alistair23-linux/drivers/staging/gma500/accel_2d.c
Alan Cox c7e285bedb staging: gma500: frame buffer locking
If we are the console then a printk can hit us with a spin lock held (and
in fact the kernel will do its best to take printing lock).

In that case we cannot politely sleep when synching after an accelerated op
but must behave obnixously to be sure of getting the bits out.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 17:32:53 -07:00

415 lines
11 KiB
C

/**************************************************************************
* Copyright (c) 2007-2011, Intel Corporation.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
* develop this driver.
*
**************************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/console.h>
#include <drm/drmP.h>
#include <drm/drm.h>
#include <drm/drm_crtc.h>
#include "psb_drv.h"
#include "psb_reg.h"
#include "framebuffer.h"
/**
* psb_spank - reset the 2D engine
* @dev_priv: our PSB DRM device
*
* Soft reset the graphics engine and then reload the necessary registers.
* We use this at initialisation time but it will become relevant for
* accelerated X later
*/
void psb_spank(struct drm_psb_private *dev_priv)
{
PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET |
_PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET |
_PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET |
_PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET);
PSB_RSGX32(PSB_CR_SOFT_RESET);
msleep(1);
PSB_WSGX32(0, PSB_CR_SOFT_RESET);
wmb();
PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT,
PSB_CR_BIF_CTRL);
wmb();
(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
msleep(1);
PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT,
PSB_CR_BIF_CTRL);
(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
}
/**
* psb2_2d_wait_available - wait for FIFO room
* @dev_priv: our DRM device
* @size: size (in dwords) of the command we want to issue
*
* Wait until there is room to load the FIFO with our data. If the
* device is not responding then reset it
*/
static int psb_2d_wait_available(struct drm_psb_private *dev_priv,
unsigned size)
{
uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
unsigned long t = jiffies + HZ;
while (avail < size) {
avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
if (time_after(jiffies, t)) {
psb_spank(dev_priv);
return -EIO;
}
}
return 0;
}
/**
* psb_2d_submit - submit a 2D command
* @dev_priv: our DRM device
* @cmdbuf: command to issue
* @size: length (in dwords)
*
* Issue one or more 2D commands to the accelerator. This needs to be
* serialized later when we add the GEM interfaces for acceleration
*/
static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf,
unsigned size)
{
int ret = 0;
int i;
unsigned submit_size;
unsigned long flags;
spin_lock_irqsave(&dev_priv->lock_2d, flags);
while (size > 0) {
submit_size = (size < 0x60) ? size : 0x60;
size -= submit_size;
ret = psb_2d_wait_available(dev_priv, submit_size);
if (ret)
break;
submit_size <<= 2;
for (i = 0; i < submit_size; i += 4)
PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i);
(void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4);
}
spin_unlock_irqrestore(&dev_priv->lock_2d, flags);
return ret;
}
/**
* psb_accel_2d_copy_direction - compute blit order
* @xdir: X direction of move
* @ydir: Y direction of move
*
* Compute the correct order setings to ensure that an overlapping blit
* correctly copies all the pixels.
*/
static u32 psb_accel_2d_copy_direction(int xdir, int ydir)
{
if (xdir < 0)
return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL :
PSB_2D_COPYORDER_TR2BL;
else
return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR :
PSB_2D_COPYORDER_TL2BR;
}
/**
* psb_accel_2d_copy - accelerated 2D copy
* @dev_priv: our DRM device
* @src_offset in bytes
* @src_stride in bytes
* @src_format psb 2D format defines
* @dst_offset in bytes
* @dst_stride in bytes
* @dst_format psb 2D format defines
* @src_x offset in pixels
* @src_y offset in pixels
* @dst_x offset in pixels
* @dst_y offset in pixels
* @size_x of the copied area
* @size_y of the copied area
*
* Format and issue a 2D accelerated copy command.
*/
static int psb_accel_2d_copy(struct drm_psb_private *dev_priv,
uint32_t src_offset, uint32_t src_stride,
uint32_t src_format, uint32_t dst_offset,
uint32_t dst_stride, uint32_t dst_format,
uint16_t src_x, uint16_t src_y,
uint16_t dst_x, uint16_t dst_y,
uint16_t size_x, uint16_t size_y)
{
uint32_t blit_cmd;
uint32_t buffer[10];
uint32_t *buf;
uint32_t direction;
buf = buffer;
direction =
psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y);
if (direction == PSB_2D_COPYORDER_BR2TL ||
direction == PSB_2D_COPYORDER_TR2BL) {
src_x += size_x - 1;
dst_x += size_x - 1;
}
if (direction == PSB_2D_COPYORDER_BR2TL ||
direction == PSB_2D_COPYORDER_BL2TR) {
src_y += size_y - 1;
dst_y += size_y - 1;
}
blit_cmd =
PSB_2D_BLIT_BH |
PSB_2D_ROT_NONE |
PSB_2D_DSTCK_DISABLE |
PSB_2D_SRCCK_DISABLE |
PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction;
*buf++ = PSB_2D_FENCE_BH;
*buf++ =
PSB_2D_DST_SURF_BH | dst_format | (dst_stride <<
PSB_2D_DST_STRIDE_SHIFT);
*buf++ = dst_offset;
*buf++ =
PSB_2D_SRC_SURF_BH | src_format | (src_stride <<
PSB_2D_SRC_STRIDE_SHIFT);
*buf++ = src_offset;
*buf++ =
PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) |
(src_y << PSB_2D_SRCOFF_YSTART_SHIFT);
*buf++ = blit_cmd;
*buf++ =
(dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y <<
PSB_2D_DST_YSTART_SHIFT);
*buf++ =
(size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y <<
PSB_2D_DST_YSIZE_SHIFT);
*buf++ = PSB_2D_FLUSH_BH;
return psbfb_2d_submit(dev_priv, buffer, buf - buffer);
}
/**
* psbfb_copyarea_accel - copyarea acceleration for /dev/fb
* @info: our framebuffer
* @a: copyarea parameters from the framebuffer core
*
* Perform a 2D copy via the accelerator
*/
static void psbfb_copyarea_accel(struct fb_info *info,
const struct fb_copyarea *a)
{
struct psb_fbdev *fbdev = info->par;
struct psb_framebuffer *psbfb = &fbdev->pfb;
struct drm_device *dev = psbfb->base.dev;
struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
struct drm_psb_private *dev_priv = dev->dev_private;
uint32_t offset;
uint32_t stride;
uint32_t src_format;
uint32_t dst_format;
if (!fb)
return;
offset = psbfb->gtt->offset;
stride = fb->pitch;
switch (fb->depth) {
case 8:
src_format = PSB_2D_SRC_332RGB;
dst_format = PSB_2D_DST_332RGB;
break;
case 15:
src_format = PSB_2D_SRC_555RGB;
dst_format = PSB_2D_DST_555RGB;
break;
case 16:
src_format = PSB_2D_SRC_565RGB;
dst_format = PSB_2D_DST_565RGB;
break;
case 24:
case 32:
/* this is wrong but since we don't do blending its okay */
src_format = PSB_2D_SRC_8888ARGB;
dst_format = PSB_2D_DST_8888ARGB;
break;
default:
/* software fallback */
cfb_copyarea(info, a);
return;
}
if (!gma_power_begin(dev, false)) {
cfb_copyarea(info, a);
return;
}
psb_accel_2d_copy(dev_priv,
offset, stride, src_format,
offset, stride, dst_format,
a->sx, a->sy, a->dx, a->dy, a->width, a->height);
gma_power_end(dev);
}
/**
* psbfb_copyarea - 2D copy interface
* @info: our framebuffer
* @region: region to copy
*
* Copy an area of the framebuffer console either by the accelerator
* or directly using the cfb helpers according to the request
*/
void psbfb_copyarea(struct fb_info *info,
const struct fb_copyarea *region)
{
if (unlikely(info->state != FBINFO_STATE_RUNNING))
return;
/* Avoid the 8 pixel erratum */
if (region->width == 8 || region->height == 8 ||
(info->flags & FBINFO_HWACCEL_DISABLED))
return cfb_copyarea(info, region);
psbfb_copyarea_accel(info, region);
}
/**
* psbfb_sync - synchronize 2D
* @info: our framebuffer
*
* Wait for the 2D engine to quiesce so that we can do CPU
* access to the framebuffer again
*/
int psbfb_sync(struct fb_info *info)
{
struct psb_fbdev *fbdev = info->par;
struct psb_framebuffer *psbfb = &fbdev->pfb;
struct drm_device *dev = psbfb->base.dev;
struct drm_psb_private *dev_priv = dev->dev_private;
unsigned long _end = jiffies + DRM_HZ;
int busy = 0;
unsigned long flags;
spin_lock_irqsave(&dev_priv->lock_2d, flags);
/*
* First idle the 2D engine.
*/
if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) &&
((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0))
goto out;
do {
busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
cpu_relax();
} while (busy && !time_after_eq(jiffies, _end));
if (busy)
busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
if (busy)
goto out;
do {
busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
_PSB_C2B_STATUS_BUSY) != 0);
cpu_relax();
} while (busy && !time_after_eq(jiffies, _end));
if (busy)
busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
_PSB_C2B_STATUS_BUSY) != 0);
out:
spin_unlock_irqrestore(&dev_priv->lock_2d, flags);
return (busy) ? -EBUSY : 0;
}
int psb_accel_ioctl(struct drm_device *dev, void *data, struct drm_file *file)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_psb_2d_op *op = data;
u32 *op_ptr = &op->cmd[0];
int i;
struct drm_gem_object *obj;
struct gtt_range *gtt;
int err = -EINVAL;
if (!dev_priv->ops->accel_2d)
return -EOPNOTSUPP;
if (op->size > PSB_2D_OP_BUFLEN)
return -EINVAL;
/* The GEM object being used. We need to support separate src/dst/etc
in the end but for now keep them all the same */
obj = drm_gem_object_lookup(dev, file, op->src);
if (obj == NULL)
return -ENOENT;
gtt = container_of(obj, struct gtt_range, gem);
if (psb_gtt_pin(gtt) < 0)
goto bad_2;
for (i = 0; i < op->size; i++, op_ptr++) {
u32 r = *op_ptr & 0xF0000000;
/* Fill in the GTT offsets for the command buffer */
if (r == PSB_2D_SRC_SURF_BH ||
r == PSB_2D_DST_SURF_BH ||
r == PSB_2D_MASK_SURF_BH ||
r == PSB_2D_PAT_SURF_BH) {
i++;
op_ptr++;
if (i == op->size)
goto bad;
if (*op_ptr)
goto bad;
*op_ptr = gtt->offset;
continue;
}
}
psbfb_2d_submit(dev_priv, op->cmd, op->size);
err = 0;
bad:
psb_gtt_unpin(gtt);
bad_2:
drm_gem_object_unreference(obj);
return err;
}