![Tejun Heo](/assets/img/avatar_default.png)
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
444 lines
10 KiB
C
444 lines
10 KiB
C
/*
|
|
* Driver for Maxim MAX2165 silicon tuner
|
|
*
|
|
* Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
*
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dvb/frontend.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
|
|
#include "max2165.h"
|
|
#include "max2165_priv.h"
|
|
#include "tuner-i2c.h"
|
|
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) \
|
|
printk(KERN_DEBUG "max2165: " args); \
|
|
} while (0)
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
|
|
|
|
static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
|
|
{
|
|
int ret;
|
|
u8 buf[] = { reg, data };
|
|
struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
|
|
|
|
msg.addr = priv->config->i2c_address;
|
|
|
|
if (debug >= 2)
|
|
printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
|
|
__func__, reg, data);
|
|
|
|
ret = i2c_transfer(priv->i2c, &msg, 1);
|
|
|
|
if (ret != 1)
|
|
dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
|
|
__func__, reg, data, ret);
|
|
|
|
return (ret != 1) ? -EIO : 0;
|
|
}
|
|
|
|
static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
|
|
{
|
|
int ret;
|
|
u8 dev_addr = priv->config->i2c_address;
|
|
|
|
u8 b0[] = { reg };
|
|
u8 b1[] = { 0 };
|
|
struct i2c_msg msg[] = {
|
|
{ .addr = dev_addr, .flags = 0, .buf = b0, .len = 1 },
|
|
{ .addr = dev_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 },
|
|
};
|
|
|
|
ret = i2c_transfer(priv->i2c, msg, 2);
|
|
if (ret != 2) {
|
|
dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
|
|
__func__, reg, ret);
|
|
return -EIO;
|
|
}
|
|
|
|
*p_data = b1[0];
|
|
if (debug >= 2)
|
|
printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
|
|
__func__, reg, b1[0]);
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_mask_write_reg(struct max2165_priv *priv, u8 reg,
|
|
u8 mask, u8 data)
|
|
{
|
|
int ret;
|
|
u8 v;
|
|
|
|
data &= mask;
|
|
ret = max2165_read_reg(priv, reg, &v);
|
|
if (ret != 0)
|
|
return ret;
|
|
v &= ~mask;
|
|
v |= data;
|
|
ret = max2165_write_reg(priv, reg, v);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max2165_read_rom_table(struct max2165_priv *priv)
|
|
{
|
|
u8 dat[3];
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
max2165_write_reg(priv, REG_ROM_TABLE_ADDR, i + 1);
|
|
max2165_read_reg(priv, REG_ROM_TABLE_DATA, &dat[i]);
|
|
}
|
|
|
|
priv->tf_ntch_low_cfg = dat[0] >> 4;
|
|
priv->tf_ntch_hi_cfg = dat[0] & 0x0F;
|
|
priv->tf_balun_low_ref = dat[1] & 0x0F;
|
|
priv->tf_balun_hi_ref = dat[1] >> 4;
|
|
priv->bb_filter_7mhz_cfg = dat[2] & 0x0F;
|
|
priv->bb_filter_8mhz_cfg = dat[2] >> 4;
|
|
|
|
dprintk("tf_ntch_low_cfg = 0x%X\n", priv->tf_ntch_low_cfg);
|
|
dprintk("tf_ntch_hi_cfg = 0x%X\n", priv->tf_ntch_hi_cfg);
|
|
dprintk("tf_balun_low_ref = 0x%X\n", priv->tf_balun_low_ref);
|
|
dprintk("tf_balun_hi_ref = 0x%X\n", priv->tf_balun_hi_ref);
|
|
dprintk("bb_filter_7mhz_cfg = 0x%X\n", priv->bb_filter_7mhz_cfg);
|
|
dprintk("bb_filter_8mhz_cfg = 0x%X\n", priv->bb_filter_8mhz_cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_set_osc(struct max2165_priv *priv, u8 osc /*MHz*/)
|
|
{
|
|
u8 v;
|
|
|
|
v = (osc / 2);
|
|
if (v == 2)
|
|
v = 0x7;
|
|
else
|
|
v -= 8;
|
|
|
|
max2165_mask_write_reg(priv, REG_PLL_CFG, 0x07, v);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_set_bandwidth(struct max2165_priv *priv, u32 bw)
|
|
{
|
|
u8 val;
|
|
|
|
if (bw == BANDWIDTH_8_MHZ)
|
|
val = priv->bb_filter_8mhz_cfg;
|
|
else
|
|
val = priv->bb_filter_7mhz_cfg;
|
|
|
|
max2165_mask_write_reg(priv, REG_BASEBAND_CTRL, 0xF0, val << 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fixpt_div32(u32 dividend, u32 divisor, u32 *quotient, u32 *fraction)
|
|
{
|
|
u32 remainder;
|
|
u32 q, f = 0;
|
|
int i;
|
|
|
|
if (0 == divisor)
|
|
return -1;
|
|
|
|
q = dividend / divisor;
|
|
remainder = dividend - q * divisor;
|
|
|
|
for (i = 0; i < 31; i++) {
|
|
remainder <<= 1;
|
|
if (remainder >= divisor) {
|
|
f += 1;
|
|
remainder -= divisor;
|
|
}
|
|
f <<= 1;
|
|
}
|
|
|
|
*quotient = q;
|
|
*fraction = f;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_set_rf(struct max2165_priv *priv, u32 freq)
|
|
{
|
|
u8 tf;
|
|
u8 tf_ntch;
|
|
u32 t;
|
|
u32 quotient, fraction;
|
|
|
|
/* Set PLL divider according to RF frequency */
|
|
fixpt_div32(freq / 1000, priv->config->osc_clk * 1000,
|
|
"ient, &fraction);
|
|
|
|
/* 20-bit fraction */
|
|
fraction >>= 12;
|
|
|
|
max2165_write_reg(priv, REG_NDIV_INT, quotient);
|
|
max2165_mask_write_reg(priv, REG_NDIV_FRAC2, 0x0F, fraction >> 16);
|
|
max2165_write_reg(priv, REG_NDIV_FRAC1, fraction >> 8);
|
|
max2165_write_reg(priv, REG_NDIV_FRAC0, fraction);
|
|
|
|
/* Norch Filter */
|
|
tf_ntch = (freq < 725000000) ?
|
|
priv->tf_ntch_low_cfg : priv->tf_ntch_hi_cfg;
|
|
|
|
/* Tracking filter balun */
|
|
t = priv->tf_balun_low_ref;
|
|
t += (priv->tf_balun_hi_ref - priv->tf_balun_low_ref)
|
|
* (freq / 1000 - 470000) / (780000 - 470000);
|
|
|
|
tf = t;
|
|
dprintk("tf = %X\n", tf);
|
|
tf |= tf_ntch << 4;
|
|
|
|
max2165_write_reg(priv, REG_TRACK_FILTER, tf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max2165_debug_status(struct max2165_priv *priv)
|
|
{
|
|
u8 status, autotune;
|
|
u8 auto_vco_success, auto_vco_active;
|
|
u8 pll_locked;
|
|
u8 dc_offset_low, dc_offset_hi;
|
|
u8 signal_lv_over_threshold;
|
|
u8 vco, vco_sub_band, adc;
|
|
|
|
max2165_read_reg(priv, REG_STATUS, &status);
|
|
max2165_read_reg(priv, REG_AUTOTUNE, &autotune);
|
|
|
|
auto_vco_success = (status >> 6) & 0x01;
|
|
auto_vco_active = (status >> 5) & 0x01;
|
|
pll_locked = (status >> 4) & 0x01;
|
|
dc_offset_low = (status >> 3) & 0x01;
|
|
dc_offset_hi = (status >> 2) & 0x01;
|
|
signal_lv_over_threshold = status & 0x01;
|
|
|
|
vco = autotune >> 6;
|
|
vco_sub_band = (autotune >> 3) & 0x7;
|
|
adc = autotune & 0x7;
|
|
|
|
dprintk("auto VCO active: %d, auto VCO success: %d\n",
|
|
auto_vco_active, auto_vco_success);
|
|
dprintk("PLL locked: %d\n", pll_locked);
|
|
dprintk("DC offset low: %d, DC offset high: %d\n",
|
|
dc_offset_low, dc_offset_hi);
|
|
dprintk("Signal lvl over threshold: %d\n", signal_lv_over_threshold);
|
|
dprintk("VCO: %d, VCO Sub-band: %d, ADC: %d\n", vco, vco_sub_band, adc);
|
|
}
|
|
|
|
static int max2165_set_params(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *params)
|
|
{
|
|
struct max2165_priv *priv = fe->tuner_priv;
|
|
int ret;
|
|
|
|
dprintk("%s() frequency=%d (Hz)\n", __func__, params->frequency);
|
|
if (fe->ops.info.type == FE_ATSC) {
|
|
return -EINVAL;
|
|
} else if (fe->ops.info.type == FE_OFDM) {
|
|
dprintk("%s() OFDM\n", __func__);
|
|
switch (params->u.ofdm.bandwidth) {
|
|
case BANDWIDTH_6_MHZ:
|
|
return -EINVAL;
|
|
case BANDWIDTH_7_MHZ:
|
|
case BANDWIDTH_8_MHZ:
|
|
priv->frequency = params->frequency;
|
|
priv->bandwidth = params->u.ofdm.bandwidth;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "MAX2165 bandwidth not set!\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "MAX2165 modulation type not supported!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dprintk("%s() frequency=%d\n", __func__, priv->frequency);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
max2165_set_bandwidth(priv, priv->bandwidth);
|
|
ret = max2165_set_rf(priv, priv->frequency);
|
|
mdelay(50);
|
|
max2165_debug_status(priv);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
if (ret != 0)
|
|
return -EREMOTEIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_get_frequency(struct dvb_frontend *fe, u32 *freq)
|
|
{
|
|
struct max2165_priv *priv = fe->tuner_priv;
|
|
dprintk("%s()\n", __func__);
|
|
*freq = priv->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
|
|
{
|
|
struct max2165_priv *priv = fe->tuner_priv;
|
|
dprintk("%s()\n", __func__);
|
|
|
|
*bw = priv->bandwidth;
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
struct max2165_priv *priv = fe->tuner_priv;
|
|
u16 lock_status = 0;
|
|
|
|
dprintk("%s()\n", __func__);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
max2165_debug_status(priv);
|
|
*status = lock_status;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_sleep(struct dvb_frontend *fe)
|
|
{
|
|
dprintk("%s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_init(struct dvb_frontend *fe)
|
|
{
|
|
struct max2165_priv *priv = fe->tuner_priv;
|
|
dprintk("%s()\n", __func__);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* Setup initial values */
|
|
/* Fractional Mode on */
|
|
max2165_write_reg(priv, REG_NDIV_FRAC2, 0x18);
|
|
/* LNA on */
|
|
max2165_write_reg(priv, REG_LNA, 0x01);
|
|
max2165_write_reg(priv, REG_PLL_CFG, 0x7A);
|
|
max2165_write_reg(priv, REG_TEST, 0x08);
|
|
max2165_write_reg(priv, REG_SHUTDOWN, 0x40);
|
|
max2165_write_reg(priv, REG_VCO_CTRL, 0x84);
|
|
max2165_write_reg(priv, REG_BASEBAND_CTRL, 0xC3);
|
|
max2165_write_reg(priv, REG_DC_OFFSET_CTRL, 0x75);
|
|
max2165_write_reg(priv, REG_DC_OFFSET_DAC, 0x00);
|
|
max2165_write_reg(priv, REG_ROM_TABLE_ADDR, 0x00);
|
|
|
|
max2165_set_osc(priv, priv->config->osc_clk);
|
|
|
|
max2165_read_rom_table(priv);
|
|
|
|
max2165_set_bandwidth(priv, BANDWIDTH_8_MHZ);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max2165_release(struct dvb_frontend *fe)
|
|
{
|
|
struct max2165_priv *priv = fe->tuner_priv;
|
|
dprintk("%s()\n", __func__);
|
|
|
|
kfree(priv);
|
|
fe->tuner_priv = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops max2165_tuner_ops = {
|
|
.info = {
|
|
.name = "Maxim MAX2165",
|
|
.frequency_min = 470000000,
|
|
.frequency_max = 780000000,
|
|
.frequency_step = 50000,
|
|
},
|
|
|
|
.release = max2165_release,
|
|
.init = max2165_init,
|
|
.sleep = max2165_sleep,
|
|
|
|
.set_params = max2165_set_params,
|
|
.set_analog_params = NULL,
|
|
.get_frequency = max2165_get_frequency,
|
|
.get_bandwidth = max2165_get_bandwidth,
|
|
.get_status = max2165_get_status
|
|
};
|
|
|
|
struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c,
|
|
struct max2165_config *cfg)
|
|
{
|
|
struct max2165_priv *priv = NULL;
|
|
|
|
dprintk("%s(%d-%04x)\n", __func__,
|
|
i2c ? i2c_adapter_id(i2c) : -1,
|
|
cfg ? cfg->i2c_address : -1);
|
|
|
|
priv = kzalloc(sizeof(struct max2165_priv), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return NULL;
|
|
|
|
memcpy(&fe->ops.tuner_ops, &max2165_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
priv->config = cfg;
|
|
priv->i2c = i2c;
|
|
fe->tuner_priv = priv;
|
|
|
|
max2165_init(fe);
|
|
max2165_debug_status(priv);
|
|
|
|
return fe;
|
|
}
|
|
EXPORT_SYMBOL(max2165_attach);
|
|
|
|
MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>");
|
|
MODULE_DESCRIPTION("Maxim MAX2165 silicon tuner driver");
|
|
MODULE_LICENSE("GPL");
|