![Bjorn Helgaas](/assets/img/avatar_default.png)
These are manual fixups after running Lindent. No functional change. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
248 lines
6.4 KiB
C
248 lines
6.4 KiB
C
/*
|
|
* This file contains quirk handling code for PnP devices
|
|
* Some devices do not report all their resources, and need to have extra
|
|
* resources added. This is most easily accomplished at initialisation time
|
|
* when building up the resource structure for the first time.
|
|
*
|
|
* Copyright (c) 2000 Peter Denison <peterd@pnd-pc.demon.co.uk>
|
|
*
|
|
* Heavily based on PCI quirks handling which is
|
|
*
|
|
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/io.h>
|
|
#include "base.h"
|
|
|
|
static void quirk_awe32_resources(struct pnp_dev *dev)
|
|
{
|
|
struct pnp_port *port, *port2, *port3;
|
|
struct pnp_option *res = dev->dependent;
|
|
|
|
/*
|
|
* Unfortunately the isapnp_add_port_resource is too tightly bound
|
|
* into the PnP discovery sequence, and cannot be used. Link in the
|
|
* two extra ports (at offset 0x400 and 0x800 from the one given) by
|
|
* hand.
|
|
*/
|
|
for (; res; res = res->next) {
|
|
port2 = pnp_alloc(sizeof(struct pnp_port));
|
|
if (!port2)
|
|
return;
|
|
port3 = pnp_alloc(sizeof(struct pnp_port));
|
|
if (!port3) {
|
|
kfree(port2);
|
|
return;
|
|
}
|
|
port = res->port;
|
|
memcpy(port2, port, sizeof(struct pnp_port));
|
|
memcpy(port3, port, sizeof(struct pnp_port));
|
|
port->next = port2;
|
|
port2->next = port3;
|
|
port2->min += 0x400;
|
|
port2->max += 0x400;
|
|
port3->min += 0x800;
|
|
port3->max += 0x800;
|
|
}
|
|
printk(KERN_INFO "pnp: AWE32 quirk - adding two ports\n");
|
|
}
|
|
|
|
static void quirk_cmi8330_resources(struct pnp_dev *dev)
|
|
{
|
|
struct pnp_option *res = dev->dependent;
|
|
unsigned long tmp;
|
|
|
|
for (; res; res = res->next) {
|
|
|
|
struct pnp_irq *irq;
|
|
struct pnp_dma *dma;
|
|
|
|
for (irq = res->irq; irq; irq = irq->next) { // Valid irqs are 5, 7, 10
|
|
tmp = 0x04A0;
|
|
bitmap_copy(irq->map, &tmp, 16); // 0000 0100 1010 0000
|
|
}
|
|
|
|
for (dma = res->dma; dma; dma = dma->next) // Valid 8bit dma channels are 1,3
|
|
if ((dma->flags & IORESOURCE_DMA_TYPE_MASK) ==
|
|
IORESOURCE_DMA_8BIT)
|
|
dma->map = 0x000A;
|
|
}
|
|
printk(KERN_INFO "pnp: CMI8330 quirk - fixing interrupts and dma\n");
|
|
}
|
|
|
|
static void quirk_sb16audio_resources(struct pnp_dev *dev)
|
|
{
|
|
struct pnp_port *port;
|
|
struct pnp_option *res = dev->dependent;
|
|
int changed = 0;
|
|
|
|
/*
|
|
* The default range on the mpu port for these devices is 0x388-0x388.
|
|
* Here we increase that range so that two such cards can be
|
|
* auto-configured.
|
|
*/
|
|
|
|
for (; res; res = res->next) {
|
|
port = res->port;
|
|
if (!port)
|
|
continue;
|
|
port = port->next;
|
|
if (!port)
|
|
continue;
|
|
port = port->next;
|
|
if (!port)
|
|
continue;
|
|
if (port->min != port->max)
|
|
continue;
|
|
port->max += 0x70;
|
|
changed = 1;
|
|
}
|
|
if (changed)
|
|
printk(KERN_INFO
|
|
"pnp: SB audio device quirk - increasing port range\n");
|
|
}
|
|
|
|
static int quirk_smc_fir_enabled(struct pnp_dev *dev)
|
|
{
|
|
unsigned long firbase;
|
|
u8 bank, high, low, chip;
|
|
|
|
if (!pnp_port_valid(dev, 1))
|
|
return 0;
|
|
|
|
firbase = pnp_port_start(dev, 1);
|
|
|
|
/* Select register bank 3 */
|
|
bank = inb(firbase + 7);
|
|
bank &= 0xf0;
|
|
bank |= 3;
|
|
outb(bank, firbase + 7);
|
|
|
|
high = inb(firbase + 0);
|
|
low = inb(firbase + 1);
|
|
chip = inb(firbase + 2);
|
|
|
|
/* This corresponds to the check in smsc_ircc_present() */
|
|
if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void quirk_smc_enable(struct pnp_dev *dev)
|
|
{
|
|
struct resource fir, sir, irq;
|
|
|
|
pnp_activate_dev(dev);
|
|
if (quirk_smc_fir_enabled(dev))
|
|
return;
|
|
|
|
/*
|
|
* Sometimes the BIOS claims the device is enabled, but it reports
|
|
* the wrong FIR resources or doesn't properly configure ISA or LPC
|
|
* bridges on the way to the device.
|
|
*
|
|
* HP nc6000 and nc8000/nw8000 laptops have known problems like
|
|
* this. Fortunately, they do fix things up if we auto-configure
|
|
* the device using its _PRS and _SRS methods.
|
|
*/
|
|
dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; "
|
|
"auto-configuring\n", dev->id->id,
|
|
(unsigned long)pnp_port_start(dev, 0),
|
|
(unsigned long)pnp_port_start(dev, 1));
|
|
|
|
pnp_disable_dev(dev);
|
|
pnp_init_resource_table(&dev->res);
|
|
pnp_auto_config_dev(dev);
|
|
pnp_activate_dev(dev);
|
|
if (quirk_smc_fir_enabled(dev)) {
|
|
dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
|
|
(unsigned long)pnp_port_start(dev, 0),
|
|
(unsigned long)pnp_port_start(dev, 1));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The Toshiba Portege 4000 _CRS reports the FIR region first,
|
|
* followed by the SIR region. The BIOS will configure the bridge,
|
|
* but only if we call _SRS with SIR first, then FIR. It also
|
|
* reports the IRQ as active high, when it is really active low.
|
|
*/
|
|
dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; "
|
|
"swapping SIR/FIR and reconfiguring\n",
|
|
(unsigned long)pnp_port_start(dev, 0),
|
|
(unsigned long)pnp_port_start(dev, 1));
|
|
|
|
/*
|
|
* Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign
|
|
* these resources any more.
|
|
*/
|
|
fir = dev->res.port_resource[0];
|
|
sir = dev->res.port_resource[1];
|
|
fir.flags &= ~IORESOURCE_AUTO;
|
|
sir.flags &= ~IORESOURCE_AUTO;
|
|
|
|
irq = dev->res.irq_resource[0];
|
|
irq.flags &= ~IORESOURCE_AUTO;
|
|
irq.flags &= ~IORESOURCE_BITS;
|
|
irq.flags |= IORESOURCE_IRQ_LOWEDGE;
|
|
|
|
pnp_disable_dev(dev);
|
|
dev->res.port_resource[0] = sir;
|
|
dev->res.port_resource[1] = fir;
|
|
dev->res.irq_resource[0] = irq;
|
|
pnp_activate_dev(dev);
|
|
|
|
if (quirk_smc_fir_enabled(dev)) {
|
|
dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
|
|
(unsigned long)pnp_port_start(dev, 0),
|
|
(unsigned long)pnp_port_start(dev, 1));
|
|
return;
|
|
}
|
|
|
|
dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
|
|
"email bjorn.helgaas@hp.com\n");
|
|
}
|
|
|
|
/*
|
|
* PnP Quirks
|
|
* Cards or devices that need some tweaking due to incomplete resource info
|
|
*/
|
|
|
|
static struct pnp_fixup pnp_fixups[] = {
|
|
/* Soundblaster awe io port quirk */
|
|
{"CTL0021", quirk_awe32_resources},
|
|
{"CTL0022", quirk_awe32_resources},
|
|
{"CTL0023", quirk_awe32_resources},
|
|
/* CMI 8330 interrupt and dma fix */
|
|
{"@X@0001", quirk_cmi8330_resources},
|
|
/* Soundblaster audio device io port range quirk */
|
|
{"CTL0001", quirk_sb16audio_resources},
|
|
{"CTL0031", quirk_sb16audio_resources},
|
|
{"CTL0041", quirk_sb16audio_resources},
|
|
{"CTL0042", quirk_sb16audio_resources},
|
|
{"CTL0043", quirk_sb16audio_resources},
|
|
{"CTL0044", quirk_sb16audio_resources},
|
|
{"CTL0045", quirk_sb16audio_resources},
|
|
{"SMCf010", quirk_smc_enable},
|
|
{""}
|
|
};
|
|
|
|
void pnp_fixup_device(struct pnp_dev *dev)
|
|
{
|
|
int i = 0;
|
|
|
|
while (*pnp_fixups[i].id) {
|
|
if (compare_pnp_id(dev->id, pnp_fixups[i].id)) {
|
|
pnp_dbg("Calling quirk for %s", dev->dev.bus_id);
|
|
pnp_fixups[i].quirk_function(dev);
|
|
}
|
|
i++;
|
|
}
|
|
}
|