alistair23-linux/drivers/iio/dac/max517.c
Alexandru Ardelean d3be83244c iio: remove explicit IIO device parent assignment
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
   I = devm_iio_device_alloc(P, SP);
   ...
-  I->dev.parent = P;

It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'

But this is is only done in case where the block is left empty.

The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.

However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14 11:49:59 +01:00

222 lines
4.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* max517.c - Support for Maxim MAX517, MAX518 and MAX519
*
* Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/dac/max517.h>
#define MAX517_DRV_NAME "max517"
/* Commands */
#define COMMAND_CHANNEL0 0x00
#define COMMAND_CHANNEL1 0x01 /* for MAX518 and MAX519 */
#define COMMAND_PD 0x08 /* Power Down */
enum max517_device_ids {
ID_MAX517,
ID_MAX518,
ID_MAX519,
ID_MAX520,
ID_MAX521,
};
struct max517_data {
struct i2c_client *client;
unsigned short vref_mv[8];
};
/*
* channel: bit 0: channel 1
* bit 1: channel 2
* (this way, it's possible to set both channels at once)
*/
static int max517_set_value(struct iio_dev *indio_dev,
long val, int channel)
{
struct max517_data *data = iio_priv(indio_dev);
struct i2c_client *client = data->client;
u8 outbuf[2];
int res;
if (val < 0 || val > 255)
return -EINVAL;
outbuf[0] = channel;
outbuf[1] = val;
res = i2c_master_send(client, outbuf, 2);
if (res < 0)
return res;
else if (res != 2)
return -EIO;
else
return 0;
}
static int max517_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long m)
{
struct max517_data *data = iio_priv(indio_dev);
switch (m) {
case IIO_CHAN_INFO_SCALE:
/* Corresponds to Vref / 2^(bits) */
*val = data->vref_mv[chan->channel];
*val2 = 8;
return IIO_VAL_FRACTIONAL_LOG2;
default:
break;
}
return -EINVAL;
}
static int max517_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = max517_set_value(indio_dev, val, chan->channel);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int __maybe_unused max517_suspend(struct device *dev)
{
u8 outbuf = COMMAND_PD;
return i2c_master_send(to_i2c_client(dev), &outbuf, 1);
}
static int __maybe_unused max517_resume(struct device *dev)
{
u8 outbuf = 0;
return i2c_master_send(to_i2c_client(dev), &outbuf, 1);
}
static SIMPLE_DEV_PM_OPS(max517_pm_ops, max517_suspend, max517_resume);
static const struct iio_info max517_info = {
.read_raw = max517_read_raw,
.write_raw = max517_write_raw,
};
#define MAX517_CHANNEL(chan) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
.channel = (chan), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
}
static const struct iio_chan_spec max517_channels[] = {
MAX517_CHANNEL(0),
MAX517_CHANNEL(1),
MAX517_CHANNEL(2),
MAX517_CHANNEL(3),
MAX517_CHANNEL(4),
MAX517_CHANNEL(5),
MAX517_CHANNEL(6),
MAX517_CHANNEL(7),
};
static int max517_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max517_data *data;
struct iio_dev *indio_dev;
struct max517_platform_data *platform_data = client->dev.platform_data;
int chan;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
switch (id->driver_data) {
case ID_MAX521:
indio_dev->num_channels = 8;
break;
case ID_MAX520:
indio_dev->num_channels = 4;
break;
case ID_MAX519:
case ID_MAX518:
indio_dev->num_channels = 2;
break;
default: /* single channel for MAX517 */
indio_dev->num_channels = 1;
break;
}
indio_dev->channels = max517_channels;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &max517_info;
/*
* Reference voltage on MAX518 and default is 5V, else take vref_mv
* from platform_data
*/
for (chan = 0; chan < indio_dev->num_channels; chan++) {
if (id->driver_data == ID_MAX518 || !platform_data)
data->vref_mv[chan] = 5000; /* mV */
else
data->vref_mv[chan] = platform_data->vref_mv[chan];
}
return iio_device_register(indio_dev);
}
static int max517_remove(struct i2c_client *client)
{
iio_device_unregister(i2c_get_clientdata(client));
return 0;
}
static const struct i2c_device_id max517_id[] = {
{ "max517", ID_MAX517 },
{ "max518", ID_MAX518 },
{ "max519", ID_MAX519 },
{ "max520", ID_MAX520 },
{ "max521", ID_MAX521 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max517_id);
static struct i2c_driver max517_driver = {
.driver = {
.name = MAX517_DRV_NAME,
.pm = &max517_pm_ops,
},
.probe = max517_probe,
.remove = max517_remove,
.id_table = max517_id,
};
module_i2c_driver(max517_driver);
MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
MODULE_DESCRIPTION("MAX517/518/519/520/521 8-bit DAC");
MODULE_LICENSE("GPL");