redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
Srinivas Pandruvada a35c5d1aa9 iio: imu: inv_mpu6050: Create mux clients for ACPI 
This is a follow up patches after adding i2c mux adapter for bypass
mode. Potentially many different types of sensor can be attached to
INVMPU6XXX device, which can be connected to main cpu i2c bus in
bypass mode.
Why do we need this?
The system ACPI table entry will consist of only one device for
INV6XXX, assuming that this driver will handle all connected sensors.
That is not true for the Linux driver. There are bunch of IIO drivers
for each sensors, hence we created a mux on this device. So to load
these additional drivers, we need to create i2c devices for them
in this driver using this mux adapter.

There are multiple options:
1. Use the auto detect feature, this needs a new i2c class for the
adapter as the existing HWMON class is not acceptable. Also the
autodetect has overhead of executing detect method for each
matching class of adapters.
This is a simple implementation. This option was previously submitted
with not a happy feedback.

2. Option is use ACPI magic and parse the configuration data. What
we need to create a i2c device at a minimum is address and a name.
Address can be obtained for secondary device in more or less in a
standard way from using _CRS element. But there is no name. To get
name we need to process proprietary vendor data. Not having name is
not fun, as you have to create device using the device name of
INVN6XXXX, respecting driver duplicate name space restriction.
Also each client driver needs to have this name in the id table.
Since multiple driver can be loaded, the driver should be able to
detect its presence and gracefully exit for the other client driver
to take it over.
So we use two step process:
- Use DMI to id platform and parse propritery data. This is not uncommon
for many x86 platform specific driver. We will get both name and address.
The change created necessary infrastructure to add more properitery vendor
data parsing.
- If DMI match fails, then create device on INV6XXX-client (we can't
create with same name as INV6XXX as it will cause duplicate name and driver
model will reject.) With this each client sensor driver which needs to get
attached via INV6XXXX, need this name in the id table and detect the
physical presence of sensor in probe and exit if not found.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-02-25 12:02:59 +00:00

257 lines
7.8 KiB
C
Raw Blame History

/*
* Copyright (C) 2012 Invensense, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/i2c.h>
#include <linux/kfifo.h>
#include <linux/spinlock.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/platform_data/invensense_mpu6050.h>
/**
* struct inv_mpu6050_reg_map - Notable registers.
* @sample_rate_div: Divider applied to gyro output rate.
* @lpf: Configures internal low pass filter.
* @user_ctrl: Enables/resets the FIFO.
* @fifo_en: Determines which data will appear in FIFO.
* @gyro_config: gyro config register.
* @accl_config: accel config register
* @fifo_count_h: Upper byte of FIFO count.
* @fifo_r_w: FIFO register.
* @raw_gyro: Address of first gyro register.
* @raw_accl: Address of first accel register.
* @temperature: temperature register
* @int_enable: Interrupt enable register.
* @pwr_mgmt_1: Controls chip's power state and clock source.
* @pwr_mgmt_2: Controls power state of individual sensors.
*/
struct inv_mpu6050_reg_map {
u8 sample_rate_div;
u8 lpf;
u8 user_ctrl;
u8 fifo_en;
u8 gyro_config;
u8 accl_config;
u8 fifo_count_h;
u8 fifo_r_w;
u8 raw_gyro;
u8 raw_accl;
u8 temperature;
u8 int_enable;
u8 pwr_mgmt_1;
u8 pwr_mgmt_2;
u8 int_pin_cfg;
};
/*device enum */
enum inv_devices {
INV_MPU6050,
INV_MPU6500,
INV_NUM_PARTS
};
/**
* struct inv_mpu6050_chip_config - Cached chip configuration data.
* @fsr: Full scale range.
* @lpf: Digital low pass filter frequency.
* @accl_fs: accel full scale range.
* @enable: master enable state.
* @accl_fifo_enable: enable accel data output
* @gyro_fifo_enable: enable gyro data output
* @fifo_rate: FIFO update rate.
*/
struct inv_mpu6050_chip_config {
unsigned int fsr:2;
unsigned int lpf:3;
unsigned int accl_fs:2;
unsigned int enable:1;
unsigned int accl_fifo_enable:1;
unsigned int gyro_fifo_enable:1;
u16 fifo_rate;
};
/**
* struct inv_mpu6050_hw - Other important hardware information.
* @num_reg: Number of registers on device.
* @name: name of the chip.
* @reg: register map of the chip.
* @config: configuration of the chip.
*/
struct inv_mpu6050_hw {
u8 num_reg;
u8 *name;
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_chip_config *config;
};
/*
* struct inv_mpu6050_state - Driver state variables.
* @TIMESTAMP_FIFO_SIZE: fifo size for timestamp.
* @trig: IIO trigger.
* @chip_config: Cached attribute information.
* @reg: Map of important registers.
* @hw: Other hardware-specific information.
* @chip_type: chip type.
* @time_stamp_lock: spin lock to time stamp.
* @client: i2c client handle.
* @plat_data: platform data.
* @timestamps: kfifo queue to store time stamp.
*/
struct inv_mpu6050_state {
#define TIMESTAMP_FIFO_SIZE 16
struct iio_trigger *trig;
struct inv_mpu6050_chip_config chip_config;
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_hw *hw;
enum inv_devices chip_type;
spinlock_t time_stamp_lock;
struct i2c_client *client;
struct i2c_adapter *mux_adapter;
struct i2c_client *mux_client;
unsigned int powerup_count;
struct inv_mpu6050_platform_data plat_data;
DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
};
/*register and associated bit definition*/
#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
#define INV_MPU6050_REG_CONFIG 0x1A
#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
#define INV_MPU6050_REG_FIFO_EN 0x23
#define INV_MPU6050_BIT_ACCEL_OUT 0x08
#define INV_MPU6050_BITS_GYRO_OUT 0x70
#define INV_MPU6050_REG_INT_ENABLE 0x38
#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
#define INV_MPU6050_BIT_DMP_INT_EN 0x02
#define INV_MPU6050_REG_RAW_ACCEL 0x3B
#define INV_MPU6050_REG_TEMPERATURE 0x41
#define INV_MPU6050_REG_RAW_GYRO 0x43
#define INV_MPU6050_REG_USER_CTRL 0x6A
#define INV_MPU6050_BIT_FIFO_RST 0x04
#define INV_MPU6050_BIT_DMP_RST 0x08
#define INV_MPU6050_BIT_I2C_MST_EN 0x20
#define INV_MPU6050_BIT_FIFO_EN 0x40
#define INV_MPU6050_BIT_DMP_EN 0x80
#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
#define INV_MPU6050_BIT_H_RESET 0x80
#define INV_MPU6050_BIT_SLEEP 0x40
#define INV_MPU6050_BIT_CLK_MASK 0x7
#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
#define INV_MPU6050_REG_FIFO_R_W 0x74
#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
#define INV_MPU6050_FIFO_COUNT_BYTE 2
#define INV_MPU6050_FIFO_THRESHOLD 500
#define INV_MPU6050_POWER_UP_TIME 100
#define INV_MPU6050_TEMP_UP_TIME 100
#define INV_MPU6050_SENSOR_UP_TIME 30
#define INV_MPU6050_REG_UP_TIME 5
#define INV_MPU6050_TEMP_OFFSET 12421
#define INV_MPU6050_TEMP_SCALE 2941
#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
#define INV_MPU6050_THREE_AXIS 3
#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
/* 6 + 6 round up and plus 8 */
#define INV_MPU6050_OUTPUT_DATA_SIZE 24
#define INV_MPU6050_REG_INT_PIN_CFG 0x37
#define INV_MPU6050_BIT_BYPASS_EN 0x2
/* init parameters */
#define INV_MPU6050_INIT_FIFO_RATE 50
#define INV_MPU6050_TIME_STAMP_TOR 5
#define INV_MPU6050_MAX_FIFO_RATE 1000
#define INV_MPU6050_MIN_FIFO_RATE 4
#define INV_MPU6050_ONE_K_HZ 1000
/* scan element definition */
enum inv_mpu6050_scan {
INV_MPU6050_SCAN_ACCL_X,
INV_MPU6050_SCAN_ACCL_Y,
INV_MPU6050_SCAN_ACCL_Z,
INV_MPU6050_SCAN_GYRO_X,
INV_MPU6050_SCAN_GYRO_Y,
INV_MPU6050_SCAN_GYRO_Z,
INV_MPU6050_SCAN_TIMESTAMP,
};
enum inv_mpu6050_filter_e {
INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
INV_MPU6050_FILTER_188HZ,
INV_MPU6050_FILTER_98HZ,
INV_MPU6050_FILTER_42HZ,
INV_MPU6050_FILTER_20HZ,
INV_MPU6050_FILTER_10HZ,
INV_MPU6050_FILTER_5HZ,
INV_MPU6050_FILTER_2100HZ_NOLPF,
NUM_MPU6050_FILTER
};
/* IIO attribute address */
enum INV_MPU6050_IIO_ATTR_ADDR {
ATTR_GYRO_MATRIX,
ATTR_ACCL_MATRIX,
};
enum inv_mpu6050_accl_fs_e {
INV_MPU6050_FS_02G = 0,
INV_MPU6050_FS_04G,
INV_MPU6050_FS_08G,
INV_MPU6050_FS_16G,
NUM_ACCL_FSR
};
enum inv_mpu6050_fsr_e {
INV_MPU6050_FSR_250DPS = 0,
INV_MPU6050_FSR_500DPS,
INV_MPU6050_FSR_1000DPS,
INV_MPU6050_FSR_2000DPS,
NUM_MPU6050_FSR
};
enum inv_mpu6050_clock_sel_e {
INV_CLK_INTERNAL = 0,
INV_CLK_PLL,
NUM_CLK
};
irqreturn_t inv_mpu6050_irq_handler(int irq, void *p);
irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev);
void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st);
int inv_reset_fifo(struct iio_dev *indio_dev);
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st);
void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st);
View git blame Copy permalink