4aa0f4d726
Interrupt Group 4 mapps the GPIO pins enabled as interrupt sources; add defines to make this clear when addressing them later in code. The mapped GPIOs support triggering on either level high or low. To achieve this, the set_type() function calls rb532_gpio_set_ilevel() for interrupts of the above mentioned group. As there is no way to alter the triggering characteristics of the other interrupts, accept level triggering on status high only. (This is just a guess; but as the system boots fine and interrupt-driven devices (e.g. serial console) work with no implications, it seems to be right.) To clear a GPIO mapped IRQ, the source has to be cleared (i.e., the interrupt status bit of the corresponding GPIO pin). This is done inside rb532_disable_irq(). After applying these changes I could undo most of my former "fixes" to pata-rb532-cf. Particularly all interrupt handling can be done generically via set_irq_type() as it was before. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
237 lines
5.9 KiB
C
237 lines
5.9 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Copyright 2002 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc.
|
|
* stevel@mvista.com or source@mvista.com
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/random.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/mach-rc32434/irq.h>
|
|
#include <asm/mach-rc32434/gpio.h>
|
|
|
|
struct intr_group {
|
|
u32 mask; /* mask of valid bits in pending/mask registers */
|
|
volatile u32 *base_addr;
|
|
};
|
|
|
|
#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32)
|
|
|
|
#if (NR_IRQS < RC32434_NR_IRQS)
|
|
#error Too little irqs defined. Did you override <asm/irq.h> ?
|
|
#endif
|
|
|
|
static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
|
|
{
|
|
.mask = 0x0000efff,
|
|
.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
|
|
{
|
|
.mask = 0x00001fff,
|
|
.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
|
|
{
|
|
.mask = 0x00000007,
|
|
.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
|
|
{
|
|
.mask = 0x0003ffff,
|
|
.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
|
|
{
|
|
.mask = 0xffffffff,
|
|
.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
|
|
};
|
|
|
|
#define READ_PEND(base) (*(base))
|
|
#define READ_MASK(base) (*(base + 2))
|
|
#define WRITE_MASK(base, val) (*(base + 2) = (val))
|
|
|
|
static inline int irq_to_group(unsigned int irq_nr)
|
|
{
|
|
return (irq_nr - GROUP0_IRQ_BASE) >> 5;
|
|
}
|
|
|
|
static inline int group_to_ip(unsigned int group)
|
|
{
|
|
return group + 2;
|
|
}
|
|
|
|
static inline void enable_local_irq(unsigned int ip)
|
|
{
|
|
int ipnum = 0x100 << ip;
|
|
|
|
set_c0_status(ipnum);
|
|
}
|
|
|
|
static inline void disable_local_irq(unsigned int ip)
|
|
{
|
|
int ipnum = 0x100 << ip;
|
|
|
|
clear_c0_status(ipnum);
|
|
}
|
|
|
|
static inline void ack_local_irq(unsigned int ip)
|
|
{
|
|
int ipnum = 0x100 << ip;
|
|
|
|
clear_c0_cause(ipnum);
|
|
}
|
|
|
|
static void rb532_enable_irq(unsigned int irq_nr)
|
|
{
|
|
int ip = irq_nr - GROUP0_IRQ_BASE;
|
|
unsigned int group, intr_bit;
|
|
volatile unsigned int *addr;
|
|
|
|
if (ip < 0)
|
|
enable_local_irq(irq_nr);
|
|
else {
|
|
group = ip >> 5;
|
|
|
|
ip &= (1 << 5) - 1;
|
|
intr_bit = 1 << ip;
|
|
|
|
enable_local_irq(group_to_ip(group));
|
|
|
|
addr = intr_group[group].base_addr;
|
|
WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
|
|
}
|
|
}
|
|
|
|
static void rb532_disable_irq(unsigned int irq_nr)
|
|
{
|
|
int ip = irq_nr - GROUP0_IRQ_BASE;
|
|
unsigned int group, intr_bit, mask;
|
|
volatile unsigned int *addr;
|
|
|
|
if (ip < 0) {
|
|
disable_local_irq(irq_nr);
|
|
} else {
|
|
group = ip >> 5;
|
|
|
|
ip &= (1 << 5) - 1;
|
|
intr_bit = 1 << ip;
|
|
addr = intr_group[group].base_addr;
|
|
mask = READ_MASK(addr);
|
|
mask |= intr_bit;
|
|
WRITE_MASK(addr, mask);
|
|
|
|
if (group == GPIO_MAPPED_IRQ_GROUP)
|
|
rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE);
|
|
|
|
/*
|
|
* if there are no more interrupts enabled in this
|
|
* group, disable corresponding IP
|
|
*/
|
|
if (mask == intr_group[group].mask)
|
|
disable_local_irq(group_to_ip(group));
|
|
}
|
|
}
|
|
|
|
static void rb532_mask_and_ack_irq(unsigned int irq_nr)
|
|
{
|
|
rb532_disable_irq(irq_nr);
|
|
ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
|
|
}
|
|
|
|
static int rb532_set_type(unsigned int irq_nr, unsigned type)
|
|
{
|
|
int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE;
|
|
int group = irq_to_group(irq_nr);
|
|
|
|
if (group != GPIO_MAPPED_IRQ_GROUP)
|
|
return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
rb532_gpio_set_ilevel(1, gpio);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
rb532_gpio_set_ilevel(0, gpio);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip rc32434_irq_type = {
|
|
.name = "RB532",
|
|
.ack = rb532_disable_irq,
|
|
.mask = rb532_disable_irq,
|
|
.mask_ack = rb532_mask_and_ack_irq,
|
|
.unmask = rb532_enable_irq,
|
|
.set_type = rb532_set_type,
|
|
};
|
|
|
|
void __init arch_init_irq(void)
|
|
{
|
|
int i;
|
|
|
|
pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
|
|
|
|
for (i = 0; i < RC32434_NR_IRQS; i++)
|
|
set_irq_chip_and_handler(i, &rc32434_irq_type,
|
|
handle_level_irq);
|
|
}
|
|
|
|
/* Main Interrupt dispatcher */
|
|
asmlinkage void plat_irq_dispatch(void)
|
|
{
|
|
unsigned int ip, pend, group;
|
|
volatile unsigned int *addr;
|
|
unsigned int cp0_cause = read_c0_cause() & read_c0_status();
|
|
|
|
if (cp0_cause & CAUSEF_IP7) {
|
|
do_IRQ(7);
|
|
} else {
|
|
ip = (cp0_cause & 0x7c00);
|
|
if (ip) {
|
|
group = 21 + (fls(ip) - 32);
|
|
|
|
addr = intr_group[group].base_addr;
|
|
|
|
pend = READ_PEND(addr);
|
|
pend &= ~READ_MASK(addr); /* only unmasked interrupts */
|
|
pend = 39 + (fls(pend) - 32);
|
|
do_IRQ((group << 5) + pend);
|
|
}
|
|
}
|
|
}
|