![Ben Hutchings](/assets/img/avatar_default.png)
Following the removal of the unused struct net_device * parameter from
the NAPI functions named *netif_rx_* in commit 908a7a1
, they are
exactly equivalent to the corresponding *napi_* functions and are
therefore redundant.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
769 lines
26 KiB
C
769 lines
26 KiB
C
/*
|
|
drivers/net/tulip/interrupt.c
|
|
|
|
Copyright 2000,2001 The Linux Kernel Team
|
|
Written/copyright 1994-2001 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
|
|
for more information on this driver.
|
|
Please submit bugs to http://bugzilla.kernel.org/ .
|
|
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include "tulip.h"
|
|
#include <linux/etherdevice.h>
|
|
|
|
int tulip_rx_copybreak;
|
|
unsigned int tulip_max_interrupt_work;
|
|
|
|
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
|
|
#define MIT_SIZE 15
|
|
#define MIT_TABLE 15 /* We use 0 or max */
|
|
|
|
static unsigned int mit_table[MIT_SIZE+1] =
|
|
{
|
|
/* CRS11 21143 hardware Mitigation Control Interrupt
|
|
We use only RX mitigation we other techniques for
|
|
TX intr. mitigation.
|
|
|
|
31 Cycle Size (timer control)
|
|
30:27 TX timer in 16 * Cycle size
|
|
26:24 TX No pkts before Int.
|
|
23:20 RX timer in Cycle size
|
|
19:17 RX No pkts before Int.
|
|
16 Continues Mode (CM)
|
|
*/
|
|
|
|
0x0, /* IM disabled */
|
|
0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */
|
|
0x80150000,
|
|
0x80270000,
|
|
0x80370000,
|
|
0x80490000,
|
|
0x80590000,
|
|
0x80690000,
|
|
0x807B0000,
|
|
0x808B0000,
|
|
0x809D0000,
|
|
0x80AD0000,
|
|
0x80BD0000,
|
|
0x80CF0000,
|
|
0x80DF0000,
|
|
// 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */
|
|
0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */
|
|
};
|
|
#endif
|
|
|
|
|
|
int tulip_refill_rx(struct net_device *dev)
|
|
{
|
|
struct tulip_private *tp = netdev_priv(dev);
|
|
int entry;
|
|
int refilled = 0;
|
|
|
|
/* Refill the Rx ring buffers. */
|
|
for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
|
|
entry = tp->dirty_rx % RX_RING_SIZE;
|
|
if (tp->rx_buffers[entry].skb == NULL) {
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
|
|
skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
|
|
if (skb == NULL)
|
|
break;
|
|
|
|
mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
tp->rx_buffers[entry].mapping = mapping;
|
|
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
|
|
refilled++;
|
|
}
|
|
tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
|
|
}
|
|
if(tp->chip_id == LC82C168) {
|
|
if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) {
|
|
/* Rx stopped due to out of buffers,
|
|
* restart it
|
|
*/
|
|
iowrite32(0x01, tp->base_addr + CSR2);
|
|
}
|
|
}
|
|
return refilled;
|
|
}
|
|
|
|
#ifdef CONFIG_TULIP_NAPI
|
|
|
|
void oom_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct tulip_private *tp = netdev_priv(dev);
|
|
napi_schedule(&tp->napi);
|
|
}
|
|
|
|
int tulip_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct tulip_private *tp = container_of(napi, struct tulip_private, napi);
|
|
struct net_device *dev = tp->dev;
|
|
int entry = tp->cur_rx % RX_RING_SIZE;
|
|
int work_done = 0;
|
|
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
|
|
int received = 0;
|
|
#endif
|
|
|
|
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
|
|
|
|
/* that one buffer is needed for mit activation; or might be a
|
|
bug in the ring buffer code; check later -- JHS*/
|
|
|
|
if (budget >=RX_RING_SIZE) budget--;
|
|
#endif
|
|
|
|
if (tulip_debug > 4)
|
|
printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
|
|
tp->rx_ring[entry].status);
|
|
|
|
do {
|
|
if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
|
|
printk(KERN_DEBUG " In tulip_poll(), hardware disappeared.\n");
|
|
break;
|
|
}
|
|
/* Acknowledge current RX interrupt sources. */
|
|
iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
|
|
|
|
|
|
/* If we own the next entry, it is a new packet. Send it up. */
|
|
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
|
|
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
|
|
|
|
if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
|
|
break;
|
|
|
|
if (tulip_debug > 5)
|
|
printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
|
|
dev->name, entry, status);
|
|
|
|
if (++work_done >= budget)
|
|
goto not_done;
|
|
|
|
if ((status & 0x38008300) != 0x0300) {
|
|
if ((status & 0x38000300) != 0x0300) {
|
|
/* Ingore earlier buffers. */
|
|
if ((status & 0xffff) != 0x7fff) {
|
|
if (tulip_debug > 1)
|
|
printk(KERN_WARNING "%s: Oversized Ethernet frame "
|
|
"spanned multiple buffers, status %8.8x!\n",
|
|
dev->name, status);
|
|
tp->stats.rx_length_errors++;
|
|
}
|
|
} else if (status & RxDescFatalErr) {
|
|
/* There was a fatal error. */
|
|
if (tulip_debug > 2)
|
|
printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
|
|
dev->name, status);
|
|
tp->stats.rx_errors++; /* end of a packet.*/
|
|
if (status & 0x0890) tp->stats.rx_length_errors++;
|
|
if (status & 0x0004) tp->stats.rx_frame_errors++;
|
|
if (status & 0x0002) tp->stats.rx_crc_errors++;
|
|
if (status & 0x0001) tp->stats.rx_fifo_errors++;
|
|
}
|
|
} else {
|
|
/* Omit the four octet CRC from the length. */
|
|
short pkt_len = ((status >> 16) & 0x7ff) - 4;
|
|
struct sk_buff *skb;
|
|
|
|
#ifndef final_version
|
|
if (pkt_len > 1518) {
|
|
printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
|
|
dev->name, pkt_len, pkt_len);
|
|
pkt_len = 1518;
|
|
tp->stats.rx_length_errors++;
|
|
}
|
|
#endif
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < tulip_rx_copybreak
|
|
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
pci_dma_sync_single_for_cpu(tp->pdev,
|
|
tp->rx_buffers[entry].mapping,
|
|
pkt_len, PCI_DMA_FROMDEVICE);
|
|
#if ! defined(__alpha__)
|
|
skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
|
|
pkt_len);
|
|
skb_put(skb, pkt_len);
|
|
#else
|
|
memcpy(skb_put(skb, pkt_len),
|
|
tp->rx_buffers[entry].skb->data,
|
|
pkt_len);
|
|
#endif
|
|
pci_dma_sync_single_for_device(tp->pdev,
|
|
tp->rx_buffers[entry].mapping,
|
|
pkt_len, PCI_DMA_FROMDEVICE);
|
|
} else { /* Pass up the skb already on the Rx ring. */
|
|
char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
|
|
pkt_len);
|
|
|
|
#ifndef final_version
|
|
if (tp->rx_buffers[entry].mapping !=
|
|
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
|
|
printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
|
|
"do not match in tulip_rx: %08x vs. %08llx %p / %p.\n",
|
|
dev->name,
|
|
le32_to_cpu(tp->rx_ring[entry].buffer1),
|
|
(unsigned long long)tp->rx_buffers[entry].mapping,
|
|
skb->head, temp);
|
|
}
|
|
#endif
|
|
|
|
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
|
|
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
|
|
|
|
tp->rx_buffers[entry].skb = NULL;
|
|
tp->rx_buffers[entry].mapping = 0;
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
netif_receive_skb(skb);
|
|
|
|
tp->stats.rx_packets++;
|
|
tp->stats.rx_bytes += pkt_len;
|
|
}
|
|
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
|
|
received++;
|
|
#endif
|
|
|
|
entry = (++tp->cur_rx) % RX_RING_SIZE;
|
|
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
|
|
tulip_refill_rx(dev);
|
|
|
|
}
|
|
|
|
/* New ack strategy... irq does not ack Rx any longer
|
|
hopefully this helps */
|
|
|
|
/* Really bad things can happen here... If new packet arrives
|
|
* and an irq arrives (tx or just due to occasionally unset
|
|
* mask), it will be acked by irq handler, but new thread
|
|
* is not scheduled. It is major hole in design.
|
|
* No idea how to fix this if "playing with fire" will fail
|
|
* tomorrow (night 011029). If it will not fail, we won
|
|
* finally: amount of IO did not increase at all. */
|
|
} while ((ioread32(tp->base_addr + CSR5) & RxIntr));
|
|
|
|
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
|
|
|
|
/* We use this simplistic scheme for IM. It's proven by
|
|
real life installations. We can have IM enabled
|
|
continuesly but this would cause unnecessary latency.
|
|
Unfortunely we can't use all the NET_RX_* feedback here.
|
|
This would turn on IM for devices that is not contributing
|
|
to backlog congestion with unnecessary latency.
|
|
|
|
We monitor the device RX-ring and have:
|
|
|
|
HW Interrupt Mitigation either ON or OFF.
|
|
|
|
ON: More then 1 pkt received (per intr.) OR we are dropping
|
|
OFF: Only 1 pkt received
|
|
|
|
Note. We only use min and max (0, 15) settings from mit_table */
|
|
|
|
|
|
if( tp->flags & HAS_INTR_MITIGATION) {
|
|
if( received > 1 ) {
|
|
if( ! tp->mit_on ) {
|
|
tp->mit_on = 1;
|
|
iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11);
|
|
}
|
|
}
|
|
else {
|
|
if( tp->mit_on ) {
|
|
tp->mit_on = 0;
|
|
iowrite32(0, tp->base_addr + CSR11);
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
|
|
|
|
tulip_refill_rx(dev);
|
|
|
|
/* If RX ring is not full we are out of memory. */
|
|
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
|
|
goto oom;
|
|
|
|
/* Remove us from polling list and enable RX intr. */
|
|
|
|
napi_complete(napi);
|
|
iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
|
|
|
|
/* The last op happens after poll completion. Which means the following:
|
|
* 1. it can race with disabling irqs in irq handler
|
|
* 2. it can race with dise/enabling irqs in other poll threads
|
|
* 3. if an irq raised after beginning loop, it will be immediately
|
|
* triggered here.
|
|
*
|
|
* Summarizing: the logic results in some redundant irqs both
|
|
* due to races in masking and due to too late acking of already
|
|
* processed irqs. But it must not result in losing events.
|
|
*/
|
|
|
|
return work_done;
|
|
|
|
not_done:
|
|
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
|
|
tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
|
|
tulip_refill_rx(dev);
|
|
|
|
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
|
|
goto oom;
|
|
|
|
return work_done;
|
|
|
|
oom: /* Executed with RX ints disabled */
|
|
|
|
/* Start timer, stop polling, but do not enable rx interrupts. */
|
|
mod_timer(&tp->oom_timer, jiffies+1);
|
|
|
|
/* Think: timer_pending() was an explicit signature of bug.
|
|
* Timer can be pending now but fired and completed
|
|
* before we did napi_complete(). See? We would lose it. */
|
|
|
|
/* remove ourselves from the polling list */
|
|
napi_complete(napi);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
#else /* CONFIG_TULIP_NAPI */
|
|
|
|
static int tulip_rx(struct net_device *dev)
|
|
{
|
|
struct tulip_private *tp = netdev_priv(dev);
|
|
int entry = tp->cur_rx % RX_RING_SIZE;
|
|
int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
|
|
int received = 0;
|
|
|
|
if (tulip_debug > 4)
|
|
printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
|
|
tp->rx_ring[entry].status);
|
|
/* If we own the next entry, it is a new packet. Send it up. */
|
|
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
|
|
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
|
|
|
|
if (tulip_debug > 5)
|
|
printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
|
|
dev->name, entry, status);
|
|
if (--rx_work_limit < 0)
|
|
break;
|
|
if ((status & 0x38008300) != 0x0300) {
|
|
if ((status & 0x38000300) != 0x0300) {
|
|
/* Ingore earlier buffers. */
|
|
if ((status & 0xffff) != 0x7fff) {
|
|
if (tulip_debug > 1)
|
|
printk(KERN_WARNING "%s: Oversized Ethernet frame "
|
|
"spanned multiple buffers, status %8.8x!\n",
|
|
dev->name, status);
|
|
tp->stats.rx_length_errors++;
|
|
}
|
|
} else if (status & RxDescFatalErr) {
|
|
/* There was a fatal error. */
|
|
if (tulip_debug > 2)
|
|
printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
|
|
dev->name, status);
|
|
tp->stats.rx_errors++; /* end of a packet.*/
|
|
if (status & 0x0890) tp->stats.rx_length_errors++;
|
|
if (status & 0x0004) tp->stats.rx_frame_errors++;
|
|
if (status & 0x0002) tp->stats.rx_crc_errors++;
|
|
if (status & 0x0001) tp->stats.rx_fifo_errors++;
|
|
}
|
|
} else {
|
|
/* Omit the four octet CRC from the length. */
|
|
short pkt_len = ((status >> 16) & 0x7ff) - 4;
|
|
struct sk_buff *skb;
|
|
|
|
#ifndef final_version
|
|
if (pkt_len > 1518) {
|
|
printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
|
|
dev->name, pkt_len, pkt_len);
|
|
pkt_len = 1518;
|
|
tp->stats.rx_length_errors++;
|
|
}
|
|
#endif
|
|
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < tulip_rx_copybreak
|
|
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
pci_dma_sync_single_for_cpu(tp->pdev,
|
|
tp->rx_buffers[entry].mapping,
|
|
pkt_len, PCI_DMA_FROMDEVICE);
|
|
#if ! defined(__alpha__)
|
|
skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
|
|
pkt_len);
|
|
skb_put(skb, pkt_len);
|
|
#else
|
|
memcpy(skb_put(skb, pkt_len),
|
|
tp->rx_buffers[entry].skb->data,
|
|
pkt_len);
|
|
#endif
|
|
pci_dma_sync_single_for_device(tp->pdev,
|
|
tp->rx_buffers[entry].mapping,
|
|
pkt_len, PCI_DMA_FROMDEVICE);
|
|
} else { /* Pass up the skb already on the Rx ring. */
|
|
char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
|
|
pkt_len);
|
|
|
|
#ifndef final_version
|
|
if (tp->rx_buffers[entry].mapping !=
|
|
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
|
|
printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
|
|
"do not match in tulip_rx: %08x vs. %Lx %p / %p.\n",
|
|
dev->name,
|
|
le32_to_cpu(tp->rx_ring[entry].buffer1),
|
|
(long long)tp->rx_buffers[entry].mapping,
|
|
skb->head, temp);
|
|
}
|
|
#endif
|
|
|
|
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
|
|
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
|
|
|
|
tp->rx_buffers[entry].skb = NULL;
|
|
tp->rx_buffers[entry].mapping = 0;
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
netif_rx(skb);
|
|
|
|
tp->stats.rx_packets++;
|
|
tp->stats.rx_bytes += pkt_len;
|
|
}
|
|
received++;
|
|
entry = (++tp->cur_rx) % RX_RING_SIZE;
|
|
}
|
|
return received;
|
|
}
|
|
#endif /* CONFIG_TULIP_NAPI */
|
|
|
|
static inline unsigned int phy_interrupt (struct net_device *dev)
|
|
{
|
|
#ifdef __hppa__
|
|
struct tulip_private *tp = netdev_priv(dev);
|
|
int csr12 = ioread32(tp->base_addr + CSR12) & 0xff;
|
|
|
|
if (csr12 != tp->csr12_shadow) {
|
|
/* ack interrupt */
|
|
iowrite32(csr12 | 0x02, tp->base_addr + CSR12);
|
|
tp->csr12_shadow = csr12;
|
|
/* do link change stuff */
|
|
spin_lock(&tp->lock);
|
|
tulip_check_duplex(dev);
|
|
spin_unlock(&tp->lock);
|
|
/* clear irq ack bit */
|
|
iowrite32(csr12 & ~0x02, tp->base_addr + CSR12);
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
irqreturn_t tulip_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_instance;
|
|
struct tulip_private *tp = netdev_priv(dev);
|
|
void __iomem *ioaddr = tp->base_addr;
|
|
int csr5;
|
|
int missed;
|
|
int rx = 0;
|
|
int tx = 0;
|
|
int oi = 0;
|
|
int maxrx = RX_RING_SIZE;
|
|
int maxtx = TX_RING_SIZE;
|
|
int maxoi = TX_RING_SIZE;
|
|
#ifdef CONFIG_TULIP_NAPI
|
|
int rxd = 0;
|
|
#else
|
|
int entry;
|
|
#endif
|
|
unsigned int work_count = tulip_max_interrupt_work;
|
|
unsigned int handled = 0;
|
|
|
|
/* Let's see whether the interrupt really is for us */
|
|
csr5 = ioread32(ioaddr + CSR5);
|
|
|
|
if (tp->flags & HAS_PHY_IRQ)
|
|
handled = phy_interrupt (dev);
|
|
|
|
if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
|
|
return IRQ_RETVAL(handled);
|
|
|
|
tp->nir++;
|
|
|
|
do {
|
|
|
|
#ifdef CONFIG_TULIP_NAPI
|
|
|
|
if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
|
|
rxd++;
|
|
/* Mask RX intrs and add the device to poll list. */
|
|
iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
|
|
napi_schedule(&tp->napi);
|
|
|
|
if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
|
|
break;
|
|
}
|
|
|
|
/* Acknowledge the interrupt sources we handle here ASAP
|
|
the poll function does Rx and RxNoBuf acking */
|
|
|
|
iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
|
|
|
|
#else
|
|
/* Acknowledge all of the current interrupt sources ASAP. */
|
|
iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
|
|
|
|
|
|
if (csr5 & (RxIntr | RxNoBuf)) {
|
|
rx += tulip_rx(dev);
|
|
tulip_refill_rx(dev);
|
|
}
|
|
|
|
#endif /* CONFIG_TULIP_NAPI */
|
|
|
|
if (tulip_debug > 4)
|
|
printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
|
|
dev->name, csr5, ioread32(ioaddr + CSR5));
|
|
|
|
|
|
if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
|
|
unsigned int dirty_tx;
|
|
|
|
spin_lock(&tp->lock);
|
|
|
|
for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
|
|
dirty_tx++) {
|
|
int entry = dirty_tx % TX_RING_SIZE;
|
|
int status = le32_to_cpu(tp->tx_ring[entry].status);
|
|
|
|
if (status < 0)
|
|
break; /* It still has not been Txed */
|
|
|
|
/* Check for Rx filter setup frames. */
|
|
if (tp->tx_buffers[entry].skb == NULL) {
|
|
/* test because dummy frames not mapped */
|
|
if (tp->tx_buffers[entry].mapping)
|
|
pci_unmap_single(tp->pdev,
|
|
tp->tx_buffers[entry].mapping,
|
|
sizeof(tp->setup_frame),
|
|
PCI_DMA_TODEVICE);
|
|
continue;
|
|
}
|
|
|
|
if (status & 0x8000) {
|
|
/* There was an major error, log it. */
|
|
#ifndef final_version
|
|
if (tulip_debug > 1)
|
|
printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
|
|
dev->name, status);
|
|
#endif
|
|
tp->stats.tx_errors++;
|
|
if (status & 0x4104) tp->stats.tx_aborted_errors++;
|
|
if (status & 0x0C00) tp->stats.tx_carrier_errors++;
|
|
if (status & 0x0200) tp->stats.tx_window_errors++;
|
|
if (status & 0x0002) tp->stats.tx_fifo_errors++;
|
|
if ((status & 0x0080) && tp->full_duplex == 0)
|
|
tp->stats.tx_heartbeat_errors++;
|
|
} else {
|
|
tp->stats.tx_bytes +=
|
|
tp->tx_buffers[entry].skb->len;
|
|
tp->stats.collisions += (status >> 3) & 15;
|
|
tp->stats.tx_packets++;
|
|
}
|
|
|
|
pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
|
|
tp->tx_buffers[entry].skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
/* Free the original skb. */
|
|
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
|
|
tp->tx_buffers[entry].skb = NULL;
|
|
tp->tx_buffers[entry].mapping = 0;
|
|
tx++;
|
|
}
|
|
|
|
#ifndef final_version
|
|
if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
|
|
printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
|
|
dev->name, dirty_tx, tp->cur_tx);
|
|
dirty_tx += TX_RING_SIZE;
|
|
}
|
|
#endif
|
|
|
|
if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
|
|
netif_wake_queue(dev);
|
|
|
|
tp->dirty_tx = dirty_tx;
|
|
if (csr5 & TxDied) {
|
|
if (tulip_debug > 2)
|
|
printk(KERN_WARNING "%s: The transmitter stopped."
|
|
" CSR5 is %x, CSR6 %x, new CSR6 %x.\n",
|
|
dev->name, csr5, ioread32(ioaddr + CSR6), tp->csr6);
|
|
tulip_restart_rxtx(tp);
|
|
}
|
|
spin_unlock(&tp->lock);
|
|
}
|
|
|
|
/* Log errors. */
|
|
if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */
|
|
if (csr5 == 0xffffffff)
|
|
break;
|
|
if (csr5 & TxJabber) tp->stats.tx_errors++;
|
|
if (csr5 & TxFIFOUnderflow) {
|
|
if ((tp->csr6 & 0xC000) != 0xC000)
|
|
tp->csr6 += 0x4000; /* Bump up the Tx threshold */
|
|
else
|
|
tp->csr6 |= 0x00200000; /* Store-n-forward. */
|
|
/* Restart the transmit process. */
|
|
tulip_restart_rxtx(tp);
|
|
iowrite32(0, ioaddr + CSR1);
|
|
}
|
|
if (csr5 & (RxDied | RxNoBuf)) {
|
|
if (tp->flags & COMET_MAC_ADDR) {
|
|
iowrite32(tp->mc_filter[0], ioaddr + 0xAC);
|
|
iowrite32(tp->mc_filter[1], ioaddr + 0xB0);
|
|
}
|
|
}
|
|
if (csr5 & RxDied) { /* Missed a Rx frame. */
|
|
tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
|
|
tp->stats.rx_errors++;
|
|
tulip_start_rxtx(tp);
|
|
}
|
|
/*
|
|
* NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
|
|
* call is ever done under the spinlock
|
|
*/
|
|
if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
|
|
if (tp->link_change)
|
|
(tp->link_change)(dev, csr5);
|
|
}
|
|
if (csr5 & SystemError) {
|
|
int error = (csr5 >> 23) & 7;
|
|
/* oops, we hit a PCI error. The code produced corresponds
|
|
* to the reason:
|
|
* 0 - parity error
|
|
* 1 - master abort
|
|
* 2 - target abort
|
|
* Note that on parity error, we should do a software reset
|
|
* of the chip to get it back into a sane state (according
|
|
* to the 21142/3 docs that is).
|
|
* -- rmk
|
|
*/
|
|
printk(KERN_ERR "%s: (%lu) System Error occurred (%d)\n",
|
|
dev->name, tp->nir, error);
|
|
}
|
|
/* Clear all error sources, included undocumented ones! */
|
|
iowrite32(0x0800f7ba, ioaddr + CSR5);
|
|
oi++;
|
|
}
|
|
if (csr5 & TimerInt) {
|
|
|
|
if (tulip_debug > 2)
|
|
printk(KERN_ERR "%s: Re-enabling interrupts, %8.8x.\n",
|
|
dev->name, csr5);
|
|
iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
|
|
tp->ttimer = 0;
|
|
oi++;
|
|
}
|
|
if (tx > maxtx || rx > maxrx || oi > maxoi) {
|
|
if (tulip_debug > 1)
|
|
printk(KERN_WARNING "%s: Too much work during an interrupt, "
|
|
"csr5=0x%8.8x. (%lu) (%d,%d,%d)\n", dev->name, csr5, tp->nir, tx, rx, oi);
|
|
|
|
/* Acknowledge all interrupt sources. */
|
|
iowrite32(0x8001ffff, ioaddr + CSR5);
|
|
if (tp->flags & HAS_INTR_MITIGATION) {
|
|
/* Josip Loncaric at ICASE did extensive experimentation
|
|
to develop a good interrupt mitigation setting.*/
|
|
iowrite32(0x8b240000, ioaddr + CSR11);
|
|
} else if (tp->chip_id == LC82C168) {
|
|
/* the LC82C168 doesn't have a hw timer.*/
|
|
iowrite32(0x00, ioaddr + CSR7);
|
|
mod_timer(&tp->timer, RUN_AT(HZ/50));
|
|
} else {
|
|
/* Mask all interrupting sources, set timer to
|
|
re-enable. */
|
|
iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
|
|
iowrite32(0x0012, ioaddr + CSR11);
|
|
}
|
|
break;
|
|
}
|
|
|
|
work_count--;
|
|
if (work_count == 0)
|
|
break;
|
|
|
|
csr5 = ioread32(ioaddr + CSR5);
|
|
|
|
#ifdef CONFIG_TULIP_NAPI
|
|
if (rxd)
|
|
csr5 &= ~RxPollInt;
|
|
} while ((csr5 & (TxNoBuf |
|
|
TxDied |
|
|
TxIntr |
|
|
TimerInt |
|
|
/* Abnormal intr. */
|
|
RxDied |
|
|
TxFIFOUnderflow |
|
|
TxJabber |
|
|
TPLnkFail |
|
|
SystemError )) != 0);
|
|
#else
|
|
} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
|
|
|
|
tulip_refill_rx(dev);
|
|
|
|
/* check if the card is in suspend mode */
|
|
entry = tp->dirty_rx % RX_RING_SIZE;
|
|
if (tp->rx_buffers[entry].skb == NULL) {
|
|
if (tulip_debug > 1)
|
|
printk(KERN_WARNING "%s: in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", dev->name, tp->nir, tp->cur_rx, tp->ttimer, rx);
|
|
if (tp->chip_id == LC82C168) {
|
|
iowrite32(0x00, ioaddr + CSR7);
|
|
mod_timer(&tp->timer, RUN_AT(HZ/50));
|
|
} else {
|
|
if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
|
|
if (tulip_debug > 1)
|
|
printk(KERN_WARNING "%s: in rx suspend mode: (%lu) set timer\n", dev->name, tp->nir);
|
|
iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
|
|
ioaddr + CSR7);
|
|
iowrite32(TimerInt, ioaddr + CSR5);
|
|
iowrite32(12, ioaddr + CSR11);
|
|
tp->ttimer = 1;
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_TULIP_NAPI */
|
|
|
|
if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
|
|
tp->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
|
|
}
|
|
|
|
if (tulip_debug > 4)
|
|
printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n",
|
|
dev->name, ioread32(ioaddr + CSR5));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|