![Jianguo Sun](/assets/img/avatar_default.png)
Add combo phy driver for HiSilicon STB SoCs. This phy can be used as pcie-phy, sata-phy or usb-phy. Changes for v5: - Add bindings doc for Hi3798CV200 peripheral controller, and refer to the bindings of this parent node in combphy bindings doc. Changes for v4: - Instead of relying on device id, add a new property hisilicon,fixed-mode for combphy device that doesn't support mode select but a fixed phy mode. - Move combphy mode select register bits definition to device tree, as it may vary from one device to another. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
290 lines
6.9 KiB
C
290 lines
6.9 KiB
C
/*
|
|
* COMBPHY driver for HiSilicon STB SoCs
|
|
*
|
|
* Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com
|
|
*
|
|
* Authors: Jianguo Sun <sunjianguo1@huawei.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#define COMBPHY_MODE_PCIE 0
|
|
#define COMBPHY_MODE_USB3 1
|
|
#define COMBPHY_MODE_SATA 2
|
|
|
|
#define COMBPHY_CFG_REG 0x0
|
|
#define COMBPHY_BYPASS_CODEC BIT(31)
|
|
#define COMBPHY_TEST_WRITE BIT(24)
|
|
#define COMBPHY_TEST_DATA_SHIFT 20
|
|
#define COMBPHY_TEST_DATA_MASK GENMASK(23, 20)
|
|
#define COMBPHY_TEST_ADDR_SHIFT 12
|
|
#define COMBPHY_TEST_ADDR_MASK GENMASK(16, 12)
|
|
#define COMBPHY_CLKREF_OUT_OEN BIT(0)
|
|
|
|
struct histb_combphy_mode {
|
|
int fixed;
|
|
int select;
|
|
u32 reg;
|
|
u32 shift;
|
|
u32 mask;
|
|
};
|
|
|
|
struct histb_combphy_priv {
|
|
void __iomem *mmio;
|
|
struct regmap *syscon;
|
|
struct reset_control *por_rst;
|
|
struct clk *ref_clk;
|
|
struct phy *phy;
|
|
struct histb_combphy_mode mode;
|
|
};
|
|
|
|
static void nano_register_write(struct histb_combphy_priv *priv,
|
|
u32 addr, u32 data)
|
|
{
|
|
void __iomem *reg = priv->mmio + COMBPHY_CFG_REG;
|
|
u32 val;
|
|
|
|
/* Set up address and data for the write */
|
|
val = readl(reg);
|
|
val &= ~COMBPHY_TEST_ADDR_MASK;
|
|
val |= addr << COMBPHY_TEST_ADDR_SHIFT;
|
|
val &= ~COMBPHY_TEST_DATA_MASK;
|
|
val |= data << COMBPHY_TEST_DATA_SHIFT;
|
|
writel(val, reg);
|
|
|
|
/* Flip strobe control to trigger the write */
|
|
val &= ~COMBPHY_TEST_WRITE;
|
|
writel(val, reg);
|
|
val |= COMBPHY_TEST_WRITE;
|
|
writel(val, reg);
|
|
}
|
|
|
|
static int is_mode_fixed(struct histb_combphy_mode *mode)
|
|
{
|
|
return (mode->fixed != PHY_NONE) ? true : false;
|
|
}
|
|
|
|
static int histb_combphy_set_mode(struct histb_combphy_priv *priv)
|
|
{
|
|
struct histb_combphy_mode *mode = &priv->mode;
|
|
struct regmap *syscon = priv->syscon;
|
|
u32 hw_sel;
|
|
|
|
if (is_mode_fixed(mode))
|
|
return 0;
|
|
|
|
switch (mode->select) {
|
|
case PHY_TYPE_SATA:
|
|
hw_sel = COMBPHY_MODE_SATA;
|
|
break;
|
|
case PHY_TYPE_PCIE:
|
|
hw_sel = COMBPHY_MODE_PCIE;
|
|
break;
|
|
case PHY_TYPE_USB3:
|
|
hw_sel = COMBPHY_MODE_USB3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(syscon, mode->reg, mode->mask,
|
|
hw_sel << mode->shift);
|
|
}
|
|
|
|
static int histb_combphy_init(struct phy *phy)
|
|
{
|
|
struct histb_combphy_priv *priv = phy_get_drvdata(phy);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = histb_combphy_set_mode(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Clear bypass bit to enable encoding/decoding */
|
|
val = readl(priv->mmio + COMBPHY_CFG_REG);
|
|
val &= ~COMBPHY_BYPASS_CODEC;
|
|
writel(val, priv->mmio + COMBPHY_CFG_REG);
|
|
|
|
ret = clk_prepare_enable(priv->ref_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reset_control_deassert(priv->por_rst);
|
|
|
|
/* Enable EP clock */
|
|
val = readl(priv->mmio + COMBPHY_CFG_REG);
|
|
val |= COMBPHY_CLKREF_OUT_OEN;
|
|
writel(val, priv->mmio + COMBPHY_CFG_REG);
|
|
|
|
/* Need to wait for EP clock stable */
|
|
mdelay(5);
|
|
|
|
/* Configure nano phy registers as suggested by vendor */
|
|
nano_register_write(priv, 0x1, 0x8);
|
|
nano_register_write(priv, 0xc, 0x9);
|
|
nano_register_write(priv, 0x1a, 0x4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int histb_combphy_exit(struct phy *phy)
|
|
{
|
|
struct histb_combphy_priv *priv = phy_get_drvdata(phy);
|
|
u32 val;
|
|
|
|
/* Disable EP clock */
|
|
val = readl(priv->mmio + COMBPHY_CFG_REG);
|
|
val &= ~COMBPHY_CLKREF_OUT_OEN;
|
|
writel(val, priv->mmio + COMBPHY_CFG_REG);
|
|
|
|
reset_control_assert(priv->por_rst);
|
|
clk_disable_unprepare(priv->ref_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops histb_combphy_ops = {
|
|
.init = histb_combphy_init,
|
|
.exit = histb_combphy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *histb_combphy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct histb_combphy_priv *priv = dev_get_drvdata(dev);
|
|
struct histb_combphy_mode *mode = &priv->mode;
|
|
|
|
if (args->args_count < 1) {
|
|
dev_err(dev, "invalid number of arguments\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
mode->select = args->args[0];
|
|
|
|
if (mode->select < PHY_TYPE_SATA || mode->select > PHY_TYPE_USB3) {
|
|
dev_err(dev, "invalid phy mode select argument\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (is_mode_fixed(mode) && mode->select != mode->fixed) {
|
|
dev_err(dev, "mode select %d mismatch fixed phy mode %d\n",
|
|
mode->select, mode->fixed);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
return priv->phy;
|
|
}
|
|
|
|
static int histb_combphy_probe(struct platform_device *pdev)
|
|
{
|
|
struct phy_provider *phy_provider;
|
|
struct device *dev = &pdev->dev;
|
|
struct histb_combphy_priv *priv;
|
|
struct device_node *np = dev->of_node;
|
|
struct histb_combphy_mode *mode;
|
|
struct resource *res;
|
|
u32 vals[3];
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->mmio = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->mmio)) {
|
|
ret = PTR_ERR(priv->mmio);
|
|
return ret;
|
|
}
|
|
|
|
priv->syscon = syscon_node_to_regmap(np->parent);
|
|
if (IS_ERR(priv->syscon)) {
|
|
dev_err(dev, "failed to find peri_ctrl syscon regmap\n");
|
|
return PTR_ERR(priv->syscon);
|
|
}
|
|
|
|
mode = &priv->mode;
|
|
mode->fixed = PHY_NONE;
|
|
|
|
ret = of_property_read_u32(np, "hisilicon,fixed-mode", &mode->fixed);
|
|
if (ret == 0)
|
|
dev_dbg(dev, "found fixed phy mode %d\n", mode->fixed);
|
|
|
|
ret = of_property_read_u32_array(np, "hisilicon,mode-select-bits",
|
|
vals, ARRAY_SIZE(vals));
|
|
if (ret == 0) {
|
|
if (is_mode_fixed(mode)) {
|
|
dev_err(dev, "found select bits for fixed mode phy\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mode->reg = vals[0];
|
|
mode->shift = vals[1];
|
|
mode->mask = vals[2];
|
|
dev_dbg(dev, "found mode select bits\n");
|
|
} else {
|
|
if (!is_mode_fixed(mode)) {
|
|
dev_err(dev, "no valid select bits found for non-fixed phy\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
priv->ref_clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->ref_clk)) {
|
|
dev_err(dev, "failed to find ref clock\n");
|
|
return PTR_ERR(priv->ref_clk);
|
|
}
|
|
|
|
priv->por_rst = devm_reset_control_get(dev, NULL);
|
|
if (IS_ERR(priv->por_rst)) {
|
|
dev_err(dev, "failed to get poweron reset\n");
|
|
return PTR_ERR(priv->por_rst);
|
|
}
|
|
|
|
priv->phy = devm_phy_create(dev, NULL, &histb_combphy_ops);
|
|
if (IS_ERR(priv->phy)) {
|
|
dev_err(dev, "failed to create combphy\n");
|
|
return PTR_ERR(priv->phy);
|
|
}
|
|
|
|
dev_set_drvdata(dev, priv);
|
|
phy_set_drvdata(priv->phy, priv);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, histb_combphy_xlate);
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id histb_combphy_of_match[] = {
|
|
{ .compatible = "hisilicon,hi3798cv200-combphy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, histb_combphy_of_match);
|
|
|
|
static struct platform_driver histb_combphy_driver = {
|
|
.probe = histb_combphy_probe,
|
|
.driver = {
|
|
.name = "combphy",
|
|
.of_match_table = histb_combphy_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(histb_combphy_driver);
|
|
|
|
MODULE_DESCRIPTION("HiSilicon STB COMBPHY driver");
|
|
MODULE_LICENSE("GPL v2");
|