486 lines
9.2 KiB
Plaintext
486 lines
9.2 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
|
|
* Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-a64.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
model = "Pinebook";
|
|
compatible = "pine64,pinebook", "allwinner,sun50i-a64";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
ethernet0 = &rtl8723cs;
|
|
};
|
|
|
|
vdd_bl: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "bl-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
|
|
enable-active-high;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 50000 0>;
|
|
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
|
|
default-brightness-level = <2>;
|
|
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
|
|
power-supply = <&vdd_bl>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
|
|
framebuffer-lcd {
|
|
panel-supply = <®_dc1sw>;
|
|
dvdd25-supply = <®_dldo2>;
|
|
dvdd12-supply = <®_fldo1>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
lid_switch {
|
|
label = "Lid Switch";
|
|
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
edp: edp-connector {
|
|
/* Pine64 used 3 different panels in Pinebooks:
|
|
* 14" 768p panel - boe,hb140wx1-501,
|
|
* 11" 768p panel - innolux,n116bge,
|
|
* 11" 1080p panel - neweast,wjfh116008a.
|
|
* It's not really important what compatible to use here since bridge
|
|
* driver will get modes from EDID nevertheless, so use boe compatible.
|
|
* if EDID or AUX line is broken it's up to bootloader to fix it up.
|
|
*/
|
|
compatible = "boe,hb140wx1-501", "edp-connector";
|
|
backlight = <&backlight>;
|
|
power-supply = <®_dc1sw>;
|
|
|
|
port {
|
|
edp_connector_in: endpoint {
|
|
remote-endpoint = <&anx6345_out_edp>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "c";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_vcc3v3: vcc3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
|
};
|
|
|
|
speaker_amp: audio-amplifier {
|
|
compatible = "simple-audio-amplifier";
|
|
/*
|
|
* TODO This is actually a fixed regulator controlled by
|
|
* the GPIO line on the PMIC. This should be corrected
|
|
* once GPIO support is added for this PMIC.
|
|
*/
|
|
VCC-supply = <®_ldo_io0>;
|
|
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
|
|
sound-name-prefix = "Speaker Amp";
|
|
};
|
|
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec_analog {
|
|
cpvdd-supply = <®_eldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
phys = <&usbphy 0>;
|
|
phy-names = "usb";
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
hvcc-supply = <®_dldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&i2s2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mixer0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <®_dldo4>;
|
|
vqmmc-supply = <®_eldo1>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
|
|
rtl8723cs: wifi@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_eldo1>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
mmc-hs200-1_8v;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
phys = <&usbphy 0>;
|
|
phy-names = "usb";
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_i2c {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_i2c_pins_a>;
|
|
status = "okay";
|
|
|
|
anx6345: anx6345@38 {
|
|
compatible = "analogix,anx6345";
|
|
reg = <0x38>;
|
|
reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
|
|
dvdd25-supply = <®_dldo2>;
|
|
dvdd12-supply = <®_fldo1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
anx6345_in: port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
anx6345_in_tcon0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&tcon0_out_anx6345>;
|
|
};
|
|
};
|
|
|
|
anx6345_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
anx6345_out_edp: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&edp_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp803: pmic@3a3 {
|
|
compatible = "x-powers,axp803";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
/* The ANX6345 eDP-bridge is on r_i2c */
|
|
&r_i2c {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_i2c_pl89_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
#include "axp803.dtsi"
|
|
|
|
&ac_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
®_aldo1 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "vcc-csi";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dc1sw {
|
|
regulator-name = "vcc-lcd";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-cpux";
|
|
};
|
|
|
|
/* DCDC3 is polyphased with DCDC2 */
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-hdmi";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-name = "vcc-edp";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "avdd-csi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "cpvdd";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vdd-1v8-csi";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
®_fldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_ldo_io0 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-usb";
|
|
status = "okay";
|
|
};
|
|
|
|
®_rtc_ldo {
|
|
regulator-name = "vcc-rtc";
|
|
};
|
|
|
|
&simplefb_hdmi {
|
|
vcc-hdmi-supply = <®_dldo1>;
|
|
};
|
|
|
|
&sound {
|
|
status = "okay";
|
|
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
|
|
simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
|
|
"Microphone", "Internal Microphone Right",
|
|
"Headphone", "Headphone Jack",
|
|
"Speaker", "Internal Speaker";
|
|
simple-audio-card,routing =
|
|
"Left DAC", "AIF1 Slot 0 Left",
|
|
"Right DAC", "AIF1 Slot 0 Right",
|
|
"Speaker Amp INL", "LINEOUT",
|
|
"Speaker Amp INR", "LINEOUT",
|
|
"Internal Speaker", "Speaker Amp OUTL",
|
|
"Internal Speaker", "Speaker Amp OUTR",
|
|
"Headphone Jack", "HP",
|
|
"AIF1 Slot 0 Left ADC", "Left ADC",
|
|
"AIF1 Slot 0 Right ADC", "Right ADC",
|
|
"Internal Microphone Left", "MBIAS",
|
|
"MIC1", "Internal Microphone Left",
|
|
"Internal Microphone Right", "HBIAS",
|
|
"MIC2", "Internal Microphone Right";
|
|
};
|
|
|
|
&sound_hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&tcon0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_rgb666_pins>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&tcon0_out {
|
|
tcon0_out_anx6345: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&anx6345_in_tcon0>;
|
|
};
|
|
};
|
|
|
|
&ths {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "realtek,rtl8723cs-bt";
|
|
reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
|
|
device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
|
|
host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
|
firmware-postfix = "pinebook";
|
|
};
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_vbus-supply = <®_ldo_io0>;
|
|
usb1_vbus-supply = <®_ldo_io0>;
|
|
status = "okay";
|
|
};
|