![Linus Walleij](/assets/img/avatar_default.png)
This makes it possible to probe the X1205 RTC from the device tree. This is needed when adding device tree boot support for the IXP4xx-based NSLU2 which has this RTC. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
699 lines
16 KiB
C
699 lines
16 KiB
C
/*
|
|
* An i2c driver for the Xicor/Intersil X1205 RTC
|
|
* Copyright 2004 Karen Spearel
|
|
* Copyright 2005 Alessandro Zummo
|
|
*
|
|
* please send all reports to:
|
|
* Karen Spearel <kas111 at gmail dot com>
|
|
* Alessandro Zummo <a.zummo@towertech.it>
|
|
*
|
|
* based on a lot of other RTC drivers.
|
|
*
|
|
* Information and datasheet:
|
|
* http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/* offsets into CCR area */
|
|
|
|
#define CCR_SEC 0
|
|
#define CCR_MIN 1
|
|
#define CCR_HOUR 2
|
|
#define CCR_MDAY 3
|
|
#define CCR_MONTH 4
|
|
#define CCR_YEAR 5
|
|
#define CCR_WDAY 6
|
|
#define CCR_Y2K 7
|
|
|
|
#define X1205_REG_SR 0x3F /* status register */
|
|
#define X1205_REG_Y2K 0x37
|
|
#define X1205_REG_DW 0x36
|
|
#define X1205_REG_YR 0x35
|
|
#define X1205_REG_MO 0x34
|
|
#define X1205_REG_DT 0x33
|
|
#define X1205_REG_HR 0x32
|
|
#define X1205_REG_MN 0x31
|
|
#define X1205_REG_SC 0x30
|
|
#define X1205_REG_DTR 0x13
|
|
#define X1205_REG_ATR 0x12
|
|
#define X1205_REG_INT 0x11
|
|
#define X1205_REG_0 0x10
|
|
#define X1205_REG_Y2K1 0x0F
|
|
#define X1205_REG_DWA1 0x0E
|
|
#define X1205_REG_YRA1 0x0D
|
|
#define X1205_REG_MOA1 0x0C
|
|
#define X1205_REG_DTA1 0x0B
|
|
#define X1205_REG_HRA1 0x0A
|
|
#define X1205_REG_MNA1 0x09
|
|
#define X1205_REG_SCA1 0x08
|
|
#define X1205_REG_Y2K0 0x07
|
|
#define X1205_REG_DWA0 0x06
|
|
#define X1205_REG_YRA0 0x05
|
|
#define X1205_REG_MOA0 0x04
|
|
#define X1205_REG_DTA0 0x03
|
|
#define X1205_REG_HRA0 0x02
|
|
#define X1205_REG_MNA0 0x01
|
|
#define X1205_REG_SCA0 0x00
|
|
|
|
#define X1205_CCR_BASE 0x30 /* Base address of CCR */
|
|
#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
|
|
|
|
#define X1205_SR_RTCF 0x01 /* Clock failure */
|
|
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
|
|
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
|
|
#define X1205_SR_AL0 0x20 /* Alarm 0 match */
|
|
|
|
#define X1205_DTR_DTR0 0x01
|
|
#define X1205_DTR_DTR1 0x02
|
|
#define X1205_DTR_DTR2 0x04
|
|
|
|
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
|
|
|
|
#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
|
|
|
|
static struct i2c_driver x1205_driver;
|
|
|
|
/*
|
|
* In the routines that deal directly with the x1205 hardware, we use
|
|
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
|
|
* Epoch is initialized as 2000. Time is set to UTC.
|
|
*/
|
|
static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
|
|
unsigned char reg_base)
|
|
{
|
|
unsigned char dt_addr[2] = { 0, reg_base };
|
|
unsigned char buf[8];
|
|
int i;
|
|
|
|
struct i2c_msg msgs[] = {
|
|
{/* setup read ptr */
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = dt_addr
|
|
},
|
|
{/* read date */
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 8,
|
|
.buf = buf
|
|
},
|
|
};
|
|
|
|
/* read date registers */
|
|
if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
|
|
dev_err(&client->dev, "%s: read error\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
dev_dbg(&client->dev,
|
|
"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
|
|
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
|
|
__func__,
|
|
buf[0], buf[1], buf[2], buf[3],
|
|
buf[4], buf[5], buf[6], buf[7]);
|
|
|
|
/* Mask out the enable bits if these are alarm registers */
|
|
if (reg_base < X1205_CCR_BASE)
|
|
for (i = 0; i <= 4; i++)
|
|
buf[i] &= 0x7F;
|
|
|
|
tm->tm_sec = bcd2bin(buf[CCR_SEC]);
|
|
tm->tm_min = bcd2bin(buf[CCR_MIN]);
|
|
tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
|
|
tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
|
|
tm->tm_mon = bcd2bin(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
|
|
tm->tm_year = bcd2bin(buf[CCR_YEAR])
|
|
+ (bcd2bin(buf[CCR_Y2K]) * 100) - 1900;
|
|
tm->tm_wday = buf[CCR_WDAY];
|
|
|
|
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
|
|
"mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
__func__,
|
|
tm->tm_sec, tm->tm_min, tm->tm_hour,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
|
|
{
|
|
static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
|
|
|
|
struct i2c_msg msgs[] = {
|
|
{ /* setup read ptr */
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = sr_addr
|
|
},
|
|
{ /* read status */
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = sr
|
|
},
|
|
};
|
|
|
|
/* read status register */
|
|
if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
|
|
dev_err(&client->dev, "%s: read error\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
|
|
u8 reg_base, unsigned char alm_enable)
|
|
{
|
|
int i, xfer;
|
|
unsigned char rdata[10] = { 0, reg_base };
|
|
unsigned char *buf = rdata + 2;
|
|
|
|
static const unsigned char wel[3] = { 0, X1205_REG_SR,
|
|
X1205_SR_WEL };
|
|
|
|
static const unsigned char rwel[3] = { 0, X1205_REG_SR,
|
|
X1205_SR_WEL | X1205_SR_RWEL };
|
|
|
|
static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
|
|
|
|
dev_dbg(&client->dev,
|
|
"%s: sec=%d min=%d hour=%d mday=%d mon=%d year=%d wday=%d\n",
|
|
__func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday,
|
|
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
buf[CCR_SEC] = bin2bcd(tm->tm_sec);
|
|
buf[CCR_MIN] = bin2bcd(tm->tm_min);
|
|
|
|
/* set hour and 24hr bit */
|
|
buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
|
|
|
|
buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
|
|
|
|
/* month, 1 - 12 */
|
|
buf[CCR_MONTH] = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* year, since the rtc epoch*/
|
|
buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
|
|
buf[CCR_WDAY] = tm->tm_wday & 0x07;
|
|
buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100);
|
|
|
|
/* If writing alarm registers, set compare bits on registers 0-4 */
|
|
if (reg_base < X1205_CCR_BASE)
|
|
for (i = 0; i <= 4; i++)
|
|
buf[i] |= 0x80;
|
|
|
|
/* this sequence is required to unlock the chip */
|
|
xfer = i2c_master_send(client, wel, 3);
|
|
if (xfer != 3) {
|
|
dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
|
|
return -EIO;
|
|
}
|
|
|
|
xfer = i2c_master_send(client, rwel, 3);
|
|
if (xfer != 3) {
|
|
dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
|
|
return -EIO;
|
|
}
|
|
|
|
xfer = i2c_master_send(client, rdata, sizeof(rdata));
|
|
if (xfer != sizeof(rdata)) {
|
|
dev_err(&client->dev,
|
|
"%s: result=%d addr=%02x, data=%02x\n",
|
|
__func__,
|
|
xfer, rdata[1], rdata[2]);
|
|
return -EIO;
|
|
}
|
|
|
|
/* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
|
|
if (reg_base < X1205_CCR_BASE) {
|
|
unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
|
|
|
|
msleep(10);
|
|
|
|
/* ...and set or clear the AL0E bit in the INT register */
|
|
|
|
/* Need to set RWEL again as the write has cleared it */
|
|
xfer = i2c_master_send(client, rwel, 3);
|
|
if (xfer != 3) {
|
|
dev_err(&client->dev,
|
|
"%s: aloe rwel - %d\n",
|
|
__func__,
|
|
xfer);
|
|
return -EIO;
|
|
}
|
|
|
|
if (alm_enable)
|
|
al0e[2] = X1205_INT_AL0E;
|
|
|
|
xfer = i2c_master_send(client, al0e, 3);
|
|
if (xfer != 3) {
|
|
dev_err(&client->dev,
|
|
"%s: al0e - %d\n",
|
|
__func__,
|
|
xfer);
|
|
return -EIO;
|
|
}
|
|
|
|
/* and wait 10msec again for this write to complete */
|
|
msleep(10);
|
|
}
|
|
|
|
/* disable further writes */
|
|
xfer = i2c_master_send(client, diswe, 3);
|
|
if (xfer != 3) {
|
|
dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int x1205_fix_osc(struct i2c_client *client)
|
|
{
|
|
int err;
|
|
struct rtc_time tm;
|
|
|
|
memset(&tm, 0, sizeof(tm));
|
|
|
|
err = x1205_set_datetime(client, &tm, X1205_CCR_BASE, 0);
|
|
if (err < 0)
|
|
dev_err(&client->dev, "unable to restart the oscillator\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int x1205_get_dtrim(struct i2c_client *client, int *trim)
|
|
{
|
|
unsigned char dtr;
|
|
static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
|
|
|
|
struct i2c_msg msgs[] = {
|
|
{ /* setup read ptr */
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = dtr_addr
|
|
},
|
|
{ /* read dtr */
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = &dtr
|
|
},
|
|
};
|
|
|
|
/* read dtr register */
|
|
if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
|
|
dev_err(&client->dev, "%s: read error\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);
|
|
|
|
*trim = 0;
|
|
|
|
if (dtr & X1205_DTR_DTR0)
|
|
*trim += 20;
|
|
|
|
if (dtr & X1205_DTR_DTR1)
|
|
*trim += 10;
|
|
|
|
if (dtr & X1205_DTR_DTR2)
|
|
*trim = -*trim;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int x1205_get_atrim(struct i2c_client *client, int *trim)
|
|
{
|
|
s8 atr;
|
|
static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
|
|
|
|
struct i2c_msg msgs[] = {
|
|
{/* setup read ptr */
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = atr_addr
|
|
},
|
|
{/* read atr */
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = &atr
|
|
},
|
|
};
|
|
|
|
/* read atr register */
|
|
if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
|
|
dev_err(&client->dev, "%s: read error\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);
|
|
|
|
/* atr is a two's complement value on 6 bits,
|
|
* perform sign extension. The formula is
|
|
* Catr = (atr * 0.25pF) + 11.00pF.
|
|
*/
|
|
atr = sign_extend32(atr, 5);
|
|
|
|
dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);
|
|
|
|
*trim = (atr * 250) + 11000;
|
|
|
|
dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct x1205_limit {
|
|
unsigned char reg, mask, min, max;
|
|
};
|
|
|
|
static int x1205_validate_client(struct i2c_client *client)
|
|
{
|
|
int i, xfer;
|
|
|
|
/* Probe array. We will read the register at the specified
|
|
* address and check if the given bits are zero.
|
|
*/
|
|
static const unsigned char probe_zero_pattern[] = {
|
|
/* register, mask */
|
|
X1205_REG_SR, 0x18,
|
|
X1205_REG_DTR, 0xF8,
|
|
X1205_REG_ATR, 0xC0,
|
|
X1205_REG_INT, 0x18,
|
|
X1205_REG_0, 0xFF,
|
|
};
|
|
|
|
static const struct x1205_limit probe_limits_pattern[] = {
|
|
/* register, mask, min, max */
|
|
{ X1205_REG_Y2K, 0xFF, 19, 20 },
|
|
{ X1205_REG_DW, 0xFF, 0, 6 },
|
|
{ X1205_REG_YR, 0xFF, 0, 99 },
|
|
{ X1205_REG_MO, 0xFF, 0, 12 },
|
|
{ X1205_REG_DT, 0xFF, 0, 31 },
|
|
{ X1205_REG_HR, 0x7F, 0, 23 },
|
|
{ X1205_REG_MN, 0xFF, 0, 59 },
|
|
{ X1205_REG_SC, 0xFF, 0, 59 },
|
|
{ X1205_REG_Y2K1, 0xFF, 19, 20 },
|
|
{ X1205_REG_Y2K0, 0xFF, 19, 20 },
|
|
};
|
|
|
|
/* check that registers have bits a 0 where expected */
|
|
for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
|
|
unsigned char buf;
|
|
|
|
unsigned char addr[2] = { 0, probe_zero_pattern[i] };
|
|
|
|
struct i2c_msg msgs[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = addr
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = &buf
|
|
},
|
|
};
|
|
|
|
xfer = i2c_transfer(client->adapter, msgs, 2);
|
|
if (xfer != 2) {
|
|
dev_err(&client->dev,
|
|
"%s: could not read register %x\n",
|
|
__func__, probe_zero_pattern[i]);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
if ((buf & probe_zero_pattern[i+1]) != 0) {
|
|
dev_err(&client->dev,
|
|
"%s: register=%02x, zero pattern=%d, value=%x\n",
|
|
__func__, probe_zero_pattern[i], i, buf);
|
|
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* check limits (only registers with bcd values) */
|
|
for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
|
|
unsigned char reg, value;
|
|
|
|
unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
|
|
|
|
struct i2c_msg msgs[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = addr
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = ®
|
|
},
|
|
};
|
|
|
|
xfer = i2c_transfer(client->adapter, msgs, 2);
|
|
if (xfer != 2) {
|
|
dev_err(&client->dev,
|
|
"%s: could not read register %x\n",
|
|
__func__, probe_limits_pattern[i].reg);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
value = bcd2bin(reg & probe_limits_pattern[i].mask);
|
|
|
|
if (value > probe_limits_pattern[i].max ||
|
|
value < probe_limits_pattern[i].min) {
|
|
dev_dbg(&client->dev,
|
|
"%s: register=%x, lim pattern=%d, value=%d\n",
|
|
__func__, probe_limits_pattern[i].reg,
|
|
i, value);
|
|
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
int err;
|
|
unsigned char intreg, status;
|
|
static unsigned char int_addr[2] = { 0, X1205_REG_INT };
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct i2c_msg msgs[] = {
|
|
{ /* setup read ptr */
|
|
.addr = client->addr,
|
|
.len = 2,
|
|
.buf = int_addr
|
|
},
|
|
{/* read INT register */
|
|
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = &intreg
|
|
},
|
|
};
|
|
|
|
/* read interrupt register and status register */
|
|
if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
|
|
dev_err(&client->dev, "%s: read error\n", __func__);
|
|
return -EIO;
|
|
}
|
|
err = x1205_get_status(client, &status);
|
|
if (err == 0) {
|
|
alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
|
|
alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
|
|
err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
return x1205_set_datetime(to_i2c_client(dev),
|
|
&alrm->time, X1205_ALM0_BASE, alrm->enabled);
|
|
}
|
|
|
|
static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
return x1205_get_datetime(to_i2c_client(dev),
|
|
tm, X1205_CCR_BASE);
|
|
}
|
|
|
|
static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
return x1205_set_datetime(to_i2c_client(dev),
|
|
tm, X1205_CCR_BASE, 0);
|
|
}
|
|
|
|
static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
|
|
{
|
|
int err, dtrim, atrim;
|
|
|
|
err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
|
|
if (!err)
|
|
seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
|
|
|
|
err = x1205_get_atrim(to_i2c_client(dev), &atrim);
|
|
if (!err)
|
|
seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
|
|
atrim / 1000, atrim % 1000);
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops x1205_rtc_ops = {
|
|
.proc = x1205_rtc_proc,
|
|
.read_time = x1205_rtc_read_time,
|
|
.set_time = x1205_rtc_set_time,
|
|
.read_alarm = x1205_rtc_read_alarm,
|
|
.set_alarm = x1205_rtc_set_alarm,
|
|
};
|
|
|
|
static ssize_t x1205_sysfs_show_atrim(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int err, atrim;
|
|
|
|
err = x1205_get_atrim(to_i2c_client(dev), &atrim);
|
|
if (err)
|
|
return err;
|
|
|
|
return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
|
|
}
|
|
static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
|
|
|
|
static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int err, dtrim;
|
|
|
|
err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
|
|
if (err)
|
|
return err;
|
|
|
|
return sprintf(buf, "%d ppm\n", dtrim);
|
|
}
|
|
static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
|
|
|
|
static int x1205_sysfs_register(struct device *dev)
|
|
{
|
|
int err;
|
|
|
|
err = device_create_file(dev, &dev_attr_atrim);
|
|
if (err)
|
|
return err;
|
|
|
|
err = device_create_file(dev, &dev_attr_dtrim);
|
|
if (err)
|
|
device_remove_file(dev, &dev_attr_atrim);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void x1205_sysfs_unregister(struct device *dev)
|
|
{
|
|
device_remove_file(dev, &dev_attr_atrim);
|
|
device_remove_file(dev, &dev_attr_dtrim);
|
|
}
|
|
|
|
|
|
static int x1205_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int err = 0;
|
|
unsigned char sr;
|
|
struct rtc_device *rtc;
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
|
|
return -ENODEV;
|
|
|
|
if (x1205_validate_client(client) < 0)
|
|
return -ENODEV;
|
|
|
|
rtc = devm_rtc_device_register(&client->dev, x1205_driver.driver.name,
|
|
&x1205_rtc_ops, THIS_MODULE);
|
|
|
|
if (IS_ERR(rtc))
|
|
return PTR_ERR(rtc);
|
|
|
|
i2c_set_clientdata(client, rtc);
|
|
|
|
/* Check for power failures and eventually enable the osc */
|
|
err = x1205_get_status(client, &sr);
|
|
if (!err) {
|
|
if (sr & X1205_SR_RTCF) {
|
|
dev_err(&client->dev,
|
|
"power failure detected, "
|
|
"please set the clock\n");
|
|
udelay(50);
|
|
x1205_fix_osc(client);
|
|
}
|
|
} else {
|
|
dev_err(&client->dev, "couldn't read status\n");
|
|
}
|
|
|
|
err = x1205_sysfs_register(&client->dev);
|
|
if (err)
|
|
dev_err(&client->dev, "Unable to create sysfs entries\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int x1205_remove(struct i2c_client *client)
|
|
{
|
|
x1205_sysfs_unregister(&client->dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id x1205_id[] = {
|
|
{ "x1205", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, x1205_id);
|
|
|
|
static const struct of_device_id x1205_dt_ids[] = {
|
|
{ .compatible = "xircom,x1205", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, x1205_dt_ids);
|
|
|
|
static struct i2c_driver x1205_driver = {
|
|
.driver = {
|
|
.name = "rtc-x1205",
|
|
.of_match_table = x1205_dt_ids,
|
|
},
|
|
.probe = x1205_probe,
|
|
.remove = x1205_remove,
|
|
.id_table = x1205_id,
|
|
};
|
|
|
|
module_i2c_driver(x1205_driver);
|
|
|
|
MODULE_AUTHOR(
|
|
"Karen Spearel <kas111 at gmail dot com>, "
|
|
"Alessandro Zummo <a.zummo@towertech.it>");
|
|
MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
|
|
MODULE_LICENSE("GPL");
|