![Linus Walleij](/assets/img/avatar_default.png)
This implements device tree support for the AB3100 regulators driver. The initial settings are moved out of platform data and into the driver for the device tree case, as it appears that there is no way to supply this as AUXDATA for an I2C device. The style and bindings are heavily inspired by Lee Jones' style for AB8500. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1008 lines
22 KiB
C
1008 lines
22 KiB
C
/*
|
|
* Copyright (C) 2007-2010 ST-Ericsson
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
* Low-level core for exclusive access to the AB3100 IC on the I2C bus
|
|
* and some basic chip-configuration.
|
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/list.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/random.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/ab3100.h>
|
|
#include <linux/mfd/abx500.h>
|
|
|
|
/* These are the only registers inside AB3100 used in this main file */
|
|
|
|
/* Interrupt event registers */
|
|
#define AB3100_EVENTA1 0x21
|
|
#define AB3100_EVENTA2 0x22
|
|
#define AB3100_EVENTA3 0x23
|
|
|
|
/* AB3100 DAC converter registers */
|
|
#define AB3100_DIS 0x00
|
|
#define AB3100_D0C 0x01
|
|
#define AB3100_D1C 0x02
|
|
#define AB3100_D2C 0x03
|
|
#define AB3100_D3C 0x04
|
|
|
|
/* Chip ID register */
|
|
#define AB3100_CID 0x20
|
|
|
|
/* AB3100 interrupt registers */
|
|
#define AB3100_IMRA1 0x24
|
|
#define AB3100_IMRA2 0x25
|
|
#define AB3100_IMRA3 0x26
|
|
#define AB3100_IMRB1 0x2B
|
|
#define AB3100_IMRB2 0x2C
|
|
#define AB3100_IMRB3 0x2D
|
|
|
|
/* System Power Monitoring and control registers */
|
|
#define AB3100_MCA 0x2E
|
|
#define AB3100_MCB 0x2F
|
|
|
|
/* SIM power up */
|
|
#define AB3100_SUP 0x50
|
|
|
|
/*
|
|
* I2C communication
|
|
*
|
|
* The AB3100 is usually assigned address 0x48 (7-bit)
|
|
* The chip is defined in the platform i2c_board_data section.
|
|
*/
|
|
static int ab3100_get_chip_id(struct device *dev)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return (int)ab3100->chip_id;
|
|
}
|
|
|
|
static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 regval)
|
|
{
|
|
u8 regandval[2] = {reg, regval};
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* A two-byte write message with the first byte containing the register
|
|
* number and the second byte containing the value to be written
|
|
* effectively sets a register in the AB3100.
|
|
*/
|
|
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register): %d\n",
|
|
err);
|
|
} else if (err != 2) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register) "
|
|
"%d bytes transferred (expected 2)\n",
|
|
err);
|
|
err = -EIO;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int set_register_interruptible(struct device *dev,
|
|
u8 bank, u8 reg, u8 value)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_set_register_interruptible(ab3100, reg, value);
|
|
}
|
|
|
|
/*
|
|
* The test registers exist at an I2C bus address up one
|
|
* from the ordinary base. They are not supposed to be used
|
|
* in production code, but sometimes you have to do that
|
|
* anyway. It's currently only used from this file so declare
|
|
* it static and do not export.
|
|
*/
|
|
static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 regval)
|
|
{
|
|
u8 regandval[2] = {reg, regval};
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
err = i2c_master_send(ab3100->testreg_client, regandval, 2);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write test register): %d\n",
|
|
err);
|
|
} else if (err != 2) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write test register) "
|
|
"%d bytes transferred (expected 2)\n",
|
|
err);
|
|
err = -EIO;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 *regval)
|
|
{
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* AB3100 require an I2C "stop" command between each message, else
|
|
* it will not work. The only way of achieveing this with the
|
|
* message transport layer is to send the read and write messages
|
|
* separately.
|
|
*/
|
|
err = i2c_master_send(ab3100->i2c_client, ®, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send register address): %d\n",
|
|
err);
|
|
goto get_reg_out_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send register address) "
|
|
"%d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_reg_out_unlock;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
|
|
err = i2c_master_recv(ab3100->i2c_client, regval, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register): %d\n",
|
|
err);
|
|
goto get_reg_out_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register) "
|
|
"%d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_reg_out_unlock;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
|
|
get_reg_out_unlock:
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
|
|
u8 *value)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_get_register_interruptible(ab3100, reg, value);
|
|
}
|
|
|
|
static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
|
|
u8 first_reg, u8 *regvals, u8 numregs)
|
|
{
|
|
int err;
|
|
|
|
if (ab3100->chip_id == 0xa0 ||
|
|
ab3100->chip_id == 0xa1)
|
|
/* These don't support paged reads */
|
|
return -EIO;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Paged read also require an I2C "stop" command.
|
|
*/
|
|
err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send first register address): %d\n",
|
|
err);
|
|
goto get_reg_page_out_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send first register address) "
|
|
"%d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_reg_page_out_unlock;
|
|
}
|
|
|
|
err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register page): %d\n",
|
|
err);
|
|
goto get_reg_page_out_unlock;
|
|
} else if (err != numregs) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register page) "
|
|
"%d bytes transferred (expected %d)\n",
|
|
err, numregs);
|
|
err = -EIO;
|
|
goto get_reg_page_out_unlock;
|
|
}
|
|
|
|
/* All is well */
|
|
err = 0;
|
|
|
|
get_reg_page_out_unlock:
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int get_register_page_interruptible(struct device *dev, u8 bank,
|
|
u8 first_reg, u8 *regvals, u8 numregs)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_get_register_page_interruptible(ab3100,
|
|
first_reg, regvals, numregs);
|
|
}
|
|
|
|
static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 andmask, u8 ormask)
|
|
{
|
|
u8 regandval[2] = {reg, 0};
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/* First read out the target register */
|
|
err = i2c_master_send(ab3100->i2c_client, ®, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset send address): %d\n",
|
|
err);
|
|
goto get_maskset_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset send address) "
|
|
"%d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_maskset_unlock;
|
|
}
|
|
|
|
err = i2c_master_recv(ab3100->i2c_client, ®andval[1], 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset read register): %d\n",
|
|
err);
|
|
goto get_maskset_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset read register) "
|
|
"%d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_maskset_unlock;
|
|
}
|
|
|
|
/* Modify the register */
|
|
regandval[1] &= andmask;
|
|
regandval[1] |= ormask;
|
|
|
|
/* Write the register */
|
|
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register): %d\n",
|
|
err);
|
|
goto get_maskset_unlock;
|
|
} else if (err != 2) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register) "
|
|
"%d bytes transferred (expected 2)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_maskset_unlock;
|
|
}
|
|
|
|
/* All is well */
|
|
err = 0;
|
|
|
|
get_maskset_unlock:
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
|
|
u8 reg, u8 bitmask, u8 bitvalues)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_mask_and_set_register_interruptible(ab3100,
|
|
reg, bitmask, (bitmask & bitvalues));
|
|
}
|
|
|
|
/*
|
|
* Register a simple callback for handling any AB3100 events.
|
|
*/
|
|
int ab3100_event_register(struct ab3100 *ab3100,
|
|
struct notifier_block *nb)
|
|
{
|
|
return blocking_notifier_chain_register(&ab3100->event_subscribers,
|
|
nb);
|
|
}
|
|
EXPORT_SYMBOL(ab3100_event_register);
|
|
|
|
/*
|
|
* Remove a previously registered callback.
|
|
*/
|
|
int ab3100_event_unregister(struct ab3100 *ab3100,
|
|
struct notifier_block *nb)
|
|
{
|
|
return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
|
|
nb);
|
|
}
|
|
EXPORT_SYMBOL(ab3100_event_unregister);
|
|
|
|
|
|
static int ab3100_event_registers_startup_state_get(struct device *dev,
|
|
u8 *event)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
if (!ab3100->startup_events_read)
|
|
return -EAGAIN; /* Try again later */
|
|
memcpy(event, ab3100->startup_events, 3);
|
|
return 0;
|
|
}
|
|
|
|
static struct abx500_ops ab3100_ops = {
|
|
.get_chip_id = ab3100_get_chip_id,
|
|
.set_register = set_register_interruptible,
|
|
.get_register = get_register_interruptible,
|
|
.get_register_page = get_register_page_interruptible,
|
|
.set_register_page = NULL,
|
|
.mask_and_set_register = mask_and_set_register_interruptible,
|
|
.event_registers_startup_state_get =
|
|
ab3100_event_registers_startup_state_get,
|
|
.startup_irq_enabled = NULL,
|
|
};
|
|
|
|
/*
|
|
* This is a threaded interrupt handler so we can make some
|
|
* I2C calls etc.
|
|
*/
|
|
static irqreturn_t ab3100_irq_handler(int irq, void *data)
|
|
{
|
|
struct ab3100 *ab3100 = data;
|
|
u8 event_regs[3];
|
|
u32 fatevent;
|
|
int err;
|
|
|
|
err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
|
|
event_regs, 3);
|
|
if (err)
|
|
goto err_event;
|
|
|
|
fatevent = (event_regs[0] << 16) |
|
|
(event_regs[1] << 8) |
|
|
event_regs[2];
|
|
|
|
if (!ab3100->startup_events_read) {
|
|
ab3100->startup_events[0] = event_regs[0];
|
|
ab3100->startup_events[1] = event_regs[1];
|
|
ab3100->startup_events[2] = event_regs[2];
|
|
ab3100->startup_events_read = true;
|
|
}
|
|
/*
|
|
* The notified parties will have to mask out the events
|
|
* they're interested in and react to them. They will be
|
|
* notified on all events, then they use the fatevent value
|
|
* to determine if they're interested.
|
|
*/
|
|
blocking_notifier_call_chain(&ab3100->event_subscribers,
|
|
fatevent, NULL);
|
|
|
|
dev_dbg(ab3100->dev,
|
|
"IRQ Event: 0x%08x\n", fatevent);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
err_event:
|
|
dev_dbg(ab3100->dev,
|
|
"error reading event status\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
/*
|
|
* Some debugfs entries only exposed if we're using debug
|
|
*/
|
|
static int ab3100_registers_print(struct seq_file *s, void *p)
|
|
{
|
|
struct ab3100 *ab3100 = s->private;
|
|
u8 value;
|
|
u8 reg;
|
|
|
|
seq_printf(s, "AB3100 registers:\n");
|
|
|
|
for (reg = 0; reg < 0xff; reg++) {
|
|
ab3100_get_register_interruptible(ab3100, reg, &value);
|
|
seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ab3100_registers_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, ab3100_registers_print, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations ab3100_registers_fops = {
|
|
.open = ab3100_registers_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
struct ab3100_get_set_reg_priv {
|
|
struct ab3100 *ab3100;
|
|
bool mode;
|
|
};
|
|
|
|
static ssize_t ab3100_get_set_reg(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ab3100_get_set_reg_priv *priv = file->private_data;
|
|
struct ab3100 *ab3100 = priv->ab3100;
|
|
char buf[32];
|
|
ssize_t buf_size;
|
|
int regp;
|
|
unsigned long user_reg;
|
|
int err;
|
|
int i = 0;
|
|
|
|
/* Get userspace string and assure termination */
|
|
buf_size = min(count, (sizeof(buf)-1));
|
|
if (copy_from_user(buf, user_buf, buf_size))
|
|
return -EFAULT;
|
|
buf[buf_size] = 0;
|
|
|
|
/*
|
|
* The idea is here to parse a string which is either
|
|
* "0xnn" for reading a register, or "0xaa 0xbb" for
|
|
* writing 0xbb to the register 0xaa. First move past
|
|
* whitespace and then begin to parse the register.
|
|
*/
|
|
while ((i < buf_size) && (buf[i] == ' '))
|
|
i++;
|
|
regp = i;
|
|
|
|
/*
|
|
* Advance pointer to end of string then terminate
|
|
* the register string. This is needed to satisfy
|
|
* the strict_strtoul() function.
|
|
*/
|
|
while ((i < buf_size) && (buf[i] != ' '))
|
|
i++;
|
|
buf[i] = '\0';
|
|
|
|
err = strict_strtoul(&buf[regp], 16, &user_reg);
|
|
if (err)
|
|
return err;
|
|
if (user_reg > 0xff)
|
|
return -EINVAL;
|
|
|
|
/* Either we read or we write a register here */
|
|
if (!priv->mode) {
|
|
/* Reading */
|
|
u8 reg = (u8) user_reg;
|
|
u8 regvalue;
|
|
|
|
ab3100_get_register_interruptible(ab3100, reg, ®value);
|
|
|
|
dev_info(ab3100->dev,
|
|
"debug read AB3100 reg[0x%02x]: 0x%02x\n",
|
|
reg, regvalue);
|
|
} else {
|
|
int valp;
|
|
unsigned long user_value;
|
|
u8 reg = (u8) user_reg;
|
|
u8 value;
|
|
u8 regvalue;
|
|
|
|
/*
|
|
* Writing, we need some value to write to
|
|
* the register so keep parsing the string
|
|
* from userspace.
|
|
*/
|
|
i++;
|
|
while ((i < buf_size) && (buf[i] == ' '))
|
|
i++;
|
|
valp = i;
|
|
while ((i < buf_size) && (buf[i] != ' '))
|
|
i++;
|
|
buf[i] = '\0';
|
|
|
|
err = strict_strtoul(&buf[valp], 16, &user_value);
|
|
if (err)
|
|
return err;
|
|
if (user_reg > 0xff)
|
|
return -EINVAL;
|
|
|
|
value = (u8) user_value;
|
|
ab3100_set_register_interruptible(ab3100, reg, value);
|
|
ab3100_get_register_interruptible(ab3100, reg, ®value);
|
|
|
|
dev_info(ab3100->dev,
|
|
"debug write reg[0x%02x] with 0x%02x, "
|
|
"after readback: 0x%02x\n",
|
|
reg, value, regvalue);
|
|
}
|
|
return buf_size;
|
|
}
|
|
|
|
static const struct file_operations ab3100_get_set_reg_fops = {
|
|
.open = simple_open,
|
|
.write = ab3100_get_set_reg,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
static struct dentry *ab3100_dir;
|
|
static struct dentry *ab3100_reg_file;
|
|
static struct ab3100_get_set_reg_priv ab3100_get_priv;
|
|
static struct dentry *ab3100_get_reg_file;
|
|
static struct ab3100_get_set_reg_priv ab3100_set_priv;
|
|
static struct dentry *ab3100_set_reg_file;
|
|
|
|
static void ab3100_setup_debugfs(struct ab3100 *ab3100)
|
|
{
|
|
int err;
|
|
|
|
ab3100_dir = debugfs_create_dir("ab3100", NULL);
|
|
if (!ab3100_dir)
|
|
goto exit_no_debugfs;
|
|
|
|
ab3100_reg_file = debugfs_create_file("registers",
|
|
S_IRUGO, ab3100_dir, ab3100,
|
|
&ab3100_registers_fops);
|
|
if (!ab3100_reg_file) {
|
|
err = -ENOMEM;
|
|
goto exit_destroy_dir;
|
|
}
|
|
|
|
ab3100_get_priv.ab3100 = ab3100;
|
|
ab3100_get_priv.mode = false;
|
|
ab3100_get_reg_file = debugfs_create_file("get_reg",
|
|
S_IWUSR, ab3100_dir, &ab3100_get_priv,
|
|
&ab3100_get_set_reg_fops);
|
|
if (!ab3100_get_reg_file) {
|
|
err = -ENOMEM;
|
|
goto exit_destroy_reg;
|
|
}
|
|
|
|
ab3100_set_priv.ab3100 = ab3100;
|
|
ab3100_set_priv.mode = true;
|
|
ab3100_set_reg_file = debugfs_create_file("set_reg",
|
|
S_IWUSR, ab3100_dir, &ab3100_set_priv,
|
|
&ab3100_get_set_reg_fops);
|
|
if (!ab3100_set_reg_file) {
|
|
err = -ENOMEM;
|
|
goto exit_destroy_get_reg;
|
|
}
|
|
return;
|
|
|
|
exit_destroy_get_reg:
|
|
debugfs_remove(ab3100_get_reg_file);
|
|
exit_destroy_reg:
|
|
debugfs_remove(ab3100_reg_file);
|
|
exit_destroy_dir:
|
|
debugfs_remove(ab3100_dir);
|
|
exit_no_debugfs:
|
|
return;
|
|
}
|
|
static inline void ab3100_remove_debugfs(void)
|
|
{
|
|
debugfs_remove(ab3100_set_reg_file);
|
|
debugfs_remove(ab3100_get_reg_file);
|
|
debugfs_remove(ab3100_reg_file);
|
|
debugfs_remove(ab3100_dir);
|
|
}
|
|
#else
|
|
static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
|
|
{
|
|
}
|
|
static inline void ab3100_remove_debugfs(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Basic set-up, datastructure creation/destruction and I2C interface.
|
|
* This sets up a default config in the AB3100 chip so that it
|
|
* will work as expected.
|
|
*/
|
|
|
|
struct ab3100_init_setting {
|
|
u8 abreg;
|
|
u8 setting;
|
|
};
|
|
|
|
static const struct ab3100_init_setting ab3100_init_settings[] = {
|
|
{
|
|
.abreg = AB3100_MCA,
|
|
.setting = 0x01
|
|
}, {
|
|
.abreg = AB3100_MCB,
|
|
.setting = 0x30
|
|
}, {
|
|
.abreg = AB3100_IMRA1,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_IMRA2,
|
|
.setting = 0xFF
|
|
}, {
|
|
.abreg = AB3100_IMRA3,
|
|
.setting = 0x01
|
|
}, {
|
|
.abreg = AB3100_IMRB1,
|
|
.setting = 0xBF
|
|
}, {
|
|
.abreg = AB3100_IMRB2,
|
|
.setting = 0xFF
|
|
}, {
|
|
.abreg = AB3100_IMRB3,
|
|
.setting = 0xFF
|
|
}, {
|
|
.abreg = AB3100_SUP,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_DIS,
|
|
.setting = 0xF0
|
|
}, {
|
|
.abreg = AB3100_D0C,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_D1C,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_D2C,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_D3C,
|
|
.setting = 0x00
|
|
},
|
|
};
|
|
|
|
static int ab3100_setup(struct ab3100 *ab3100)
|
|
{
|
|
int err = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
|
|
err = ab3100_set_register_interruptible(ab3100,
|
|
ab3100_init_settings[i].abreg,
|
|
ab3100_init_settings[i].setting);
|
|
if (err)
|
|
goto exit_no_setup;
|
|
}
|
|
|
|
/*
|
|
* Special trick to make the AB3100 use the 32kHz clock (RTC)
|
|
* bit 3 in test register 0x02 is a special, undocumented test
|
|
* register bit that only exist in AB3100 P1E
|
|
*/
|
|
if (ab3100->chip_id == 0xc4) {
|
|
dev_warn(ab3100->dev,
|
|
"AB3100 P1E variant detected, "
|
|
"forcing chip to 32KHz\n");
|
|
err = ab3100_set_test_register_interruptible(ab3100,
|
|
0x02, 0x08);
|
|
}
|
|
|
|
exit_no_setup:
|
|
return err;
|
|
}
|
|
|
|
/* The subdevices of the AB3100 */
|
|
static struct mfd_cell ab3100_devs[] = {
|
|
{
|
|
.name = "ab3100-dac",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-leds",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-power",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-regulators",
|
|
.of_compatible = "stericsson,ab3100-regulators",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-sim",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-uart",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-rtc",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-charger",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-boost",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-adc",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-fuelgauge",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-vibrator",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-otp",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-codec",
|
|
.id = -1,
|
|
},
|
|
};
|
|
|
|
struct ab_family_id {
|
|
u8 id;
|
|
char *name;
|
|
};
|
|
|
|
static const struct ab_family_id ids[] = {
|
|
/* AB3100 */
|
|
{
|
|
.id = 0xc0,
|
|
.name = "P1A"
|
|
}, {
|
|
.id = 0xc1,
|
|
.name = "P1B"
|
|
}, {
|
|
.id = 0xc2,
|
|
.name = "P1C"
|
|
}, {
|
|
.id = 0xc3,
|
|
.name = "P1D"
|
|
}, {
|
|
.id = 0xc4,
|
|
.name = "P1E"
|
|
}, {
|
|
.id = 0xc5,
|
|
.name = "P1F/R1A"
|
|
}, {
|
|
.id = 0xc6,
|
|
.name = "P1G/R1A"
|
|
}, {
|
|
.id = 0xc7,
|
|
.name = "P2A/R2A"
|
|
}, {
|
|
.id = 0xc8,
|
|
.name = "P2B/R2B"
|
|
},
|
|
/* AB3000 variants, not supported */
|
|
{
|
|
.id = 0xa0
|
|
}, {
|
|
.id = 0xa1
|
|
}, {
|
|
.id = 0xa2
|
|
}, {
|
|
.id = 0xa3
|
|
}, {
|
|
.id = 0xa4
|
|
}, {
|
|
.id = 0xa5
|
|
}, {
|
|
.id = 0xa6
|
|
}, {
|
|
.id = 0xa7
|
|
},
|
|
/* Terminator */
|
|
{
|
|
.id = 0x00,
|
|
},
|
|
};
|
|
|
|
static int ab3100_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ab3100 *ab3100;
|
|
struct ab3100_platform_data *ab3100_plf_data =
|
|
client->dev.platform_data;
|
|
int err;
|
|
int i;
|
|
|
|
ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
|
|
if (!ab3100) {
|
|
dev_err(&client->dev, "could not allocate AB3100 device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Initialize data structure */
|
|
mutex_init(&ab3100->access_mutex);
|
|
BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
|
|
|
|
ab3100->i2c_client = client;
|
|
ab3100->dev = &ab3100->i2c_client->dev;
|
|
|
|
i2c_set_clientdata(client, ab3100);
|
|
|
|
/* Read chip ID register */
|
|
err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
|
|
&ab3100->chip_id);
|
|
if (err) {
|
|
dev_err(&client->dev,
|
|
"could not communicate with the AB3100 analog "
|
|
"baseband chip\n");
|
|
goto exit_no_detect;
|
|
}
|
|
|
|
for (i = 0; ids[i].id != 0x0; i++) {
|
|
if (ids[i].id == ab3100->chip_id) {
|
|
if (ids[i].name != NULL) {
|
|
snprintf(&ab3100->chip_name[0],
|
|
sizeof(ab3100->chip_name) - 1,
|
|
"AB3100 %s",
|
|
ids[i].name);
|
|
break;
|
|
} else {
|
|
dev_err(&client->dev,
|
|
"AB3000 is not supported\n");
|
|
goto exit_no_detect;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ids[i].id == 0x0) {
|
|
dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
|
|
ab3100->chip_id);
|
|
dev_err(&client->dev, "accepting it anyway. Please update "
|
|
"the driver.\n");
|
|
goto exit_no_detect;
|
|
}
|
|
|
|
dev_info(&client->dev, "Detected chip: %s\n",
|
|
&ab3100->chip_name[0]);
|
|
|
|
/* Attach a second dummy i2c_client to the test register address */
|
|
ab3100->testreg_client = i2c_new_dummy(client->adapter,
|
|
client->addr + 1);
|
|
if (!ab3100->testreg_client) {
|
|
err = -ENOMEM;
|
|
goto exit_no_testreg_client;
|
|
}
|
|
|
|
err = ab3100_setup(ab3100);
|
|
if (err)
|
|
goto exit_no_setup;
|
|
|
|
err = devm_request_threaded_irq(&client->dev,
|
|
client->irq, NULL, ab3100_irq_handler,
|
|
IRQF_ONESHOT, "ab3100-core", ab3100);
|
|
if (err)
|
|
goto exit_no_irq;
|
|
|
|
err = abx500_register_ops(&client->dev, &ab3100_ops);
|
|
if (err)
|
|
goto exit_no_ops;
|
|
|
|
/* Set up and register the platform devices. */
|
|
for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) {
|
|
ab3100_devs[i].platform_data = ab3100_plf_data;
|
|
ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data);
|
|
}
|
|
|
|
err = mfd_add_devices(&client->dev, 0, ab3100_devs,
|
|
ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
|
|
|
|
ab3100_setup_debugfs(ab3100);
|
|
|
|
return 0;
|
|
|
|
exit_no_ops:
|
|
exit_no_irq:
|
|
exit_no_setup:
|
|
i2c_unregister_device(ab3100->testreg_client);
|
|
exit_no_testreg_client:
|
|
exit_no_detect:
|
|
return err;
|
|
}
|
|
|
|
static int ab3100_remove(struct i2c_client *client)
|
|
{
|
|
struct ab3100 *ab3100 = i2c_get_clientdata(client);
|
|
|
|
/* Unregister subdevices */
|
|
mfd_remove_devices(&client->dev);
|
|
ab3100_remove_debugfs();
|
|
i2c_unregister_device(ab3100->testreg_client);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ab3100_id[] = {
|
|
{ "ab3100", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ab3100_id);
|
|
|
|
static struct i2c_driver ab3100_driver = {
|
|
.driver = {
|
|
.name = "ab3100",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.id_table = ab3100_id,
|
|
.probe = ab3100_probe,
|
|
.remove = ab3100_remove,
|
|
};
|
|
|
|
static int __init ab3100_i2c_init(void)
|
|
{
|
|
return i2c_add_driver(&ab3100_driver);
|
|
}
|
|
|
|
static void __exit ab3100_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&ab3100_driver);
|
|
}
|
|
|
|
subsys_initcall(ab3100_i2c_init);
|
|
module_exit(ab3100_i2c_exit);
|
|
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
|
|
MODULE_DESCRIPTION("AB3100 core driver");
|
|
MODULE_LICENSE("GPL");
|