alistair23-linux/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
Vivek Gautam 0b56e9a7e8 phy: Group vendor specific phy drivers
Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 15:28:33 +05:30

178 lines
8.2 KiB
C

/*
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef UFS_QCOM_PHY_QMP_14NM_H_
#define UFS_QCOM_PHY_QMP_14NM_H_
#include "phy-qcom-ufs-i.h"
/* QCOM UFS PHY control registers */
#define COM_OFF(x) (0x000 + x)
#define PHY_OFF(x) (0xC00 + x)
#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
/* UFS PHY QSERDES COM registers */
#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
/* UFS PHY registers */
#define UFS_PHY_PHY_START PHY_OFF(0x00)
#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
/* UFS PHY TX registers */
#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
/* UFS PHY RX registers */
#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
/*
* This structure represents the 14nm specific phy.
* common_cfg MUST remain the first field in this structure
* in case extra fields are added. This way, when calling
* get_ufs_qcom_phy() of generic phy, we can extract the
* common phy structure (struct ufs_qcom_phy) out of it
* regardless of the relevant specific phy.
*/
struct ufs_qcom_phy_qmp_14nm {
struct ufs_qcom_phy common_cfg;
};
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
};
static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
};
#endif