alistair23-linux/drivers/hwmon/lis3lv02d.h
Giuseppe Bilotta 137bad3234 lis3lv02d: support both one- and two-byte sensors
Sensors responding with 0x3B to WHO_AM_I only have one data register per
direction, thus returning a signed byte from the position which is
occupied by the MSB in sensors responding with 0x3A.

Since multiple sensors share the reply to WHO_AM_I, we rename the defines
to better indicate what they identify (family of single and double
precision sensors).

We support both kind of sensors by checking for the sensor type on init
and defining appropriate data-access routines and sensor limits (for the
joystick) depending on what we find.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Eric Piel <Eric.Piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 15:37:54 -08:00

198 lines
4.9 KiB
C

/*
* lis3lv02d.h - ST LIS3LV02DL accelerometer driver
*
* Copyright (C) 2007-2008 Yan Burman
* Copyright (C) 2008 Eric Piel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
* be connected via SPI. There exists also several similar chips (such as LIS302DL or
* LIS3L02DQ) and they have slightly different registers, but we can provide a
* common interface for all of them.
* They can also be connected via I²C.
*/
/* 2-byte registers */
#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */
/* 1-byte registers */
#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */
enum lis3lv02d_reg {
WHO_AM_I = 0x0F,
OFFSET_X = 0x16,
OFFSET_Y = 0x17,
OFFSET_Z = 0x18,
GAIN_X = 0x19,
GAIN_Y = 0x1A,
GAIN_Z = 0x1B,
CTRL_REG1 = 0x20,
CTRL_REG2 = 0x21,
CTRL_REG3 = 0x22,
HP_FILTER_RESET = 0x23,
STATUS_REG = 0x27,
OUTX_L = 0x28,
OUTX_H = 0x29,
OUTX = 0x29,
OUTY_L = 0x2A,
OUTY_H = 0x2B,
OUTY = 0x2B,
OUTZ_L = 0x2C,
OUTZ_H = 0x2D,
OUTZ = 0x2D,
FF_WU_CFG = 0x30,
FF_WU_SRC = 0x31,
FF_WU_ACK = 0x32,
FF_WU_THS_L = 0x34,
FF_WU_THS_H = 0x35,
FF_WU_DURATION = 0x36,
DD_CFG = 0x38,
DD_SRC = 0x39,
DD_ACK = 0x3A,
DD_THSI_L = 0x3C,
DD_THSI_H = 0x3D,
DD_THSE_L = 0x3E,
DD_THSE_H = 0x3F,
};
enum lis3lv02d_ctrl1 {
CTRL1_Xen = 0x01,
CTRL1_Yen = 0x02,
CTRL1_Zen = 0x04,
CTRL1_ST = 0x08,
CTRL1_DF0 = 0x10,
CTRL1_DF1 = 0x20,
CTRL1_PD0 = 0x40,
CTRL1_PD1 = 0x80,
};
enum lis3lv02d_ctrl2 {
CTRL2_DAS = 0x01,
CTRL2_SIM = 0x02,
CTRL2_DRDY = 0x04,
CTRL2_IEN = 0x08,
CTRL2_BOOT = 0x10,
CTRL2_BLE = 0x20,
CTRL2_BDU = 0x40, /* Block Data Update */
CTRL2_FS = 0x80, /* Full Scale selection */
};
enum lis3lv02d_ctrl3 {
CTRL3_CFS0 = 0x01,
CTRL3_CFS1 = 0x02,
CTRL3_FDS = 0x10,
CTRL3_HPFF = 0x20,
CTRL3_HPDD = 0x40,
CTRL3_ECK = 0x80,
};
enum lis3lv02d_status_reg {
STATUS_XDA = 0x01,
STATUS_YDA = 0x02,
STATUS_ZDA = 0x04,
STATUS_XYZDA = 0x08,
STATUS_XOR = 0x10,
STATUS_YOR = 0x20,
STATUS_ZOR = 0x40,
STATUS_XYZOR = 0x80,
};
enum lis3lv02d_ff_wu_cfg {
FF_WU_CFG_XLIE = 0x01,
FF_WU_CFG_XHIE = 0x02,
FF_WU_CFG_YLIE = 0x04,
FF_WU_CFG_YHIE = 0x08,
FF_WU_CFG_ZLIE = 0x10,
FF_WU_CFG_ZHIE = 0x20,
FF_WU_CFG_LIR = 0x40,
FF_WU_CFG_AOI = 0x80,
};
enum lis3lv02d_ff_wu_src {
FF_WU_SRC_XL = 0x01,
FF_WU_SRC_XH = 0x02,
FF_WU_SRC_YL = 0x04,
FF_WU_SRC_YH = 0x08,
FF_WU_SRC_ZL = 0x10,
FF_WU_SRC_ZH = 0x20,
FF_WU_SRC_IA = 0x40,
};
enum lis3lv02d_dd_cfg {
DD_CFG_XLIE = 0x01,
DD_CFG_XHIE = 0x02,
DD_CFG_YLIE = 0x04,
DD_CFG_YHIE = 0x08,
DD_CFG_ZLIE = 0x10,
DD_CFG_ZHIE = 0x20,
DD_CFG_LIR = 0x40,
DD_CFG_IEND = 0x80,
};
enum lis3lv02d_dd_src {
DD_SRC_XL = 0x01,
DD_SRC_XH = 0x02,
DD_SRC_YL = 0x04,
DD_SRC_YH = 0x08,
DD_SRC_ZL = 0x10,
DD_SRC_ZH = 0x20,
DD_SRC_IA = 0x40,
};
struct axis_conversion {
s8 x;
s8 y;
s8 z;
};
struct acpi_lis3lv02d {
struct acpi_device *device; /* The ACPI device */
acpi_status (*init) (acpi_handle handle);
acpi_status (*write) (acpi_handle handle, int reg, u8 val);
acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
s16 (*read_data) (acpi_handle handle, int reg);
int mdps_max_val;
struct input_dev *idev; /* input device */
struct task_struct *kthread; /* kthread for input */
struct mutex lock;
struct platform_device *pdev; /* platform device */
atomic_t count; /* interrupt count after last read */
int xcalib; /* calibrated null value for x */
int ycalib; /* calibrated null value for y */
int zcalib; /* calibrated null value for z */
unsigned char is_on; /* whether the device is on or off */
unsigned char usage; /* usage counter */
struct axis_conversion ac; /* hw -> logical axis */
u32 irq; /* IRQ number */
struct fasync_struct *async_queue; /* queue for the misc device */
wait_queue_head_t misc_wait; /* Wait queue for the misc device */
unsigned long misc_opened; /* bit0: whether the device is open */
};
int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
int lis3lv02d_joystick_enable(void);
void lis3lv02d_joystick_disable(void);
void lis3lv02d_poweroff(acpi_handle handle);
void lis3lv02d_poweron(acpi_handle handle);
int lis3lv02d_remove_fs(void);
extern struct acpi_lis3lv02d adev;