![Srikar Dronamraju](/assets/img/avatar_default.png)
Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
675 lines
21 KiB
C
675 lines
21 KiB
C
/*
|
|
* User-space Probes (UProbes) for x86
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
* Copyright (C) IBM Corporation, 2008-2011
|
|
* Authors:
|
|
* Srikar Dronamraju
|
|
* Jim Keniston
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/uprobes.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/kdebug.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/insn.h>
|
|
|
|
/* Post-execution fixups. */
|
|
|
|
/* No fixup needed */
|
|
#define UPROBE_FIX_NONE 0x0
|
|
|
|
/* Adjust IP back to vicinity of actual insn */
|
|
#define UPROBE_FIX_IP 0x1
|
|
|
|
/* Adjust the return address of a call insn */
|
|
#define UPROBE_FIX_CALL 0x2
|
|
|
|
#define UPROBE_FIX_RIP_AX 0x8000
|
|
#define UPROBE_FIX_RIP_CX 0x4000
|
|
|
|
#define UPROBE_TRAP_NR UINT_MAX
|
|
|
|
/* Adaptations for mhiramat x86 decoder v14. */
|
|
#define OPCODE1(insn) ((insn)->opcode.bytes[0])
|
|
#define OPCODE2(insn) ((insn)->opcode.bytes[1])
|
|
#define OPCODE3(insn) ((insn)->opcode.bytes[2])
|
|
#define MODRM_REG(insn) X86_MODRM_REG(insn->modrm.value)
|
|
|
|
#define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
|
|
(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \
|
|
(b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \
|
|
(b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \
|
|
(bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \
|
|
<< (row % 32))
|
|
|
|
/*
|
|
* Good-instruction tables for 32-bit apps. This is non-const and volatile
|
|
* to keep gcc from statically optimizing it out, as variable_test_bit makes
|
|
* some versions of gcc to think only *(unsigned long*) is used.
|
|
*/
|
|
static volatile u32 good_insns_32[256 / 32] = {
|
|
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
|
|
/* ---------------------------------------------- */
|
|
W(0x00, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) | /* 00 */
|
|
W(0x10, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 10 */
|
|
W(0x20, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) | /* 20 */
|
|
W(0x30, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) , /* 30 */
|
|
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
|
|
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
|
|
W(0x60, 1, 1, 1, 0, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
|
|
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
|
|
W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
|
|
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
|
|
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
|
|
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
|
|
W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
|
|
W(0xd0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
|
|
W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
|
|
W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
|
|
/* ---------------------------------------------- */
|
|
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
|
|
};
|
|
|
|
/* Using this for both 64-bit and 32-bit apps */
|
|
static volatile u32 good_2byte_insns[256 / 32] = {
|
|
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
|
|
/* ---------------------------------------------- */
|
|
W(0x00, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1) | /* 00 */
|
|
W(0x10, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1) , /* 10 */
|
|
W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 20 */
|
|
W(0x30, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 30 */
|
|
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
|
|
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
|
|
W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 60 */
|
|
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1) , /* 70 */
|
|
W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
|
|
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
|
|
W(0xa0, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1) | /* a0 */
|
|
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
|
|
W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
|
|
W(0xd0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
|
|
W(0xe0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* e0 */
|
|
W(0xf0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0) /* f0 */
|
|
/* ---------------------------------------------- */
|
|
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
|
|
};
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/* Good-instruction tables for 64-bit apps */
|
|
static volatile u32 good_insns_64[256 / 32] = {
|
|
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
|
|
/* ---------------------------------------------- */
|
|
W(0x00, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 00 */
|
|
W(0x10, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 10 */
|
|
W(0x20, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 20 */
|
|
W(0x30, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 30 */
|
|
W(0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 40 */
|
|
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
|
|
W(0x60, 0, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
|
|
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
|
|
W(0x80, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
|
|
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
|
|
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
|
|
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
|
|
W(0xc0, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
|
|
W(0xd0, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
|
|
W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
|
|
W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
|
|
/* ---------------------------------------------- */
|
|
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
|
|
};
|
|
#endif
|
|
#undef W
|
|
|
|
/*
|
|
* opcodes we'll probably never support:
|
|
*
|
|
* 6c-6d, e4-e5, ec-ed - in
|
|
* 6e-6f, e6-e7, ee-ef - out
|
|
* cc, cd - int3, int
|
|
* cf - iret
|
|
* d6 - illegal instruction
|
|
* f1 - int1/icebp
|
|
* f4 - hlt
|
|
* fa, fb - cli, sti
|
|
* 0f - lar, lsl, syscall, clts, sysret, sysenter, sysexit, invd, wbinvd, ud2
|
|
*
|
|
* invalid opcodes in 64-bit mode:
|
|
*
|
|
* 06, 0e, 16, 1e, 27, 2f, 37, 3f, 60-62, 82, c4-c5, d4-d5
|
|
* 63 - we support this opcode in x86_64 but not in i386.
|
|
*
|
|
* opcodes we may need to refine support for:
|
|
*
|
|
* 0f - 2-byte instructions: For many of these instructions, the validity
|
|
* depends on the prefix and/or the reg field. On such instructions, we
|
|
* just consider the opcode combination valid if it corresponds to any
|
|
* valid instruction.
|
|
*
|
|
* 8f - Group 1 - only reg = 0 is OK
|
|
* c6-c7 - Group 11 - only reg = 0 is OK
|
|
* d9-df - fpu insns with some illegal encodings
|
|
* f2, f3 - repnz, repz prefixes. These are also the first byte for
|
|
* certain floating-point instructions, such as addsd.
|
|
*
|
|
* fe - Group 4 - only reg = 0 or 1 is OK
|
|
* ff - Group 5 - only reg = 0-6 is OK
|
|
*
|
|
* others -- Do we need to support these?
|
|
*
|
|
* 0f - (floating-point?) prefetch instructions
|
|
* 07, 17, 1f - pop es, pop ss, pop ds
|
|
* 26, 2e, 36, 3e - es:, cs:, ss:, ds: segment prefixes --
|
|
* but 64 and 65 (fs: and gs:) seem to be used, so we support them
|
|
* 67 - addr16 prefix
|
|
* ce - into
|
|
* f0 - lock prefix
|
|
*/
|
|
|
|
/*
|
|
* TODO:
|
|
* - Where necessary, examine the modrm byte and allow only valid instructions
|
|
* in the different Groups and fpu instructions.
|
|
*/
|
|
|
|
static bool is_prefix_bad(struct insn *insn)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < insn->prefixes.nbytes; i++) {
|
|
switch (insn->prefixes.bytes[i]) {
|
|
case 0x26: /* INAT_PFX_ES */
|
|
case 0x2E: /* INAT_PFX_CS */
|
|
case 0x36: /* INAT_PFX_DS */
|
|
case 0x3E: /* INAT_PFX_SS */
|
|
case 0xF0: /* INAT_PFX_LOCK */
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int validate_insn_32bits(struct arch_uprobe *auprobe, struct insn *insn)
|
|
{
|
|
insn_init(insn, auprobe->insn, false);
|
|
|
|
/* Skip good instruction prefixes; reject "bad" ones. */
|
|
insn_get_opcode(insn);
|
|
if (is_prefix_bad(insn))
|
|
return -ENOTSUPP;
|
|
|
|
if (test_bit(OPCODE1(insn), (unsigned long *)good_insns_32))
|
|
return 0;
|
|
|
|
if (insn->opcode.nbytes == 2) {
|
|
if (test_bit(OPCODE2(insn), (unsigned long *)good_2byte_insns))
|
|
return 0;
|
|
}
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* Figure out which fixups arch_uprobe_post_xol() will need to perform, and
|
|
* annotate arch_uprobe->fixups accordingly. To start with,
|
|
* arch_uprobe->fixups is either zero or it reflects rip-related fixups.
|
|
*/
|
|
static void prepare_fixups(struct arch_uprobe *auprobe, struct insn *insn)
|
|
{
|
|
bool fix_ip = true, fix_call = false; /* defaults */
|
|
int reg;
|
|
|
|
insn_get_opcode(insn); /* should be a nop */
|
|
|
|
switch (OPCODE1(insn)) {
|
|
case 0xc3: /* ret/lret */
|
|
case 0xcb:
|
|
case 0xc2:
|
|
case 0xca:
|
|
/* ip is correct */
|
|
fix_ip = false;
|
|
break;
|
|
case 0xe8: /* call relative - Fix return addr */
|
|
fix_call = true;
|
|
break;
|
|
case 0x9a: /* call absolute - Fix return addr, not ip */
|
|
fix_call = true;
|
|
fix_ip = false;
|
|
break;
|
|
case 0xff:
|
|
insn_get_modrm(insn);
|
|
reg = MODRM_REG(insn);
|
|
if (reg == 2 || reg == 3) {
|
|
/* call or lcall, indirect */
|
|
/* Fix return addr; ip is correct. */
|
|
fix_call = true;
|
|
fix_ip = false;
|
|
} else if (reg == 4 || reg == 5) {
|
|
/* jmp or ljmp, indirect */
|
|
/* ip is correct. */
|
|
fix_ip = false;
|
|
}
|
|
break;
|
|
case 0xea: /* jmp absolute -- ip is correct */
|
|
fix_ip = false;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (fix_ip)
|
|
auprobe->fixups |= UPROBE_FIX_IP;
|
|
if (fix_call)
|
|
auprobe->fixups |= UPROBE_FIX_CALL;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/*
|
|
* If arch_uprobe->insn doesn't use rip-relative addressing, return
|
|
* immediately. Otherwise, rewrite the instruction so that it accesses
|
|
* its memory operand indirectly through a scratch register. Set
|
|
* arch_uprobe->fixups and arch_uprobe->rip_rela_target_address
|
|
* accordingly. (The contents of the scratch register will be saved
|
|
* before we single-step the modified instruction, and restored
|
|
* afterward.)
|
|
*
|
|
* We do this because a rip-relative instruction can access only a
|
|
* relatively small area (+/- 2 GB from the instruction), and the XOL
|
|
* area typically lies beyond that area. At least for instructions
|
|
* that store to memory, we can't execute the original instruction
|
|
* and "fix things up" later, because the misdirected store could be
|
|
* disastrous.
|
|
*
|
|
* Some useful facts about rip-relative instructions:
|
|
*
|
|
* - There's always a modrm byte.
|
|
* - There's never a SIB byte.
|
|
* - The displacement is always 4 bytes.
|
|
*/
|
|
static void
|
|
handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
|
|
{
|
|
u8 *cursor;
|
|
u8 reg;
|
|
|
|
if (mm->context.ia32_compat)
|
|
return;
|
|
|
|
auprobe->rip_rela_target_address = 0x0;
|
|
if (!insn_rip_relative(insn))
|
|
return;
|
|
|
|
/*
|
|
* insn_rip_relative() would have decoded rex_prefix, modrm.
|
|
* Clear REX.b bit (extension of MODRM.rm field):
|
|
* we want to encode rax/rcx, not r8/r9.
|
|
*/
|
|
if (insn->rex_prefix.nbytes) {
|
|
cursor = auprobe->insn + insn_offset_rex_prefix(insn);
|
|
*cursor &= 0xfe; /* Clearing REX.B bit */
|
|
}
|
|
|
|
/*
|
|
* Point cursor at the modrm byte. The next 4 bytes are the
|
|
* displacement. Beyond the displacement, for some instructions,
|
|
* is the immediate operand.
|
|
*/
|
|
cursor = auprobe->insn + insn_offset_modrm(insn);
|
|
insn_get_length(insn);
|
|
|
|
/*
|
|
* Convert from rip-relative addressing to indirect addressing
|
|
* via a scratch register. Change the r/m field from 0x5 (%rip)
|
|
* to 0x0 (%rax) or 0x1 (%rcx), and squeeze out the offset field.
|
|
*/
|
|
reg = MODRM_REG(insn);
|
|
if (reg == 0) {
|
|
/*
|
|
* The register operand (if any) is either the A register
|
|
* (%rax, %eax, etc.) or (if the 0x4 bit is set in the
|
|
* REX prefix) %r8. In any case, we know the C register
|
|
* is NOT the register operand, so we use %rcx (register
|
|
* #1) for the scratch register.
|
|
*/
|
|
auprobe->fixups = UPROBE_FIX_RIP_CX;
|
|
/* Change modrm from 00 000 101 to 00 000 001. */
|
|
*cursor = 0x1;
|
|
} else {
|
|
/* Use %rax (register #0) for the scratch register. */
|
|
auprobe->fixups = UPROBE_FIX_RIP_AX;
|
|
/* Change modrm from 00 xxx 101 to 00 xxx 000 */
|
|
*cursor = (reg << 3);
|
|
}
|
|
|
|
/* Target address = address of next instruction + (signed) offset */
|
|
auprobe->rip_rela_target_address = (long)insn->length + insn->displacement.value;
|
|
|
|
/* Displacement field is gone; slide immediate field (if any) over. */
|
|
if (insn->immediate.nbytes) {
|
|
cursor++;
|
|
memmove(cursor, cursor + insn->displacement.nbytes, insn->immediate.nbytes);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static int validate_insn_64bits(struct arch_uprobe *auprobe, struct insn *insn)
|
|
{
|
|
insn_init(insn, auprobe->insn, true);
|
|
|
|
/* Skip good instruction prefixes; reject "bad" ones. */
|
|
insn_get_opcode(insn);
|
|
if (is_prefix_bad(insn))
|
|
return -ENOTSUPP;
|
|
|
|
if (test_bit(OPCODE1(insn), (unsigned long *)good_insns_64))
|
|
return 0;
|
|
|
|
if (insn->opcode.nbytes == 2) {
|
|
if (test_bit(OPCODE2(insn), (unsigned long *)good_2byte_insns))
|
|
return 0;
|
|
}
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
|
|
{
|
|
if (mm->context.ia32_compat)
|
|
return validate_insn_32bits(auprobe, insn);
|
|
return validate_insn_64bits(auprobe, insn);
|
|
}
|
|
#else /* 32-bit: */
|
|
static void handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
|
|
{
|
|
/* No RIP-relative addressing on 32-bit */
|
|
}
|
|
|
|
static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
|
|
{
|
|
return validate_insn_32bits(auprobe, insn);
|
|
}
|
|
#endif /* CONFIG_X86_64 */
|
|
|
|
/**
|
|
* arch_uprobe_analyze_insn - instruction analysis including validity and fixups.
|
|
* @mm: the probed address space.
|
|
* @arch_uprobe: the probepoint information.
|
|
* Return 0 on success or a -ve number on error.
|
|
*/
|
|
int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm)
|
|
{
|
|
int ret;
|
|
struct insn insn;
|
|
|
|
auprobe->fixups = 0;
|
|
ret = validate_insn_bits(auprobe, mm, &insn);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
handle_riprel_insn(auprobe, mm, &insn);
|
|
prepare_fixups(auprobe, &insn);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/*
|
|
* If we're emulating a rip-relative instruction, save the contents
|
|
* of the scratch register and store the target address in that register.
|
|
*/
|
|
static void
|
|
pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs,
|
|
struct arch_uprobe_task *autask)
|
|
{
|
|
if (auprobe->fixups & UPROBE_FIX_RIP_AX) {
|
|
autask->saved_scratch_register = regs->ax;
|
|
regs->ax = current->utask->vaddr;
|
|
regs->ax += auprobe->rip_rela_target_address;
|
|
} else if (auprobe->fixups & UPROBE_FIX_RIP_CX) {
|
|
autask->saved_scratch_register = regs->cx;
|
|
regs->cx = current->utask->vaddr;
|
|
regs->cx += auprobe->rip_rela_target_address;
|
|
}
|
|
}
|
|
#else
|
|
static void
|
|
pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs,
|
|
struct arch_uprobe_task *autask)
|
|
{
|
|
/* No RIP-relative addressing on 32-bit */
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* arch_uprobe_pre_xol - prepare to execute out of line.
|
|
* @auprobe: the probepoint information.
|
|
* @regs: reflects the saved user state of current task.
|
|
*/
|
|
int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
|
{
|
|
struct arch_uprobe_task *autask;
|
|
|
|
autask = ¤t->utask->autask;
|
|
autask->saved_trap_nr = current->thread.trap_nr;
|
|
current->thread.trap_nr = UPROBE_TRAP_NR;
|
|
regs->ip = current->utask->xol_vaddr;
|
|
pre_xol_rip_insn(auprobe, regs, autask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is called by arch_uprobe_post_xol() to adjust the return
|
|
* address pushed by a call instruction executed out of line.
|
|
*/
|
|
static int adjust_ret_addr(unsigned long sp, long correction)
|
|
{
|
|
int rasize, ncopied;
|
|
long ra = 0;
|
|
|
|
if (is_ia32_task())
|
|
rasize = 4;
|
|
else
|
|
rasize = 8;
|
|
|
|
ncopied = copy_from_user(&ra, (void __user *)sp, rasize);
|
|
if (unlikely(ncopied))
|
|
return -EFAULT;
|
|
|
|
ra += correction;
|
|
ncopied = copy_to_user((void __user *)sp, &ra, rasize);
|
|
if (unlikely(ncopied))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
static bool is_riprel_insn(struct arch_uprobe *auprobe)
|
|
{
|
|
return ((auprobe->fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) != 0);
|
|
}
|
|
|
|
static void
|
|
handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction)
|
|
{
|
|
if (is_riprel_insn(auprobe)) {
|
|
struct arch_uprobe_task *autask;
|
|
|
|
autask = ¤t->utask->autask;
|
|
if (auprobe->fixups & UPROBE_FIX_RIP_AX)
|
|
regs->ax = autask->saved_scratch_register;
|
|
else
|
|
regs->cx = autask->saved_scratch_register;
|
|
|
|
/*
|
|
* The original instruction includes a displacement, and so
|
|
* is 4 bytes longer than what we've just single-stepped.
|
|
* Fall through to handle stuff like "jmpq *...(%rip)" and
|
|
* "callq *...(%rip)".
|
|
*/
|
|
if (correction)
|
|
*correction += 4;
|
|
}
|
|
}
|
|
#else
|
|
static void
|
|
handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction)
|
|
{
|
|
/* No RIP-relative addressing on 32-bit */
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* If xol insn itself traps and generates a signal(Say,
|
|
* SIGILL/SIGSEGV/etc), then detect the case where a singlestepped
|
|
* instruction jumps back to its own address. It is assumed that anything
|
|
* like do_page_fault/do_trap/etc sets thread.trap_nr != -1.
|
|
*
|
|
* arch_uprobe_pre_xol/arch_uprobe_post_xol save/restore thread.trap_nr,
|
|
* arch_uprobe_xol_was_trapped() simply checks that ->trap_nr is not equal to
|
|
* UPROBE_TRAP_NR == -1 set by arch_uprobe_pre_xol().
|
|
*/
|
|
bool arch_uprobe_xol_was_trapped(struct task_struct *t)
|
|
{
|
|
if (t->thread.trap_nr != UPROBE_TRAP_NR)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Called after single-stepping. To avoid the SMP problems that can
|
|
* occur when we temporarily put back the original opcode to
|
|
* single-step, we single-stepped a copy of the instruction.
|
|
*
|
|
* This function prepares to resume execution after the single-step.
|
|
* We have to fix things up as follows:
|
|
*
|
|
* Typically, the new ip is relative to the copied instruction. We need
|
|
* to make it relative to the original instruction (FIX_IP). Exceptions
|
|
* are return instructions and absolute or indirect jump or call instructions.
|
|
*
|
|
* If the single-stepped instruction was a call, the return address that
|
|
* is atop the stack is the address following the copied instruction. We
|
|
* need to make it the address following the original instruction (FIX_CALL).
|
|
*
|
|
* If the original instruction was a rip-relative instruction such as
|
|
* "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
|
|
* instruction using a scratch register -- e.g., "movl %edx,(%rax)".
|
|
* We need to restore the contents of the scratch register and adjust
|
|
* the ip, keeping in mind that the instruction we executed is 4 bytes
|
|
* shorter than the original instruction (since we squeezed out the offset
|
|
* field). (FIX_RIP_AX or FIX_RIP_CX)
|
|
*/
|
|
int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
|
{
|
|
struct uprobe_task *utask;
|
|
long correction;
|
|
int result = 0;
|
|
|
|
WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR);
|
|
|
|
utask = current->utask;
|
|
current->thread.trap_nr = utask->autask.saved_trap_nr;
|
|
correction = (long)(utask->vaddr - utask->xol_vaddr);
|
|
handle_riprel_post_xol(auprobe, regs, &correction);
|
|
if (auprobe->fixups & UPROBE_FIX_IP)
|
|
regs->ip += correction;
|
|
|
|
if (auprobe->fixups & UPROBE_FIX_CALL)
|
|
result = adjust_ret_addr(regs->sp, correction);
|
|
|
|
return result;
|
|
}
|
|
|
|
/* callback routine for handling exceptions. */
|
|
int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data)
|
|
{
|
|
struct die_args *args = data;
|
|
struct pt_regs *regs = args->regs;
|
|
int ret = NOTIFY_DONE;
|
|
|
|
/* We are only interested in userspace traps */
|
|
if (regs && !user_mode_vm(regs))
|
|
return NOTIFY_DONE;
|
|
|
|
switch (val) {
|
|
case DIE_INT3:
|
|
if (uprobe_pre_sstep_notifier(regs))
|
|
ret = NOTIFY_STOP;
|
|
|
|
break;
|
|
|
|
case DIE_DEBUG:
|
|
if (uprobe_post_sstep_notifier(regs))
|
|
ret = NOTIFY_STOP;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function gets called when XOL instruction either gets trapped or
|
|
* the thread has a fatal signal, so reset the instruction pointer to its
|
|
* probed address.
|
|
*/
|
|
void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
|
{
|
|
struct uprobe_task *utask = current->utask;
|
|
|
|
current->thread.trap_nr = utask->autask.saved_trap_nr;
|
|
handle_riprel_post_xol(auprobe, regs, NULL);
|
|
instruction_pointer_set(regs, utask->vaddr);
|
|
}
|
|
|
|
/*
|
|
* Skip these instructions as per the currently known x86 ISA.
|
|
* 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 }
|
|
*/
|
|
bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_UINSN_BYTES; i++) {
|
|
if ((auprobe->insn[i] == 0x66))
|
|
continue;
|
|
|
|
if (auprobe->insn[i] == 0x90)
|
|
return true;
|
|
|
|
if (i == (MAX_UINSN_BYTES - 1))
|
|
break;
|
|
|
|
if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x1f))
|
|
return true;
|
|
|
|
if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x19))
|
|
return true;
|
|
|
|
if ((auprobe->insn[i] == 0x87) && (auprobe->insn[i+1] == 0xc0))
|
|
return true;
|
|
|
|
break;
|
|
}
|
|
return false;
|
|
}
|