alistair23-linux/drivers/ata/pata_rb532_cf.c
Phil Sutter 6be976e79d pata-rb532-cf: drop custom freeze and thaw
I'm not quite sure what freezing and thawing is used for. Tests showed
that the port is being frozen at initialisation state and thawed right
afterwards, then the functions were not called anymore. Dropping the
complete custom code for handling the frozen state seems to work at
least for a standard use case including mounting a partition, copying
some files in it (in parallel) and finally removing them and unmounting
the partition.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-24 22:02:40 -04:00

227 lines
5.5 KiB
C

/*
* A low-level PATA driver to handle a Compact Flash connected on the
* Mikrotik's RouterBoard 532 board.
*
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
* Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
*
* This file was based on: drivers/ata/pata_ixp4xx_cf.c
* Copyright (C) 2006-07 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* Also was based on the driver for Linux 2.4.xx published by Mikrotik for
* their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
* seems not to have a license.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/libata.h>
#include <scsi/scsi_host.h>
#include <asm/gpio.h>
#define DRV_NAME "pata-rb532-cf"
#define DRV_VERSION "0.1.0"
#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
#define RB500_CF_REG_BASE 0x0800
#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
/* 32bit buffered data register offset */
#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
unsigned int gpio_line;
unsigned int irq;
};
/* ------------------------------------------------------------------------ */
static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
{
struct ata_host *ah = dev_instance;
struct rb532_cf_info *info = ah->private_data;
if (gpio_get_value(info->gpio_line)) {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
ata_sff_interrupt(info->irq, dev_instance);
} else {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
return IRQ_HANDLED;
}
static struct ata_port_operations rb532_pata_port_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
};
/* ------------------------------------------------------------------------ */
static struct scsi_host_template rb532_pata_sht = {
ATA_PIO_SHT(DRV_NAME),
};
/* ------------------------------------------------------------------------ */
static void rb532_pata_setup_ports(struct ata_host *ah)
{
struct rb532_cf_info *info = ah->private_data;
struct ata_port *ap;
ap = ah->ports[0];
ap->ops = &rb532_pata_port_ops;
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
{
unsigned int irq;
int gpio;
struct resource *res;
struct ata_host *ah;
struct rb532_cf_info *info;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no IOMEM resource found\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev, "no IRQ resource found\n");
return -ENOENT;
}
gpio = irq_to_gpio(irq);
if (gpio < 0) {
dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
return -ENOENT;
}
ret = gpio_request(gpio, DRV_NAME);
if (ret) {
dev_err(&pdev->dev, "GPIO request failed\n");
return ret;
}
/* allocate host */
ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS);
if (!ah)
return -ENOMEM;
platform_set_drvdata(pdev, ah);
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
ah->private_data = info;
info->gpio_line = gpio;
info->irq = irq;
info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
res->end - res->start + 1);
if (!info->iobase)
return -ENOMEM;
ret = gpio_direction_input(gpio);
if (ret) {
dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
ret);
goto err_free_gpio;
}
rb532_pata_setup_ports(ah);
ret = ata_host_activate(ah, irq, rb532_pata_irq_handler,
IRQF_TRIGGER_LOW, &rb532_pata_sht);
if (ret)
goto err_free_gpio;
return 0;
err_free_gpio:
gpio_free(gpio);
return ret;
}
static __devexit int rb532_pata_driver_remove(struct platform_device *pdev)
{
struct ata_host *ah = platform_get_drvdata(pdev);
struct rb532_cf_info *info = ah->private_data;
ata_host_detach(ah);
gpio_free(info->gpio_line);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:" DRV_NAME);
static struct platform_driver rb532_pata_platform_driver = {
.probe = rb532_pata_driver_probe,
.remove = __devexit_p(rb532_pata_driver_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
/* ------------------------------------------------------------------------ */
#define DRV_INFO DRV_DESC " version " DRV_VERSION
static int __init rb532_pata_module_init(void)
{
printk(KERN_INFO DRV_INFO "\n");
return platform_driver_register(&rb532_pata_platform_driver);
}
static void __exit rb532_pata_module_exit(void)
{
platform_driver_unregister(&rb532_pata_platform_driver);
}
MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION(DRV_DESC);
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
module_init(rb532_pata_module_init);
module_exit(rb532_pata_module_exit);