![Andrew F. Davis](/assets/img/avatar_default.png)
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
179 lines
4.6 KiB
C
179 lines
4.6 KiB
C
/*
|
|
* ADIS16130 Digital Output, High Precision Angular Rate Sensor driver
|
|
*
|
|
* Copyright 2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/mutex.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
#define ADIS16130_CON 0x0
|
|
#define ADIS16130_CON_RD (1 << 6)
|
|
#define ADIS16130_IOP 0x1
|
|
|
|
/* 1 = data-ready signal low when unread data on all channels; */
|
|
#define ADIS16130_IOP_ALL_RDY (1 << 3)
|
|
#define ADIS16130_IOP_SYNC (1 << 0) /* 1 = synchronization enabled */
|
|
#define ADIS16130_RATEDATA 0x8 /* Gyroscope output, rate of rotation */
|
|
#define ADIS16130_TEMPDATA 0xA /* Temperature output */
|
|
#define ADIS16130_RATECS 0x28 /* Gyroscope channel setup */
|
|
#define ADIS16130_RATECS_EN (1 << 3) /* 1 = channel enable; */
|
|
#define ADIS16130_TEMPCS 0x2A /* Temperature channel setup */
|
|
#define ADIS16130_TEMPCS_EN (1 << 3)
|
|
#define ADIS16130_RATECONV 0x30
|
|
#define ADIS16130_TEMPCONV 0x32
|
|
#define ADIS16130_MODE 0x38
|
|
#define ADIS16130_MODE_24BIT (1 << 1) /* 1 = 24-bit resolution; */
|
|
|
|
/**
|
|
* struct adis16130_state - device instance specific data
|
|
* @us: actual spi_device to write data
|
|
* @buf_lock: mutex to protect tx and rx
|
|
* @buf: unified tx/rx buffer
|
|
**/
|
|
struct adis16130_state {
|
|
struct spi_device *us;
|
|
struct mutex buf_lock;
|
|
u8 buf[4] ____cacheline_aligned;
|
|
};
|
|
|
|
static int adis16130_spi_read(struct iio_dev *indio_dev, u8 reg_addr, u32 *val)
|
|
{
|
|
int ret;
|
|
struct adis16130_state *st = iio_priv(indio_dev);
|
|
struct spi_transfer xfer = {
|
|
.tx_buf = st->buf,
|
|
.rx_buf = st->buf,
|
|
.len = 4,
|
|
};
|
|
|
|
mutex_lock(&st->buf_lock);
|
|
|
|
st->buf[0] = ADIS16130_CON_RD | reg_addr;
|
|
st->buf[1] = st->buf[2] = st->buf[3] = 0;
|
|
|
|
ret = spi_sync_transfer(st->us, &xfer, 1);
|
|
if (ret == 0)
|
|
*val = (st->buf[1] << 16) | (st->buf[2] << 8) | st->buf[3];
|
|
mutex_unlock(&st->buf_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adis16130_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2,
|
|
long mask)
|
|
{
|
|
int ret;
|
|
u32 temp;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
/* Take the iio_dev status lock */
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = adis16130_spi_read(indio_dev, chan->address, &temp);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
if (ret)
|
|
return ret;
|
|
*val = temp;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_ANGL_VEL:
|
|
/* 0 degree = 838860, 250 degree = 14260608 */
|
|
*val = 250;
|
|
*val2 = 336440817; /* RAD_TO_DEGREE(14260608 - 8388608) */
|
|
return IIO_VAL_FRACTIONAL;
|
|
case IIO_TEMP:
|
|
/* 0C = 8036283, 105C = 9516048 */
|
|
*val = 105000;
|
|
*val2 = 9516048 - 8036283;
|
|
return IIO_VAL_FRACTIONAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
switch (chan->type) {
|
|
case IIO_ANGL_VEL:
|
|
*val = -8388608;
|
|
return IIO_VAL_INT;
|
|
case IIO_TEMP:
|
|
*val = -8036283;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_chan_spec adis16130_channels[] = {
|
|
{
|
|
.type = IIO_ANGL_VEL,
|
|
.modified = 1,
|
|
.channel2 = IIO_MOD_Z,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.address = ADIS16130_RATEDATA,
|
|
}, {
|
|
.type = IIO_TEMP,
|
|
.indexed = 1,
|
|
.channel = 0,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.address = ADIS16130_TEMPDATA,
|
|
}
|
|
};
|
|
|
|
static const struct iio_info adis16130_info = {
|
|
.read_raw = &adis16130_read_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int adis16130_probe(struct spi_device *spi)
|
|
{
|
|
struct adis16130_state *st;
|
|
struct iio_dev *indio_dev;
|
|
|
|
/* setup the industrialio driver allocated elements */
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
st = iio_priv(indio_dev);
|
|
/* this is only used for removal purposes */
|
|
spi_set_drvdata(spi, indio_dev);
|
|
st->us = spi;
|
|
mutex_init(&st->buf_lock);
|
|
indio_dev->name = spi->dev.driver->name;
|
|
indio_dev->channels = adis16130_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(adis16130_channels);
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->info = &adis16130_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
}
|
|
|
|
static struct spi_driver adis16130_driver = {
|
|
.driver = {
|
|
.name = "adis16130",
|
|
},
|
|
.probe = adis16130_probe,
|
|
};
|
|
module_spi_driver(adis16130_driver);
|
|
|
|
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
|
|
MODULE_DESCRIPTION("Analog Devices ADIS16130 High Precision Angular Rate");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:adis16130");
|