
|
u16 *blue, uint32_t start, uint32_t size)
|
|
{
|
|
int end = (start + size > 256) ? 256 : start + size, i;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
for (i = start; i < end; i++) {
|
|
intel_crtc->lut_r[i] = red[i] >> 8;
|
|
intel_crtc->lut_g[i] = green[i] >> 8;
|
|
intel_crtc->lut_b[i] = blue[i] >> 8;
|
|
}
|
|
|
|
intel_crtc_load_lut(crtc);
|
|
}
|
|
|
|
/**
|
|
* Get a pipe with a simple mode set on it for doing load-based monitor
|
|
* detection.
|
|
*
|
|
* It will be up to the load-detect code to adjust the pipe as appropriate for
|
|
* its requirements. The pipe will be connected to no other encoders.
|
|
*
|
|
* Currently this code will only succeed if there is a pipe with no encoders
|
|
* configured for it. In the future, it could choose to temporarily disable
|
|
* some outputs to free up a pipe for its use.
|
|
*
|
|
* \return crtc, or NULL if no pipes are available.
|
|
*/
|
|
|
|
/* VESA 640x480x72Hz mode to set on the pipe */
|
|
static struct drm_display_mode load_detect_mode = {
|
|
DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
|
|
704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
|
|
};
|
|
|
|
static struct drm_framebuffer *
|
|
intel_framebuffer_create(struct drm_device *dev,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct intel_framebuffer *intel_fb;
|
|
int ret;
|
|
|
|
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
|
|
if (!intel_fb) {
|
|
drm_gem_object_unreference_unlocked(&obj->base);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
|
|
if (ret) {
|
|
drm_gem_object_unreference_unlocked(&obj->base);
|
|
kfree(intel_fb);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return &intel_fb->base;
|
|
}
|
|
|
|
static u32
|
|
intel_framebuffer_pitch_for_width(int width, int bpp)
|
|
{
|
|
u32 pitch = DIV_ROUND_UP(width * bpp, 8);
|
|
return ALIGN(pitch, 64);
|
|
}
|
|
|
|
static u32
|
|
intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
|
|
{
|
|
u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
|
|
return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
intel_framebuffer_create_for_mode(struct drm_device *dev,
|
|
struct drm_display_mode *mode,
|
|
int depth, int bpp)
|
|
{
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_mode_fb_cmd2 mode_cmd;
|
|
|
|
obj = i915_gem_alloc_object(dev,
|
|
intel_framebuffer_size_for_mode(mode, bpp));
|
|
if (obj == NULL)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
mode_cmd.width = mode->hdisplay;
|
|
mode_cmd.height = mode->vdisplay;
|
|
mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
|
|
bpp);
|
|
mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
|
|
|
|
return intel_framebuffer_create(dev, &mode_cmd, obj);
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
mode_fits_in_fbdev(struct drm_device *dev,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_framebuffer *fb;
|
|
|
|
if (dev_priv->fbdev == NULL)
|
|
return NULL;
|
|
|
|
obj = dev_priv->fbdev->ifb.obj;
|
|
if (obj == NULL)
|
|
return NULL;
|
|
|
|
fb = &dev_priv->fbdev->ifb.base;
|
|
if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
|
|
fb->bits_per_pixel))
|
|
return NULL;
|
|
|
|
if (obj->base.size < mode->vdisplay * fb->pitches[0])
|
|
return NULL;
|
|
|
|
return fb;
|
|
}
|
|
|
|
bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
|
|
struct drm_connector *connector,
|
|
struct drm_display_mode *mode,
|
|
struct intel_load_detect_pipe *old)
|
|
{
|
|
struct intel_crtc *intel_crtc;
|
|
struct drm_crtc *possible_crtc;
|
|
struct drm_encoder *encoder = &intel_encoder->base;
|
|
struct drm_crtc *crtc = NULL;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_framebuffer *old_fb;
|
|
int i = -1;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
|
|
connector->base.id, drm_get_connector_name(connector),
|
|
encoder->base.id, drm_get_encoder_name(encoder));
|
|
|
|
/*
|
|
* Algorithm gets a little messy:
|
|
*
|
|
* - if the connector already has an assigned crtc, use it (but make
|
|
* sure it's on first)
|
|
*
|
|
* - try to find the first unused crtc that can drive this connector,
|
|
* and use that if we find one
|
|
*/
|
|
|
|
/* See if we already have a CRTC for this connector */
|
|
if (encoder->crtc) {
|
|
crtc = encoder->crtc;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
old->dpms_mode = intel_crtc->dpms_mode;
|
|
old->load_detect_temp = false;
|
|
|
|
/* Make sure the crtc and connector are running */
|
|
if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
|
|
struct drm_encoder_helper_funcs *encoder_funcs;
|
|
struct drm_crtc_helper_funcs *crtc_funcs;
|
|
|
|
crtc_funcs = crtc->helper_private;
|
|
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
|
|
|
|
encoder_funcs = encoder->helper_private;
|
|
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Find an unused one (if possible) */
|
|
list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
|
|
i++;
|
|
if (!(encoder->possible_crtcs & (1 << i)))
|
|
continue;
|
|
if (!possible_crtc->enabled) {
|
|
crtc = possible_crtc;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we didn't find an unused CRTC, don't use any.
|
|
*/
|
|
if (!crtc) {
|
|
DRM_DEBUG_KMS("no pipe available for load-detect\n");
|
|
return false;
|
|
}
|
|
|
|
encoder->crtc = crtc;
|
|
connector->encoder = encoder;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
old->dpms_mode = intel_crtc->dpms_mode;
|
|
old->load_detect_temp = true;
|
|
old->release_fb = NULL;
|
|
|
|
if (!mode)
|
|
mode = &load_detect_mode;
|
|
|
|
old_fb = crtc->fb;
|
|
|
|
/* We need a framebuffer large enough to accommodate all accesses
|
|
* that the plane may generate whilst we perform load detection.
|
|
* We can not rely on the fbcon either being present (we get called
|
|
* during its initialisation to detect all boot displays, or it may
|
|
* not even exist) or that it is large enough to satisfy the
|
|
* requested mode.
|
|
*/
|
|
crtc->fb = mode_fits_in_fbdev(dev, mode);
|
|
if (crtc->fb == NULL) {
|
|
DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
|
|
crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
|
|
old->release_fb = crtc->fb;
|
|
} else
|
|
DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
|
|
if (IS_ERR(crtc->fb)) {
|
|
DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
|
|
crtc->fb = old_fb;
|
|
return false;
|
|
}
|
|
|
|
if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
|
|
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
|
|
if (old->release_fb)
|
|
old->release_fb->funcs->destroy(old->release_fb);
|
|
crtc->fb = old_fb;
|
|
return false;
|
|
}
|
|
|
|
/* let the connector get through one full cycle before testing */
|
|
intel_wait_for_vblank(dev, intel_crtc->pipe);
|
|
|
|
return true;
|
|
}
|
|
|
|
void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
|
|
struct drm_connector *connector,
|
|
struct intel_load_detect_pipe *old)
|
|
{
|
|
struct drm_encoder *encoder = &intel_encoder->base;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_crtc *crtc = encoder->crtc;
|
|
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
|
|
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
|
|
connector->base.id, drm_get_connector_name(connector),
|
|
encoder->base.id, drm_get_encoder_name(encoder));
|
|
|
|
if (old->load_detect_temp) {
|
|
connector->encoder = NULL;
|
|
drm_helper_disable_unused_functions(dev);
|
|
|
|
if (old->release_fb)
|
|
old->release_fb->funcs->destroy(old->release_fb);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Switch crtc and encoder back off if necessary */
|
|
if (old->dpms_mode != DRM_MODE_DPMS_ON) {
|
|
encoder_funcs->dpms(encoder, old->dpms_mode);
|
|
crtc_funcs->dpms(crtc, old->dpms_mode);
|
|
}
|
|
}
|
|
|
|
/* Returns the clock of the currently programmed mode of the given pipe. */
|
|
static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 dpll = I915_READ(DPLL(pipe));
|
|
u32 fp;
|
|
intel_clock_t clock;
|
|
|
|
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
|
|
fp = I915_READ(FP0(pipe));
|
|
else
|
|
fp = I915_READ(FP1(pipe));
|
|
|
|
clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
|
|
if (IS_PINEVIEW(dev)) {
|
|
clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
|
|
clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
|
|
} else {
|
|
clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
|
|
clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
|
|
}
|
|
|
|
if (!IS_GEN2(dev)) {
|
|
if (IS_PINEVIEW(dev))
|
|
clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
|
|
else
|
|
clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT);
|
|
|
|
switch (dpll & DPLL_MODE_MASK) {
|
|
case DPLLB_MODE_DAC_SERIAL:
|
|
clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
|
|
5 : 10;
|
|
break;
|
|
case DPLLB_MODE_LVDS:
|
|
clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
|
|
7 : 14;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
|
|
"mode\n", (int)(dpll & DPLL_MODE_MASK));
|
|
return 0;
|
|
}
|
|
|
|
/* XXX: Handle the 100Mhz refclk */
|
|
intel_clock(dev, 96000, &clock);
|
|
} else {
|
|
bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
|
|
|
|
if (is_lvds) {
|
|
clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT);
|
|
clock.p2 = 14;
|
|
|
|
if ((dpll & PLL_REF_INPUT_MASK) ==
|
|
PLLB_REF_INPUT_SPREADSPECTRUMIN) {
|
|
/* XXX: might not be 66MHz */
|
|
intel_clock(dev, 66000, &clock);
|
|
} else
|
|
intel_clock(dev, 48000, &clock);
|
|
} else {
|
|
if (dpll & PLL_P1_DIVIDE_BY_TWO)
|
|
clock.p1 = 2;
|
|
else {
|
|
clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
|
|
}
|
|
if (dpll & PLL_P2_DIVIDE_BY_4)
|
|
clock.p2 = 4;
|
|
else
|
|
clock.p2 = 2;
|
|
|
|
intel_clock(dev, 48000, &clock);
|
|
}
|
|
}
|
|
|
|
/* XXX: It would be nice to validate the clocks, but we can't reuse
|
|
* i830PllIsValid() because it relies on the xf86_config connector
|
|
* configuration being accurate, which it isn't necessarily.
|
|
*/
|
|
|
|
return clock.dot;
|
|
}
|
|
|
|
/** Returns the currently programmed mode of the given pipe. */
|
|
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
struct drm_display_mode *mode;
|
|
int htot = I915_READ(HTOTAL(pipe));
|
|
int hsync = I915_READ(HSYNC(pipe));
|
|
int vtot = I915_READ(VTOTAL(pipe));
|
|
int vsync = I915_READ(VSYNC(pipe));
|
|
|
|
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
|
|
if (!mode)
|
|
return NULL;
|
|
|
|
mode->clock = intel_crtc_clock_get(dev, crtc);
|
|
mode->hdisplay = (htot & 0xffff) + 1;
|
|
mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
|
|
mode->hsync_start = (hsync & 0xffff) + 1;
|
|
mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
|
|
mode->vdisplay = (vtot & 0xffff) + 1;
|
|
mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
|
|
mode->vsync_start = (vsync & 0xffff) + 1;
|
|
mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
|
|
|
|
drm_mode_set_name(mode);
|
|
drm_mode_set_crtcinfo(mode, 0);
|
|
|
|
return mode;
|
|
}
|
|
|
|
#define GPU_IDLE_TIMEOUT 500 /* ms */
|
|
|
|
/* When this timer fires, we've been idle for awhile */
|
|
static void intel_gpu_idle_timer(unsigned long arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *)arg;
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
|
|
if (!list_empty(&dev_priv->mm.active_list)) {
|
|
/* Still processing requests, so just re-arm the timer. */
|
|
mod_timer(&dev_priv->idle_timer, jiffies +
|
|
msecs_to_jiffies(GPU_IDLE_TIMEOUT));
|
|
return;
|
|
}
|
|
|
|
dev_priv->busy = false;
|
|
queue_work(dev_priv->wq, &dev_priv->idle_work);
|
|
}
|
|
|
|
#define CRTC_IDLE_TIMEOUT 1000 /* ms */
|
|
|
|
static void intel_crtc_idle_timer(unsigned long arg)
|
|
{
|
|
struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
|
|
struct drm_crtc *crtc = &intel_crtc->base;
|
|
drm_i915_private_t *dev_priv = crtc->dev->dev_private;
|
|
struct intel_framebuffer *intel_fb;
|
|
|
|
intel_fb = to_intel_framebuffer(crtc->fb);
|
|
if (intel_fb && intel_fb->obj->active) {
|
|
/* The framebuffer is still being accessed by the GPU. */
|
|
mod_timer(&intel_crtc->idle_timer, jiffies +
|
|
msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
|
|
return;
|
|
}
|
|
|
|
intel_crtc->busy = false;
|
|
queue_work(dev_priv->wq, &dev_priv->idle_work);
|
|
}
|
|
|
|
static void intel_increase_pllclock(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int dpll_reg = DPLL(pipe);
|
|
int dpll;
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
return;
|
|
|
|
if (!dev_priv->lvds_downclock_avail)
|
|
return;
|
|
|
|
dpll = I915_READ(dpll_reg);
|
|
if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
|
|
DRM_DEBUG_DRIVER("upclocking LVDS\n");
|
|
|
|
assert_panel_unlocked(dev_priv, pipe);
|
|
|
|
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
|
|
I915_WRITE(dpll_reg, dpll);
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
dpll = I915_READ(dpll_reg);
|
|
if (dpll & DISPLAY_RATE_SELECT_FPA1)
|
|
DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
|
|
}
|
|
|
|
/* Schedule downclock */
|
|
mod_timer(&intel_crtc->idle_timer, jiffies +
|
|
msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
|
|
}
|
|
|
|
static void intel_decrease_pllclock(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
int dpll_reg = DPLL(pipe);
|
|
int dpll = I915_READ(dpll_reg);
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
return;
|
|
|
|
if (!dev_priv->lvds_downclock_avail)
|
|
return;
|
|
|
|
/*
|
|
* Since this is called by a timer, we should never get here in
|
|
* the manual case.
|
|
*/
|
|
if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
|
|
DRM_DEBUG_DRIVER("downclocking LVDS\n");
|
|
|
|
assert_panel_unlocked(dev_priv, pipe);
|
|
|
|
dpll |= DISPLAY_RATE_SELECT_FPA1;
|
|
I915_WRITE(dpll_reg, dpll);
|
|
intel_wait_for_vblank(dev, pipe);
|
|
dpll = I915_READ(dpll_reg);
|
|
if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
|
|
DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* intel_idle_update - adjust clocks for idleness
|
|
* @work: work struct
|
|
*
|
|
* Either the GPU or display (or both) went idle. Check the busy status
|
|
* here and adjust the CRTC and GPU clocks as necessary.
|
|
*/
|
|
static void intel_idle_update(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
idle_work);
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct drm_crtc *crtc;
|
|
struct intel_crtc *intel_crtc;
|
|
|
|
if (!i915_powersave)
|
|
return;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
i915_update_gfx_val(dev_priv);
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
/* Skip inactive CRTCs */
|
|
if (!crtc->fb)
|
|
continue;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
if (!intel_crtc->busy)
|
|
intel_decrease_pllclock(crtc);
|
|
}
|
|
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
/**
|
|
* intel_mark_busy - mark the GPU and possibly the display busy
|
|
* @dev: drm device
|
|
* @obj: object we're operating on
|
|
*
|
|
* Callers can use this function to indicate that the GPU is busy processing
|
|
* commands. If @obj matches one of the CRTC objects (i.e. it's a scanout
|
|
* buffer), we'll also mark the display as busy, so we know to increase its
|
|
* clock frequency.
|
|
*/
|
|
void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = NULL;
|
|
struct intel_framebuffer *intel_fb;
|
|
struct intel_crtc *intel_crtc;
|
|
|
|
if (!drm_core_check_feature(dev, DRIVER_MODESET))
|
|
return;
|
|
|
|
if (!dev_priv->busy)
|
|
dev_priv->busy = true;
|
|
else
|
|
mod_timer(&dev_priv->idle_timer, jiffies +
|
|
msecs_to_jiffies(GPU_IDLE_TIMEOUT));
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
if (!crtc->fb)
|
|
continue;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
intel_fb = to_intel_framebuffer(crtc->fb);
|
|
if (intel_fb->obj == obj) {
|
|
if (!intel_crtc->busy) {
|
|
/* Non-busy -> busy, upclock */
|
|
intel_increase_pllclock(crtc);
|
|
intel_crtc->busy = true;
|
|
} else {
|
|
/* Busy -> busy, put off timer */
|
|
mod_timer(&intel_crtc->idle_timer, jiffies +
|
|
msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void intel_crtc_destroy(struct drm_crtc *crtc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_unpin_work *work;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
work = intel_crtc->unpin_work;
|
|
intel_crtc->unpin_work = NULL;
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
if (work) {
|
|
cancel_work_sync(&work->work);
|
|
kfree(work);
|
|
}
|
|
|
|
drm_crtc_cleanup(crtc);
|
|
|
|
kfree(intel_crtc);
|
|
}
|
|
|
|
static void intel_unpin_work_fn(struct work_struct *__work)
|
|
{
|
|
struct intel_unpin_work *work =
|
|
container_of(__work, struct intel_unpin_work, work);
|
|
|
|
mutex_lock(&work->dev->struct_mutex);
|
|
intel_unpin_fb_obj(work->old_fb_obj);
|
|
drm_gem_object_unreference(&work->pending_flip_obj->base);
|
|
drm_gem_object_unreference(&work->old_fb_obj->base);
|
|
|
|
intel_update_fbc(work->dev);
|
|
mutex_unlock(&work->dev->struct_mutex);
|
|
kfree(work);
|
|
}
|
|
|
|
static void do_intel_finish_page_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_unpin_work *work;
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_pending_vblank_event *e;
|
|
struct timeval tnow, tvbl;
|
|
unsigned long flags;
|
|
|
|
/* Ignore early vblank irqs */
|
|
if (intel_crtc == NULL)
|
|
return;
|
|
|
|
do_gettimeofday(&tnow);
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
work = intel_crtc->unpin_work;
|
|
if (work == NULL || !work->pending) {
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
return;
|
|
}
|
|
|
|
intel_crtc->unpin_work = NULL;
|
|
|
|
if (work->event) {
|
|
e = work->event;
|
|
e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
|
|
|
|
/* Called before vblank count and timestamps have
|
|
* been updated for the vblank interval of flip
|
|
* completion? Need to increment vblank count and
|
|
* add one videorefresh duration to returned timestamp
|
|
* to account for this. We assume this happened if we
|
|
* get called over 0.9 frame durations after the last
|
|
* timestamped vblank.
|
|
*
|
|
* This calculation can not be used with vrefresh rates
|
|
* below 5Hz (10Hz to be on the safe side) without
|
|
* promoting to 64 integers.
|
|
*/
|
|
if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
|
|
9 * crtc->framedur_ns) {
|
|
e->event.sequence++;
|
|
tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
|
|
crtc->framedur_ns);
|
|
}
|
|
|
|
e->event.tv_sec = tvbl.tv_sec;
|
|
e->event.tv_usec = tvbl.tv_usec;
|
|
|
|
list_add_tail(&e->base.link,
|
|
&e->base.file_priv->event_list);
|
|
wake_up_interruptible(&e->base.file_priv->event_wait);
|
|
}
|
|
|
|
drm_vblank_put(dev, intel_crtc->pipe);
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
obj = work->old_fb_obj;
|
|
|
|
atomic_clear_mask(1 << intel_crtc->plane,
|
|
&obj->pending_flip.counter);
|
|
if (atomic_read(&obj->pending_flip) == 0)
|
|
wake_up(&dev_priv->pending_flip_queue);
|
|
|
|
schedule_work(&work->work);
|
|
|
|
trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
|
|
}
|
|
|
|
void intel_finish_page_flip(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
|
|
do_intel_finish_page_flip(dev, crtc);
|
|
}
|
|
|
|
void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
|
|
|
|
do_intel_finish_page_flip(dev, crtc);
|
|
}
|
|
|
|
void intel_prepare_page_flip(struct drm_device *dev, int plane)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc =
|
|
to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
if (intel_crtc->unpin_work) {
|
|
if ((++intel_crtc->unpin_work->pending) > 1)
|
|
DRM_ERROR("Prepared flip multiple times\n");
|
|
} else {
|
|
DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
|
|
}
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
static int intel_gen2_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
unsigned long offset;
|
|
u32 flip_mask;
|
|
int ret;
|
|
|
|
ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Offset into the new buffer for cases of shared fbs between CRTCs */
|
|
offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
|
|
|
|
ret = BEGIN_LP_RING(6);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Can't queue multiple flips, so wait for the previous
|
|
* one to finish before executing the next.
|
|
*/
|
|
if (intel_crtc->plane)
|
|
flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
|
|
else
|
|
flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
|
|
OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
|
|
OUT_RING(MI_NOOP);
|
|
OUT_RING(MI_DISPLAY_FLIP |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
OUT_RING(fb->pitches[0]);
|
|
OUT_RING(obj->gtt_offset + offset);
|
|
OUT_RING(0); /* aux display base address, unused */
|
|
ADVANCE_LP_RING();
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int intel_gen3_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
unsigned long offset;
|
|
u32 flip_mask;
|
|
int ret;
|
|
|
|
ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Offset into the new buffer for cases of shared fbs between CRTCs */
|
|
offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
|
|
|
|
ret = BEGIN_LP_RING(6);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (intel_crtc->plane)
|
|
flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
|
|
else
|
|
flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
|
|
OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
|
|
OUT_RING(MI_NOOP);
|
|
OUT_RING(MI_DISPLAY_FLIP_I915 |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
OUT_RING(fb->pitches[0]);
|
|
OUT_RING(obj->gtt_offset + offset);
|
|
OUT_RING(MI_NOOP);
|
|
|
|
ADVANCE_LP_RING();
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int intel_gen4_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t pf, pipesrc;
|
|
int ret;
|
|
|
|
ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = BEGIN_LP_RING(4);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* i965+ uses the linear or tiled offsets from the
|
|
* Display Registers (which do not change across a page-flip)
|
|
* so we need only reprogram the base address.
|
|
*/
|
|
OUT_RING(MI_DISPLAY_FLIP |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
OUT_RING(fb->pitches[0]);
|
|
OUT_RING(obj->gtt_offset | obj->tiling_mode);
|
|
|
|
/* XXX Enabling the panel-fitter across page-flip is so far
|
|
* untested on non-native modes, so ignore it for now.
|
|
* pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
|
|
*/
|
|
pf = 0;
|
|
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
|
|
OUT_RING(pf | pipesrc);
|
|
ADVANCE_LP_RING();
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int intel_gen6_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t pf, pipesrc;
|
|
int ret;
|
|
|
|
ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = BEGIN_LP_RING(4);
|
|
if (ret)
|
|
goto out;
|
|
|
|
OUT_RING(MI_DISPLAY_FLIP |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
OUT_RING(fb->pitches[0] | obj->tiling_mode);
|
|
OUT_RING(obj->gtt_offset);
|
|
|
|
pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
|
|
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
|
|
OUT_RING(pf | pipesrc);
|
|
ADVANCE_LP_RING();
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* On gen7 we currently use the blit ring because (in early silicon at least)
|
|
* the render ring doesn't give us interrpts for page flip completion, which
|
|
* means clients will hang after the first flip is queued. Fortunately the
|
|
* blit ring generates interrupts properly, so use it instead.
|
|
*/
|
|
static int intel_gen7_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
|
|
int ret;
|
|
|
|
ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = intel_ring_begin(ring, 4);
|
|
if (ret)
|
|
goto out;
|
|
|
|
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
|
|
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
|
|
intel_ring_emit(ring, (obj->gtt_offset));
|
|
intel_ring_emit(ring, (MI_NOOP));
|
|
intel_ring_advance(ring);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int intel_default_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int intel_crtc_page_flip(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_pending_vblank_event *event)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_framebuffer *intel_fb;
|
|
struct drm_i915_gem_object *obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_unpin_work *work;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
work = kzalloc(sizeof *work, GFP_KERNEL);
|
|
if (work == NULL)
|
|
return -ENOMEM;
|
|
|
|
work->event = event;
|
|
work->dev = crtc->dev;
|
|
intel_fb = to_intel_framebuffer(crtc->fb);
|
|
work->old_fb_obj = intel_fb->obj;
|
|
INIT_WORK(&work->work, intel_unpin_work_fn);
|
|
|
|
ret = drm_vblank_get(dev, intel_crtc->pipe);
|
|
if (ret)
|
|
goto free_work;
|
|
|
|
/* We borrow the event spin lock for protecting unpin_work */
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
if (intel_crtc->unpin_work) {
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
kfree(work);
|
|
drm_vblank_put(dev, intel_crtc->pipe);
|
|
|
|
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
|
|
return -EBUSY;
|
|
}
|
|
intel_crtc->unpin_work = work;
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
intel_fb = to_intel_framebuffer(fb);
|
|
obj = intel_fb->obj;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
/* Reference the objects for the scheduled work. */
|
|
drm_gem_object_reference(&work->old_fb_obj->base);
|
|
drm_gem_object_reference(&obj->base);
|
|
|
|
crtc->fb = fb;
|
|
|
|
work->pending_flip_obj = obj;
|
|
|
|
work->enable_stall_check = true;
|
|
|
|
/* Block clients from rendering to the new back buffer until
|
|
* the flip occurs and the object is no longer visible.
|
|
*/
|
|
atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
|
|
|
|
ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
|
|
if (ret)
|
|
goto cleanup_pending;
|
|
|
|
intel_disable_fbc(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
trace_i915_flip_request(intel_crtc->plane, obj);
|
|
|
|
return 0;
|
|
|
|
cleanup_pending:
|
|
atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
|
|
drm_gem_object_unreference(&work->old_fb_obj->base);
|
|
drm_gem_object_unreference(&obj->base);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
intel_crtc->unpin_work = NULL;
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
drm_vblank_put(dev, intel_crtc->pipe);
|
|
free_work:
|
|
kfree(work);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void intel_sanitize_modesetting(struct drm_device *dev,
|
|
int pipe, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 reg, val;
|
|
|
|
/* Clear any frame start delays used for debugging left by the BIOS */
|
|
for_each_pipe(pipe) {
|
|
reg = PIPECONF(pipe);
|
|
I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
|
|
}
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
return;
|
|
|
|
/* Who knows what state these registers were left in by the BIOS or
|
|
* grub?
|
|
*
|
|
* If we leave the registers in a conflicting state (e.g. with the
|
|
* display plane reading from the other pipe than the one we intend
|
|
* to use) then when we attempt to teardown the active mode, we will
|
|
* not disable the pipes and planes in the correct order -- leaving
|
|
* a plane reading from a disabled pipe and possibly leading to
|
|
* undefined behaviour.
|
|
*/
|
|
|
|
reg = DSPCNTR(plane);
|
|
val = I915_READ(reg);
|
|
|
|
if ((val & DISPLAY_PLANE_ENABLE) == 0)
|
|
return;
|
|
if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
|
|
return;
|
|
|
|
/* This display plane is active and attached to the other CPU pipe. */
|
|
pipe = !pipe;
|
|
|
|
/* Disable the plane and wait for it to stop reading from the pipe. */
|
|
intel_disable_plane(dev_priv, plane, pipe);
|
|
intel_disable_pipe(dev_priv, pipe);
|
|
}
|
|
|
|
static void intel_crtc_reset(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
/* Reset flags back to the 'unknown' status so that they
|
|
* will be correctly set on the initial modeset.
|
|
*/
|
|
intel_crtc->dpms_mode = -1;
|
|
|
|
/* We need to fix up any BIOS configuration that conflicts with
|
|
* our expectations.
|
|
*/
|
|
intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
|
|
}
|
|
|
|
static struct drm_crtc_helper_funcs intel_helper_funcs = {
|
|
.dpms = intel_crtc_dpms,
|
|
.mode_fixup = intel_crtc_mode_fixup,
|
|
.mode_set = intel_crtc_mode_set,
|
|
.mode_set_base = intel_pipe_set_base,
|
|
.mode_set_base_atomic = intel_pipe_set_base_atomic,
|
|
.load_lut = intel_crtc_load_lut,
|
|
.disable = intel_crtc_disable,
|
|
};
|
|
|
|
static const struct drm_crtc_funcs intel_crtc_funcs = {
|
|
.reset = intel_crtc_reset,
|
|
.cursor_set = intel_crtc_cursor_set,
|
|
.cursor_move = intel_crtc_cursor_move,
|
|
.gamma_set = intel_crtc_gamma_set,
|
|
.set_config = drm_crtc_helper_set_config,
|
|
.destroy = intel_crtc_destroy,
|
|
.page_flip = intel_crtc_page_flip,
|
|
};
|
|
|
|
static void intel_crtc_init(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc;
|
|
int i;
|
|
|
|
intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
|
|
if (intel_crtc == NULL)
|
|
return;
|
|
|
|
drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
|
|
|
|
drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
|
|
for (i = 0; i < 256; i++) {
|
|
intel_crtc->lut_r[i] = i;
|
|
intel_crtc->lut_g[i] = i;
|
|
intel_crtc->lut_b[i] = i;
|
|
}
|
|
|
|
/* Swap pipes & planes for FBC on pre-965 */
|
|
intel_crtc->pipe = pipe;
|
|
intel_crtc->plane = pipe;
|
|
if (IS_MOBILE(dev) && IS_GEN3(dev)) {
|
|
DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
|
|
intel_crtc->plane = !pipe;
|
|
}
|
|
|
|
BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
|
|
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
|
|
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
|
|
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
|
|
|
|
intel_crtc_reset(&intel_crtc->base);
|
|
intel_crtc->active = true; /* force the pipe off on setup_init_config */
|
|
intel_crtc->bpp = 24; /* default for pre-Ironlake */
|
|
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
if (pipe == 2 && IS_IVYBRIDGE(dev))
|
|
intel_crtc->no_pll = true;
|
|
intel_helper_funcs.prepare = ironlake_crtc_prepare;
|
|
intel_helper_funcs.commit = ironlake_crtc_commit;
|
|
} else {
|
|
intel_helper_funcs.prepare = i9xx_crtc_prepare;
|
|
intel_helper_funcs.commit = i9xx_crtc_commit;
|
|
}
|
|
|
|
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
|
|
|
|
intel_crtc->busy = false;
|
|
|
|
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
|
|
(unsigned long)intel_crtc);
|
|
}
|
|
|
|
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
|
|
struct drm_file *file)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
|
|
struct drm_mode_object *drmmode_obj;
|
|
struct intel_crtc *crtc;
|
|
|
|
if (!dev_priv) {
|
|
DRM_ERROR("called with no initialization\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
|
|
DRM_MODE_OBJECT_CRTC);
|
|
|
|
if (!drmmode_obj) {
|
|
DRM_ERROR("no such CRTC id\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
|
|
pipe_from_crtc_id->pipe = crtc->pipe;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_encoder_clones(struct drm_device *dev, int type_mask)
|
|
{
|
|
struct intel_encoder *encoder;
|
|
int index_mask = 0;
|
|
int entry = 0;
|
|
|
|
list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
|
|
if (type_mask & encoder->clone_mask)
|
|
index_mask |= (1 << entry);
|
|
entry++;
|
|
}
|
|
|
|
return index_mask;
|
|
}
|
|
|
|
static bool has_edp_a(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!IS_MOBILE(dev))
|
|
return false;
|
|
|
|
if ((I915_READ(DP_A) & DP_DETECTED) == 0)
|
|
return false;
|
|
|
|
if (IS_GEN5(dev) &&
|
|
(I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void intel_setup_outputs(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_encoder *encoder;
|
|
bool dpd_is_edp = false;
|
|
bool has_lvds;
|
|
|
|
has_lvds = intel_lvds_init(dev);
|
|
if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
|
|
/* disable the panel fitter on everything but LVDS */
|
|
I915_WRITE(PFIT_CONTROL, 0);
|
|
}
|
|
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
dpd_is_edp = intel_dpd_is_edp(dev);
|
|
|
|
if (has_edp_a(dev))
|
|
intel_dp_init(dev, DP_A);
|
|
|
|
if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
|
|
intel_dp_init(dev, PCH_DP_D);
|
|
}
|
|
|
|
intel_crt_init(dev);
|
|
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
int found;
|
|
|
|
if (I915_READ(HDMIB) & PORT_DETECTED) {
|
|
/* PCH SDVOB multiplex with HDMIB */
|
|
found = intel_sdvo_init(dev, PCH_SDVOB);
|
|
if (!found)
|
|
intel_hdmi_init(dev, HDMIB);
|
|
if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
|
|
intel_dp_init(dev, PCH_DP_B);
|
|
}
|
|
|
|
if (I915_READ(HDMIC) & PORT_DETECTED)
|
|
intel_hdmi_init(dev, HDMIC);
|
|
|
|
if (I915_READ(HDMID) & PORT_DETECTED)
|
|
intel_hdmi_init(dev, HDMID);
|
|
|
|
if (I915_READ(PCH_DP_C) & DP_DETECTED)
|
|
intel_dp_init(dev, PCH_DP_C);
|
|
|
|
if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
|
|
intel_dp_init(dev, PCH_DP_D);
|
|
|
|
} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
|
|
bool found = false;
|
|
|
|
if (I915_READ(SDVOB) & SDVO_DETECTED) {
|
|
DRM_DEBUG_KMS("probing SDVOB\n");
|
|
found = intel_sdvo_init(dev, SDVOB);
|
|
if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
|
|
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
|
|
intel_hdmi_init(dev, SDVOB);
|
|
}
|
|
|
|
if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
|
|
DRM_DEBUG_KMS("probing DP_B\n");
|
|
intel_dp_init(dev, DP_B);
|
|
}
|
|
}
|
|
|
|
/* Before G4X SDVOC doesn't have its own detect register */
|
|
|
|
if (I915_READ(SDVOB) & SDVO_DETECTED) {
|
|
DRM_DEBUG_KMS("probing SDVOC\n");
|
|
found = intel_sdvo_init(dev, SDVOC);
|
|
}
|
|
|
|
if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
|
|
|
|
if (SUPPORTS_INTEGRATED_HDMI(dev)) {
|
|
DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
|
|
intel_hdmi_init(dev, SDVOC);
|
|
}
|
|
if (SUPPORTS_INTEGRATED_DP(dev)) {
|
|
DRM_DEBUG_KMS("probing DP_C\n");
|
|
intel_dp_init(dev, DP_C);
|
|
}
|
|
}
|
|
|
|
if (SUPPORTS_INTEGRATED_DP(dev) &&
|
|
(I915_READ(DP_D) & DP_DETECTED)) {
|
|
DRM_DEBUG_KMS("probing DP_D\n");
|
|
intel_dp_init(dev, DP_D);
|
|
}
|
|
} else if (IS_GEN2(dev))
|
|
intel_dvo_init(dev);
|
|
|
|
if (SUPPORTS_TV(dev))
|
|
intel_tv_init(dev);
|
|
|
|
list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
|
|
encoder->base.possible_crtcs = encoder->crtc_mask;
|
|
encoder->base.possible_clones =
|
|
intel_encoder_clones(dev, encoder->clone_mask);
|
|
}
|
|
|
|
/* disable all the possible outputs/crtcs before entering KMS mode */
|
|
drm_helper_disable_unused_functions(dev);
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
ironlake_init_pch_refclk(dev);
|
|
}
|
|
|
|
static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
|
|
{
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
|
|
drm_framebuffer_cleanup(fb);
|
|
drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
|
|
|
|
kfree(intel_fb);
|
|
}
|
|
|
|
static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
|
|
struct drm_file *file,
|
|
unsigned int *handle)
|
|
{
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
|
|
return drm_gem_handle_create(file, &obj->base, handle);
|
|
}
|
|
|
|
static const struct drm_framebuffer_funcs intel_fb_funcs = {
|
|
.destroy = intel_user_framebuffer_destroy,
|
|
.create_handle = intel_user_framebuffer_create_handle,
|
|
};
|
|
|
|
int intel_framebuffer_init(struct drm_device *dev,
|
|
struct intel_framebuffer *intel_fb,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
int ret;
|
|
|
|
if (obj->tiling_mode == I915_TILING_Y)
|
|
return -EINVAL;
|
|
|
|
if (mode_cmd->pitches[0] & 63)
|
|
return -EINVAL;
|
|
|
|
switch (mode_cmd->pixel_format) {
|
|
case DRM_FORMAT_RGB332:
|
|
case DRM_FORMAT_RGB565:
|
|
case DRM_FORMAT_XRGB8888:
|
|
case DRM_FORMAT_XBGR8888:
|
|
case DRM_FORMAT_ARGB8888:
|
|
case DRM_FORMAT_XRGB2101010:
|
|
case DRM_FORMAT_ARGB2101010:
|
|
/* RGB formats are common across chipsets */
|
|
break;
|
|
case DRM_FORMAT_YUYV:
|
|
case DRM_FORMAT_UYVY:
|
|
case DRM_FORMAT_YVYU:
|
|
case DRM_FORMAT_VYUY:
|
|
break;
|
|
default:
|
|
DRM_DEBUG_KMS("unsupported pixel format %u\n",
|
|
mode_cmd->pixel_format);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
|
|
if (ret) {
|
|
DRM_ERROR("framebuffer init failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
|
|
intel_fb->obj = obj;
|
|
return 0;
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
intel_user_framebuffer_create(struct drm_device *dev,
|
|
struct drm_file *filp,
|
|
struct drm_mode_fb_cmd2 *mode_cmd)
|
|
{
|
|
struct drm_i915_gem_object *obj;
|
|
|
|
obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
|
|
mode_cmd->handles[0]));
|
|
if (&obj->base == NULL)
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
return intel_framebuffer_create(dev, mode_cmd, obj);
|
|
}
|
|
|
|
static const struct drm_mode_config_funcs intel_mode_funcs = {
|
|
.fb_create = intel_user_framebuffer_create,
|
|
.output_poll_changed = intel_fb_output_poll_changed,
|
|
};
|
|
|
|
static struct drm_i915_gem_object *
|
|
intel_alloc_context_page(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_gem_object *ctx;
|
|
int ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev->struct_mutex));
|
|
|
|
ctx = i915_gem_alloc_object(dev, 4096);
|
|
if (!ctx) {
|
|
DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
|
|
return NULL;
|
|
}
|
|
|
|
ret = i915_gem_object_pin(ctx, 4096, true);
|
|
if (ret) {
|
|
DRM_ERROR("failed to pin power context: %d\n", ret);
|
|
goto err_unref;
|
|
}
|
|
|
|
ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
|
|
if (ret) {
|
|
DRM_ERROR("failed to set-domain on power context: %d\n", ret);
|
|
goto err_unpin;
|
|
}
|
|
|
|
return ctx;
|
|
|
|
err_unpin:
|
|
i915_gem_object_unpin(ctx);
|
|
err_unref:
|
|
drm_gem_object_unreference(&ctx->base);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return NULL;
|
|
}
|
|
|
|
bool ironlake_set_drps(struct drm_device *dev, u8 val)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u16 rgvswctl;
|
|
|
|
rgvswctl = I915_READ16(MEMSWCTL);
|
|
if (rgvswctl & MEMCTL_CMD_STS) {
|
|
DRM_DEBUG("gpu busy, RCS change rejected\n");
|
|
return false; /* still busy with another command */
|
|
}
|
|
|
|
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
|
|
(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
|
|
I915_WRITE16(MEMSWCTL, rgvswctl);
|
|
POSTING_READ16(MEMSWCTL);
|
|
|
|
rgvswctl |= MEMCTL_CMD_STS;
|
|
I915_WRITE16(MEMSWCTL, rgvswctl);
|
|
|
|
return true;
|
|
}
|
|
|
|
void ironlake_enable_drps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 rgvmodectl = I915_READ(MEMMODECTL);
|
|
u8 fmax, fmin, fstart, vstart;
|
|
|
|
/* Enable temp reporting */
|
|
I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
|
|
I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
|
|
|
|
/* 100ms RC evaluation intervals */
|
|
I915_WRITE(RCUPEI, 100000);
|
|
I915_WRITE(RCDNEI, 100000);
|
|
|
|
/* Set max/min thresholds to 90ms and 80ms respectively */
|
|
I915_WRITE(RCBMAXAVG, 90000);
|
|
I915_WRITE(RCBMINAVG, 80000);
|
|
|
|
I915_WRITE(MEMIHYST, 1);
|
|
|
|
/* Set up min, max, and cur for interrupt handling */
|
|
fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
|
|
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
|
|
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
|
|
MEMMODE_FSTART_SHIFT;
|
|
|
|
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
|
|
PXVFREQ_PX_SHIFT;
|
|
|
|
dev_priv->fmax = fmax; /* IPS callback will increase this */
|
|
dev_priv->fstart = fstart;
|
|
|
|
dev_priv->max_delay = fstart;
|
|
dev_priv->min_delay = fmin;
|
|
dev_priv->cur_delay = fstart;
|
|
|
|
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
|
|
fmax, fmin, fstart);
|
|
|
|
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
|
|
|
|
/*
|
|
* Interrupts will be enabled in ironlake_irq_postinstall
|
|
*/
|
|
|
|
I915_WRITE(VIDSTART, vstart);
|
|
POSTING_READ(VIDSTART);
|
|
|
|
rgvmodectl |= MEMMODE_SWMODE_EN;
|
|
I915_WRITE(MEMMODECTL, rgvmodectl);
|
|
|
|
if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
|
|
DRM_ERROR("stuck trying to change perf mode\n");
|
|
msleep(1);
|
|
|
|
ironlake_set_drps(dev, fstart);
|
|
|
|
dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
|
|
I915_READ(0x112e0);
|
|
dev_priv->last_time1 = jiffies_to_msecs(jiffies);
|
|
dev_priv->last_count2 = I915_READ(0x112f4);
|
|
getrawmonotonic(&dev_priv->last_time2);
|
|
}
|
|
|
|
void ironlake_disable_drps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u16 rgvswctl = I915_READ16(MEMSWCTL);
|
|
|
|
/* Ack interrupts, disable EFC interrupt */
|
|
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
|
|
I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
|
|
I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
|
|
I915_WRITE(DEIIR, DE_PCU_EVENT);
|
|
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
|
|
|
|
/* Go back to the starting frequency */
|
|
ironlake_set_drps(dev, dev_priv->fstart);
|
|
msleep(1);
|
|
rgvswctl |= MEMCTL_CMD_STS;
|
|
I915_WRITE(MEMSWCTL, rgvswctl);
|
|
msleep(1);
|
|
|
|
}
|
|
|
|
void gen6_set_rps(struct drm_device *dev, u8 val)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 swreq;
|
|
|
|
swreq = (val & 0x3ff) << 25;
|
|
I915_WRITE(GEN6_RPNSWREQ, swreq);
|
|
}
|
|
|
|
void gen6_disable_rps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
|
|
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
|
|
I915_WRITE(GEN6_PMIER, 0);
|
|
/* Complete PM interrupt masking here doesn't race with the rps work
|
|
* item again unmasking PM interrupts because that is using a different
|
|
* register (PMIMR) to mask PM interrupts. The only risk is in leaving
|
|
* stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
|
|
|
|
spin_lock_irq(&dev_priv->rps_lock);
|
|
dev_priv->pm_iir = 0;
|
|
spin_unlock_irq(&dev_priv->rps_lock);
|
|
|
|
I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
|
|
}
|
|
|
|
static unsigned long intel_pxfreq(u32 vidfreq)
|
|
{
|
|
unsigned long freq;
|
|
int div = (vidfreq & 0x3f0000) >> 16;
|
|
int post = (vidfreq & 0x3000) >> 12;
|
|
int pre = (vidfreq & 0x7);
|
|
|
|
if (!pre)
|
|
return 0;
|
|
|
|
freq = ((div * 133333) / ((1<<post) * pre));
|
|
|
|
return freq;
|
|
}
|
|
|
|
void intel_init_emon(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 lcfuse;
|
|
u8 pxw[16];
|
|
int i;
|
|
|
|
/* Disable to program */
|
|
I915_WRITE(ECR, 0);
|
|
POSTING_READ(ECR);
|
|
|
|
/* Program energy weights for various events */
|
|
I915_WRITE(SDEW, 0x15040d00);
|
|
I915_WRITE(CSIEW0, 0x007f0000);
|
|
I915_WRITE(CSIEW1, 0x1e220004);
|
|
I915_WRITE(CSIEW2, 0x04000004);
|
|
|
|
for (i = 0; i < 5; i++)
|
|
I915_WRITE(PEW + (i * 4), 0);
|
|
for (i = 0; i < 3; i++)
|
|
I915_WRITE(DEW + (i * 4), 0);
|
|
|
|
/* Program P-state weights to account for frequency power adjustment */
|
|
for (i = 0; i < 16; i++) {
|
|
u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
|
|
unsigned long freq = intel_pxfreq(pxvidfreq);
|
|
unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
|
|
PXVFREQ_PX_SHIFT;
|
|
unsigned long val;
|
|
|
|
val = vid * vid;
|
|
val *= (freq / 1000);
|
|
val *= 255;
|
|
val /= (127*127*900);
|
|
if (val > 0xff)
|
|
DRM_ERROR("bad pxval: %ld\n", val);
|
|
pxw[i] = val;
|
|
}
|
|
/* Render standby states get 0 weight */
|
|
pxw[14] = 0;
|
|
pxw[15] = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
|
|
(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
|
|
I915_WRITE(PXW + (i * 4), val);
|
|
}
|
|
|
|
/* Adjust magic regs to magic values (more experimental results) */
|
|
I915_WRITE(OGW0, 0);
|
|
I915_WRITE(OGW1, 0);
|
|
I915_WRITE(EG0, 0x00007f00);
|
|
I915_WRITE(EG1, 0x0000000e);
|
|
I915_WRITE(EG2, 0x000e0000);
|
|
I915_WRITE(EG3, 0x68000300);
|
|
I915_WRITE(EG4, 0x42000000);
|
|
I915_WRITE(EG5, 0x00140031);
|
|
I915_WRITE(EG6, 0);
|
|
I915_WRITE(EG7, 0);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
I915_WRITE(PXWL + (i * 4), 0);
|
|
|
|
/* Enable PMON + select events */
|
|
I915_WRITE(ECR, 0x80000019);
|
|
|
|
lcfuse = I915_READ(LCFUSE02);
|
|
|
|
dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
|
|
}
|
|
|
|
static bool intel_enable_rc6(struct drm_device *dev)
|
|
{
|
|
/*
|
|
* Respect the kernel parameter if it is set
|
|
*/
|
|
if (i915_enable_rc6 >= 0)
|
|
return i915_enable_rc6;
|
|
|
|
/*
|
|
* Disable RC6 on Ironlake
|
|
*/
|
|
if (INTEL_INFO(dev)->gen == 5)
|
|
return 0;
|
|
|
|
/*
|
|
* Disable rc6 on Sandybridge
|
|
*/
|
|
if (INTEL_INFO(dev)->gen == 6) {
|
|
DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n");
|
|
return 0;
|
|
}
|
|
DRM_DEBUG_DRIVER("RC6 enabled\n");
|
|
return 1;
|
|
}
|
|
|
|
void gen6_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
|
|
u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
|
|
u32 pcu_mbox, rc6_mask = 0;
|
|
u32 gtfifodbg;
|
|
int cur_freq, min_freq, max_freq;
|
|
int i;
|
|
|
|
/* Here begins a magic sequence of register writes to enable
|
|
* auto-downclocking.
|
|
*
|
|
* Perhaps there might be some value in exposing these to
|
|
* userspace...
|
|
*/
|
|
I915_WRITE(GEN6_RC_STATE, 0);
|
|
mutex_lock(&dev_priv->dev->struct_mutex);
|
|
|
|
/* Clear the DBG now so we don't confuse earlier errors */
|
|
if ((gtfifodbg = I915_READ(GTFIFODBG))) {
|
|
DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
|
|
I915_WRITE(GTFIFODBG, gtfifodbg);
|
|
}
|
|
|
|
gen6_gt_force_wake_get(dev_priv);
|
|
|
|
/* disable the counters and set deterministic thresholds */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
|
|
I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
|
|
|
|
for (i = 0; i < I915_NUM_RINGS; i++)
|
|
I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);
|
|
|
|
I915_WRITE(GEN6_RC_SLEEP, 0);
|
|
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
|
|
I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
|
|
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
|
|
|
|
if (intel_enable_rc6(dev_priv->dev))
|
|
rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
|
|
((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0);
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
rc6_mask |
|
|
GEN6_RC_CTL_EI_MODE(1) |
|
|
GEN6_RC_CTL_HW_ENABLE);
|
|
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
GEN6_FREQUENCY(10) |
|
|
GEN6_OFFSET(0) |
|
|
GEN6_AGGRESSIVE_TURBO);
|
|
I915_WRITE(GEN6_RC_VIDEO_FREQ,
|
|
GEN6_FREQUENCY(12));
|
|
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
|
|
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
|
|
18 << 24 |
|
|
6 << 16);
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
|
|
I915_WRITE(GEN6_RP_UP_EI, 100000);
|
|
I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_TURBO |
|
|
GEN6_RP_MEDIA_HW_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
GEN6_RP_DOWN_IDLE_CONT);
|
|
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
|
|
500))
|
|
DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
|
|
|
|
I915_WRITE(GEN6_PCODE_DATA, 0);
|
|
I915_WRITE(GEN6_PCODE_MAILBOX,
|
|
GEN6_PCODE_READY |
|
|
GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
|
|
500))
|
|
DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
|
|
|
|
min_freq = (rp_state_cap & 0xff0000) >> 16;
|
|
max_freq = rp_state_cap & 0xff;
|
|
cur_freq = (gt_perf_status & 0xff00) >> 8;
|
|
|
|
/* Check for overclock support */
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
|
|
500))
|
|
DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
|
|
I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
|
|
pcu_mbox = I915_READ(GEN6_PCODE_DATA);
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
|
|
500))
|
|
DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
|
|
if (pcu_mbox & (1<<31)) { /* OC supported */
|
|
max_freq = pcu_mbox & 0xff;
|
|
DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
|
|
}
|
|
|
|
/* In units of 100MHz */
|
|
dev_priv->max_delay = max_freq;
|
|
dev_priv->min_delay = min_freq;
|
|
dev_priv->cur_delay = cur_freq;
|
|
|
|
/* requires MSI enabled */
|
|
I915_WRITE(GEN6_PMIER,
|
|
GEN6_PM_MBOX_EVENT |
|
|
GEN6_PM_THERMAL_EVENT |
|
|
GEN6_PM_RP_DOWN_TIMEOUT |
|
|
GEN6_PM_RP_UP_THRESHOLD |
|
|
GEN6_PM_RP_DOWN_THRESHOLD |
|
|
GEN6_PM_RP_UP_EI_EXPIRED |
|
|
GEN6_PM_RP_DOWN_EI_EXPIRED);
|
|
spin_lock_irq(&dev_priv->rps_lock);
|
|
WARN_ON(dev_priv->pm_iir != 0);
|
|
I915_WRITE(GEN6_PMIMR, 0);
|
|
spin_unlock_irq(&dev_priv->rps_lock);
|
|
/* enable all PM interrupts */
|
|
I915_WRITE(GEN6_PMINTRMSK, 0);
|
|
|
|
gen6_gt_force_wake_put(dev_priv);
|
|
mutex_unlock(&dev_priv->dev->struct_mutex);
|
|
}
|
|
|
|
void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
int min_freq = 15;
|
|
int gpu_freq, ia_freq, max_ia_freq;
|
|
int scaling_factor = 180;
|
|
|
|
max_ia_freq = cpufreq_quick_get_max(0);
|
|
/*
|
|
* Default to measured freq if none found, PCU will ensure we don't go
|
|
* over
|
|
*/
|
|
if (!max_ia_freq)
|
|
max_ia_freq = tsc_khz;
|
|
|
|
/* Convert from kHz to MHz */
|
|
max_ia_freq /= 1000;
|
|
|
|
mutex_lock(&dev_priv->dev->struct_mutex);
|
|
|
|
/*
|
|
* For each potential GPU frequency, load a ring frequency we'd like
|
|
* to use for memory access. We do this by specifying the IA frequency
|
|
* the PCU should use as a reference to determine the ring frequency.
|
|
*/
|
|
for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
|
|
gpu_freq--) {
|
|
int diff = dev_priv->max_delay - gpu_freq;
|
|
|
|
/*
|
|
* For GPU frequencies less than 750MHz, just use the lowest
|
|
* ring freq.
|
|
*/
|
|
if (gpu_freq < min_freq)
|
|
ia_freq = 800;
|
|
else
|
|
ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
|
|
ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
|
|
|
|
I915_WRITE(GEN6_PCODE_DATA,
|
|
(ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
|
|
gpu_freq);
|
|
I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
|
|
GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
|
|
GEN6_PCODE_READY) == 0, 10)) {
|
|
DRM_ERROR("pcode write of freq table timed out\n");
|
|
continue;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&dev_priv->dev->struct_mutex);
|
|
}
|
|
|
|
static void ironlake_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
/* Required for FBC */
|
|
dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
|
|
DPFCRUNIT_CLOCK_GATE_DISABLE |
|
|
DPFDUNIT_CLOCK_GATE_DISABLE;
|
|
/* Required for CxSR */
|
|
dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
I915_WRITE(PCH_3DCGDIS0,
|
|
MARIUNIT_CLOCK_GATE_DISABLE |
|
|
SVSMUNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(PCH_3DCGDIS1,
|
|
VFMUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
/*
|
|
* According to the spec the following bits should be set in
|
|
* order to enable memory self-refresh
|
|
* The bit 22/21 of 0x42004
|
|
* The bit 5 of 0x42020
|
|
* The bit 15 of 0x45000
|
|
*/
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
(I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
|
|
I915_WRITE(ILK_DSPCLK_GATE,
|
|
(I915_READ(ILK_DSPCLK_GATE) |
|
|
ILK_DPARB_CLK_GATE));
|
|
I915_WRITE(DISP_ARB_CTL,
|
|
(I915_READ(DISP_ARB_CTL) |
|
|
DISP_FBC_WM_DIS));
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
/*
|
|
* Based on the document from hardware guys the following bits
|
|
* should be set unconditionally in order to enable FBC.
|
|
* The bit 22 of 0x42000
|
|
* The bit 22 of 0x42004
|
|
* The bit 7,8,9 of 0x42020.
|
|
*/
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1,
|
|
I915_READ(ILK_DISPLAY_CHICKEN1) |
|
|
ILK_FBCQ_DIS);
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE);
|
|
I915_WRITE(ILK_DSPCLK_GATE,
|
|
I915_READ(ILK_DSPCLK_GATE) |
|
|
ILK_DPFC_DIS1 |
|
|
ILK_DPFC_DIS2 |
|
|
ILK_CLK_FBC);
|
|
}
|
|
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_ELPIN_409_SELECT);
|
|
I915_WRITE(_3D_CHICKEN2,
|
|
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
|
|
_3D_CHICKEN2_WM_READ_PIPELINED);
|
|
}
|
|
|
|
static void gen6_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_ELPIN_409_SELECT);
|
|
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
|
|
* gating disable must be set. Failure to set it results in
|
|
* flickering pixels due to Z write ordering failures after
|
|
* some amount of runtime in the Mesa "fire" demo, and Unigine
|
|
* Sanctuary and Tropics, and apparently anything else with
|
|
* alpha test or pixel discard.
|
|
*
|
|
* According to the spec, bit 11 (RCCUNIT) must also be set,
|
|
* but we didn't debug actual testcases to find it out.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* According to the spec the following bits should be
|
|
* set in order to enable memory self-refresh and fbc:
|
|
* The bit21 and bit22 of 0x42000
|
|
* The bit21 and bit22 of 0x42004
|
|
* The bit5 and bit7 of 0x42020
|
|
* The bit14 of 0x70180
|
|
* The bit14 of 0x71180
|
|
*/
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1,
|
|
I915_READ(ILK_DISPLAY_CHICKEN1) |
|
|
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
|
|
I915_WRITE(ILK_DSPCLK_GATE,
|
|
I915_READ(ILK_DSPCLK_GATE) |
|
|
ILK_DPARB_CLK_GATE |
|
|
ILK_DPFD_CLK_GATE);
|
|
|
|
for_each_pipe(pipe) {
|
|
I915_WRITE(DSPCNTR(pipe),
|
|
I915_READ(DSPCNTR(pipe)) |
|
|
DISPPLANE_TRICKLE_FEED_DISABLE);
|
|
intel_flush_display_plane(dev_priv, pipe);
|
|
}
|
|
}
|
|
|
|
static void ivybridge_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
|
|
* This implements the WaDisableRCZUnitClockGating workaround.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
|
|
|
|
I915_WRITE(IVB_CHICKEN3,
|
|
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
|
|
CHICKEN3_DGMG_DONE_FIX_DISABLE);
|
|
|
|
/* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
|
|
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
|
|
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
|
|
|
|
/* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
|
|
I915_WRITE(GEN7_L3CNTLREG1,
|
|
GEN7_WA_FOR_GEN7_L3_CONTROL);
|
|
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
|
|
GEN7_WA_L3_CHICKEN_MODE);
|
|
|
|
/* This is required by WaCatErrorRejectionIssue */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
for_each_pipe(pipe) {
|
|
I915_WRITE(DSPCNTR(pipe),
|
|
I915_READ(DSPCNTR(pipe)) |
|
|
DISPPLANE_TRICKLE_FEED_DISABLE);
|
|
intel_flush_display_plane(dev_priv, pipe);
|
|
}
|
|
}
|
|
|
|
static void g4x_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dspclk_gate;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, 0);
|
|
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
|
|
GS_UNIT_CLOCK_GATE_DISABLE |
|
|
CL_UNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RAMCLK_GATE_D, 0);
|
|
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
|
|
OVRUNIT_CLOCK_GATE_DISABLE |
|
|
OVCUNIT_CLOCK_GATE_DISABLE;
|
|
if (IS_GM45(dev))
|
|
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
|
|
}
|
|
|
|
static void crestline_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RENCLK_GATE_D2, 0);
|
|
I915_WRITE(DSPCLK_GATE_D, 0);
|
|
I915_WRITE(RAMCLK_GATE_D, 0);
|
|
I915_WRITE16(DEUC, 0);
|
|
}
|
|
|
|
static void broadwater_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
|
|
I965_RCC_CLOCK_GATE_DISABLE |
|
|
I965_RCPB_CLOCK_GATE_DISABLE |
|
|
I965_ISC_CLOCK_GATE_DISABLE |
|
|
I965_FBC_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RENCLK_GATE_D2, 0);
|
|
}
|
|
|
|
static void gen3_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dstate = I915_READ(D_STATE);
|
|
|
|
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
|
|
DSTATE_DOT_CLOCK_GATING;
|
|
I915_WRITE(D_STATE, dstate);
|
|
}
|
|
|
|
static void i85x_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void i830_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void ibx_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/*
|
|
* On Ibex Peak and Cougar Point, we need to disable clock
|
|
* gating for the panel power sequencer or it will fail to
|
|
* start up when no ports are active.
|
|
*/
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void cpt_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
|
|
/*
|
|
* On Ibex Peak and Cougar Point, we need to disable clock
|
|
* gating for the panel power sequencer or it will fail to
|
|
* start up when no ports are active.
|
|
*/
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
|
|
DPLS_EDP_PPS_FIX_DIS);
|
|
/* Without this, mode sets may fail silently on FDI */
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
|
|
}
|
|
|
|
static void ironlake_teardown_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->renderctx) {
|
|
i915_gem_object_unpin(dev_priv->renderctx);
|
|
drm_gem_object_unreference(&dev_priv->renderctx->base);
|
|
dev_priv->renderctx = NULL;
|
|
}
|
|
|
|
if (dev_priv->pwrctx) {
|
|
i915_gem_object_unpin(dev_priv->pwrctx);
|
|
drm_gem_object_unreference(&dev_priv->pwrctx->base);
|
|
dev_priv->pwrctx = NULL;
|
|
}
|
|
}
|
|
|
|
static void ironlake_disable_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (I915_READ(PWRCTXA)) {
|
|
/* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
|
|
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
|
|
wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
|
|
50);
|
|
|
|
I915_WRITE(PWRCTXA, 0);
|
|
POSTING_READ(PWRCTXA);
|
|
|
|
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
|
|
POSTING_READ(RSTDBYCTL);
|
|
}
|
|
|
|
ironlake_teardown_rc6(dev);
|
|
}
|
|
|
|
static int ironlake_setup_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->renderctx == NULL)
|
|
dev_priv->renderctx = intel_alloc_context_page(dev);
|
|
if (!dev_priv->renderctx)
|
|
return -ENOMEM;
|
|
|
|
if (dev_priv->pwrctx == NULL)
|
|
dev_priv->pwrctx = intel_alloc_context_page(dev);
|
|
if (!dev_priv->pwrctx) {
|
|
ironlake_teardown_rc6(dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ironlake_enable_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret;
|
|
|
|
/* rc6 disabled by default due to repeated reports of hanging during
|
|
* boot and resume.
|
|
*/
|
|
if (!intel_enable_rc6(dev))
|
|
return;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
ret = ironlake_setup_rc6(dev);
|
|
if (ret) {
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* GPU can automatically power down the render unit if given a page
|
|
* to save state.
|
|
*/
|
|
ret = BEGIN_LP_RING(6);
|
|
if (ret) {
|
|
ironlake_teardown_rc6(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return;
|
|
}
|
|
|
|
OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
|
|
OUT_RING(MI_SET_CONTEXT);
|
|
OUT_RING(dev_priv->renderctx->gtt_offset |
|
|
MI_MM_SPACE_GTT |
|
|
MI_SAVE_EXT_STATE_EN |
|
|
MI_RESTORE_EXT_STATE_EN |
|
|
MI_RESTORE_INHIBIT);
|
|
OUT_RING(MI_SUSPEND_FLUSH);
|
|
OUT_RING(MI_NOOP);
|
|
OUT_RING(MI_FLUSH);
|
|
ADVANCE_LP_RING();
|
|
|
|
/*
|
|
* Wait for the command parser to advance past MI_SET_CONTEXT. The HW
|
|
* does an implicit flush, combined with MI_FLUSH above, it should be
|
|
* safe to assume that renderctx is valid
|
|
*/
|
|
ret = intel_wait_ring_idle(LP_RING(dev_priv));
|
|
if (ret) {
|
|
DRM_ERROR("failed to enable ironlake power power savings\n");
|
|
ironlake_teardown_rc6(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return;
|
|
}
|
|
|
|
I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
|
|
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
void intel_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->display.init_clock_gating(dev);
|
|
|
|
if (dev_priv->display.init_pch_clock_gating)
|
|
dev_priv->display.init_pch_clock_gating(dev);
|
|
}
|
|
|
|
/* Set up chip specific display functions */
|
|
static void intel_init_display(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/* We always want a DPMS function */
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
dev_priv->display.dpms = ironlake_crtc_dpms;
|
|
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
|
|
dev_priv->display.update_plane = ironlake_update_plane;
|
|
} else {
|
|
dev_priv->display.dpms = i9xx_crtc_dpms;
|
|
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
|
|
dev_priv->display.update_plane = i9xx_update_plane;
|
|
}
|
|
|
|
if (I915_HAS_FBC(dev)) {
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
|
|
dev_priv->display.enable_fbc = ironlake_enable_fbc;
|
|
dev_priv->display.disable_fbc = ironlake_disable_fbc;
|
|
} else if (IS_GM45(dev)) {
|
|
dev_priv->display.fbc_enabled = g4x_fbc_enabled;
|
|
dev_priv->display.enable_fbc = g4x_enable_fbc;
|
|
dev_priv->display.disable_fbc = g4x_disable_fbc;
|
|
} else if (IS_CRESTLINE(dev)) {
|
|
dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
|
|
dev_priv->display.enable_fbc = i8xx_enable_fbc;
|
|
dev_priv->display.disable_fbc = i8xx_disable_fbc;
|
|
}
|
|
/* 855GM needs testing */
|
|
}
|
|
|
|
/* Returns the core display clock speed */
|
|
if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i945_get_display_clock_speed;
|
|
else if (IS_I915G(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i915_get_display_clock_speed;
|
|
else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i9xx_misc_get_display_clock_speed;
|
|
else if (IS_I915GM(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i915gm_get_display_clock_speed;
|
|
else if (IS_I865G(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i865_get_display_clock_speed;
|
|
else if (IS_I85X(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i855_get_display_clock_speed;
|
|
else /* 852, 830 */
|
|
dev_priv->display.get_display_clock_speed =
|
|
i830_get_display_clock_speed;
|
|
|
|
/* For FIFO watermark updates */
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
dev_priv->display.force_wake_get = __gen6_gt_force_wake_get;
|
|
dev_priv->display.force_wake_put = __gen6_gt_force_wake_put;
|
|
|
|
/* IVB configs may use multi-threaded forcewake */
|
|
if (IS_IVYBRIDGE(dev)) {
|
|
u32 ecobus;
|
|
|
|
/* A small trick here - if the bios hasn't configured MT forcewake,
|
|
* and if the device is in RC6, then force_wake_mt_get will not wake
|
|
* the device and the ECOBUS read will return zero. Which will be
|
|
* (correctly) interpreted by the test below as MT forcewake being
|
|
* disabled.
|
|
*/
|
|
mutex_lock(&dev->struct_mutex);
|
|
__gen6_gt_force_wake_mt_get(dev_priv);
|
|
ecobus = I915_READ_NOTRACE(ECOBUS);
|
|
__gen6_gt_force_wake_mt_put(dev_priv);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
if (ecobus & FORCEWAKE_MT_ENABLE) {
|
|
DRM_DEBUG_KMS("Using MT version of forcewake\n");
|
|
dev_priv->display.force_wake_get =
|
|
__gen6_gt_force_wake_mt_get;
|
|
dev_priv->display.force_wake_put =
|
|
__gen6_gt_force_wake_mt_put;
|
|
}
|
|
}
|
|
|
|
if (HAS_PCH_IBX(dev))
|
|
dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating;
|
|
else if (HAS_PCH_CPT(dev))
|
|
dev_priv->display.init_pch_clock_gating = cpt_init_clock_gating;
|
|
|
|
if (IS_GEN5(dev)) {
|
|
if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
|
|
dev_priv->display.update_wm = ironlake_update_wm;
|
|
else {
|
|
DRM_DEBUG_KMS("Failed to get proper latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
|
|
dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
|
|
dev_priv->display.write_eld = ironlake_write_eld;
|
|
} else if (IS_GEN6(dev)) {
|
|
if (SNB_READ_WM0_LATENCY()) {
|
|
dev_priv->display.update_wm = sandybridge_update_wm;
|
|
dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
|
|
} else {
|
|
DRM_DEBUG_KMS("Failed to read display plane latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.fdi_link_train = gen6_fdi_link_train;
|
|
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
|
|
dev_priv->display.write_eld = ironlake_write_eld;
|
|
} else if (IS_IVYBRIDGE(dev)) {
|
|
/* FIXME: detect B0+ stepping and use auto training */
|
|
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
|
|
if (SNB_READ_WM0_LATENCY()) {
|
|
dev_priv->display.update_wm = sandybridge_update_wm;
|
|
dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
|
|
} else {
|
|
DRM_DEBUG_KMS("Failed to read display plane latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
|
|
dev_priv->display.write_eld = ironlake_write_eld;
|
|
} else
|
|
dev_priv->display.update_wm = NULL;
|
|
} else if (IS_PINEVIEW(dev)) {
|
|
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
|
|
dev_priv->is_ddr3,
|
|
dev_priv->fsb_freq,
|
|
dev_priv->mem_freq)) {
|
|
DRM_INFO("failed to find known CxSR latency "
|
|
"(found ddr%s fsb freq %d, mem freq %d), "
|
|
"disabling CxSR\n",
|
|
(dev_priv->is_ddr3 == 1) ? "3" : "2",
|
|
dev_priv->fsb_freq, dev_priv->mem_freq);
|
|
/* Disable CxSR and never update its watermark again */
|
|
pineview_disable_cxsr(dev);
|
|
dev_priv->display.update_wm = NULL;
|
|
} else
|
|
dev_priv->display.update_wm = pineview_update_wm;
|
|
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
|
|
} else if (IS_G4X(dev)) {
|
|
dev_priv->display.write_eld = g4x_write_eld;
|
|
dev_priv->display.update_wm = g4x_update_wm;
|
|
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
|
|
} else if (IS_GEN4(dev)) {
|
|
dev_priv->display.update_wm = i965_update_wm;
|
|
if (IS_CRESTLINE(dev))
|
|
dev_priv->display.init_clock_gating = crestline_init_clock_gating;
|
|
else if (IS_BROADWATER(dev))
|
|
dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
|
|
} else if (IS_GEN3(dev)) {
|
|
dev_priv->display.update_wm = i9xx_update_wm;
|
|
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
|
|
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
|
|
} else if (IS_I865G(dev)) {
|
|
dev_priv->display.update_wm = i830_update_wm;
|
|
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
|
|
dev_priv->display.get_fifo_size = i830_get_fifo_size;
|
|
} else if (IS_I85X(dev)) {
|
|
dev_priv->display.update_wm = i9xx_update_wm;
|
|
dev_priv->display.get_fifo_size = i85x_get_fifo_size;
|
|
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
|
|
} else {
|
|
dev_priv->display.update_wm = i830_update_wm;
|
|
dev_priv->display.init_clock_gating = i830_init_clock_gating;
|
|
if (IS_845G(dev))
|
|
dev_priv->display.get_fifo_size = i845_get_fifo_size;
|
|
else
|
|
dev_priv->display.get_fifo_size = i830_get_fifo_size;
|
|
}
|
|
|
|
/* Default just returns -ENODEV to indicate unsupported */
|
|
dev_priv->display.queue_flip = intel_default_queue_flip;
|
|
|
|
switch (INTEL_INFO(dev)->gen) {
|
|
case 2:
|
|
dev_priv->display.queue_flip = intel_gen2_queue_flip;
|
|
break;
|
|
|
|
case 3:
|
|
dev_priv->display.queue_flip = intel_gen3_queue_flip;
|
|
break;
|
|
|
|
case 4:
|
|
case 5:
|
|
dev_priv->display.queue_flip = intel_gen4_queue_flip;
|
|
break;
|
|
|
|
case 6:
|
|
dev_priv->display.queue_flip = intel_gen6_queue_flip;
|
|
break;
|
|
case 7:
|
|
dev_priv->display.queue_flip = intel_gen7_queue_flip;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
|
|
* resume, or other times. This quirk makes sure that's the case for
|
|
* affected systems.
|
|
*/
|
|
static void quirk_pipea_force(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->quirks |= QUIRK_PIPEA_FORCE;
|
|
DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
|
|
}
|
|
|
|
/*
|
|
* Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
|
|
*/
|
|
static void quirk_ssc_force_disable(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
|
|
}
|
|
|
|
struct intel_quirk {
|
|
int device;
|
|
int subsystem_vendor;
|
|
int subsystem_device;
|
|
void (*hook)(struct drm_device *dev);
|
|
};
|
|
|
|
struct intel_quirk intel_quirks[] = {
|
|
/* HP Mini needs pipe A force quirk (LP: #322104) */
|
|
{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
|
|
|
|
/* Thinkpad R31 needs pipe A force quirk */
|
|
{ 0x3577, 0x1014, 0x0505, quirk_pipea_force },
|
|
/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
|
|
{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
|
|
|
|
/* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
|
|
{ 0x3577, 0x1014, 0x0513, quirk_pipea_force },
|
|
/* ThinkPad X40 needs pipe A force quirk */
|
|
|
|
/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
|
|
{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
|
|
|
|
/* 855 & before need to leave pipe A & dpll A up */
|
|
{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
|
|
{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
|
|
|
|
/* Lenovo U160 cannot use SSC on LVDS */
|
|
{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
|
|
|
|
/* Sony Vaio Y cannot use SSC on LVDS */
|
|
{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
|
|
};
|
|
|
|
static void intel_init_quirks(struct drm_device *dev)
|
|
{
|
|
struct pci_dev *d = dev->pdev;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
|
|
struct intel_quirk *q = &intel_quirks[i];
|
|
|
|
if (d->device == q->device &&
|
|
(d->subsystem_vendor == q->subsystem_vendor ||
|
|
q->subsystem_vendor == PCI_ANY_ID) &&
|
|
(d->subsystem_device == q->subsystem_device ||
|
|
q->subsystem_device == PCI_ANY_ID))
|
|
q->hook(dev);
|
|
}
|
|
}
|
|
|
|
/* Disable the VGA plane that we never use */
|
|
static void i915_disable_vga(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u8 sr1;
|
|
u32 vga_reg;
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
vga_reg = CPU_VGACNTRL;
|
|
else
|
|
vga_reg = VGACNTRL;
|
|
|
|
vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
outb(1, VGA_SR_INDEX);
|
|
sr1 = inb(VGA_SR_DATA);
|
|
outb(sr1 | 1<<5, VGA_SR_DATA);
|
|
vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
udelay(300);
|
|
|
|
I915_WRITE(vga_reg, VGA_DISP_DISABLE);
|
|
POSTING_READ(vga_reg);
|
|
}
|
|
|
|
void intel_modeset_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int i, ret;
|
|
|
|
drm_mode_config_init(dev);
|
|
|
|
dev->mode_config.min_width = 0;
|
|
dev->mode_config.min_height = 0;
|
|
|
|
dev->mode_config.preferred_depth = 24;
|
|
dev->mode_config.prefer_shadow = 1;
|
|
|
|
dev->mode_config.funcs = (void *)&intel_mode_funcs;
|
|
|
|
intel_init_quirks(dev);
|
|
|
|
intel_init_display(dev);
|
|
|
|
if (IS_GEN2(dev)) {
|
|
dev->mode_config.max_width = 2048;
|
|
dev->mode_config.max_height = 2048;
|
|
} else if (IS_GEN3(dev)) {
|
|
dev->mode_config.max_width = 4096;
|
|
dev->mode_config.max_height = 4096;
|
|
} else {
|
|
dev->mode_config.max_width = 8192;
|
|
dev->mode_config.max_height = 8192;
|
|
}
|
|
dev->mode_config.fb_base = dev->agp->base;
|
|
|
|
DRM_DEBUG_KMS("%d display pipe%s available.\n",
|
|
dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
|
|
|
|
for (i = 0; i < dev_priv->num_pipe; i++) {
|
|
intel_crtc_init(dev, i);
|
|
ret = intel_plane_init(dev, i);
|
|
if (ret)
|
|
DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
|
|
}
|
|
|
|
/* Just disable it once at startup */
|
|
i915_disable_vga(dev);
|
|
intel_setup_outputs(dev);
|
|
|
|
intel_init_clock_gating(dev);
|
|
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
ironlake_enable_drps(dev);
|
|
intel_init_emon(dev);
|
|
}
|
|
|
|
if (IS_GEN6(dev) || IS_GEN7(dev)) {
|
|
gen6_enable_rps(dev_priv);
|
|
gen6_update_ring_freq(dev_priv);
|
|
}
|
|
|
|
INIT_WORK(&dev_priv->idle_work, intel_idle_update);
|
|
setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
|
|
(unsigned long)dev);
|
|
}
|
|
|
|
void intel_modeset_gem_init(struct drm_device *dev)
|
|
{
|
|
if (IS_IRONLAKE_M(dev))
|
|
ironlake_enable_rc6(dev);
|
|
|
|
intel_setup_overlay(dev);
|
|
}
|
|
|
|
void intel_modeset_cleanup(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
struct intel_crtc *intel_crtc;
|
|
|
|
drm_kms_helper_poll_fini(dev);
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
intel_unregister_dsm_handler();
|
|
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
/* Skip inactive CRTCs */
|
|
if (!crtc->fb)
|
|
continue;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
intel_increase_pllclock(crtc);
|
|
}
|
|
|
|
intel_disable_fbc(dev);
|
|
|
|
if (IS_IRONLAKE_M(dev))
|
|
ironlake_disable_drps(dev);
|
|
if (IS_GEN6(dev) || IS_GEN7(dev))
|
|
gen6_disable_rps(dev);
|
|
|
|
if (IS_IRONLAKE_M(dev))
|
|
ironlake_disable_rc6(dev);
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
/* Disable the irq before mode object teardown, for the irq might
|
|
* enqueue unpin/hotplug work. */
|
|
drm_irq_uninstall(dev);
|
|
cancel_work_sync(&dev_priv->hotplug_work);
|
|
cancel_work_sync(&dev_priv->rps_work);
|
|
|
|
/* flush any delayed tasks or pending work */
|
|
flush_scheduled_work();
|
|
|
|
/* Shut off idle work before the crtcs get freed. */
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
del_timer_sync(&intel_crtc->idle_timer);
|
|
}
|
|
del_timer_sync(&dev_priv->idle_timer);
|
|
cancel_work_sync(&dev_priv->idle_work);
|
|
|
|
drm_mode_config_cleanup(dev);
|
|
}
|
|
|
|
/*
|
|
* Return which encoder is currently attached for connector.
|
|
*/
|
|
struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
|
|
{
|
|
return &intel_attached_encoder(connector)->base;
|
|
}
|
|
|
|
void intel_connector_attach_encoder(struct intel_connector *connector,
|
|
struct intel_encoder *encoder)
|
|
{
|
|
connector->encoder = encoder;
|
|
drm_mode_connector_attach_encoder(&connector->base,
|
|
&encoder->base);
|
|
}
|
|
|
|
/*
|
|
* set vga decode state - true == enable VGA decode
|
|
*/
|
|
int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u16 gmch_ctrl;
|
|
|
|
pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
|
|
if (state)
|
|
gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
|
|
else
|
|
gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
|
|
pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
#include <linux/seq_file.h>
|
|
|
|
struct intel_display_error_state {
|
|
struct intel_cursor_error_state {
|
|
u32 control;
|
|
u32 position;
|
|
u32 base;
|
|
u32 size;
|
|
} cursor[2];
|
|
|
|
struct intel_pipe_error_state {
|
|
u32 conf;
|
|
u32 source;
|
|
|
|
u32 htotal;
|
|
u32 hblank;
|
|
u32 hsync;
|
|
u32 vtotal;
|
|
u32 vblank;
|
|
u32 vsync;
|
|
} pipe[2];
|
|
|
|
struct intel_plane_error_state {
|
|
u32 control;
|
|
u32 stride;
|
|
u32 size;
|
|
u32 pos;
|
|
u32 addr;
|
|
u32 surface;
|
|
u32 tile_offset;
|
|
} plane[2];
|
|
};
|
|
|
|
struct intel_display_error_state *
|
|
intel_display_capture_error_state(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_display_error_state *error;
|
|
int i;
|
|
|
|
error = kmalloc(sizeof(*error), GFP_ATOMIC);
|
|
if (error == NULL)
|
|
return NULL;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
error->cursor[i].control = I915_READ(CURCNTR(i));
|
|
error->cursor[i].position = I915_READ(CURPOS(i));
|
|
error->cursor[i].base = I915_READ(CURBASE(i));
|
|
|
|
error->plane[i].control = I915_READ(DSPCNTR(i));
|
|
error->plane[i].stride = I915_READ(DSPSTRIDE(i));
|
|
error->plane[i].size = I915_READ(DSPSIZE(i));
|
|
error->plane[i].pos = I915_READ(DSPPOS(i));
|
|
error->plane[i].addr = I915_READ(DSPADDR(i));
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
error->plane[i].surface = I915_READ(DSPSURF(i));
|
|
error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
|
|
}
|
|
|
|
error->pipe[i].conf = I915_READ(PIPECONF(i));
|
|
error->pipe[i].source = I915_READ(PIPESRC(i));
|
|
error->pipe[i].htotal = I915_READ(HTOTAL(i));
|
|
error->pipe[i].hblank = I915_READ(HBLANK(i));
|
|
error->pipe[i].hsync = I915_READ(HSYNC(i));
|
|
error->pipe[i].vtotal = I915_READ(VTOTAL(i));
|
|
error->pipe[i].vblank = I915_READ(VBLANK(i));
|
|
error->pipe[i].vsync = I915_READ(VSYNC(i));
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
void
|
|
intel_display_print_error_state(struct seq_file *m,
|
|
struct drm_device *dev,
|
|
struct intel_display_error_state *error)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
seq_printf(m, "Pipe [%d]:\n", i);
|
|
seq_printf(m, " CONF: %08x\n", error->pipe[i].conf);
|
|
seq_printf(m, " SRC: %08x\n", error->pipe[i].source);
|
|
seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
|
|
seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
|
|
seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
|
|
seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
|
|
seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
|
|
seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
|
|
|
|
seq_printf(m, "Plane [%d]:\n", i);
|
|
seq_printf(m, " CNTR: %08x\n", error->plane[i].control);
|
|
seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
|
|
seq_printf(m, " SIZE: %08x\n", error->plane[i].size);
|
|
seq_printf(m, " POS: %08x\n", error->plane[i].pos);
|
|
seq_printf(m, " ADDR: %08x\n", error->plane[i].addr);
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
seq_printf(m, " SURF: %08x\n", error->plane[i].surface);
|
|
seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
|
|
}
|
|
|
|
seq_printf(m, "Cursor [%d]:\n", i);
|
|
seq_printf(m, " CNTR: %08x\n", error->cursor[i].control);
|
|
seq_printf(m, " POS: %08x\n", error->cursor[i].position);
|
|
seq_printf(m, " BASE: %08x\n", error->cursor[i].base);
|
|
}
|
|
}
|
|
#endif
|