alistair23-linux/drivers/hid/hid-cp2112.c
Linus Torvalds 2ec98f5678 Bulk GPIO changes for the v5.3 kernel cycle:
Core:
 
 - When a gpio_chip request GPIOs from itself, it can now fully
   control the line characteristics, both machine and consumer
   flags. This makes a lot of sense, but took some time before I
   figured out that this is how it has to work.
 
 - Several smallish documentation fixes.
 
 New drivers:
 
 - The PCA953x driver now supports the TI TCA9539.
 
 - The DaVinci driver now supports the K3 AM654 SoCs.
 
 Driver improvements:
 
 - Major overhaul and hardening of the OMAP driver by Russell
   King.
 
 - Starting to move some drivers to the new API passing irq_chip
   along with the gpio_chip when adding the gpio_chip instead
   of adding it separately.
 
 Unrelated:
 
 - Delete the FMC subsystem.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl0i7gEACgkQQRCzN7AZ
 XXOeUA/+JKyI2zebTWBcgtxhn6VQCufMCtFmQl2JkEcy4pT7aBJcGWqFQCBW2Szf
 VTtqc8nNa90SZoOzsNbkeQgRjNKGZruMbh0ARUPcW4v3ZJHtUNUEDLTo8c3iyTgS
 9k/FTeaTLt4WSZujeAO0O7G4KNnOOlTKLh58dr0PmXUR+0v+fbMhcJqJ9ABueV+V
 qENdpkTuG1ZcvzgLhBBEXdt3Plw9ICLWmPXtwY+784ewucVPbyQX7jV4+bBZ25fL
 DerCuMIgL5vRWWdiFO6/Jp603rHzZpTnjLJJocXUFiD6zA5rvU2jTWxsnUttjisg
 8cTLMyQspsDvBxhEhCJVTuIKotbKH900TSaz+vx20W72/A1euy4y6uVi8FGZo4Ww
 KDkzB7anwHyEFKGnlYgHzDrfctgZrhQoyFz808DQRYg1JseZB5oGVDvScrPBD43j
 nbNDd8gwG4yp3tFnDx9xjIwQy3Ax4d510rAZyUN2801IlbA1bueq4t6Z2cCucWzX
 XA1gCKlXe4BUeitRAoZtqZNZG1ymEysW4jXy1V8xrwtAf8+QSN+xO98akz3VpnQL
 ae9q+HtF76fDBY1xFSXT37Ma3+4OR2vMF9QWuo4TCb9j1cL7llf8ZxtUq9LEHbDu
 erKLSSnwSFmqJNGSEA5SulGOCR/tRPkClngE9x0XEM6gOD+bs6E=
 =8zSV
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...
2019-07-09 09:07:00 -07:00

1478 lines
36 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
* Copyright (c) 2013,2014 Uplogix, Inc.
* David Barksdale <dbarksdale@uplogix.com>
*/
/*
* The Silicon Labs CP2112 chip is a USB HID device which provides an
* SMBus controller for talking to slave devices and 8 GPIO pins. The
* host communicates with the CP2112 via raw HID reports.
*
* Data Sheet:
* http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
* Programming Interface Specification:
* https://www.silabs.com/documents/public/application-notes/an495-cp2112-interface-specification.pdf
*/
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/gpio/driver.h>
#include <linux/hid.h>
#include <linux/hidraw.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/nls.h>
#include <linux/usb/ch9.h>
#include "hid-ids.h"
#define CP2112_REPORT_MAX_LENGTH 64
#define CP2112_GPIO_CONFIG_LENGTH 5
#define CP2112_GPIO_GET_LENGTH 2
#define CP2112_GPIO_SET_LENGTH 3
enum {
CP2112_GPIO_CONFIG = 0x02,
CP2112_GPIO_GET = 0x03,
CP2112_GPIO_SET = 0x04,
CP2112_GET_VERSION_INFO = 0x05,
CP2112_SMBUS_CONFIG = 0x06,
CP2112_DATA_READ_REQUEST = 0x10,
CP2112_DATA_WRITE_READ_REQUEST = 0x11,
CP2112_DATA_READ_FORCE_SEND = 0x12,
CP2112_DATA_READ_RESPONSE = 0x13,
CP2112_DATA_WRITE_REQUEST = 0x14,
CP2112_TRANSFER_STATUS_REQUEST = 0x15,
CP2112_TRANSFER_STATUS_RESPONSE = 0x16,
CP2112_CANCEL_TRANSFER = 0x17,
CP2112_LOCK_BYTE = 0x20,
CP2112_USB_CONFIG = 0x21,
CP2112_MANUFACTURER_STRING = 0x22,
CP2112_PRODUCT_STRING = 0x23,
CP2112_SERIAL_STRING = 0x24,
};
enum {
STATUS0_IDLE = 0x00,
STATUS0_BUSY = 0x01,
STATUS0_COMPLETE = 0x02,
STATUS0_ERROR = 0x03,
};
enum {
STATUS1_TIMEOUT_NACK = 0x00,
STATUS1_TIMEOUT_BUS = 0x01,
STATUS1_ARBITRATION_LOST = 0x02,
STATUS1_READ_INCOMPLETE = 0x03,
STATUS1_WRITE_INCOMPLETE = 0x04,
STATUS1_SUCCESS = 0x05,
};
struct cp2112_smbus_config_report {
u8 report; /* CP2112_SMBUS_CONFIG */
__be32 clock_speed; /* Hz */
u8 device_address; /* Stored in the upper 7 bits */
u8 auto_send_read; /* 1 = enabled, 0 = disabled */
__be16 write_timeout; /* ms, 0 = no timeout */
__be16 read_timeout; /* ms, 0 = no timeout */
u8 scl_low_timeout; /* 1 = enabled, 0 = disabled */
__be16 retry_time; /* # of retries, 0 = no limit */
} __packed;
struct cp2112_usb_config_report {
u8 report; /* CP2112_USB_CONFIG */
__le16 vid; /* Vendor ID */
__le16 pid; /* Product ID */
u8 max_power; /* Power requested in 2mA units */
u8 power_mode; /* 0x00 = bus powered
0x01 = self powered & regulator off
0x02 = self powered & regulator on */
u8 release_major;
u8 release_minor;
u8 mask; /* What fields to program */
} __packed;
struct cp2112_read_req_report {
u8 report; /* CP2112_DATA_READ_REQUEST */
u8 slave_address;
__be16 length;
} __packed;
struct cp2112_write_read_req_report {
u8 report; /* CP2112_DATA_WRITE_READ_REQUEST */
u8 slave_address;
__be16 length;
u8 target_address_length;
u8 target_address[16];
} __packed;
struct cp2112_write_req_report {
u8 report; /* CP2112_DATA_WRITE_REQUEST */
u8 slave_address;
u8 length;
u8 data[61];
} __packed;
struct cp2112_force_read_report {
u8 report; /* CP2112_DATA_READ_FORCE_SEND */
__be16 length;
} __packed;
struct cp2112_xfer_status_report {
u8 report; /* CP2112_TRANSFER_STATUS_RESPONSE */
u8 status0; /* STATUS0_* */
u8 status1; /* STATUS1_* */
__be16 retries;
__be16 length;
} __packed;
struct cp2112_string_report {
u8 dummy; /* force .string to be aligned */
u8 report; /* CP2112_*_STRING */
u8 length; /* length in bytes of everyting after .report */
u8 type; /* USB_DT_STRING */
wchar_t string[30]; /* UTF16_LITTLE_ENDIAN string */
} __packed;
/* Number of times to request transfer status before giving up waiting for a
transfer to complete. This may need to be changed if SMBUS clock, retries,
or read/write/scl_low timeout settings are changed. */
static const int XFER_STATUS_RETRIES = 10;
/* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
CP2112_TRANSFER_STATUS_RESPONSE. */
static const int RESPONSE_TIMEOUT = 50;
static const struct hid_device_id cp2112_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
{ }
};
MODULE_DEVICE_TABLE(hid, cp2112_devices);
struct cp2112_device {
struct i2c_adapter adap;
struct hid_device *hdev;
wait_queue_head_t wait;
u8 read_data[61];
u8 read_length;
u8 hwversion;
int xfer_status;
atomic_t read_avail;
atomic_t xfer_avail;
struct gpio_chip gc;
u8 *in_out_buffer;
struct mutex lock;
struct gpio_desc *desc[8];
bool gpio_poll;
struct delayed_work gpio_poll_worker;
unsigned long irq_mask;
u8 gpio_prev_state;
};
static int gpio_push_pull = 0xFF;
module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask");
static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
int ret;
mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret != CP2112_GPIO_CONFIG_LENGTH) {
hid_err(hdev, "error requesting GPIO config: %d\n", ret);
if (ret >= 0)
ret = -EIO;
goto exit;
}
buf[1] &= ~(1 << offset);
buf[2] = gpio_push_pull;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
if (ret != CP2112_GPIO_CONFIG_LENGTH) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
if (ret >= 0)
ret = -EIO;
goto exit;
}
ret = 0;
exit:
mutex_unlock(&dev->lock);
return ret;
}
static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
int ret;
mutex_lock(&dev->lock);
buf[0] = CP2112_GPIO_SET;
buf[1] = value ? 0xff : 0;
buf[2] = 1 << offset;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf,
CP2112_GPIO_SET_LENGTH, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
if (ret < 0)
hid_err(hdev, "error setting GPIO values: %d\n", ret);
mutex_unlock(&dev->lock);
}
static int cp2112_gpio_get_all(struct gpio_chip *chip)
{
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
int ret;
mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf,
CP2112_GPIO_GET_LENGTH, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret != CP2112_GPIO_GET_LENGTH) {
hid_err(hdev, "error requesting GPIO values: %d\n", ret);
ret = ret < 0 ? ret : -EIO;
goto exit;
}
ret = buf[1];
exit:
mutex_unlock(&dev->lock);
return ret;
}
static int cp2112_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
int ret;
ret = cp2112_gpio_get_all(chip);
if (ret < 0)
return ret;
return (ret >> offset) & 1;
}
static int cp2112_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
int ret;
mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret != CP2112_GPIO_CONFIG_LENGTH) {
hid_err(hdev, "error requesting GPIO config: %d\n", ret);
goto fail;
}
buf[1] |= 1 << offset;
buf[2] = gpio_push_pull;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
if (ret < 0) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
goto fail;
}
mutex_unlock(&dev->lock);
/*
* Set gpio value when output direction is already set,
* as specified in AN495, Rev. 0.2, cpt. 4.4
*/
cp2112_gpio_set(chip, offset, value);
return 0;
fail:
mutex_unlock(&dev->lock);
return ret < 0 ? ret : -EIO;
}
static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
u8 *data, size_t count, unsigned char report_type)
{
u8 *buf;
int ret;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = hid_hw_raw_request(hdev, report_number, buf, count,
report_type, HID_REQ_GET_REPORT);
memcpy(data, buf, count);
kfree(buf);
return ret;
}
static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count,
unsigned char report_type)
{
u8 *buf;
int ret;
buf = kmemdup(data, count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (report_type == HID_OUTPUT_REPORT)
ret = hid_hw_output_report(hdev, buf, count);
else
ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type,
HID_REQ_SET_REPORT);
kfree(buf);
return ret;
}
static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
{
int ret = 0;
/* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
* CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
* come in cp2112_raw_event or timeout. There will only be one of these
* in flight at any one time. The timeout is extremely large and is a
* last resort if the CP2112 has died. If we do timeout we don't expect
* to receive the response which would cause data races, it's not like
* we can do anything about it anyway.
*/
ret = wait_event_interruptible_timeout(dev->wait,
atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT));
if (-ERESTARTSYS == ret)
return ret;
if (!ret)
return -ETIMEDOUT;
atomic_set(avail, 0);
return 0;
}
static int cp2112_xfer_status(struct cp2112_device *dev)
{
struct hid_device *hdev = dev->hdev;
u8 buf[2];
int ret;
buf[0] = CP2112_TRANSFER_STATUS_REQUEST;
buf[1] = 0x01;
atomic_set(&dev->xfer_avail, 0);
ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error requesting status: %d\n", ret);
return ret;
}
ret = cp2112_wait(dev, &dev->xfer_avail);
if (ret)
return ret;
return dev->xfer_status;
}
static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size)
{
struct hid_device *hdev = dev->hdev;
struct cp2112_force_read_report report;
int ret;
if (size > sizeof(dev->read_data))
size = sizeof(dev->read_data);
report.report = CP2112_DATA_READ_FORCE_SEND;
report.length = cpu_to_be16(size);
atomic_set(&dev->read_avail, 0);
ret = cp2112_hid_output(hdev, &report.report, sizeof(report),
HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error requesting data: %d\n", ret);
return ret;
}
ret = cp2112_wait(dev, &dev->read_avail);
if (ret)
return ret;
hid_dbg(hdev, "read %d of %zd bytes requested\n",
dev->read_length, size);
if (size > dev->read_length)
size = dev->read_length;
memcpy(data, dev->read_data, size);
return dev->read_length;
}
static int cp2112_read_req(void *buf, u8 slave_address, u16 length)
{
struct cp2112_read_req_report *report = buf;
if (length < 1 || length > 512)
return -EINVAL;
report->report = CP2112_DATA_READ_REQUEST;
report->slave_address = slave_address << 1;
report->length = cpu_to_be16(length);
return sizeof(*report);
}
static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length,
u8 command, u8 *data, u8 data_length)
{
struct cp2112_write_read_req_report *report = buf;
if (length < 1 || length > 512
|| data_length > sizeof(report->target_address) - 1)
return -EINVAL;
report->report = CP2112_DATA_WRITE_READ_REQUEST;
report->slave_address = slave_address << 1;
report->length = cpu_to_be16(length);
report->target_address_length = data_length + 1;
report->target_address[0] = command;
memcpy(&report->target_address[1], data, data_length);
return data_length + 6;
}
static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data,
u8 data_length)
{
struct cp2112_write_req_report *report = buf;
if (data_length > sizeof(report->data) - 1)
return -EINVAL;
report->report = CP2112_DATA_WRITE_REQUEST;
report->slave_address = slave_address << 1;
report->length = data_length + 1;
report->data[0] = command;
memcpy(&report->data[1], data, data_length);
return data_length + 4;
}
static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data,
u8 data_length)
{
struct cp2112_write_req_report *report = buf;
if (data_length > sizeof(report->data))
return -EINVAL;
report->report = CP2112_DATA_WRITE_REQUEST;
report->slave_address = slave_address << 1;
report->length = data_length;
memcpy(report->data, data, data_length);
return data_length + 3;
}
static int cp2112_i2c_write_read_req(void *buf, u8 slave_address,
u8 *addr, int addr_length,
int read_length)
{
struct cp2112_write_read_req_report *report = buf;
if (read_length < 1 || read_length > 512 ||
addr_length > sizeof(report->target_address))
return -EINVAL;
report->report = CP2112_DATA_WRITE_READ_REQUEST;
report->slave_address = slave_address << 1;
report->length = cpu_to_be16(read_length);
report->target_address_length = addr_length;
memcpy(report->target_address, addr, addr_length);
return addr_length + 5;
}
static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
struct hid_device *hdev = dev->hdev;
u8 buf[64];
ssize_t count;
ssize_t read_length = 0;
u8 *read_buf = NULL;
unsigned int retries;
int ret;
hid_dbg(hdev, "I2C %d messages\n", num);
if (num == 1) {
if (msgs->flags & I2C_M_RD) {
hid_dbg(hdev, "I2C read %#04x len %d\n",
msgs->addr, msgs->len);
read_length = msgs->len;
read_buf = msgs->buf;
count = cp2112_read_req(buf, msgs->addr, msgs->len);
} else {
hid_dbg(hdev, "I2C write %#04x len %d\n",
msgs->addr, msgs->len);
count = cp2112_i2c_write_req(buf, msgs->addr,
msgs->buf, msgs->len);
}
if (count < 0)
return count;
} else if (dev->hwversion > 1 && /* no repeated start in rev 1 */
num == 2 &&
msgs[0].addr == msgs[1].addr &&
!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD)) {
hid_dbg(hdev, "I2C write-read %#04x wlen %d rlen %d\n",
msgs[0].addr, msgs[0].len, msgs[1].len);
read_length = msgs[1].len;
read_buf = msgs[1].buf;
count = cp2112_i2c_write_read_req(buf, msgs[0].addr,
msgs[0].buf, msgs[0].len, msgs[1].len);
if (count < 0)
return count;
} else {
hid_err(hdev,
"Multi-message I2C transactions not supported\n");
return -EOPNOTSUPP;
}
ret = hid_hw_power(hdev, PM_HINT_FULLON);
if (ret < 0) {
hid_err(hdev, "power management error: %d\n", ret);
return ret;
}
ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error starting transaction: %d\n", ret);
goto power_normal;
}
for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
ret = cp2112_xfer_status(dev);
if (-EBUSY == ret)
continue;
if (ret < 0)
goto power_normal;
break;
}
if (XFER_STATUS_RETRIES <= retries) {
hid_warn(hdev, "Transfer timed out, cancelling.\n");
buf[0] = CP2112_CANCEL_TRANSFER;
buf[1] = 0x01;
ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
if (ret < 0)
hid_warn(hdev, "Error cancelling transaction: %d\n",
ret);
ret = -ETIMEDOUT;
goto power_normal;
}
for (count = 0; count < read_length;) {
ret = cp2112_read(dev, read_buf + count, read_length - count);
if (ret < 0)
goto power_normal;
if (ret == 0) {
hid_err(hdev, "read returned 0\n");
ret = -EIO;
goto power_normal;
}
count += ret;
if (count > read_length) {
/*
* The hardware returned too much data.
* This is mostly harmless because cp2112_read()
* has a limit check so didn't overrun our
* buffer. Nevertheless, we return an error
* because something is seriously wrong and
* it shouldn't go unnoticed.
*/
hid_err(hdev, "long read: %d > %zd\n",
ret, read_length - count + ret);
ret = -EIO;
goto power_normal;
}
}
/* return the number of transferred messages */
ret = num;
power_normal:
hid_hw_power(hdev, PM_HINT_NORMAL);
hid_dbg(hdev, "I2C transfer finished: %d\n", ret);
return ret;
}
static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
struct hid_device *hdev = dev->hdev;
u8 buf[64];
__le16 word;
ssize_t count;
size_t read_length = 0;
unsigned int retries;
int ret;
hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
read_write == I2C_SMBUS_WRITE ? "write" : "read",
addr, flags, command, size);
switch (size) {
case I2C_SMBUS_BYTE:
read_length = 1;
if (I2C_SMBUS_READ == read_write)
count = cp2112_read_req(buf, addr, read_length);
else
count = cp2112_write_req(buf, addr, command, NULL,
0);
break;
case I2C_SMBUS_BYTE_DATA:
read_length = 1;
if (I2C_SMBUS_READ == read_write)
count = cp2112_write_read_req(buf, addr, read_length,
command, NULL, 0);
else
count = cp2112_write_req(buf, addr, command,
&data->byte, 1);
break;
case I2C_SMBUS_WORD_DATA:
read_length = 2;
word = cpu_to_le16(data->word);
if (I2C_SMBUS_READ == read_write)
count = cp2112_write_read_req(buf, addr, read_length,
command, NULL, 0);
else
count = cp2112_write_req(buf, addr, command,
(u8 *)&word, 2);
break;
case I2C_SMBUS_PROC_CALL:
size = I2C_SMBUS_WORD_DATA;
read_write = I2C_SMBUS_READ;
read_length = 2;
word = cpu_to_le16(data->word);
count = cp2112_write_read_req(buf, addr, read_length, command,
(u8 *)&word, 2);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
read_length = data->block[0];
count = cp2112_write_read_req(buf, addr, read_length,
command, NULL, 0);
} else {
count = cp2112_write_req(buf, addr, command,
data->block + 1,
data->block[0]);
}
break;
case I2C_SMBUS_BLOCK_DATA:
if (I2C_SMBUS_READ == read_write) {
count = cp2112_write_read_req(buf, addr,
I2C_SMBUS_BLOCK_MAX,
command, NULL, 0);
} else {
count = cp2112_write_req(buf, addr, command,
data->block,
data->block[0] + 1);
}
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
size = I2C_SMBUS_BLOCK_DATA;
read_write = I2C_SMBUS_READ;
count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX,
command, data->block,
data->block[0] + 1);
break;
default:
hid_warn(hdev, "Unsupported transaction %d\n", size);
return -EOPNOTSUPP;
}
if (count < 0)
return count;
ret = hid_hw_power(hdev, PM_HINT_FULLON);
if (ret < 0) {
hid_err(hdev, "power management error: %d\n", ret);
return ret;
}
ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error starting transaction: %d\n", ret);
goto power_normal;
}
for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
ret = cp2112_xfer_status(dev);
if (-EBUSY == ret)
continue;
if (ret < 0)
goto power_normal;
break;
}
if (XFER_STATUS_RETRIES <= retries) {
hid_warn(hdev, "Transfer timed out, cancelling.\n");
buf[0] = CP2112_CANCEL_TRANSFER;
buf[1] = 0x01;
ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
if (ret < 0)
hid_warn(hdev, "Error cancelling transaction: %d\n",
ret);
ret = -ETIMEDOUT;
goto power_normal;
}
if (I2C_SMBUS_WRITE == read_write) {
ret = 0;
goto power_normal;
}
if (I2C_SMBUS_BLOCK_DATA == size)
read_length = ret;
ret = cp2112_read(dev, buf, read_length);
if (ret < 0)
goto power_normal;
if (ret != read_length) {
hid_warn(hdev, "short read: %d < %zd\n", ret, read_length);
ret = -EIO;
goto power_normal;
}
switch (size) {
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
data->byte = buf[0];
break;
case I2C_SMBUS_WORD_DATA:
data->word = le16_to_cpup((__le16 *)buf);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
memcpy(data->block + 1, buf, read_length);
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_length > I2C_SMBUS_BLOCK_MAX) {
ret = -EPROTO;
goto power_normal;
}
memcpy(data->block, buf, read_length);
break;
}
ret = 0;
power_normal:
hid_hw_power(hdev, PM_HINT_NORMAL);
hid_dbg(hdev, "transfer finished: %d\n", ret);
return ret;
}
static u32 cp2112_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C |
I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK |
I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
}
static const struct i2c_algorithm smbus_algorithm = {
.master_xfer = cp2112_i2c_xfer,
.smbus_xfer = cp2112_xfer,
.functionality = cp2112_functionality,
};
static int cp2112_get_usb_config(struct hid_device *hdev,
struct cp2112_usb_config_report *cfg)
{
int ret;
ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg),
HID_FEATURE_REPORT);
if (ret != sizeof(*cfg)) {
hid_err(hdev, "error reading usb config: %d\n", ret);
if (ret < 0)
return ret;
return -EIO;
}
return 0;
}
static int cp2112_set_usb_config(struct hid_device *hdev,
struct cp2112_usb_config_report *cfg)
{
int ret;
BUG_ON(cfg->report != CP2112_USB_CONFIG);
ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg),
HID_FEATURE_REPORT);
if (ret != sizeof(*cfg)) {
hid_err(hdev, "error writing usb config: %d\n", ret);
if (ret < 0)
return ret;
return -EIO;
}
return 0;
}
static void chmod_sysfs_attrs(struct hid_device *hdev);
#define CP2112_CONFIG_ATTR(name, store, format, ...) \
static ssize_t name##_store(struct device *kdev, \
struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct hid_device *hdev = to_hid_device(kdev); \
struct cp2112_usb_config_report cfg; \
int ret = cp2112_get_usb_config(hdev, &cfg); \
if (ret) \
return ret; \
store; \
ret = cp2112_set_usb_config(hdev, &cfg); \
if (ret) \
return ret; \
chmod_sysfs_attrs(hdev); \
return count; \
} \
static ssize_t name##_show(struct device *kdev, \
struct device_attribute *attr, char *buf) \
{ \
struct hid_device *hdev = to_hid_device(kdev); \
struct cp2112_usb_config_report cfg; \
int ret = cp2112_get_usb_config(hdev, &cfg); \
if (ret) \
return ret; \
return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
} \
static DEVICE_ATTR_RW(name);
CP2112_CONFIG_ATTR(vendor_id, ({
u16 vid;
if (sscanf(buf, "%hi", &vid) != 1)
return -EINVAL;
cfg.vid = cpu_to_le16(vid);
cfg.mask = 0x01;
}), "0x%04x\n", le16_to_cpu(cfg.vid));
CP2112_CONFIG_ATTR(product_id, ({
u16 pid;
if (sscanf(buf, "%hi", &pid) != 1)
return -EINVAL;
cfg.pid = cpu_to_le16(pid);
cfg.mask = 0x02;
}), "0x%04x\n", le16_to_cpu(cfg.pid));
CP2112_CONFIG_ATTR(max_power, ({
int mA;
if (sscanf(buf, "%i", &mA) != 1)
return -EINVAL;
cfg.max_power = (mA + 1) / 2;
cfg.mask = 0x04;
}), "%u mA\n", cfg.max_power * 2);
CP2112_CONFIG_ATTR(power_mode, ({
if (sscanf(buf, "%hhi", &cfg.power_mode) != 1)
return -EINVAL;
cfg.mask = 0x08;
}), "%u\n", cfg.power_mode);
CP2112_CONFIG_ATTR(release_version, ({
if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor)
!= 2)
return -EINVAL;
cfg.mask = 0x10;
}), "%u.%u\n", cfg.release_major, cfg.release_minor);
#undef CP2112_CONFIG_ATTR
struct cp2112_pstring_attribute {
struct device_attribute attr;
unsigned char report;
};
static ssize_t pstr_store(struct device *kdev,
struct device_attribute *kattr, const char *buf,
size_t count)
{
struct hid_device *hdev = to_hid_device(kdev);
struct cp2112_pstring_attribute *attr =
container_of(kattr, struct cp2112_pstring_attribute, attr);
struct cp2112_string_report report;
int ret;
memset(&report, 0, sizeof(report));
ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN,
report.string, ARRAY_SIZE(report.string));
report.report = attr->report;
report.length = ret * sizeof(report.string[0]) + 2;
report.type = USB_DT_STRING;
ret = cp2112_hid_output(hdev, &report.report, report.length + 1,
HID_FEATURE_REPORT);
if (ret != report.length + 1) {
hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name,
ret);
if (ret < 0)
return ret;
return -EIO;
}
chmod_sysfs_attrs(hdev);
return count;
}
static ssize_t pstr_show(struct device *kdev,
struct device_attribute *kattr, char *buf)
{
struct hid_device *hdev = to_hid_device(kdev);
struct cp2112_pstring_attribute *attr =
container_of(kattr, struct cp2112_pstring_attribute, attr);
struct cp2112_string_report report;
u8 length;
int ret;
ret = cp2112_hid_get(hdev, attr->report, &report.report,
sizeof(report) - 1, HID_FEATURE_REPORT);
if (ret < 3) {
hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name,
ret);
if (ret < 0)
return ret;
return -EIO;
}
if (report.length < 2) {
hid_err(hdev, "invalid %s string length: %d\n",
kattr->attr.name, report.length);
return -EIO;
}
length = report.length > ret - 1 ? ret - 1 : report.length;
length = (length - 2) / sizeof(report.string[0]);
ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf,
PAGE_SIZE - 1);
buf[ret++] = '\n';
return ret;
}
#define CP2112_PSTR_ATTR(name, _report) \
static struct cp2112_pstring_attribute dev_attr_##name = { \
.attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
.report = _report, \
};
CP2112_PSTR_ATTR(manufacturer, CP2112_MANUFACTURER_STRING);
CP2112_PSTR_ATTR(product, CP2112_PRODUCT_STRING);
CP2112_PSTR_ATTR(serial, CP2112_SERIAL_STRING);
#undef CP2112_PSTR_ATTR
static const struct attribute_group cp2112_attr_group = {
.attrs = (struct attribute *[]){
&dev_attr_vendor_id.attr,
&dev_attr_product_id.attr,
&dev_attr_max_power.attr,
&dev_attr_power_mode.attr,
&dev_attr_release_version.attr,
&dev_attr_manufacturer.attr.attr,
&dev_attr_product.attr.attr,
&dev_attr_serial.attr.attr,
NULL
}
};
/* Chmoding our sysfs attributes is simply a way to expose which fields in the
* PROM have already been programmed. We do not depend on this preventing
* writing to these attributes since the CP2112 will simply ignore writes to
* already-programmed fields. This is why there is no sense in fixing this
* racy behaviour.
*/
static void chmod_sysfs_attrs(struct hid_device *hdev)
{
struct attribute **attr;
u8 buf[2];
int ret;
ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf),
HID_FEATURE_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error reading lock byte: %d\n", ret);
return;
}
for (attr = cp2112_attr_group.attrs; *attr; ++attr) {
umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO;
ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode);
if (ret < 0)
hid_err(hdev, "error chmoding sysfs file %s\n",
(*attr)->name);
buf[1] >>= 1;
}
}
static void cp2112_gpio_irq_ack(struct irq_data *d)
{
}
static void cp2112_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
__clear_bit(d->hwirq, &dev->irq_mask);
}
static void cp2112_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
__set_bit(d->hwirq, &dev->irq_mask);
}
static void cp2112_gpio_poll_callback(struct work_struct *work)
{
struct cp2112_device *dev = container_of(work, struct cp2112_device,
gpio_poll_worker.work);
struct irq_data *d;
u8 gpio_mask;
u8 virqs = (u8)dev->irq_mask;
u32 irq_type;
int irq, virq, ret;
ret = cp2112_gpio_get_all(&dev->gc);
if (ret == -ENODEV) /* the hardware has been disconnected */
return;
if (ret < 0)
goto exit;
gpio_mask = ret;
while (virqs) {
virq = ffs(virqs) - 1;
virqs &= ~BIT(virq);
if (!dev->gc.to_irq)
break;
irq = dev->gc.to_irq(&dev->gc, virq);
d = irq_get_irq_data(irq);
if (!d)
continue;
irq_type = irqd_get_trigger_type(d);
if (gpio_mask & BIT(virq)) {
/* Level High */
if (irq_type & IRQ_TYPE_LEVEL_HIGH)
handle_nested_irq(irq);
if ((irq_type & IRQ_TYPE_EDGE_RISING) &&
!(dev->gpio_prev_state & BIT(virq)))
handle_nested_irq(irq);
} else {
/* Level Low */
if (irq_type & IRQ_TYPE_LEVEL_LOW)
handle_nested_irq(irq);
if ((irq_type & IRQ_TYPE_EDGE_FALLING) &&
(dev->gpio_prev_state & BIT(virq)))
handle_nested_irq(irq);
}
}
dev->gpio_prev_state = gpio_mask;
exit:
if (dev->gpio_poll)
schedule_delayed_work(&dev->gpio_poll_worker, 10);
}
static unsigned int cp2112_gpio_irq_startup(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
INIT_DELAYED_WORK(&dev->gpio_poll_worker, cp2112_gpio_poll_callback);
cp2112_gpio_direction_input(gc, d->hwirq);
if (!dev->gpio_poll) {
dev->gpio_poll = true;
schedule_delayed_work(&dev->gpio_poll_worker, 0);
}
cp2112_gpio_irq_unmask(d);
return 0;
}
static void cp2112_gpio_irq_shutdown(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
cancel_delayed_work_sync(&dev->gpio_poll_worker);
}
static int cp2112_gpio_irq_type(struct irq_data *d, unsigned int type)
{
return 0;
}
static struct irq_chip cp2112_gpio_irqchip = {
.name = "cp2112-gpio",
.irq_startup = cp2112_gpio_irq_startup,
.irq_shutdown = cp2112_gpio_irq_shutdown,
.irq_ack = cp2112_gpio_irq_ack,
.irq_mask = cp2112_gpio_irq_mask,
.irq_unmask = cp2112_gpio_irq_unmask,
.irq_set_type = cp2112_gpio_irq_type,
};
static int __maybe_unused cp2112_allocate_irq(struct cp2112_device *dev,
int pin)
{
int ret;
if (dev->desc[pin])
return -EINVAL;
dev->desc[pin] = gpiochip_request_own_desc(&dev->gc, pin,
"HID/I2C:Event",
GPIO_ACTIVE_HIGH,
GPIOD_IN);
if (IS_ERR(dev->desc[pin])) {
dev_err(dev->gc.parent, "Failed to request GPIO\n");
return PTR_ERR(dev->desc[pin]);
}
ret = gpiochip_lock_as_irq(&dev->gc, pin);
if (ret) {
dev_err(dev->gc.parent, "Failed to lock GPIO as interrupt\n");
goto err_desc;
}
ret = gpiod_to_irq(dev->desc[pin]);
if (ret < 0) {
dev_err(dev->gc.parent, "Failed to translate GPIO to IRQ\n");
goto err_lock;
}
return ret;
err_lock:
gpiochip_unlock_as_irq(&dev->gc, pin);
err_desc:
gpiochip_free_own_desc(dev->desc[pin]);
dev->desc[pin] = NULL;
return ret;
}
static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct cp2112_device *dev;
u8 buf[3];
struct cp2112_smbus_config_report config;
int ret;
dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->in_out_buffer = devm_kzalloc(&hdev->dev, CP2112_REPORT_MAX_LENGTH,
GFP_KERNEL);
if (!dev->in_out_buffer)
return -ENOMEM;
mutex_init(&dev->lock);
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
return ret;
}
ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
if (ret) {
hid_err(hdev, "hw start failed\n");
return ret;
}
ret = hid_hw_open(hdev);
if (ret) {
hid_err(hdev, "hw open failed\n");
goto err_hid_stop;
}
ret = hid_hw_power(hdev, PM_HINT_FULLON);
if (ret < 0) {
hid_err(hdev, "power management error: %d\n", ret);
goto err_hid_close;
}
ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
HID_FEATURE_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error requesting version\n");
if (ret >= 0)
ret = -EIO;
goto err_power_normal;
}
hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
buf[1], buf[2]);
ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config,
sizeof(config), HID_FEATURE_REPORT);
if (ret != sizeof(config)) {
hid_err(hdev, "error requesting SMBus config\n");
if (ret >= 0)
ret = -EIO;
goto err_power_normal;
}
config.retry_time = cpu_to_be16(1);
ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config),
HID_FEATURE_REPORT);
if (ret != sizeof(config)) {
hid_err(hdev, "error setting SMBus config\n");
if (ret >= 0)
ret = -EIO;
goto err_power_normal;
}
hid_set_drvdata(hdev, (void *)dev);
dev->hdev = hdev;
dev->adap.owner = THIS_MODULE;
dev->adap.class = I2C_CLASS_HWMON;
dev->adap.algo = &smbus_algorithm;
dev->adap.algo_data = dev;
dev->adap.dev.parent = &hdev->dev;
snprintf(dev->adap.name, sizeof(dev->adap.name),
"CP2112 SMBus Bridge on hidraw%d",
((struct hidraw *)hdev->hidraw)->minor);
dev->hwversion = buf[2];
init_waitqueue_head(&dev->wait);
hid_device_io_start(hdev);
ret = i2c_add_adapter(&dev->adap);
hid_device_io_stop(hdev);
if (ret) {
hid_err(hdev, "error registering i2c adapter\n");
goto err_power_normal;
}
hid_dbg(hdev, "adapter registered\n");
dev->gc.label = "cp2112_gpio";
dev->gc.direction_input = cp2112_gpio_direction_input;
dev->gc.direction_output = cp2112_gpio_direction_output;
dev->gc.set = cp2112_gpio_set;
dev->gc.get = cp2112_gpio_get;
dev->gc.base = -1;
dev->gc.ngpio = 8;
dev->gc.can_sleep = 1;
dev->gc.parent = &hdev->dev;
ret = gpiochip_add_data(&dev->gc, dev);
if (ret < 0) {
hid_err(hdev, "error registering gpio chip\n");
goto err_free_i2c;
}
ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group);
if (ret < 0) {
hid_err(hdev, "error creating sysfs attrs\n");
goto err_gpiochip_remove;
}
chmod_sysfs_attrs(hdev);
hid_hw_power(hdev, PM_HINT_NORMAL);
ret = gpiochip_irqchip_add(&dev->gc, &cp2112_gpio_irqchip, 0,
handle_simple_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(dev->gc.parent, "failed to add IRQ chip\n");
goto err_sysfs_remove;
}
return ret;
err_sysfs_remove:
sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
err_gpiochip_remove:
gpiochip_remove(&dev->gc);
err_free_i2c:
i2c_del_adapter(&dev->adap);
err_power_normal:
hid_hw_power(hdev, PM_HINT_NORMAL);
err_hid_close:
hid_hw_close(hdev);
err_hid_stop:
hid_hw_stop(hdev);
return ret;
}
static void cp2112_remove(struct hid_device *hdev)
{
struct cp2112_device *dev = hid_get_drvdata(hdev);
int i;
sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
i2c_del_adapter(&dev->adap);
if (dev->gpio_poll) {
dev->gpio_poll = false;
cancel_delayed_work_sync(&dev->gpio_poll_worker);
}
for (i = 0; i < ARRAY_SIZE(dev->desc); i++) {
gpiochip_unlock_as_irq(&dev->gc, i);
gpiochip_free_own_desc(dev->desc[i]);
}
gpiochip_remove(&dev->gc);
/* i2c_del_adapter has finished removing all i2c devices from our
* adapter. Well behaved devices should no longer call our cp2112_xfer
* and should have waited for any pending calls to finish. It has also
* waited for device_unregister(&adap->dev) to complete. Therefore we
* can safely free our struct cp2112_device.
*/
hid_hw_close(hdev);
hid_hw_stop(hdev);
}
static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
struct cp2112_device *dev = hid_get_drvdata(hdev);
struct cp2112_xfer_status_report *xfer = (void *)data;
switch (data[0]) {
case CP2112_TRANSFER_STATUS_RESPONSE:
hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
xfer->status0, xfer->status1,
be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length));
switch (xfer->status0) {
case STATUS0_IDLE:
dev->xfer_status = -EAGAIN;
break;
case STATUS0_BUSY:
dev->xfer_status = -EBUSY;
break;
case STATUS0_COMPLETE:
dev->xfer_status = be16_to_cpu(xfer->length);
break;
case STATUS0_ERROR:
switch (xfer->status1) {
case STATUS1_TIMEOUT_NACK:
case STATUS1_TIMEOUT_BUS:
dev->xfer_status = -ETIMEDOUT;
break;
default:
dev->xfer_status = -EIO;
break;
}
break;
default:
dev->xfer_status = -EINVAL;
break;
}
atomic_set(&dev->xfer_avail, 1);
break;
case CP2112_DATA_READ_RESPONSE:
hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
dev->read_length = data[2];
if (dev->read_length > sizeof(dev->read_data))
dev->read_length = sizeof(dev->read_data);
memcpy(dev->read_data, &data[3], dev->read_length);
atomic_set(&dev->read_avail, 1);
break;
default:
hid_err(hdev, "unknown report\n");
return 0;
}
wake_up_interruptible(&dev->wait);
return 1;
}
static struct hid_driver cp2112_driver = {
.name = "cp2112",
.id_table = cp2112_devices,
.probe = cp2112_probe,
.remove = cp2112_remove,
.raw_event = cp2112_raw_event,
};
module_hid_driver(cp2112_driver);
MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
MODULE_LICENSE("GPL");