redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/rk3066a.dtsi
Romain Perier 89f668765a ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs 
This patch adds the right pins topology for the MAC and MDIO
found in RK3066 SoCs. Boards based on this SoC have an
initial support for the emac-rockchip dt-binding.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-02 12:24:29 +01:00

612 lines
14 KiB
Plaintext
Raw Blame History

/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3066a-cru.h>
#include "rk3xxx.dtsi"
/ {
compatible = "rockchip,rk3066a";
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
operating-points = <
/* kHz uV */
1008000 1075000
816000 1025000
600000 1025000
504000 1000000
312000 975000
>;
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x1>;
};
};
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x10080000 0x10000>;
smp-sram@0 {
compatible = "rockchip,rk3066-smp-sram";
reg = <0x0 0x50>;
};
};
i2s0: i2s@10118000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x10118000 0x2000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
dmas = <&dmac1_s 4>, <&dmac1_s 5>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
status = "disabled";
};
i2s1: i2s@1011a000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x1011a000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
dmas = <&dmac1_s 6>, <&dmac1_s 7>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
status = "disabled";
};
i2s2: i2s@1011c000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x1011c000 0x2000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
dmas = <&dmac1_s 9>, <&dmac1_s 10>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
status = "disabled";
};
cru: clock-controller@20000000 {
compatible = "rockchip,rk3066a-cru";
reg = <0x20000000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
};
timer@2000e000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2000e000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
clock-names = "timer", "pclk";
};
timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
clock-names = "timer", "pclk";
};
timer@2003a000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2003a000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
clock-names = "timer", "pclk";
};
pinctrl: pinctrl {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio4@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio6@2000a000 {
compatible = "rockchip,gpio-bank";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_default: pcfg_pull_default {
bias-pull-pin-default;
};
pcfg_pull_none: pcfg_pull_none {
bias-disable;
};
emac {
emac_xfer: emac-xfer {
rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
<RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
<RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
<RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
<RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
<RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */
<RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
<RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */
};
emac_mdio: emac-mdio {
rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */
<RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */
};
};
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
};
emmc_cmd: emmc-cmd {
rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
};
emmc_rst: emmc-rst {
rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
};
/*
* The data pins are shared between nandc and emmc and
* not accessible through pinctrl. Also they should've
* been already set correctly by firmware, as
* flash/emmc is the boot-device.
*/
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
<RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
<RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
<RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
<RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_out: pwm1-out {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_out: pwm2-out {
rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_out: pwm3-out {
rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_tx: spi0-tx {
rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_rx: spi0-rx {
rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_rx: spi1-rx {
rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_tx: spi1-tx {
rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_cs1: spi1-cs1 {
rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
};
uart0_cts: uart0-cts {
rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
};
uart1_cts: uart1-cts {
rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
};
uart1_rts: uart1-rts {
rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
};
uart3_cts: uart3-cts {
rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
};
uart3_rts: uart3-rts {
rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
};
};
sd0 {
sd0_clk: sd0-clk {
rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_cmd: sd0-cmd {
rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_cd: sd0-cd {
rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_wp: sd0-wp {
rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_bus1: sd0-bus-width1 {
rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
};
sd0_bus4: sd0-bus-width4 {
rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
};
};
sd1 {
sd1_clk: sd1-clk {
rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_cmd: sd1-cmd {
rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_cd: sd1-cd {
rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_wp: sd1-wp {
rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_bus1: sd1-bus-width1 {
rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
};
sd1_bus4: sd1-bus-width4 {
rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
};
};
i2s0 {
i2s0_bus: i2s0-bus {
rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
};
};
i2s1 {
i2s1_bus: i2s1-bus {
rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
};
};
i2s2 {
i2s2_bus: i2s2-bus {
rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
};
};
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_xfer>;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_out>;
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_out>;
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pwm3_out>;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
};
&wdt {
compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
};
&emac {
compatible = "rockchip,rk3066-emac";
};
View git blame Copy permalink