1
0
Fork 0
alistair23-linux/Documentation/devicetree/bindings/reset/nxp,dispmix-mipi-rst.txt

58 lines
1.9 KiB
Plaintext

NXP Display Mix mipi-rst Reset Controller
=========================================
This binding describes a reset controller device that is used to reset
or de-reset the MIPI DPHY master direction(for MIPI DSI) and slave
direction(for MIPI CSI) included by the Display Mix subsystem on IMX8MM
and IMX8MN platforms. Like sft-rstn, only assert and deassert functions
are required for PHY reset or de-reset.
Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "fsl,imx8mm-dispmix-mipi-rst" or
"fsl,imx8mn-dispmix-mipi-rst".
- reg: should be register base and length as documented in the datasheet.
- clocks: phandle and clock specifier to disp apb clock for register access.
- clock-names: should be "disp-apb".
- power-domains: phandle to dispmix power domain.
- reset-cells: 1, see below.
example:
dispmix_mipi_rst: dispmix-mipi-rst@32e28008 {
compatible = "fsl,imx8mn-dispmix-mipi-rst";
reg = <0x0 0x32e28008 0x0 0x4>;
clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>;
clock-names = "disp-apb";
active_low;
power-domains = <&dispmix_pd>;
#reset-cells = <1>;
};
Specifying mipi-rst control of devices
======================================
Device nodes in Display Mix should specify the reset channel required in
their "resets" property, containing a phandle to the mipi-rst device node
and an index to specify which channel to use, as described in
Documentation/devicetree/bindings/reset/reset.txt.
example:
mipi_dsi_resets: mipi-dsi-resets {
#address-cells = <1>;
#size-cells = <0>;
#reset-cells = <0>;
dsi-mipi-reset {
compatible = "dsi,mipi-reset";
resets = <&dispmix_mipi_rst IMX8MN_MIPI_M_RESET>;
};
};
Macro definitions for the supported reset channels can be found in:
include/dt-bindings/reset/imx8mm-dispmix.h and
include/dt-bindings/reset/imx8mn-dispmix.h.