![Thomas Gleixner](/assets/img/avatar_default.png)
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
671 lines
15 KiB
C
671 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* lm75.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include "lm75.h"
|
|
|
|
|
|
/*
|
|
* This driver handles the LM75 and compatible digital temperature sensors.
|
|
*/
|
|
|
|
enum lm75_type { /* keep sorted in alphabetical order */
|
|
adt75,
|
|
ds1775,
|
|
ds75,
|
|
ds7505,
|
|
g751,
|
|
lm75,
|
|
lm75a,
|
|
lm75b,
|
|
max6625,
|
|
max6626,
|
|
max31725,
|
|
mcp980x,
|
|
stds75,
|
|
stlm75,
|
|
tcn75,
|
|
tmp100,
|
|
tmp101,
|
|
tmp105,
|
|
tmp112,
|
|
tmp175,
|
|
tmp275,
|
|
tmp75,
|
|
tmp75b,
|
|
tmp75c,
|
|
};
|
|
|
|
/* Addresses scanned */
|
|
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
|
|
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
/* The LM75 registers */
|
|
#define LM75_REG_TEMP 0x00
|
|
#define LM75_REG_CONF 0x01
|
|
#define LM75_REG_HYST 0x02
|
|
#define LM75_REG_MAX 0x03
|
|
|
|
/* Each client has this additional data */
|
|
struct lm75_data {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
u8 orig_conf;
|
|
u8 resolution; /* In bits, between 9 and 16 */
|
|
u8 resolution_limits;
|
|
unsigned int sample_time; /* In ms */
|
|
};
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
|
|
{
|
|
return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
|
|
}
|
|
|
|
static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct lm75_data *data = dev_get_drvdata(dev);
|
|
unsigned int regval;
|
|
int err, reg;
|
|
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
*val = data->sample_time;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
reg = LM75_REG_TEMP;
|
|
break;
|
|
case hwmon_temp_max:
|
|
reg = LM75_REG_MAX;
|
|
break;
|
|
case hwmon_temp_max_hyst:
|
|
reg = LM75_REG_HYST;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
err = regmap_read(data->regmap, reg, ®val);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*val = lm75_reg_to_mc(regval, data->resolution);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long temp)
|
|
{
|
|
struct lm75_data *data = dev_get_drvdata(dev);
|
|
u8 resolution;
|
|
int reg;
|
|
|
|
if (type != hwmon_temp)
|
|
return -EINVAL;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_max:
|
|
reg = LM75_REG_MAX;
|
|
break;
|
|
case hwmon_temp_max_hyst:
|
|
reg = LM75_REG_HYST;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Resolution of limit registers is assumed to be the same as the
|
|
* temperature input register resolution unless given explicitly.
|
|
*/
|
|
if (data->resolution_limits)
|
|
resolution = data->resolution_limits;
|
|
else
|
|
resolution = data->resolution;
|
|
|
|
temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
|
|
temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
|
|
1000) << (16 - resolution);
|
|
|
|
return regmap_write(data->regmap, reg, temp);
|
|
}
|
|
|
|
static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
return 0444;
|
|
}
|
|
break;
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
return 0444;
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_max_hyst:
|
|
return 0644;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct hwmon_channel_info *lm75_info[] = {
|
|
HWMON_CHANNEL_INFO(chip,
|
|
HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops lm75_hwmon_ops = {
|
|
.is_visible = lm75_is_visible,
|
|
.read = lm75_read,
|
|
.write = lm75_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info lm75_chip_info = {
|
|
.ops = &lm75_hwmon_ops,
|
|
.info = lm75_info,
|
|
};
|
|
|
|
static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg != LM75_REG_TEMP;
|
|
}
|
|
|
|
static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg == LM75_REG_TEMP;
|
|
}
|
|
|
|
static const struct regmap_config lm75_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.max_register = LM75_REG_MAX,
|
|
.writeable_reg = lm75_is_writeable_reg,
|
|
.volatile_reg = lm75_is_volatile_reg,
|
|
.val_format_endian = REGMAP_ENDIAN_BIG,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static void lm75_remove(void *data)
|
|
{
|
|
struct lm75_data *lm75 = data;
|
|
struct i2c_client *client = lm75->client;
|
|
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
|
|
}
|
|
|
|
static int
|
|
lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct lm75_data *data;
|
|
int status, err;
|
|
u8 set_mask, clr_mask;
|
|
int new;
|
|
enum lm75_type kind;
|
|
|
|
if (client->dev.of_node)
|
|
kind = (enum lm75_type)of_device_get_match_data(&client->dev);
|
|
else
|
|
kind = id->driver_data;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -EIO;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
|
|
* Then tweak to be more precise when appropriate.
|
|
*/
|
|
set_mask = 0;
|
|
clr_mask = LM75_SHUTDOWN; /* continuous conversions */
|
|
|
|
switch (kind) {
|
|
case adt75:
|
|
clr_mask |= 1 << 5; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 8;
|
|
break;
|
|
case ds1775:
|
|
case ds75:
|
|
case stds75:
|
|
clr_mask |= 3 << 5;
|
|
set_mask |= 2 << 5; /* 11-bit mode */
|
|
data->resolution = 11;
|
|
data->sample_time = MSEC_PER_SEC;
|
|
break;
|
|
case stlm75:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 5;
|
|
break;
|
|
case ds7505:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case g751:
|
|
case lm75:
|
|
case lm75a:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 2;
|
|
break;
|
|
case lm75b:
|
|
data->resolution = 11;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case max6625:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case max6626:
|
|
data->resolution = 12;
|
|
data->resolution_limits = 9;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case max31725:
|
|
data->resolution = 16;
|
|
data->sample_time = MSEC_PER_SEC / 8;
|
|
break;
|
|
case tcn75:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 8;
|
|
break;
|
|
case mcp980x:
|
|
data->resolution_limits = 9;
|
|
/* fall through */
|
|
case tmp100:
|
|
case tmp101:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC;
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
break;
|
|
case tmp112:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case tmp105:
|
|
case tmp175:
|
|
case tmp275:
|
|
case tmp75:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 2;
|
|
break;
|
|
case tmp75b: /* not one-shot mode, Conversion rate 37Hz */
|
|
clr_mask |= 1 << 15 | 0x3 << 13;
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 37;
|
|
break;
|
|
case tmp75c:
|
|
clr_mask |= 1 << 5; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
}
|
|
|
|
/* configure as specified */
|
|
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
data->orig_conf = status;
|
|
new = status & ~clr_mask;
|
|
new |= set_mask;
|
|
if (status != new)
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);
|
|
|
|
err = devm_add_action_or_reset(dev, lm75_remove, data);
|
|
if (err)
|
|
return err;
|
|
|
|
dev_dbg(dev, "Config %02x\n", new);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
|
data, &lm75_chip_info,
|
|
NULL);
|
|
if (IS_ERR(hwmon_dev))
|
|
return PTR_ERR(hwmon_dev);
|
|
|
|
dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm75_ids[] = {
|
|
{ "adt75", adt75, },
|
|
{ "ds1775", ds1775, },
|
|
{ "ds75", ds75, },
|
|
{ "ds7505", ds7505, },
|
|
{ "g751", g751, },
|
|
{ "lm75", lm75, },
|
|
{ "lm75a", lm75a, },
|
|
{ "lm75b", lm75b, },
|
|
{ "max6625", max6625, },
|
|
{ "max6626", max6626, },
|
|
{ "max31725", max31725, },
|
|
{ "max31726", max31725, },
|
|
{ "mcp980x", mcp980x, },
|
|
{ "stds75", stds75, },
|
|
{ "stlm75", stlm75, },
|
|
{ "tcn75", tcn75, },
|
|
{ "tmp100", tmp100, },
|
|
{ "tmp101", tmp101, },
|
|
{ "tmp105", tmp105, },
|
|
{ "tmp112", tmp112, },
|
|
{ "tmp175", tmp175, },
|
|
{ "tmp275", tmp275, },
|
|
{ "tmp75", tmp75, },
|
|
{ "tmp75b", tmp75b, },
|
|
{ "tmp75c", tmp75c, },
|
|
{ /* LIST END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm75_ids);
|
|
|
|
static const struct of_device_id __maybe_unused lm75_of_match[] = {
|
|
{
|
|
.compatible = "adi,adt75",
|
|
.data = (void *)adt75
|
|
},
|
|
{
|
|
.compatible = "dallas,ds1775",
|
|
.data = (void *)ds1775
|
|
},
|
|
{
|
|
.compatible = "dallas,ds75",
|
|
.data = (void *)ds75
|
|
},
|
|
{
|
|
.compatible = "dallas,ds7505",
|
|
.data = (void *)ds7505
|
|
},
|
|
{
|
|
.compatible = "gmt,g751",
|
|
.data = (void *)g751
|
|
},
|
|
{
|
|
.compatible = "national,lm75",
|
|
.data = (void *)lm75
|
|
},
|
|
{
|
|
.compatible = "national,lm75a",
|
|
.data = (void *)lm75a
|
|
},
|
|
{
|
|
.compatible = "national,lm75b",
|
|
.data = (void *)lm75b
|
|
},
|
|
{
|
|
.compatible = "maxim,max6625",
|
|
.data = (void *)max6625
|
|
},
|
|
{
|
|
.compatible = "maxim,max6626",
|
|
.data = (void *)max6626
|
|
},
|
|
{
|
|
.compatible = "maxim,max31725",
|
|
.data = (void *)max31725
|
|
},
|
|
{
|
|
.compatible = "maxim,max31726",
|
|
.data = (void *)max31725
|
|
},
|
|
{
|
|
.compatible = "maxim,mcp980x",
|
|
.data = (void *)mcp980x
|
|
},
|
|
{
|
|
.compatible = "st,stds75",
|
|
.data = (void *)stds75
|
|
},
|
|
{
|
|
.compatible = "st,stlm75",
|
|
.data = (void *)stlm75
|
|
},
|
|
{
|
|
.compatible = "microchip,tcn75",
|
|
.data = (void *)tcn75
|
|
},
|
|
{
|
|
.compatible = "ti,tmp100",
|
|
.data = (void *)tmp100
|
|
},
|
|
{
|
|
.compatible = "ti,tmp101",
|
|
.data = (void *)tmp101
|
|
},
|
|
{
|
|
.compatible = "ti,tmp105",
|
|
.data = (void *)tmp105
|
|
},
|
|
{
|
|
.compatible = "ti,tmp112",
|
|
.data = (void *)tmp112
|
|
},
|
|
{
|
|
.compatible = "ti,tmp175",
|
|
.data = (void *)tmp175
|
|
},
|
|
{
|
|
.compatible = "ti,tmp275",
|
|
.data = (void *)tmp275
|
|
},
|
|
{
|
|
.compatible = "ti,tmp75",
|
|
.data = (void *)tmp75
|
|
},
|
|
{
|
|
.compatible = "ti,tmp75b",
|
|
.data = (void *)tmp75b
|
|
},
|
|
{
|
|
.compatible = "ti,tmp75c",
|
|
.data = (void *)tmp75c
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lm75_of_match);
|
|
|
|
#define LM75A_ID 0xA1
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int lm75_detect(struct i2c_client *new_client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int i;
|
|
int conf, hyst, os;
|
|
bool is_lm75a = 0;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Now, we do the remaining detection. There is no identification-
|
|
* dedicated register so we have to rely on several tricks:
|
|
* unused bits, registers cycling over 8-address boundaries,
|
|
* addresses 0x04-0x07 returning the last read value.
|
|
* The cycling+unused addresses combination is not tested,
|
|
* since it would significantly slow the detection down and would
|
|
* hardly add any value.
|
|
*
|
|
* The National Semiconductor LM75A is different than earlier
|
|
* LM75s. It has an ID byte of 0xaX (where X is the chip
|
|
* revision, with 1 being the only revision in existence) in
|
|
* register 7, and unused registers return 0xff rather than the
|
|
* last read value.
|
|
*
|
|
* Note that this function only detects the original National
|
|
* Semiconductor LM75 and the LM75A. Clones from other vendors
|
|
* aren't detected, on purpose, because they are typically never
|
|
* found on PC hardware. They are found on embedded designs where
|
|
* they can be instantiated explicitly so detection is not needed.
|
|
* The absence of identification registers on all these clones
|
|
* would make their exhaustive detection very difficult and weak,
|
|
* and odds are that the driver would bind to unsupported devices.
|
|
*/
|
|
|
|
/* Unused bits */
|
|
conf = i2c_smbus_read_byte_data(new_client, 1);
|
|
if (conf & 0xe0)
|
|
return -ENODEV;
|
|
|
|
/* First check for LM75A */
|
|
if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
|
|
/* LM75A returns 0xff on unused registers so
|
|
just to be sure we check for that too. */
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != 0xff
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
|
|
return -ENODEV;
|
|
is_lm75a = 1;
|
|
hyst = i2c_smbus_read_byte_data(new_client, 2);
|
|
os = i2c_smbus_read_byte_data(new_client, 3);
|
|
} else { /* Traditional style LM75 detection */
|
|
/* Unused addresses */
|
|
hyst = i2c_smbus_read_byte_data(new_client, 2);
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 7) != hyst)
|
|
return -ENODEV;
|
|
os = i2c_smbus_read_byte_data(new_client, 3);
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 7) != os)
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* It is very unlikely that this is a LM75 if both
|
|
* hysteresis and temperature limit registers are 0.
|
|
*/
|
|
if (hyst == 0 && os == 0)
|
|
return -ENODEV;
|
|
|
|
/* Addresses cycling */
|
|
for (i = 8; i <= 248; i += 40) {
|
|
if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
|
|
|| i2c_smbus_read_byte_data(new_client, i + 2) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, i + 3) != os)
|
|
return -ENODEV;
|
|
if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
|
|
!= LM75A_ID)
|
|
return -ENODEV;
|
|
}
|
|
|
|
strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int lm75_suspend(struct device *dev)
|
|
{
|
|
int status;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
status = status | LM75_SHUTDOWN;
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
|
|
return 0;
|
|
}
|
|
|
|
static int lm75_resume(struct device *dev)
|
|
{
|
|
int status;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
status = status & ~LM75_SHUTDOWN;
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops lm75_dev_pm_ops = {
|
|
.suspend = lm75_suspend,
|
|
.resume = lm75_resume,
|
|
};
|
|
#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
|
|
#else
|
|
#define LM75_DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct i2c_driver lm75_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "lm75",
|
|
.of_match_table = of_match_ptr(lm75_of_match),
|
|
.pm = LM75_DEV_PM_OPS,
|
|
},
|
|
.probe = lm75_probe,
|
|
.id_table = lm75_ids,
|
|
.detect = lm75_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(lm75_driver);
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
|
|
MODULE_DESCRIPTION("LM75 driver");
|
|
MODULE_LICENSE("GPL");
|