alistair23-linux/arch/arm/mach-highbank/highbank.c
Mark Rutland be120397e7 ARM: migrate to common PSCI client code
Now that the common PSCI client code has been factored out to
drivers/firmware, and made safe for 32-bit use, move the 32-bit ARM code
over to it. This results in a moderate reduction of duplicated lines,
and will prevent further duplication as the PSCI client code is updated
for PSCI 1.0 and beyond.

The two legacy platform users of the PSCI invocation code are updated to
account for interface changes. In both cases the power state parameter
(which is constant) is now generated using macros, so that the
pack/unpack logic can be killed in preparation for PSCI 1.0 power state
changes.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-08-03 15:38:39 +01:00

190 lines
4.5 KiB
C

/*
* Copyright 2010-2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/pl320-ipc.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/psci.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "core.h"
#include "sysregs.h"
void __iomem *sregs_base;
void __iomem *scu_base_addr;
static void __init highbank_scu_map_io(void)
{
unsigned long base;
/* Get SCU base */
asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
scu_base_addr = ioremap(base, SZ_4K);
}
static void highbank_l2c310_write_sec(unsigned long val, unsigned reg)
{
if (reg == L2X0_CTRL)
highbank_smc1(0x102, val);
else
WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n",
reg);
}
static void __init highbank_init_irq(void)
{
irqchip_init();
if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
highbank_scu_map_io();
}
static void highbank_power_off(void)
{
highbank_set_pwr_shutdown();
while (1)
cpu_do_idle();
}
static int highbank_platform_notifier(struct notifier_block *nb,
unsigned long event, void *__dev)
{
struct resource *res;
int reg = -1;
u32 val;
struct device *dev = __dev;
if (event != BUS_NOTIFY_ADD_DEVICE)
return NOTIFY_DONE;
if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci"))
reg = 0xc;
else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci"))
reg = 0x18;
else if (of_device_is_compatible(dev->of_node, "arm,pl330"))
reg = 0x20;
else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) {
res = platform_get_resource(to_platform_device(dev),
IORESOURCE_MEM, 0);
if (res) {
if (res->start == 0xfff50000)
reg = 0;
else if (res->start == 0xfff51000)
reg = 4;
}
}
if (reg < 0)
return NOTIFY_DONE;
if (of_property_read_bool(dev->of_node, "dma-coherent")) {
val = readl(sregs_base + reg);
writel(val | 0xff01, sregs_base + reg);
set_dma_ops(dev, &arm_coherent_dma_ops);
}
return NOTIFY_OK;
}
static struct notifier_block highbank_amba_nb = {
.notifier_call = highbank_platform_notifier,
};
static struct notifier_block highbank_platform_nb = {
.notifier_call = highbank_platform_notifier,
};
static struct platform_device highbank_cpuidle_device = {
.name = "cpuidle-calxeda",
};
static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
{
u32 key = *(u32 *)data;
if (event != 0x1000)
return 0;
if (key == KEY_POWER)
orderly_poweroff(false);
else if (key == 0xffff)
ctrl_alt_del();
return 0;
}
static struct notifier_block hb_keys_nb = {
.notifier_call = hb_keys_notifier,
};
static void __init highbank_init(void)
{
struct device_node *np;
/* Map system registers */
np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);
pm_power_off = highbank_power_off;
highbank_pm_init();
bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
pl320_ipc_register_notifier(&hb_keys_nb);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (psci_ops.cpu_suspend)
platform_device_register(&highbank_cpuidle_device);
}
static const char *const highbank_match[] __initconst = {
"calxeda,highbank",
"calxeda,ecx-2000",
NULL,
};
DT_MACHINE_START(HIGHBANK, "Highbank")
#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
.dma_zone_size = (4ULL * SZ_1G),
#endif
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.l2c_write_sec = highbank_l2c310_write_sec,
.init_irq = highbank_init_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,
.restart = highbank_restart,
MACHINE_END