redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-pxa/poodle.c
David Howells 40220c1a19 IRQ: Use the new typedef for interrupt handler function pointers 
Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time.  This was scripted with the
following small shell script:

#!/bin/sh
egrep -nHrl -e 'irqreturn_t[ 	]*[(][*]' $* |
while read i
do
    echo $i
    perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
done

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-09 12:19:47 +01:00

419 lines
9.5 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-pxa/poodle.c
*
* Support for the SHARP Poodle Board.
*
* Based on:
* linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Change Log
* 12-Dec-2002 Sharp Corporation for Poodle
* John Lenz <lenz@cs.wisc.edu> updates to 2.6
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
#include <asm/arch/poodle.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/sharpsl.h>
#include <asm/arch/ssp.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
#include "sharpsl.h"
static struct resource poodle_scoop_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config poodle_scoop_setup = {
.io_dir = POODLE_SCOOP_IO_DIR,
.io_out = POODLE_SCOOP_IO_OUT,
};
struct platform_device poodle_scoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &poodle_scoop_setup,
},
.num_resources = ARRAY_SIZE(poodle_scoop_resources),
.resource = poodle_scoop_resources,
};
static void poodle_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
.dev = &poodle_scoop_device.dev,
.irq = POODLE_IRQ_GPIO_CF_IRQ,
.cd_irq = POODLE_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config poodle_pcmcia_config = {
.devs = &poodle_pcmcia_scoop[0],
.num_devs = 1,
.pcmcia_init = poodle_pcmcia_init,
};
EXPORT_SYMBOL(poodle_scoop_device);
/* LoCoMo device */
static struct resource locomo_resources[] = {
[0] = {
.start = 0x10000000,
.end = 0x10001fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_GPIO(10),
.end = IRQ_GPIO(10),
.flags = IORESOURCE_IRQ,
},
};
struct platform_device poodle_locomo_device = {
.name = "locomo",
.id = 0,
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
};
EXPORT_SYMBOL(poodle_locomo_device);
/*
* Poodle SSP Device
*/
struct platform_device poodle_ssp_device = {
.name = "corgi-ssp",
.id = -1,
};
struct corgissp_machinfo poodle_ssp_machinfo = {
.port = 1,
.cs_lcdcon = -1,
.cs_ads7846 = -1,
.cs_max1111 = -1,
.clk_lcdcon = 2,
.clk_ads7846 = 36,
.clk_max1111 = 2,
};
/*
* Poodle Touch Screen Device
*/
static struct resource poodlets_resources[] = {
[0] = {
.start = POODLE_IRQ_GPIO_TP_INT,
.end = POODLE_IRQ_GPIO_TP_INT,
.flags = IORESOURCE_IRQ,
},
};
static unsigned long poodle_get_hsync_len(void)
{
return 0;
}
static void poodle_null_hsync(void)
{
}
static struct corgits_machinfo poodle_ts_machinfo = {
.get_hsync_len = poodle_get_hsync_len,
.put_hsync = poodle_null_hsync,
.wait_hsync = poodle_null_hsync,
};
static struct platform_device poodle_ts_device = {
.name = "corgi-ts",
.dev = {
.platform_data = &poodle_ts_machinfo,
},
.id = -1,
.num_resources = ARRAY_SIZE(poodlets_resources),
.resource = poodlets_resources,
};
/*
* MMC/SD Device
*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static struct pxamci_platform_data poodle_mci_platform_data;
static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
{
int err;
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
return 0;
}
static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
mdelay(2);
GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
} else {
GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
}
}
static int poodle_mci_get_ro(struct device *dev)
{
return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
}
static void poodle_mci_exit(struct device *dev, void *data)
{
free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
}
static struct pxamci_platform_data poodle_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = poodle_mci_init,
.get_ro = poodle_mci_get_ro,
.setpower = poodle_mci_setpower,
.exit = poodle_mci_exit,
};
/*
* Irda
*/
static void poodle_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF) {
GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
} else {
GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
}
}
static struct pxaficp_platform_data poodle_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = poodle_irda_transceiver_mode,
};
/*
* USB Device Controller
*/
static void poodle_udc_command(int cmd)
{
switch(cmd) {
case PXA2XX_UDC_CMD_CONNECT:
GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
break;
case PXA2XX_UDC_CMD_DISCONNECT:
GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
break;
}
}
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; poodle can't tell connection status */
.udc_command = poodle_udc_command,
};
/* PXAFB device */
static struct pxafb_mode_info poodle_fb_mode = {
.pixclock = 144700,
.xres = 320,
.yres = 240,
.bpp = 16,
.hsync_len = 7,
.left_margin = 11,
.right_margin = 30,
.vsync_len = 2,
.upper_margin = 2,
.lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
};
static struct pxafb_mach_info poodle_fb_info = {
.modes = &poodle_fb_mode,
.num_modes = 1,
.lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
.lccr3 = 0,
};
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
&poodle_ssp_device,
&poodle_ts_device,
};
static void poodle_poweroff(void)
{
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
static void poodle_restart(char mode)
{
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
static void __init poodle_init(void)
{
int ret = 0;
pm_power_off = poodle_poweroff;
arm_pm_restart = poodle_restart;
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x00008000;
PGSR1 = 0x003F0202;
PGSR2 = 0x0001C000;
PCFR |= PCFR_OPDE;
/* cpu initialize */
/* Pgsr Register */
PGSR0 = 0x0146dd80;
PGSR1 = 0x03bf0890;
PGSR2 = 0x0001c000;
/* Alternate Register */
GAFR0_L = 0x01001000;
GAFR0_U = 0x591a8010;
GAFR1_L = 0x900a8451;
GAFR1_U = 0xaaa5aaaa;
GAFR2_L = 0x8aaaaaaa;
GAFR2_U = 0x00000002;
/* Direction Register */
GPDR0 = 0xd3f0904c;
GPDR1 = 0xfcffb7d3;
GPDR2 = 0x0001ffff;
/* Output Register */
GPCR0 = 0x00000000;
GPCR1 = 0x00000000;
GPCR2 = 0x00000000;
GPSR0 = 0x00400000;
GPSR1 = 0x00000000;
GPSR2 = 0x00000000;
set_pxa_fb_parent(&poodle_locomo_device.dev);
set_pxa_fb_info(&poodle_fb_info);
pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
}
corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
}
static void __init fixup_poodle(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
mi->bank[0].size = (32*1024*1024);
}
MACHINE_START(POODLE, "SHARP Poodle")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_poodle,
.map_io = pxa_map_io,
.init_irq = pxa_init_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
MACHINE_END
View git blame Copy permalink