![Hans Verkuil](/assets/img/avatar_default.png)
If no signal is detected, return V4L2_STD_UNKNOWN. Otherwise AND the standard with the detected standards. Note that the v4l2 core initializes the std with tvnorms before calling the querystd ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
651 lines
17 KiB
C
651 lines
17 KiB
C
/*
|
|
* adv7183.c Analog Devices ADV7183 video decoder driver
|
|
*
|
|
* Copyright (c) 2011 Analog Devices Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/videodev2.h>
|
|
|
|
#include <media/adv7183.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
|
|
#include "adv7183_regs.h"
|
|
|
|
struct adv7183 {
|
|
struct v4l2_subdev sd;
|
|
struct v4l2_ctrl_handler hdl;
|
|
|
|
v4l2_std_id std; /* Current set standard */
|
|
u32 input;
|
|
u32 output;
|
|
unsigned reset_pin;
|
|
unsigned oe_pin;
|
|
struct v4l2_mbus_framefmt fmt;
|
|
};
|
|
|
|
/* EXAMPLES USING 27 MHz CLOCK
|
|
* Mode 1 CVBS Input (Composite Video on AIN5)
|
|
* All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8.
|
|
*/
|
|
static const unsigned char adv7183_init_regs[] = {
|
|
ADV7183_IN_CTRL, 0x04, /* CVBS input on AIN5 */
|
|
ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */
|
|
ADV7183_SHAP_FILT_CTRL, 0x41, /* Set CSFM to SH1 */
|
|
ADV7183_ADC_CTRL, 0x16, /* Power down ADC 1 and ADC 2 */
|
|
ADV7183_CTI_DNR_CTRL_4, 0x04, /* Set DNR threshold to 4 for flat response */
|
|
/* ADI recommended programming sequence */
|
|
ADV7183_ADI_CTRL, 0x80,
|
|
ADV7183_CTI_DNR_CTRL_4, 0x20,
|
|
0x52, 0x18,
|
|
0x58, 0xED,
|
|
0x77, 0xC5,
|
|
0x7C, 0x93,
|
|
0x7D, 0x00,
|
|
0xD0, 0x48,
|
|
0xD5, 0xA0,
|
|
0xD7, 0xEA,
|
|
ADV7183_SD_SATURATION_CR, 0x3E,
|
|
ADV7183_PAL_V_END, 0x3E,
|
|
ADV7183_PAL_F_TOGGLE, 0x0F,
|
|
ADV7183_ADI_CTRL, 0x00,
|
|
};
|
|
|
|
static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct adv7183, sd);
|
|
}
|
|
static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return &container_of(ctrl->handler, struct adv7183, hdl)->sd;
|
|
}
|
|
|
|
static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg,
|
|
unsigned char value)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
static int adv7183_writeregs(struct v4l2_subdev *sd,
|
|
const unsigned char *regs, unsigned int num)
|
|
{
|
|
unsigned char reg, data;
|
|
unsigned int cnt = 0;
|
|
|
|
if (num & 0x1) {
|
|
v4l2_err(sd, "invalid regs array\n");
|
|
return -1;
|
|
}
|
|
|
|
while (cnt < num) {
|
|
reg = *regs++;
|
|
data = *regs++;
|
|
cnt += 2;
|
|
|
|
adv7183_write(sd, reg, data);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
|
|
v4l2_info(sd, "adv7183: Input control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_IN_CTRL));
|
|
v4l2_info(sd, "adv7183: Video selection = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_VD_SEL));
|
|
v4l2_info(sd, "adv7183: Output control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_OUT_CTRL));
|
|
v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_EXT_OUT_CTRL));
|
|
v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_AUTO_DET_EN));
|
|
v4l2_info(sd, "adv7183: Contrast = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_CONTRAST));
|
|
v4l2_info(sd, "adv7183: Brightness = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_BRIGHTNESS));
|
|
v4l2_info(sd, "adv7183: Hue = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_HUE));
|
|
v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_DEF_Y));
|
|
v4l2_info(sd, "adv7183: Default value C = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_DEF_C));
|
|
v4l2_info(sd, "adv7183: ADI control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_ADI_CTRL));
|
|
v4l2_info(sd, "adv7183: Power Management = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_POW_MANAGE));
|
|
v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_STATUS_1),
|
|
adv7183_read(sd, ADV7183_STATUS_2),
|
|
adv7183_read(sd, ADV7183_STATUS_3));
|
|
v4l2_info(sd, "adv7183: Ident = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_IDENT));
|
|
v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL));
|
|
v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1));
|
|
v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_SHAP_FILT_CTRL),
|
|
adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2));
|
|
v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_COMB_FILT_CTRL));
|
|
v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_ADI_CTRL_2));
|
|
v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_PIX_DELAY_CTRL));
|
|
v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_MISC_GAIN_CTRL));
|
|
v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_AGC_MODE_CTRL));
|
|
v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1),
|
|
adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2));
|
|
v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1),
|
|
adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2));
|
|
v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1),
|
|
adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2),
|
|
adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3));
|
|
v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_HS_POS_CTRL_1),
|
|
adv7183_read(sd, ADV7183_HS_POS_CTRL_2),
|
|
adv7183_read(sd, ADV7183_HS_POS_CTRL_3));
|
|
v4l2_info(sd, "adv7183: Polarity = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_POLARITY));
|
|
v4l2_info(sd, "adv7183: ADC control = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_ADC_CTRL));
|
|
v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_SD_OFFSET_CB),
|
|
adv7183_read(sd, ADV7183_SD_OFFSET_CR));
|
|
v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_SD_SATURATION_CB),
|
|
adv7183_read(sd, ADV7183_SD_SATURATION_CR));
|
|
v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n",
|
|
adv7183_read(sd, ADV7183_DRIVE_STR));
|
|
v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name);
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
|
|
*std = decoder->std;
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
int reg;
|
|
|
|
reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF;
|
|
if (std == V4L2_STD_PAL_60)
|
|
reg |= 0x60;
|
|
else if (std == V4L2_STD_NTSC_443)
|
|
reg |= 0x70;
|
|
else if (std == V4L2_STD_PAL_N)
|
|
reg |= 0x90;
|
|
else if (std == V4L2_STD_PAL_M)
|
|
reg |= 0xA0;
|
|
else if (std == V4L2_STD_PAL_Nc)
|
|
reg |= 0xC0;
|
|
else if (std & V4L2_STD_PAL)
|
|
reg |= 0x80;
|
|
else if (std & V4L2_STD_NTSC)
|
|
reg |= 0x50;
|
|
else if (std & V4L2_STD_SECAM)
|
|
reg |= 0xE0;
|
|
else
|
|
return -EINVAL;
|
|
adv7183_write(sd, ADV7183_IN_CTRL, reg);
|
|
|
|
decoder->std = std;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_reset(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
int reg;
|
|
|
|
reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80;
|
|
adv7183_write(sd, ADV7183_POW_MANAGE, reg);
|
|
/* wait 5ms before any further i2c writes are performed */
|
|
usleep_range(5000, 10000);
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_s_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
int reg;
|
|
|
|
if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT))
|
|
return -EINVAL;
|
|
|
|
if (input != decoder->input) {
|
|
decoder->input = input;
|
|
reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0;
|
|
switch (input) {
|
|
case ADV7183_COMPOSITE1:
|
|
reg |= 0x1;
|
|
break;
|
|
case ADV7183_COMPOSITE2:
|
|
reg |= 0x2;
|
|
break;
|
|
case ADV7183_COMPOSITE3:
|
|
reg |= 0x3;
|
|
break;
|
|
case ADV7183_COMPOSITE4:
|
|
reg |= 0x4;
|
|
break;
|
|
case ADV7183_COMPOSITE5:
|
|
reg |= 0x5;
|
|
break;
|
|
case ADV7183_COMPOSITE6:
|
|
reg |= 0xB;
|
|
break;
|
|
case ADV7183_COMPOSITE7:
|
|
reg |= 0xC;
|
|
break;
|
|
case ADV7183_COMPOSITE8:
|
|
reg |= 0xD;
|
|
break;
|
|
case ADV7183_COMPOSITE9:
|
|
reg |= 0xE;
|
|
break;
|
|
case ADV7183_COMPOSITE10:
|
|
reg |= 0xF;
|
|
break;
|
|
case ADV7183_SVIDEO0:
|
|
reg |= 0x6;
|
|
break;
|
|
case ADV7183_SVIDEO1:
|
|
reg |= 0x7;
|
|
break;
|
|
case ADV7183_SVIDEO2:
|
|
reg |= 0x8;
|
|
break;
|
|
case ADV7183_COMPONENT0:
|
|
reg |= 0x9;
|
|
break;
|
|
case ADV7183_COMPONENT1:
|
|
reg |= 0xA;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
adv7183_write(sd, ADV7183_IN_CTRL, reg);
|
|
}
|
|
|
|
if (output != decoder->output) {
|
|
decoder->output = output;
|
|
reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0;
|
|
switch (output) {
|
|
case ADV7183_16BIT_OUT:
|
|
reg |= 0x9;
|
|
break;
|
|
default:
|
|
reg |= 0xC;
|
|
break;
|
|
}
|
|
adv7183_write(sd, ADV7183_OUT_CTRL, reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd = to_sd(ctrl);
|
|
int val = ctrl->val;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
if (val < 0)
|
|
val = 127 - val;
|
|
adv7183_write(sd, ADV7183_BRIGHTNESS, val);
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
adv7183_write(sd, ADV7183_CONTRAST, val);
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8);
|
|
adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF));
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8);
|
|
adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF));
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
int reg;
|
|
|
|
/* enable autodetection block */
|
|
reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF;
|
|
adv7183_write(sd, ADV7183_IN_CTRL, reg);
|
|
|
|
/* wait autodetection switch */
|
|
mdelay(10);
|
|
|
|
/* get autodetection result */
|
|
reg = adv7183_read(sd, ADV7183_STATUS_1);
|
|
switch ((reg >> 0x4) & 0x7) {
|
|
case 0:
|
|
*std &= V4L2_STD_NTSC;
|
|
break;
|
|
case 1:
|
|
*std &= V4L2_STD_NTSC_443;
|
|
break;
|
|
case 2:
|
|
*std &= V4L2_STD_PAL_M;
|
|
break;
|
|
case 3:
|
|
*std &= V4L2_STD_PAL_60;
|
|
break;
|
|
case 4:
|
|
*std &= V4L2_STD_PAL;
|
|
break;
|
|
case 5:
|
|
*std &= V4L2_STD_SECAM;
|
|
break;
|
|
case 6:
|
|
*std &= V4L2_STD_PAL_Nc;
|
|
break;
|
|
case 7:
|
|
*std &= V4L2_STD_SECAM;
|
|
break;
|
|
default:
|
|
*std = V4L2_STD_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
/* after std detection, write back user set std */
|
|
adv7183_s_std(sd, decoder->std);
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
int reg;
|
|
|
|
*status = V4L2_IN_ST_NO_SIGNAL;
|
|
reg = adv7183_read(sd, ADV7183_STATUS_1);
|
|
if (reg < 0)
|
|
return reg;
|
|
if (reg & 0x1)
|
|
*status = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (index > 0)
|
|
return -EINVAL;
|
|
|
|
*code = V4L2_MBUS_FMT_UYVY8_2X8;
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
|
|
fmt->code = V4L2_MBUS_FMT_UYVY8_2X8;
|
|
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
if (decoder->std & V4L2_STD_525_60) {
|
|
fmt->field = V4L2_FIELD_SEQ_TB;
|
|
fmt->width = 720;
|
|
fmt->height = 480;
|
|
} else {
|
|
fmt->field = V4L2_FIELD_SEQ_BT;
|
|
fmt->width = 720;
|
|
fmt->height = 576;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
|
|
adv7183_try_mbus_fmt(sd, fmt);
|
|
decoder->fmt = *fmt;
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
|
|
*fmt = decoder->fmt;
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct adv7183 *decoder = to_adv7183(sd);
|
|
|
|
if (enable)
|
|
gpio_set_value(decoder->oe_pin, 0);
|
|
else
|
|
gpio_set_value(decoder->oe_pin, 1);
|
|
udelay(1);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
|
|
{
|
|
reg->val = adv7183_read(sd, reg->reg & 0xff);
|
|
reg->size = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
|
|
{
|
|
adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct v4l2_ctrl_ops adv7183_ctrl_ops = {
|
|
.s_ctrl = adv7183_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops adv7183_core_ops = {
|
|
.log_status = adv7183_log_status,
|
|
.g_std = adv7183_g_std,
|
|
.s_std = adv7183_s_std,
|
|
.reset = adv7183_reset,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = adv7183_g_register,
|
|
.s_register = adv7183_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops adv7183_video_ops = {
|
|
.s_routing = adv7183_s_routing,
|
|
.querystd = adv7183_querystd,
|
|
.g_input_status = adv7183_g_input_status,
|
|
.enum_mbus_fmt = adv7183_enum_mbus_fmt,
|
|
.try_mbus_fmt = adv7183_try_mbus_fmt,
|
|
.s_mbus_fmt = adv7183_s_mbus_fmt,
|
|
.g_mbus_fmt = adv7183_g_mbus_fmt,
|
|
.s_stream = adv7183_s_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops adv7183_ops = {
|
|
.core = &adv7183_core_ops,
|
|
.video = &adv7183_video_ops,
|
|
};
|
|
|
|
static int adv7183_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct adv7183 *decoder;
|
|
struct v4l2_subdev *sd;
|
|
struct v4l2_ctrl_handler *hdl;
|
|
int ret;
|
|
struct v4l2_mbus_framefmt fmt;
|
|
const unsigned *pin_array;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
v4l_info(client, "chip found @ 0x%02x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
pin_array = client->dev.platform_data;
|
|
if (pin_array == NULL)
|
|
return -EINVAL;
|
|
|
|
decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
|
|
if (decoder == NULL)
|
|
return -ENOMEM;
|
|
|
|
decoder->reset_pin = pin_array[0];
|
|
decoder->oe_pin = pin_array[1];
|
|
|
|
if (devm_gpio_request_one(&client->dev, decoder->reset_pin,
|
|
GPIOF_OUT_INIT_LOW, "ADV7183 Reset")) {
|
|
v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (devm_gpio_request_one(&client->dev, decoder->oe_pin,
|
|
GPIOF_OUT_INIT_HIGH,
|
|
"ADV7183 Output Enable")) {
|
|
v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin);
|
|
return -EBUSY;
|
|
}
|
|
|
|
sd = &decoder->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &adv7183_ops);
|
|
|
|
hdl = &decoder->hdl;
|
|
v4l2_ctrl_handler_init(hdl, 4);
|
|
v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
|
|
v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
|
|
V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80);
|
|
v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
|
|
V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080);
|
|
v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
|
|
V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080);
|
|
/* hook the control handler into the driver */
|
|
sd->ctrl_handler = hdl;
|
|
if (hdl->error) {
|
|
ret = hdl->error;
|
|
|
|
v4l2_ctrl_handler_free(hdl);
|
|
return ret;
|
|
}
|
|
|
|
/* v4l2 doesn't support an autodetect standard, pick PAL as default */
|
|
decoder->std = V4L2_STD_PAL;
|
|
decoder->input = ADV7183_COMPOSITE4;
|
|
decoder->output = ADV7183_8BIT_OUT;
|
|
|
|
/* reset chip */
|
|
/* reset pulse width at least 5ms */
|
|
mdelay(10);
|
|
gpio_set_value(decoder->reset_pin, 1);
|
|
/* wait 5ms before any further i2c writes are performed */
|
|
mdelay(5);
|
|
|
|
adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs));
|
|
adv7183_s_std(sd, decoder->std);
|
|
fmt.width = 720;
|
|
fmt.height = 576;
|
|
adv7183_s_mbus_fmt(sd, &fmt);
|
|
|
|
/* initialize the hardware to the default control values */
|
|
ret = v4l2_ctrl_handler_setup(hdl);
|
|
if (ret) {
|
|
v4l2_ctrl_handler_free(hdl);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7183_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id adv7183_id[] = {
|
|
{"adv7183", 0},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, adv7183_id);
|
|
|
|
static struct i2c_driver adv7183_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "adv7183",
|
|
},
|
|
.probe = adv7183_probe,
|
|
.remove = adv7183_remove,
|
|
.id_table = adv7183_id,
|
|
};
|
|
|
|
module_i2c_driver(adv7183_driver);
|
|
|
|
MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver");
|
|
MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|