![Arnd Bergmann](/assets/img/avatar_default.png)
AT91 SoC related code modifications: a cleanup in defconfigs and a one liner in a board file. The most important is the move to atmel-mci driver in AT91 SoC & boards. The old at91_mci (marked as deprecated) will be removed in 3.7. So all platform data for this old driver are erased and replace by information needed by atmel-mci driver. * tag 'at91-for-next-soc' of git://github.com/at91linux/linux-at91: ARM: at91: add atmel-mci support for chips and boards which can use it ARM: at91/defconfig: change the MCI driver to use in defconfigs ARM: at91: set i2c_board_info.type to "ds1339" directly ARM: at91/defconfig: Remove unaffected config option Signed-off-by: Arnd Bergmann <arnd@arndb.de>
259 lines
6 KiB
C
259 lines
6 KiB
C
/*
|
|
* linux/arch/arm/mach-at91/board-csb337.c
|
|
*
|
|
* Copyright (C) 2005 SAN People
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/board.h>
|
|
#include <mach/at91_aic.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
static void __init csb337_init_early(void)
|
|
{
|
|
/* Initialize processor: 3.6864 MHz crystal */
|
|
at91_initialize(3686400);
|
|
}
|
|
|
|
static struct macb_platform_data __initdata csb337_eth_data = {
|
|
.phy_irq_pin = AT91_PIN_PC2,
|
|
.is_rmii = 0,
|
|
};
|
|
|
|
static struct at91_usbh_data __initdata csb337_usbh_data = {
|
|
.ports = 2,
|
|
.vbus_pin = {-EINVAL, -EINVAL},
|
|
.overcurrent_pin= {-EINVAL, -EINVAL},
|
|
};
|
|
|
|
static struct at91_udc_data __initdata csb337_udc_data = {
|
|
.pullup_pin = AT91_PIN_PA24,
|
|
.vbus_pin = -EINVAL,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("ds1307", 0x68),
|
|
},
|
|
};
|
|
|
|
static struct at91_cf_data __initdata csb337_cf_data = {
|
|
/*
|
|
* connector P4 on the CSB 337 mates to
|
|
* connector P8 on the CSB 300CF
|
|
*/
|
|
|
|
/* CSB337 specific */
|
|
.det_pin = AT91_PIN_PC3,
|
|
|
|
/* CSB300CF specific */
|
|
.irq_pin = AT91_PIN_PA19,
|
|
.vcc_pin = AT91_PIN_PD0,
|
|
.rst_pin = AT91_PIN_PD2,
|
|
};
|
|
|
|
static struct mci_platform_data __initdata csb337_mci0_data = {
|
|
.slot[0] = {
|
|
.bus_width = 4,
|
|
.detect_pin = AT91_PIN_PD5,
|
|
.wp_pin = AT91_PIN_PD6,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info csb337_spi_devices[] = {
|
|
{ /* CAN controller */
|
|
.modalias = "sak82c900",
|
|
.chip_select = 0,
|
|
.max_speed_hz = 6 * 1000 * 1000,
|
|
},
|
|
};
|
|
|
|
#define CSB_FLASH_BASE AT91_CHIPSELECT_0
|
|
#define CSB_FLASH_SIZE SZ_8M
|
|
|
|
static struct mtd_partition csb_flash_partitions[] = {
|
|
{
|
|
.name = "uMON flash",
|
|
.offset = 0,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = MTD_WRITEABLE, /* read only */
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data csb_flash_data = {
|
|
.width = 2,
|
|
.parts = csb_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(csb_flash_partitions),
|
|
};
|
|
|
|
static struct resource csb_flash_resources[] = {
|
|
{
|
|
.start = CSB_FLASH_BASE,
|
|
.end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device csb_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &csb_flash_data,
|
|
},
|
|
.resource = csb_flash_resources,
|
|
.num_resources = ARRAY_SIZE(csb_flash_resources),
|
|
};
|
|
|
|
/*
|
|
* GPIO Buttons (on CSB300)
|
|
*/
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
static struct gpio_keys_button csb300_buttons[] = {
|
|
{
|
|
.gpio = AT91_PIN_PB29,
|
|
.code = BTN_0,
|
|
.desc = "sw0",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PB28,
|
|
.code = BTN_1,
|
|
.desc = "sw1",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PA21,
|
|
.code = BTN_2,
|
|
.desc = "sw2",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_platform_data csb300_button_data = {
|
|
.buttons = csb300_buttons,
|
|
.nbuttons = ARRAY_SIZE(csb300_buttons),
|
|
};
|
|
|
|
static struct platform_device csb300_button_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
.dev = {
|
|
.platform_data = &csb300_button_data,
|
|
}
|
|
};
|
|
|
|
static void __init csb300_add_device_buttons(void)
|
|
{
|
|
at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
|
|
at91_set_deglitch(AT91_PIN_PB29, 1);
|
|
at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
|
|
at91_set_deglitch(AT91_PIN_PB28, 1);
|
|
at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
|
|
at91_set_deglitch(AT91_PIN_PA21, 1);
|
|
|
|
platform_device_register(&csb300_button_device);
|
|
}
|
|
#else
|
|
static void __init csb300_add_device_buttons(void) {}
|
|
#endif
|
|
|
|
static struct gpio_led csb_leds[] = {
|
|
{ /* "led0", yellow */
|
|
.name = "led0",
|
|
.gpio = AT91_PIN_PB2,
|
|
.active_low = 1,
|
|
.default_trigger = "heartbeat",
|
|
},
|
|
{ /* "led1", green */
|
|
.name = "led1",
|
|
.gpio = AT91_PIN_PB1,
|
|
.active_low = 1,
|
|
.default_trigger = "mmc0",
|
|
},
|
|
{ /* "led2", yellow */
|
|
.name = "led2",
|
|
.gpio = AT91_PIN_PB0,
|
|
.active_low = 1,
|
|
.default_trigger = "ide-disk",
|
|
}
|
|
};
|
|
|
|
|
|
static void __init csb337_board_init(void)
|
|
{
|
|
/* Serial */
|
|
/* DBGU on ttyS0 */
|
|
at91_register_uart(0, 0, 0);
|
|
at91_add_device_serial();
|
|
/* Ethernet */
|
|
at91_add_device_eth(&csb337_eth_data);
|
|
/* USB Host */
|
|
at91_add_device_usbh(&csb337_usbh_data);
|
|
/* USB Device */
|
|
at91_add_device_udc(&csb337_udc_data);
|
|
/* I2C */
|
|
at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
|
|
/* Compact Flash */
|
|
at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
|
|
at91_add_device_cf(&csb337_cf_data);
|
|
/* SPI */
|
|
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
|
|
/* MMC */
|
|
at91_add_device_mci(0, &csb337_mci0_data);
|
|
/* NOR flash */
|
|
platform_device_register(&csb_flash);
|
|
/* LEDs */
|
|
at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
|
|
/* Switches on CSB300 */
|
|
csb300_add_device_buttons();
|
|
}
|
|
|
|
MACHINE_START(CSB337, "Cogent CSB337")
|
|
/* Maintainer: Bill Gatliff */
|
|
.timer = &at91rm9200_timer,
|
|
.map_io = at91_map_io,
|
|
.handle_irq = at91_aic_handle_irq,
|
|
.init_early = csb337_init_early,
|
|
.init_irq = at91_init_irq_default,
|
|
.init_machine = csb337_board_init,
|
|
MACHINE_END
|