![Benoît Thébaudeau](/assets/img/avatar_default.png)
Many imx device macros have a meaningless pdata. This patch removes those. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
275 lines
6.8 KiB
C
275 lines
6.8 KiB
C
/*
|
|
* Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
|
* Boston, MA 02110-1301, USA.
|
|
*/
|
|
|
|
/*
|
|
* This machine is known as:
|
|
* - i.MX25 3-Stack Development System
|
|
* - i.MX25 Platform Development Kit (i.MX25 PDK)
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/common.h>
|
|
#include <mach/mx25.h>
|
|
#include <mach/iomux-mx25.h>
|
|
|
|
#include "devices-imx25.h"
|
|
|
|
#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static iomux_v3_cfg_t mx25pdk_pads[] = {
|
|
MX25_PAD_FEC_MDC__FEC_MDC,
|
|
MX25_PAD_FEC_MDIO__FEC_MDIO,
|
|
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
|
|
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
|
|
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
|
|
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
|
|
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
|
|
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
|
|
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
|
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
|
|
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
|
|
|
|
/* LCD */
|
|
MX25_PAD_LD0__LD0,
|
|
MX25_PAD_LD1__LD1,
|
|
MX25_PAD_LD2__LD2,
|
|
MX25_PAD_LD3__LD3,
|
|
MX25_PAD_LD4__LD4,
|
|
MX25_PAD_LD5__LD5,
|
|
MX25_PAD_LD6__LD6,
|
|
MX25_PAD_LD7__LD7,
|
|
MX25_PAD_LD8__LD8,
|
|
MX25_PAD_LD9__LD9,
|
|
MX25_PAD_LD10__LD10,
|
|
MX25_PAD_LD11__LD11,
|
|
MX25_PAD_LD12__LD12,
|
|
MX25_PAD_LD13__LD13,
|
|
MX25_PAD_LD14__LD14,
|
|
MX25_PAD_LD15__LD15,
|
|
MX25_PAD_GPIO_E__LD16,
|
|
MX25_PAD_GPIO_F__LD17,
|
|
MX25_PAD_HSYNC__HSYNC,
|
|
MX25_PAD_VSYNC__VSYNC,
|
|
MX25_PAD_LSCLK__LSCLK,
|
|
MX25_PAD_OE_ACD__OE_ACD,
|
|
MX25_PAD_CONTRAST__CONTRAST,
|
|
|
|
/* Keypad */
|
|
MX25_PAD_KPP_ROW0__KPP_ROW0,
|
|
MX25_PAD_KPP_ROW1__KPP_ROW1,
|
|
MX25_PAD_KPP_ROW2__KPP_ROW2,
|
|
MX25_PAD_KPP_ROW3__KPP_ROW3,
|
|
MX25_PAD_KPP_COL0__KPP_COL0,
|
|
MX25_PAD_KPP_COL1__KPP_COL1,
|
|
MX25_PAD_KPP_COL2__KPP_COL2,
|
|
MX25_PAD_KPP_COL3__KPP_COL3,
|
|
|
|
/* SD1 */
|
|
MX25_PAD_SD1_CMD__SD1_CMD,
|
|
MX25_PAD_SD1_CLK__SD1_CLK,
|
|
MX25_PAD_SD1_DATA0__SD1_DATA0,
|
|
MX25_PAD_SD1_DATA1__SD1_DATA1,
|
|
MX25_PAD_SD1_DATA2__SD1_DATA2,
|
|
MX25_PAD_SD1_DATA3__SD1_DATA3,
|
|
MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
|
|
MX25_PAD_A15__GPIO_2_1, /* CardDetect */
|
|
|
|
/* I2C1 */
|
|
MX25_PAD_I2C1_CLK__I2C1_CLK,
|
|
MX25_PAD_I2C1_DAT__I2C1_DAT,
|
|
|
|
/* CAN1 */
|
|
MX25_PAD_GPIO_A__CAN1_TX,
|
|
MX25_PAD_GPIO_B__CAN1_RX,
|
|
MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */
|
|
};
|
|
|
|
static const struct fec_platform_data mx25_fec_pdata __initconst = {
|
|
.phy = PHY_INTERFACE_MODE_RMII,
|
|
};
|
|
|
|
#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3)
|
|
#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8)
|
|
|
|
static void __init mx25pdk_fec_reset(void)
|
|
{
|
|
gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
|
|
gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
|
|
|
|
gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
|
|
gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
|
|
udelay(2);
|
|
|
|
/* turn on PHY power and lift reset */
|
|
gpio_set_value(FEC_ENABLE_GPIO, 1);
|
|
gpio_set_value(FEC_RESET_B_GPIO, 1);
|
|
}
|
|
|
|
static const struct mxc_nand_platform_data
|
|
mx25pdk_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
.flash_bbt = 1,
|
|
};
|
|
|
|
static struct imx_fb_videomode mx25pdk_modes[] = {
|
|
{
|
|
.mode = {
|
|
.name = "CRT-VGA",
|
|
.refresh = 60,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.pixclock = 39683,
|
|
.left_margin = 45,
|
|
.right_margin = 114,
|
|
.upper_margin = 33,
|
|
.lower_margin = 11,
|
|
.hsync_len = 1,
|
|
.vsync_len = 1,
|
|
},
|
|
.bpp = 16,
|
|
.pcr = 0xFA208B80,
|
|
},
|
|
};
|
|
|
|
static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
|
|
.mode = mx25pdk_modes,
|
|
.num_modes = ARRAY_SIZE(mx25pdk_modes),
|
|
.pwmr = 0x00A903FF,
|
|
.lscr1 = 0x00120300,
|
|
.dmacr = 0x00020010,
|
|
};
|
|
|
|
static const uint32_t mx25pdk_keymap[] = {
|
|
KEY(0, 0, KEY_UP),
|
|
KEY(0, 1, KEY_DOWN),
|
|
KEY(0, 2, KEY_VOLUMEDOWN),
|
|
KEY(0, 3, KEY_HOME),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(1, 1, KEY_LEFT),
|
|
KEY(1, 2, KEY_ENTER),
|
|
KEY(1, 3, KEY_VOLUMEUP),
|
|
KEY(2, 0, KEY_F6),
|
|
KEY(2, 1, KEY_F8),
|
|
KEY(2, 2, KEY_F9),
|
|
KEY(2, 3, KEY_F10),
|
|
KEY(3, 0, KEY_F1),
|
|
KEY(3, 1, KEY_F2),
|
|
KEY(3, 2, KEY_F3),
|
|
KEY(3, 3, KEY_POWER),
|
|
};
|
|
|
|
static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
|
|
.keymap = mx25pdk_keymap,
|
|
.keymap_size = ARRAY_SIZE(mx25pdk_keymap),
|
|
};
|
|
|
|
static int mx25pdk_usbh2_init(struct platform_device *pdev)
|
|
{
|
|
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
|
|
}
|
|
|
|
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
|
|
.init = mx25pdk_usbh2_init,
|
|
.portsc = MXC_EHCI_MODE_SERIAL,
|
|
};
|
|
|
|
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_UTMI,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
#define SD1_GPIO_WP IMX_GPIO_NR(2, 0)
|
|
#define SD1_GPIO_CD IMX_GPIO_NR(2, 1)
|
|
|
|
static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
|
|
.wp_gpio = SD1_GPIO_WP,
|
|
.cd_gpio = SD1_GPIO_CD,
|
|
.wp_type = ESDHC_WP_GPIO,
|
|
.cd_type = ESDHC_CD_GPIO,
|
|
};
|
|
|
|
static void __init mx25pdk_init(void)
|
|
{
|
|
imx25_soc_init();
|
|
|
|
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
|
|
ARRAY_SIZE(mx25pdk_pads));
|
|
|
|
imx25_add_imx_uart0(&uart_pdata);
|
|
imx25_add_fsl_usb2_udc(&otg_device_pdata);
|
|
imx25_add_mxc_ehci_hs(&usbh2_pdata);
|
|
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
|
|
imx25_add_imxdi_rtc();
|
|
imx25_add_imx_fb(&mx25pdk_fb_pdata);
|
|
imx25_add_imx2_wdt();
|
|
|
|
mx25pdk_fec_reset();
|
|
imx25_add_fec(&mx25_fec_pdata);
|
|
imx25_add_imx_keypad(&mx25pdk_keymap_data);
|
|
|
|
imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
|
|
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
|
|
|
|
gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
|
|
imx25_add_flexcan0(NULL);
|
|
}
|
|
|
|
static void __init mx25pdk_timer_init(void)
|
|
{
|
|
mx25_clocks_init();
|
|
}
|
|
|
|
static struct sys_timer mx25pdk_timer = {
|
|
.init = mx25pdk_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
|
|
/* Maintainer: Freescale Semiconductor, Inc. */
|
|
.atag_offset = 0x100,
|
|
.map_io = mx25_map_io,
|
|
.init_early = imx25_init_early,
|
|
.init_irq = mx25_init_irq,
|
|
.handle_irq = imx25_handle_irq,
|
|
.timer = &mx25pdk_timer,
|
|
.init_machine = mx25pdk_init,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|