![Lars-Peter Clausen](/assets/img/avatar_default.png)
The per driver iio_chan_spec arrays are usually shared between multiple device instances. So a single device instance may not modify the iio_chan_spec array since this would also affect the other device instances. To make this restriction explicit mark the per driver iio_chan_spec arrays as const. Conversion was done automatically using the following coccinelle semantic patch: // <smpl> @disable optional_qualifier@ identifier channels; @@ static +const struct iio_chan_spec channels[] = ...; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
290 lines
6.3 KiB
C
290 lines
6.3 KiB
C
/*
|
|
* AD7298 SPI ADC driver
|
|
*
|
|
* Copyright 2011 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
#include "ad7298.h"
|
|
|
|
#define AD7298_V_CHAN(index) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = index, \
|
|
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
|
|
IIO_CHAN_INFO_SCALE_SHARED_BIT, \
|
|
.address = index, \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec ad7298_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.indexed = 1,
|
|
.channel = 0,
|
|
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
|
|
IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
|
|
.address = AD7298_CH_TEMP,
|
|
.scan_index = -1,
|
|
.scan_type = {
|
|
.sign = 's',
|
|
.realbits = 32,
|
|
.storagebits = 32,
|
|
},
|
|
},
|
|
AD7298_V_CHAN(0),
|
|
AD7298_V_CHAN(1),
|
|
AD7298_V_CHAN(2),
|
|
AD7298_V_CHAN(3),
|
|
AD7298_V_CHAN(4),
|
|
AD7298_V_CHAN(5),
|
|
AD7298_V_CHAN(6),
|
|
AD7298_V_CHAN(7),
|
|
IIO_CHAN_SOFT_TIMESTAMP(8),
|
|
};
|
|
|
|
static int ad7298_scan_direct(struct ad7298_state *st, unsigned ch)
|
|
{
|
|
int ret;
|
|
st->tx_buf[0] = cpu_to_be16(AD7298_WRITE | st->ext_ref |
|
|
(AD7298_CH(0) >> ch));
|
|
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return be16_to_cpu(st->rx_buf[0]);
|
|
}
|
|
|
|
static int ad7298_scan_temp(struct ad7298_state *st, int *val)
|
|
{
|
|
int tmp, ret;
|
|
__be16 buf;
|
|
|
|
buf = cpu_to_be16(AD7298_WRITE | AD7298_TSENSE |
|
|
AD7298_TAVG | st->ext_ref);
|
|
|
|
ret = spi_write(st->spi, (u8 *)&buf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
buf = cpu_to_be16(0);
|
|
|
|
ret = spi_write(st->spi, (u8 *)&buf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(101, 1000); /* sleep > 100us */
|
|
|
|
ret = spi_read(st->spi, (u8 *)&buf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmp = be16_to_cpu(buf) & RES_MASK(AD7298_BITS);
|
|
|
|
/*
|
|
* One LSB of the ADC corresponds to 0.25 deg C.
|
|
* The temperature reading is in 12-bit twos complement format
|
|
*/
|
|
|
|
if (tmp & (1 << (AD7298_BITS - 1))) {
|
|
tmp = (4096 - tmp) * 250;
|
|
tmp -= (2 * tmp);
|
|
|
|
} else {
|
|
tmp *= 250; /* temperature in milli degrees Celsius */
|
|
}
|
|
|
|
*val = tmp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7298_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
int ret;
|
|
struct ad7298_state *st = iio_priv(indio_dev);
|
|
unsigned int scale_uv;
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
|
|
ret = -EBUSY;
|
|
} else {
|
|
if (chan->address == AD7298_CH_TEMP)
|
|
ret = ad7298_scan_temp(st, val);
|
|
else
|
|
ret = ad7298_scan_direct(st, chan->address);
|
|
}
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (chan->address != AD7298_CH_TEMP)
|
|
*val = ret & RES_MASK(AD7298_BITS);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_VOLTAGE:
|
|
scale_uv = (st->int_vref_mv * 1000) >> AD7298_BITS;
|
|
*val = scale_uv / 1000;
|
|
*val2 = (scale_uv % 1000) * 1000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_TEMP:
|
|
*val = 1;
|
|
*val2 = 0;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info ad7298_info = {
|
|
.read_raw = &ad7298_read_raw,
|
|
.update_scan_mode = ad7298_update_scan_mode,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int __devinit ad7298_probe(struct spi_device *spi)
|
|
{
|
|
struct ad7298_platform_data *pdata = spi->dev.platform_data;
|
|
struct ad7298_state *st;
|
|
int ret;
|
|
struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
|
|
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto error_put_reg;
|
|
}
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st->spi = spi;
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = ad7298_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(ad7298_channels);
|
|
indio_dev->info = &ad7298_info;
|
|
|
|
/* Setup default message */
|
|
|
|
st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
|
|
st->scan_single_xfer[0].len = 2;
|
|
st->scan_single_xfer[0].cs_change = 1;
|
|
st->scan_single_xfer[1].tx_buf = &st->tx_buf[1];
|
|
st->scan_single_xfer[1].len = 2;
|
|
st->scan_single_xfer[1].cs_change = 1;
|
|
st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
|
|
st->scan_single_xfer[2].len = 2;
|
|
|
|
spi_message_init(&st->scan_single_msg);
|
|
spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg);
|
|
spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
|
|
spi_message_add_tail(&st->scan_single_xfer[2], &st->scan_single_msg);
|
|
|
|
if (pdata && pdata->vref_mv) {
|
|
st->int_vref_mv = pdata->vref_mv;
|
|
st->ext_ref = AD7298_EXTREF;
|
|
} else {
|
|
st->int_vref_mv = AD7298_INTREF_mV;
|
|
}
|
|
|
|
ret = ad7298_register_ring_funcs_and_init(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_cleanup_ring;
|
|
|
|
return 0;
|
|
|
|
error_cleanup_ring:
|
|
ad7298_ring_cleanup(indio_dev);
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
error_put_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_put(st->reg);
|
|
iio_device_free(indio_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit ad7298_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad7298_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
ad7298_ring_cleanup(indio_dev);
|
|
if (!IS_ERR(st->reg)) {
|
|
regulator_disable(st->reg);
|
|
regulator_put(st->reg);
|
|
}
|
|
iio_device_free(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad7298_id[] = {
|
|
{"ad7298", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad7298_id);
|
|
|
|
static struct spi_driver ad7298_driver = {
|
|
.driver = {
|
|
.name = "ad7298",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = ad7298_probe,
|
|
.remove = __devexit_p(ad7298_remove),
|
|
.id_table = ad7298_id,
|
|
};
|
|
module_spi_driver(ad7298_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7298 ADC");
|
|
MODULE_LICENSE("GPL v2");
|