alistair23-linux/arch/mips/include/asm/pci.h
Ralf Baechle 98873f53be MIPS: Better than nothing implementation of PCI mmap to fix X.
Certain X11 servers such as the SIS server will only work if PCI mmap is
implemented.  This patch implements PCI mmap but to be on the same side
so close to a release it only supports uncached mappings so performance
will not be optimal for some uses such as framebuffers.

Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and
testing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-09 21:55:43 +00:00

185 lines
5.1 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_PCI_H
#define _ASM_PCI_H
#include <linux/mm.h>
#ifdef __KERNEL__
/*
* This file essentially defines the interface between board
* specific PCI code and MIPS common PCI code. Should potentially put
* into include/asm/pci.h file.
*/
#include <linux/ioport.h>
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
* multiple PCI channels may have multiple PCI host controllers or a
* single controller supporting multiple channels.
*/
struct pci_controller {
struct pci_controller *next;
struct pci_bus *bus;
struct pci_ops *pci_ops;
struct resource *mem_resource;
unsigned long mem_offset;
struct resource *io_resource;
unsigned long io_offset;
unsigned long io_map_base;
unsigned int index;
/* For compatibility with current (as of July 2003) pciutils
and XFree86. Eventually will be removed. */
unsigned int need_domain_info;
int iommu;
/* Optional access methods for reading/writing the bus number
of the PCI controller */
int (*get_busno)(void);
void (*set_busno)(int busno);
};
/*
* Used by boards to register their PCI busses before the actual scanning.
*/
extern struct pci_controller * alloc_pci_controller(void);
extern void register_pci_controller(struct pci_controller *hose);
/*
* board supplied pci irq fixup routine
*/
extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
extern unsigned int pcibios_assign_all_busses(void);
#define pcibios_scan_all_fns(a, b) 0
extern unsigned long PCIBIOS_MIN_IO;
extern unsigned long PCIBIOS_MIN_MEM;
#define PCIBIOS_MIN_CARDBUS_IO 0x4000
extern void pcibios_set_master(struct pci_dev *dev);
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
#include <asm/io.h>
struct pci_dev;
/*
* The PCI address space does equal the physical memory address space. The
* networking and block device layers use this boolean for bounce buffer
* decisions. This is set if any hose does not have an IOMMU.
*/
extern unsigned int PCI_DMA_BUS_IS_PHYS;
#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
#else /* CONFIG_DMA_NEED_PCI_MAP_STATE */
/* pci_unmap_{page,single} is a nop so... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
*strat = PCI_DMA_BURST_INFINITY;
*strategy_parameter = ~0UL;
}
#endif
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region);
static inline struct resource *
pcibios_select_root(struct pci_dev *pdev, struct resource *res)
{
struct resource *root = NULL;
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
return root;
}
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
static inline int pci_proc_domain(struct pci_bus *bus)
{
struct pci_controller *hose = bus->sysdata;
return hose->need_domain_info;
}
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
/* Chances are this interrupt is wired PC-style ... */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return channel ? 15 : 14;
}
extern int pci_probe_only;
extern char * (*pcibios_plat_setup)(char *str);
#endif /* _ASM_PCI_H */