![Lars Svensson](/assets/img/avatar_default.png)
Member screen_base in struct fb_info is declared with __iomem qualifier causing sparse warnings when used as a regular ponter. To avoid the warnings, instead use alternate non-__iomem pointer, screen_buffer, troughout the driver. Signed-off-by: Lars Svensson <lars1.svensson@sonymobile.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
303 lines
7.3 KiB
C
303 lines
7.3 KiB
C
/*
|
|
* FB driver for the Watterott LCD Controller
|
|
*
|
|
* Copyright (C) 2013 Noralf Tronnes
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "fbtft.h"
|
|
|
|
#define DRVNAME "fb_watterott"
|
|
#define WIDTH 320
|
|
#define HEIGHT 240
|
|
#define FPS 5
|
|
#define TXBUFLEN 1024
|
|
#define DEFAULT_BRIGHTNESS 50
|
|
|
|
#define CMD_VERSION 0x01
|
|
#define CMD_LCD_LED 0x10
|
|
#define CMD_LCD_RESET 0x11
|
|
#define CMD_LCD_ORIENTATION 0x20
|
|
#define CMD_LCD_DRAWIMAGE 0x27
|
|
#define COLOR_RGB323 8
|
|
#define COLOR_RGB332 9
|
|
#define COLOR_RGB233 10
|
|
#define COLOR_RGB565 16
|
|
|
|
static short mode = 565;
|
|
module_param(mode, short, 0);
|
|
MODULE_PARM_DESC(mode, "RGB color transfer mode: 332, 565 (default)");
|
|
|
|
static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
|
|
{
|
|
va_list args;
|
|
int i, ret;
|
|
u8 *buf = par->buf;
|
|
|
|
va_start(args, len);
|
|
for (i = 0; i < len; i++)
|
|
*buf++ = (u8)va_arg(args, unsigned int);
|
|
va_end(args);
|
|
|
|
fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par,
|
|
par->info->device, u8, par->buf, len, "%s: ", __func__);
|
|
|
|
ret = par->fbtftops.write(par, par->buf, len);
|
|
if (ret < 0) {
|
|
dev_err(par->info->device,
|
|
"write() failed and returned %d\n", ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
|
|
{
|
|
unsigned start_line, end_line;
|
|
u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset);
|
|
u16 *pos = par->txbuf.buf + 1;
|
|
u16 *buf16 = par->txbuf.buf + 10;
|
|
int i, j;
|
|
int ret = 0;
|
|
|
|
start_line = offset / par->info->fix.line_length;
|
|
end_line = start_line + (len / par->info->fix.line_length) - 1;
|
|
|
|
/* Set command header. pos: x, y, w, h */
|
|
((u8 *)par->txbuf.buf)[0] = CMD_LCD_DRAWIMAGE;
|
|
pos[0] = 0;
|
|
pos[2] = cpu_to_be16(par->info->var.xres);
|
|
pos[3] = cpu_to_be16(1);
|
|
((u8 *)par->txbuf.buf)[9] = COLOR_RGB565;
|
|
|
|
for (i = start_line; i <= end_line; i++) {
|
|
pos[1] = cpu_to_be16(i);
|
|
for (j = 0; j < par->info->var.xres; j++)
|
|
buf16[j] = cpu_to_be16(*vmem16++);
|
|
ret = par->fbtftops.write(par,
|
|
par->txbuf.buf, 10 + par->info->fix.line_length);
|
|
if (ret < 0)
|
|
return ret;
|
|
udelay(300);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define RGB565toRGB323(c) (((c&0xE000)>>8) | ((c&0600)>>6) | ((c&0x001C)>>2))
|
|
#define RGB565toRGB332(c) (((c&0xE000)>>8) | ((c&0700)>>6) | ((c&0x0018)>>3))
|
|
#define RGB565toRGB233(c) (((c&0xC000)>>8) | ((c&0700)>>5) | ((c&0x001C)>>2))
|
|
|
|
static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len)
|
|
{
|
|
unsigned start_line, end_line;
|
|
u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset);
|
|
u16 *pos = par->txbuf.buf + 1;
|
|
u8 *buf8 = par->txbuf.buf + 10;
|
|
int i, j;
|
|
int ret = 0;
|
|
|
|
start_line = offset / par->info->fix.line_length;
|
|
end_line = start_line + (len / par->info->fix.line_length) - 1;
|
|
|
|
/* Set command header. pos: x, y, w, h */
|
|
((u8 *)par->txbuf.buf)[0] = CMD_LCD_DRAWIMAGE;
|
|
pos[0] = 0;
|
|
pos[2] = cpu_to_be16(par->info->var.xres);
|
|
pos[3] = cpu_to_be16(1);
|
|
((u8 *)par->txbuf.buf)[9] = COLOR_RGB332;
|
|
|
|
for (i = start_line; i <= end_line; i++) {
|
|
pos[1] = cpu_to_be16(i);
|
|
for (j = 0; j < par->info->var.xres; j++) {
|
|
buf8[j] = RGB565toRGB332(*vmem16);
|
|
vmem16++;
|
|
}
|
|
ret = par->fbtftops.write(par,
|
|
par->txbuf.buf, 10 + par->info->var.xres);
|
|
if (ret < 0)
|
|
return ret;
|
|
udelay(700);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned firmware_version(struct fbtft_par *par)
|
|
{
|
|
u8 rxbuf[4] = {0, };
|
|
|
|
write_reg(par, CMD_VERSION);
|
|
par->fbtftops.read(par, rxbuf, 4);
|
|
if (rxbuf[1] != '.')
|
|
return 0;
|
|
|
|
return (rxbuf[0] - '0') << 8 | (rxbuf[2] - '0') << 4 | (rxbuf[3] - '0');
|
|
}
|
|
|
|
static int init_display(struct fbtft_par *par)
|
|
{
|
|
int ret;
|
|
unsigned version;
|
|
u8 save_mode;
|
|
|
|
/* enable SPI interface by having CS and MOSI low during reset */
|
|
save_mode = par->spi->mode;
|
|
par->spi->mode |= SPI_CS_HIGH;
|
|
ret = spi_setup(par->spi); /* set CS inactive low */
|
|
if (ret) {
|
|
dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
|
|
return ret;
|
|
}
|
|
write_reg(par, 0x00); /* make sure mode is set */
|
|
|
|
mdelay(50);
|
|
par->fbtftops.reset(par);
|
|
mdelay(1000);
|
|
par->spi->mode = save_mode;
|
|
ret = spi_setup(par->spi);
|
|
if (ret) {
|
|
dev_err(par->info->device, "Could not restore SPI mode\n");
|
|
return ret;
|
|
}
|
|
write_reg(par, 0x00);
|
|
|
|
version = firmware_version(par);
|
|
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Firmware version: %x.%02x\n",
|
|
version >> 8, version & 0xFF);
|
|
|
|
if (mode == 332)
|
|
par->fbtftops.write_vmem = write_vmem_8bit;
|
|
return 0;
|
|
}
|
|
|
|
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
|
{
|
|
/* not used on this controller */
|
|
}
|
|
|
|
static int set_var(struct fbtft_par *par)
|
|
{
|
|
u8 rotate;
|
|
|
|
/* this controller rotates clock wise */
|
|
switch (par->info->var.rotate) {
|
|
case 90:
|
|
rotate = 27;
|
|
break;
|
|
case 180:
|
|
rotate = 18;
|
|
break;
|
|
case 270:
|
|
rotate = 9;
|
|
break;
|
|
default:
|
|
rotate = 0;
|
|
}
|
|
write_reg(par, CMD_LCD_ORIENTATION, rotate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int verify_gpios(struct fbtft_par *par)
|
|
{
|
|
if (par->gpio.reset < 0) {
|
|
dev_err(par->info->device, "Missing 'reset' gpio. Aborting.\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FB_BACKLIGHT
|
|
static int backlight_chip_update_status(struct backlight_device *bd)
|
|
{
|
|
struct fbtft_par *par = bl_get_data(bd);
|
|
int brightness = bd->props.brightness;
|
|
|
|
fbtft_par_dbg(DEBUG_BACKLIGHT, par,
|
|
"%s: brightness=%d, power=%d, fb_blank=%d\n",
|
|
__func__, bd->props.brightness, bd->props.power,
|
|
bd->props.fb_blank);
|
|
|
|
if (bd->props.power != FB_BLANK_UNBLANK)
|
|
brightness = 0;
|
|
|
|
if (bd->props.fb_blank != FB_BLANK_UNBLANK)
|
|
brightness = 0;
|
|
|
|
write_reg(par, CMD_LCD_LED, brightness);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops bl_ops = {
|
|
.update_status = backlight_chip_update_status,
|
|
};
|
|
|
|
static void register_chip_backlight(struct fbtft_par *par)
|
|
{
|
|
struct backlight_device *bd;
|
|
struct backlight_properties bl_props = { 0, };
|
|
|
|
bl_props.type = BACKLIGHT_RAW;
|
|
bl_props.power = FB_BLANK_POWERDOWN;
|
|
bl_props.max_brightness = 100;
|
|
bl_props.brightness = DEFAULT_BRIGHTNESS;
|
|
|
|
bd = backlight_device_register(dev_driver_string(par->info->device),
|
|
par->info->device, par, &bl_ops, &bl_props);
|
|
if (IS_ERR(bd)) {
|
|
dev_err(par->info->device,
|
|
"cannot register backlight device (%ld)\n",
|
|
PTR_ERR(bd));
|
|
return;
|
|
}
|
|
par->info->bl_dev = bd;
|
|
|
|
if (!par->fbtftops.unregister_backlight)
|
|
par->fbtftops.unregister_backlight = fbtft_unregister_backlight;
|
|
}
|
|
#else
|
|
#define register_chip_backlight NULL
|
|
#endif
|
|
|
|
static struct fbtft_display display = {
|
|
.regwidth = 8,
|
|
.buswidth = 8,
|
|
.width = WIDTH,
|
|
.height = HEIGHT,
|
|
.fps = FPS,
|
|
.txbuflen = TXBUFLEN,
|
|
.fbtftops = {
|
|
.write_register = write_reg8_bus8,
|
|
.write_vmem = write_vmem,
|
|
.init_display = init_display,
|
|
.set_addr_win = set_addr_win,
|
|
.set_var = set_var,
|
|
.verify_gpios = verify_gpios,
|
|
.register_backlight = register_chip_backlight,
|
|
},
|
|
};
|
|
|
|
FBTFT_REGISTER_DRIVER(DRVNAME, "watterott,openlcd", &display);
|
|
|
|
MODULE_ALIAS("spi:" DRVNAME);
|
|
|
|
MODULE_DESCRIPTION("FB driver for the Watterott LCD Controller");
|
|
MODULE_AUTHOR("Noralf Tronnes");
|
|
MODULE_LICENSE("GPL");
|