alistair23-linux/arch/arm/mach-omap2
Sakari Ailus 6890874772 [media] omap3isp: Refactor device configuration structs for Device Tree
Make omap3isp configuration data structures more suitable for consumption by
the DT by separating the I2C bus information of all the sub-devices in a
group and the ISP bus information from each other. The ISP bus information
is made a pointer instead of being directly embedded in the struct.

In the case of the DT only the sensor specific information on the ISP bus
configuration is retained. The structs are renamed to reflect that.

After this change the structs needed to describe device configuration can be
allocated and accessed separately without those needed only in the case of
platform data. The platform data related structs can be later removed once
the support for platform data can be removed.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Igor Grinberg <grinberg@compulab.co.il> (for cm-t35)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 16:41:01 -03:00
..
include/mach
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h
board-cm-t35.c [media] omap3isp: Refactor device configuration structs for Device Tree 2015-04-02 16:41:01 -03:00
board-devkit8000.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-flash.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-flash.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-generic.c ARM: SoC platform changes 2015-02-17 09:27:54 -08:00
board-ldp.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-n8x0.c ARM: SoC/OMAP GPMC driver cleanup and move for 3.19 2014-12-09 16:57:56 -08:00
board-omap3beagle.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-omap3logic.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-omap3pandora.c ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only 2015-01-19 09:56:04 +01:00
board-omap3stalker.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-omap3touchbook.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-overo.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-rx51-peripherals.c media updates for v3.19-rc1 2014-12-11 11:49:23 -08:00
board-rx51-video.c
board-rx51.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-rx51.h
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c
clkt2xxx_virt_prcm_set.c
clkt34xx_dpll3m2.c
clkt_clksel.c
clkt_dpll.c Few fixes for the v3.17 merge window: 2014-08-09 08:23:27 -07:00
clkt_iclk.c ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file 2014-07-15 14:09:24 -06:00
clock.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
clock.h The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
clock2xxx.c
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.c ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent 2014-11-13 09:26:33 -07:00
clock3xxx.h
clock34xx.c
clock34xx.h
clock36xx.c
clock36xx.h
clock44xx.h
clock2430.c
clock3517.c
clock3517.h
clock_common_data.c arm: omap2+ remove dead clock code 2015-02-02 14:23:39 -08:00
clockdomain.c
clockdomain.h ARM: OMAP2+: Add clock domain support for dm816x 2015-01-26 09:26:32 -08:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c
clockdomains7xx_data.c
clockdomains33xx_data.c
clockdomains43xx_data.c
clockdomains44xx_data.c
clockdomains54xx_data.c
clockdomains81xx_data.c ARM: OMAP2+: Add clock domain support for dm816x 2015-01-26 09:26:32 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm-regbits-7xx.h
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
cm-regbits-54xx.h
cm.h ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable 2014-10-27 08:39:24 -07:00
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx.c ARM: OMAP2: CM: remove unused PLL functions 2015-01-07 14:27:39 -08:00
cm2xxx.h ARM: OMAP2: CM: remove unused PLL functions 2015-01-07 14:27:39 -08:00
cm2xxx_3xxx.h
cm3xxx.c ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static 2014-10-27 08:39:24 -07:00
cm3xxx.h ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static 2014-10-27 08:39:24 -07:00
cm33xx.c ARM: OMAP2+: cm33xx.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
cm33xx.h ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable 2014-10-27 08:39:24 -07:00
cm44xx.h ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h 2014-10-27 08:39:25 -07:00
cm81xx.h ARM: OMAP2+: Add clock domain support for dm816x 2015-01-26 09:26:32 -08:00
cm_common.c ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable 2014-10-27 08:39:24 -07:00
cminst44xx.c ARM: OMAP4: CM: make cminst direct register access functions static 2014-10-27 08:39:25 -07:00
common-board-devices.c
common-board-devices.h arm: omap2: n8x0: move i2c devices to DT 2014-09-16 14:43:11 -07:00
common.c ARM: OMAP2+: remove DSP platform device 2014-07-15 21:01:05 -07:00
common.h ARM: SoC non-critical fixes 2015-02-17 09:15:46 -08:00
control.c ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c 2014-08-01 01:21:14 -07:00
control.h ARM: SoC non-critical fixes 2015-02-17 09:15:46 -08:00
cpuidle34xx.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
cpuidle44xx.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
ctrl_module_wkup_44xx.h
devices.c media updates for v3.19-rc1 2014-12-11 11:49:23 -08:00
devices.h
display.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
display.h
dma.c ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver 2014-07-21 23:32:51 -07:00
dpll3xxx.c clk: Add rate constraints to clocks 2015-02-02 14:23:42 -08:00
dpll44xx.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
drm.c
dss-common.c
dss-common.h
fb.c
gpio.c
gpmc-nand.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
gpmc-onenand.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
gpmc-smsc911x.c
gpmc-smsc911x.h
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
hsmmc.h mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
hwspinlock.c
i2c.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
i2c.h
id.c ARM: OMAP2+: Fix ti81xx devtype 2015-01-14 17:37:15 -08:00
id.h
io.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
iomap.h
Kconfig ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC 2015-01-20 08:49:08 -08:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
Makefile.boot
mcbsp.c
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux.h
mux34xx.c
mux34xx.h
omap-headsmp.S ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode 2015-01-05 15:48:21 -08:00
omap-hotplug.c
omap-iommu.c ARM: omap: Don't set iommu pdata da_start and da_end fields 2014-07-29 12:39:23 +02:00
omap-mpuss-lowpower.c ARM: OMAP4+: PM: Program CPU logic power state 2014-11-10 16:02:05 -08:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c
omap-secure.h ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default 2014-09-08 11:38:41 -05:00
omap-smc.S
omap-smp.c ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode 2015-01-05 15:48:21 -08:00
omap-wakeupgen.c ARM: OMAP5 / DRA7: Enable CPU RET on suspend 2014-09-08 11:38:43 -05:00
omap-wakeupgen.h ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default 2014-09-08 11:38:41 -05:00
omap2-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
omap3-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
omap4-common.c ARM: make of_device_ids const 2015-02-19 09:44:25 +01:00
omap4-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
omap4-sar-layout.h
omap24xx.h
omap34xx.h
omap44xx.h
omap54xx.h
omap_device.c ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
omap_device.h
omap_hwmod.c ARM: SoC platform changes 2015-02-17 09:27:54 -08:00
omap_hwmod.h ARM: SoC platform changes 2015-02-17 09:27:54 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c
omap_hwmod_2xxx_ipblock_data.c
omap_hwmod_3xxx_data.c ARM: OMAP3: Remove legacy support for am35xx-emac 2015-01-13 09:00:38 -08:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3 2015-01-20 18:12:17 -07:00
omap_hwmod_33xx_43xx_common_data.h
omap_hwmod_33xx_43xx_interconnect_data.c ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_33xx_data.c ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
omap_hwmod_43xx_data.c ARM: AM43xx: hwmod: set DSS submodule parent hwmods 2015-01-20 18:12:17 -07:00
omap_hwmod_44xx_data.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
omap_hwmod_81xx_data.c ARM: OMAP2+: Add dm816x hwmod support 2015-01-26 09:26:32 -08:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c
opp.c
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c
pdata-quirks.c ARM: OMAP3: Remove legacy support for am35xx-emac 2015-01-13 09:00:38 -08:00
pm-debug.c
pm.c cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' 2014-10-03 15:37:54 +02:00
pm.h ARM: OMAP5 / DRA7: Enable CPU RET on suspend 2014-09-08 11:38:43 -05:00
pm24xx.c ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
pm34xx.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
pm44xx.c ARM: OMAP4+: PM: Centralize static dependency mapping table 2014-11-10 16:01:40 -08:00
pmu.c arm: omap: specify PMUs are for ARMv7 CPUs 2015-02-06 00:13:06 -08:00
powerdomain-common.c
powerdomain.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Fix ti81xx class type 2015-01-14 17:37:16 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c
powerdomains43xx_data.c
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm-common.h ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
prcm43xx.h ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
prcm44xx.h
prcm_mpu7xx.h
prcm_mpu44xx.c
prcm_mpu44xx.h
prcm_mpu54xx.h
prcm_mpu_44xx_54xx.h
prm-regbits-24xx.h
prm-regbits-33xx.h
prm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
prm-regbits-44xx.h
prm.h ARM: OMAP3: PRM: add support for legacy iomapping init 2015-01-30 10:55:23 -08:00
prm2xxx.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm2xxx.h ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm3xxx.c ARM: make of_device_ids const 2015-02-19 09:44:25 +01:00
prm3xxx.h ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers 2015-01-07 14:27:39 -08:00
prm7xx.h arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy 2014-07-22 14:35:05 -06:00
prm33xx.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm33xx.h ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm44xx.c ARM: make of_device_ids const 2015-02-19 09:44:25 +01:00
prm44xx.h
prm44xx_54xx.h ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers 2015-01-07 14:27:39 -08:00
prm54xx.h
prm_common.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
prminst44xx.c ARM: OMAP2+: PRM: add generic API for deasserting hardware reset 2014-10-27 08:39:25 -07:00
prminst44xx.h ARM: OMAP2+: PRM: add generic API for deasserting hardware reset 2014-10-27 08:39:25 -07:00
scrm44xx.h
scrm54xx.h
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc.c
sdrc.h
sdrc2xxx.c
serial.c ARM: OMAP: serial: remove last vestige of DTR_gpio support. 2014-11-10 09:06:44 -08:00
serial.h
sleep24xx.S
sleep34xx.S
sleep44xx.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: OMAP2+: Fix ti81xx class type 2015-01-14 17:37:16 -08:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram.c ARM: OMAP4+: Remove static iotable mappings for SRAM 2014-09-18 09:47:35 -07:00
sram.h ARM: OMAP4+: Remove static iotable mappings for SRAM 2014-09-18 09:47:35 -07:00
sram34xx.S
sram242x.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
sram243x.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c ARM: SoC non-critical fixes 2015-02-17 09:15:46 -08:00
twl-common.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
twl-common.h
usb-host.c
usb-musb.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
usb-tusb6010.c ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once 2014-07-07 04:52:31 -07:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
vc.h
vc3xxx_data.c
vc44xx_data.c
voltage.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c
voltagedomains44xx_data.c
voltagedomains54xx_data.c
vp.c
vp.h
vp3xxx_data.c
vp44xx_data.c
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h