alistair23-linux/include/linux/mfd/abx500/ab8500.h
Lee Jones c45eab2cb0 mfd: ab8500-debugfs: Prevent initialised field from being over-written
Due to the lack of parity in the way array fields have been named/
numbered, a mistake was made where more debug fields were declared
than actually existed.  In doing so, 2 fields were added, which
although unclear, were already declared in the array.  The result
was that the latter declarations trashed the former ones.

This patch places the array back in the correct order and removes
the offending NULL entries.

While we're at it, let's ensure this doesn't happen again by naming
each field properly and add a new *_LAST define to describe how
many fields there should be.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04 15:48:05 +01:00

519 lines
17 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
*/
#ifndef MFD_AB8500_H
#define MFD_AB8500_H
#include <linux/atomic.h>
#include <linux/mutex.h>
#include <linux/irqdomain.h>
struct device;
/*
* AB IC versions
*
* AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
* non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
* print of version string.
*/
enum ab8500_version {
AB8500_VERSION_AB8500 = 0x0,
AB8500_VERSION_AB8505 = 0x1,
AB8500_VERSION_AB9540 = 0x2,
AB8500_VERSION_AB8540 = 0x4,
AB8500_VERSION_UNDEFINED,
};
/* AB8500 CIDs*/
#define AB8500_CUTEARLY 0x00
#define AB8500_CUT1P0 0x10
#define AB8500_CUT1P1 0x11
#define AB8500_CUT1P2 0x12 /* Only valid for AB8540 */
#define AB8500_CUT2P0 0x20
#define AB8500_CUT3P0 0x30
#define AB8500_CUT3P3 0x33
/*
* AB8500 bank addresses
*/
#define AB8500_M_FSM_RANK 0x0
#define AB8500_SYS_CTRL1_BLOCK 0x1
#define AB8500_SYS_CTRL2_BLOCK 0x2
#define AB8500_REGU_CTRL1 0x3
#define AB8500_REGU_CTRL2 0x4
#define AB8500_USB 0x5
#define AB8500_TVOUT 0x6
#define AB8500_DBI 0x7
#define AB8500_ECI_AV_ACC 0x8
#define AB8500_RESERVED 0x9
#define AB8500_GPADC 0xA
#define AB8500_CHARGER 0xB
#define AB8500_GAS_GAUGE 0xC
#define AB8500_AUDIO 0xD
#define AB8500_INTERRUPT 0xE
#define AB8500_RTC 0xF
#define AB8500_MISC 0x10
#define AB8500_DEVELOPMENT 0x11
#define AB8500_DEBUG 0x12
#define AB8500_PROD_TEST 0x13
#define AB8500_STE_TEST 0x14
#define AB8500_OTP_EMUL 0x15
#define AB8500_DEBUG_FIELD_LAST 0x16
/*
* Interrupts
* Values used to index into array ab8500_irq_regoffset[] defined in
* drivers/mdf/ab8500-core.c
*/
/* Definitions for AB8500, AB9540 and AB8540 */
/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */
#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540/8540 */
#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540/8540 */
#define AB8500_INT_TEMP_WARM 3
#define AB8500_INT_PON_KEY2DB_F 4
#define AB8500_INT_PON_KEY2DB_R 5
#define AB8500_INT_PON_KEY1DB_F 6
#define AB8500_INT_PON_KEY1DB_R 7
/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
#define AB8500_INT_BATT_OVV 8
#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505/8540 */
#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505/8540 */
#define AB8500_INT_VBUS_DET_F 14
#define AB8500_INT_VBUS_DET_R 15
/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
#define AB8500_INT_VBUS_CH_DROP_END 16
#define AB8500_INT_RTC_60S 17
#define AB8500_INT_RTC_ALARM 18
#define AB8540_INT_BIF_INT 19
#define AB8500_INT_BAT_CTRL_INDB 20
#define AB8500_INT_CH_WD_EXP 21
#define AB8500_INT_VBUS_OVV 22
#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540/8540 */
/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
#define AB8500_INT_CCN_CONV_ACC 24
#define AB8500_INT_INT_AUD 25
#define AB8500_INT_CCEOC 26
#define AB8500_INT_CC_INT_CALIB 27
#define AB8500_INT_LOW_BAT_F 28
#define AB8500_INT_LOW_BAT_R 29
#define AB8500_INT_BUP_CHG_NOT_OK 30
#define AB8500_INT_BUP_CHG_OK 31
/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505/8540 */
#define AB8500_INT_ACC_DETECT_1DB_F 33
#define AB8500_INT_ACC_DETECT_1DB_R 34
#define AB8500_INT_ACC_DETECT_22DB_F 35
#define AB8500_INT_ACC_DETECT_22DB_R 36
#define AB8500_INT_ACC_DETECT_21DB_F 37
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
#define AB8500_INT_GPIO6R 40 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO7R 41 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO8R 42 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO9R 43 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO10R 44 /* not 8540 */
#define AB8500_INT_GPIO11R 45 /* not 8540 */
#define AB8500_INT_GPIO12R 46 /* not 8505/8540 */
#define AB8500_INT_GPIO13R 47 /* not 8540 */
/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
#define AB8500_INT_GPIO24R 48 /* not 8505/8540 */
#define AB8500_INT_GPIO25R 49 /* not 8505/8540 */
#define AB8500_INT_GPIO36R 50 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO37R 51 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO38R 52 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO39R 53 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO40R 54 /* not 8540 */
#define AB8500_INT_GPIO41R 55 /* not 8540 */
/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */
#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */
#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */
#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */
#define AB8500_INT_GPIO10F 60
#define AB8500_INT_GPIO11F 61
#define AB8500_INT_GPIO12F 62 /* not 8505 */
#define AB8500_INT_GPIO13F 63
/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
#define AB8500_INT_GPIO24F 64 /* not 8505/8540 */
#define AB8500_INT_GPIO25F 65 /* not 8505/8540 */
#define AB8500_INT_GPIO36F 66 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO37F 67 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO38F 68 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO39F 69 /* not 8505/9540/8540 */
#define AB8500_INT_GPIO40F 70 /* not 8540 */
#define AB8500_INT_GPIO41F 71 /* not 8540 */
/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
#define AB8500_INT_ADP_SOURCE_ERROR 72
#define AB8500_INT_ADP_SINK_ERROR 73
#define AB8500_INT_ADP_PROBE_PLUG 74
#define AB8500_INT_ADP_PROBE_UNPLUG 75
#define AB8500_INT_ADP_SENSE_OFF 76
#define AB8500_INT_USB_PHY_POWER_ERR 78
#define AB8500_INT_USB_LINK_STATUS 79
/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
#define AB8500_INT_BTEMP_LOW 80
#define AB8500_INT_BTEMP_LOW_MEDIUM 81
#define AB8500_INT_BTEMP_MEDIUM_HIGH 82
#define AB8500_INT_BTEMP_HIGH 83
/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
#define AB8500_INT_SRP_DETECT 88
#define AB8500_INT_USB_CHARGER_NOT_OKR 89
#define AB8500_INT_ID_WAKEUP_R 90
#define AB8500_INT_ID_DET_PLUGR 91 /* 8505/9540 cut2.0 */
#define AB8500_INT_ID_DET_R1R 92
#define AB8500_INT_ID_DET_R2R 93
#define AB8500_INT_ID_DET_R3R 94
#define AB8500_INT_ID_DET_R4R 95
/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
#define AB8500_INT_ID_WAKEUP_F 96 /* not 8505/9540 */
#define AB8500_INT_ID_DET_PLUGF 97 /* 8505/9540 cut2.0 */
#define AB8500_INT_ID_DET_R1F 98 /* not 8505/9540 */
#define AB8500_INT_ID_DET_R2F 99 /* not 8505/9540 */
#define AB8500_INT_ID_DET_R3F 100 /* not 8505/9540 */
#define AB8500_INT_ID_DET_R4F 101 /* not 8505/9540 */
#define AB8500_INT_CHAUTORESTARTAFTSEC 102 /* not 8505/9540 */
#define AB8500_INT_CHSTOPBYSEC 103
/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
#define AB8500_INT_USB_CH_TH_PROT_F 104
#define AB8500_INT_USB_CH_TH_PROT_R 105
#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */
#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */
#define AB8500_INT_CHCURLIMNOHSCHIRP 109
#define AB8500_INT_CHCURLIMHSCHIRP 110
#define AB8500_INT_XTAL32K_KO 111
/* Definitions for AB9540 / AB8505 */
/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
#define AB9540_INT_GPIO50R 113 /* not 8540 */
#define AB9540_INT_GPIO51R 114 /* not 8505/8540 */
#define AB9540_INT_GPIO52R 115 /* not 8540 */
#define AB9540_INT_GPIO53R 116 /* not 8540 */
#define AB9540_INT_GPIO54R 117 /* not 8505/8540 */
#define AB9540_INT_IEXT_CH_RF_BFN_R 118
/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
#define AB9540_INT_GPIO50F 121 /* not 8540 */
#define AB9540_INT_GPIO51F 122 /* not 8505/8540 */
#define AB9540_INT_GPIO52F 123 /* not 8540 */
#define AB9540_INT_GPIO53F 124 /* not 8540 */
#define AB9540_INT_GPIO54F 125 /* not 8505/8540 */
#define AB9540_INT_IEXT_CH_RF_BFN_F 126
/* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */
#define AB8505_INT_KEYSTUCK 128
#define AB8505_INT_IKR 129
#define AB8505_INT_IKP 130
#define AB8505_INT_KP 131
#define AB8505_INT_KEYDEGLITCH 132
#define AB8505_INT_MODPWRSTATUSF 134
#define AB8505_INT_MODPWRSTATUSR 135
/* ab8500_irq_regoffset[17] -> IT[Source|Latch|Mask]6 */
#define AB8500_INT_HOOK_DET_NEG_F 138
#define AB8500_INT_HOOK_DET_NEG_R 139
#define AB8500_INT_HOOK_DET_POS_F 140
#define AB8500_INT_HOOK_DET_POS_R 141
#define AB8500_INT_PLUG_DET_COMP_F 142
#define AB8500_INT_PLUG_DET_COMP_R 143
/* ab8500_irq_regoffset[18] -> IT[Source|Latch|Mask]23 */
#define AB8505_INT_COLL 144
#define AB8505_INT_RESERR 145
#define AB8505_INT_FRAERR 146
#define AB8505_INT_COMERR 147
#define AB8505_INT_SPDSET 148
#define AB8505_INT_DSENT 149
#define AB8505_INT_DREC 150
#define AB8505_INT_ACC_INT 151
/* ab8500_irq_regoffset[19] -> IT[Source|Latch|Mask]24 */
#define AB8505_INT_NOPINT 152
/* ab8540_irq_regoffset[20] -> IT[Source|Latch|Mask]26 */
#define AB8540_INT_IDPLUGDETCOMPF 160
#define AB8540_INT_IDPLUGDETCOMPR 161
#define AB8540_INT_FMDETCOMPLOF 162
#define AB8540_INT_FMDETCOMPLOR 163
#define AB8540_INT_FMDETCOMPHIF 164
#define AB8540_INT_FMDETCOMPHIR 165
#define AB8540_INT_ID5VDETCOMPF 166
#define AB8540_INT_ID5VDETCOMPR 167
/* ab8540_irq_regoffset[21] -> IT[Source|Latch|Mask]27 */
#define AB8540_INT_GPIO43F 168
#define AB8540_INT_GPIO43R 169
#define AB8540_INT_GPIO44F 170
#define AB8540_INT_GPIO44R 171
#define AB8540_INT_KEYPOSDETCOMPF 172
#define AB8540_INT_KEYPOSDETCOMPR 173
#define AB8540_INT_KEYNEGDETCOMPF 174
#define AB8540_INT_KEYNEGDETCOMPR 175
/* ab8540_irq_regoffset[22] -> IT[Source|Latch|Mask]28 */
#define AB8540_INT_GPIO1VBATF 176
#define AB8540_INT_GPIO1VBATR 177
#define AB8540_INT_GPIO2VBATF 178
#define AB8540_INT_GPIO2VBATR 179
#define AB8540_INT_GPIO3VBATF 180
#define AB8540_INT_GPIO3VBATR 181
#define AB8540_INT_GPIO4VBATF 182
#define AB8540_INT_GPIO4VBATR 183
/* ab8540_irq_regoffset[23] -> IT[Source|Latch|Mask]29 */
#define AB8540_INT_SYSCLKREQ2F 184
#define AB8540_INT_SYSCLKREQ2R 185
#define AB8540_INT_SYSCLKREQ3F 186
#define AB8540_INT_SYSCLKREQ3R 187
#define AB8540_INT_SYSCLKREQ4F 188
#define AB8540_INT_SYSCLKREQ4R 189
#define AB8540_INT_SYSCLKREQ5F 190
#define AB8540_INT_SYSCLKREQ5R 191
/* ab8540_irq_regoffset[24] -> IT[Source|Latch|Mask]30 */
#define AB8540_INT_PWMOUT1F 192
#define AB8540_INT_PWMOUT1R 193
#define AB8540_INT_PWMCTRL0F 194
#define AB8540_INT_PWMCTRL0R 195
#define AB8540_INT_PWMCTRL1F 196
#define AB8540_INT_PWMCTRL1R 197
#define AB8540_INT_SYSCLKREQ6F 198
#define AB8540_INT_SYSCLKREQ6R 199
/* ab8540_irq_regoffset[25] -> IT[Source|Latch|Mask]31 */
#define AB8540_INT_PWMEXTVIBRA1F 200
#define AB8540_INT_PWMEXTVIBRA1R 201
#define AB8540_INT_PWMEXTVIBRA2F 202
#define AB8540_INT_PWMEXTVIBRA2R 203
#define AB8540_INT_PWMOUT2F 204
#define AB8540_INT_PWMOUT2R 205
#define AB8540_INT_PWMOUT3F 206
#define AB8540_INT_PWMOUT3R 207
/* ab8540_irq_regoffset[26] -> IT[Source|Latch|Mask]32 */
#define AB8540_INT_ADDATA2F 208
#define AB8540_INT_ADDATA2R 209
#define AB8540_INT_DADATA2F 210
#define AB8540_INT_DADATA2R 211
#define AB8540_INT_FSYNC2F 212
#define AB8540_INT_FSYNC2R 213
#define AB8540_INT_BITCLK2F 214
#define AB8540_INT_BITCLK2R 215
/* ab8540_irq_regoffset[27] -> IT[Source|Latch|Mask]33 */
#define AB8540_INT_RTC_1S 216
/*
* AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
* entire platform. This is a "compile time" constant so this must be set to
* the largest possible value that may be encountered with different AB SOCs.
* Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
* which is larger.
*/
#define AB8500_NR_IRQS 112
#define AB8505_NR_IRQS 153
#define AB9540_NR_IRQS 153
#define AB8540_NR_IRQS 216
/* This is set to the roof of any AB8500 chip variant IRQ counts */
#define AB8500_MAX_NR_IRQS AB8540_NR_IRQS
#define AB8500_NUM_IRQ_REGS 14
#define AB9540_NUM_IRQ_REGS 20
#define AB8540_NUM_IRQ_REGS 27
/* Turn On Status Event */
#define AB8500_POR_ON_VBAT 0x01
#define AB8500_POW_KEY_1_ON 0x02
#define AB8500_POW_KEY_2_ON 0x04
#define AB8500_RTC_ALARM 0x08
#define AB8500_MAIN_CH_DET 0x10
#define AB8500_VBUS_DET 0x20
#define AB8500_USB_ID_DET 0x40
/**
* struct ab8500 - ab8500 internal structure
* @dev: parent device
* @lock: read/write operations lock
* @irq_lock: genirq bus lock
* @transfer_ongoing: 0 if no transfer ongoing
* @irq: irq line
* @irq_domain: irq domain
* @version: chip version id (e.g. ab8500 or ab9540)
* @chip_id: chip revision id
* @write: register write
* @write_masked: masked register write
* @read: register read
* @rx_buf: rx buf for SPI
* @tx_buf: tx buf for SPI
* @mask: cache of IRQ regs for bus lock
* @oldmask: cache of previous IRQ regs for bus lock
* @mask_size: Actual number of valid entries in mask[], oldmask[] and
* irq_reg_offset
* @irq_reg_offset: Array of offsets into IRQ registers
*/
struct ab8500 {
struct device *dev;
struct mutex lock;
struct mutex irq_lock;
atomic_t transfer_ongoing;
int irq;
struct irq_domain *domain;
enum ab8500_version version;
u8 chip_id;
int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
int (*read)(struct ab8500 *ab8500, u16 addr);
unsigned long tx_buf[4];
unsigned long rx_buf[4];
u8 *mask;
u8 *oldmask;
int mask_size;
const int *irq_reg_offset;
int it_latchhier_num;
};
struct ab8500_regulator_platform_data;
struct ab8500_codec_platform_data;
struct ab8500_sysctrl_platform_data;
/**
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @init: board-specific initialization after detection of ab8500
* @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
void (*init) (struct ab8500 *);
struct ab8500_regulator_platform_data *regulator;
struct ab8500_codec_platform_data *codec;
struct ab8500_sysctrl_platform_data *sysctrl;
};
extern int ab8500_init(struct ab8500 *ab8500,
enum ab8500_version version);
extern int ab8500_exit(struct ab8500 *ab8500);
extern int ab8500_suspend(struct ab8500 *ab8500);
static inline int is_ab8500(struct ab8500 *ab)
{
return ab->version == AB8500_VERSION_AB8500;
}
static inline int is_ab8505(struct ab8500 *ab)
{
return ab->version == AB8500_VERSION_AB8505;
}
static inline int is_ab9540(struct ab8500 *ab)
{
return ab->version == AB8500_VERSION_AB9540;
}
static inline int is_ab8540(struct ab8500 *ab)
{
return ab->version == AB8500_VERSION_AB8540;
}
/* exclude also ab8505, ab9540... */
static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
{
return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
}
/* exclude also ab8505, ab9540... */
static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
{
return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
}
/* exclude also ab8505, ab9540... */
static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
{
return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
}
static inline int is_ab8500_3p3_or_earlier(struct ab8500 *ab)
{
return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT3P3));
}
/* exclude also ab8505, ab9540... */
static inline int is_ab8500_2p0(struct ab8500 *ab)
{
return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
}
static inline int is_ab8505_1p0_or_earlier(struct ab8500 *ab)
{
return (is_ab8505(ab) && (ab->chip_id <= AB8500_CUT1P0));
}
static inline int is_ab8505_2p0(struct ab8500 *ab)
{
return (is_ab8505(ab) && (ab->chip_id == AB8500_CUT2P0));
}
static inline int is_ab9540_1p0_or_earlier(struct ab8500 *ab)
{
return (is_ab9540(ab) && (ab->chip_id <= AB8500_CUT1P0));
}
static inline int is_ab9540_2p0(struct ab8500 *ab)
{
return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT2P0));
}
/*
* Be careful, the marketing name for this chip is 2.1
* but the value read from the chip is 3.0 (0x30)
*/
static inline int is_ab9540_3p0(struct ab8500 *ab)
{
return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT3P0));
}
static inline int is_ab8540_1p0_or_earlier(struct ab8500 *ab)
{
return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P0);
}
static inline int is_ab8540_1p1_or_earlier(struct ab8500 *ab)
{
return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P1);
}
static inline int is_ab8540_1p2_or_earlier(struct ab8500 *ab)
{
return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P2);
}
static inline int is_ab8540_2p0_or_earlier(struct ab8500 *ab)
{
return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT2P0);
}
static inline int is_ab8540_2p0(struct ab8500 *ab)
{
return is_ab8540(ab) && (ab->chip_id == AB8500_CUT2P0);
}
static inline int is_ab8505_2p0_earlier(struct ab8500 *ab)
{
return (is_ab8505(ab) && (ab->chip_id < AB8500_CUT2P0));
}
static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab)
{
return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0));
}
void ab8500_override_turn_on_stat(u8 mask, u8 set);
#ifdef CONFIG_AB8500_DEBUG
extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
void ab8500_dump_all_banks(struct device *dev);
void ab8500_debug_register_interrupt(int line);
#else
static inline void ab8500_dump_all_banks(struct device *dev) {}
static inline void ab8500_debug_register_interrupt(int line) {}
#endif
#endif /* MFD_AB8500_H */