![Song Qiang](/assets/img/avatar_default.png)
PNI RM3100 is a high resolution, large signal immunity magnetometer, composed of 3 single sensors and a processing chip with a MagI2C interface. Following functions are available: - Single-shot measurement from /sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw - Triggerd buffer measurement. - DRDY pin for data ready trigger. - Both i2c and spi interface are supported. - Both interrupt and polling measurement is supported, depends on if the 'interrupts' in DT is declared. Signed-off-by: Song Qiang <songqiang1304521@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
31 lines
1 KiB
Makefile
31 lines
1 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for industrial I/O Magnetometer sensor drivers
|
|
#
|
|
|
|
# When adding new entries keep the list in alphabetical order
|
|
obj-$(CONFIG_AK8974) += ak8974.o
|
|
obj-$(CONFIG_AK8975) += ak8975.o
|
|
obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
|
|
obj-$(CONFIG_BMC150_MAGN_I2C) += bmc150_magn_i2c.o
|
|
obj-$(CONFIG_BMC150_MAGN_SPI) += bmc150_magn_spi.o
|
|
|
|
obj-$(CONFIG_MAG3110) += mag3110.o
|
|
obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
|
|
obj-$(CONFIG_MMC35240) += mmc35240.o
|
|
|
|
obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o
|
|
st_magn-y := st_magn_core.o
|
|
st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o
|
|
|
|
obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o
|
|
obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o
|
|
|
|
obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o
|
|
obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o
|
|
obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o
|
|
|
|
obj-$(CONFIG_SENSORS_RM3100) += rm3100-core.o
|
|
obj-$(CONFIG_SENSORS_RM3100_I2C) += rm3100-i2c.o
|
|
obj-$(CONFIG_SENSORS_RM3100_SPI) += rm3100-spi.o
|