alistair23-linux/drivers/media/dvb-frontends/stv0367.h
Daniel Scheller dbbac11e1d [media] dvb-frontends/stv0367: add Digital Devices compatibility
This - in conjunction with the previous changes - makes it possible to use
the STV0367 DVB-C/T demodulator driver with Digital Devices hardware having
this demodulator soldered on them (namely CineCTv6 bridges and some earlier
DuoFlex CT addon modules).

The changes do the following:

- add a third *_attach function which will make use of a third frontend_ops
  struct which announces both -C and -T support (the same as with DD's own
  driver stv0367dd). This is necessary to support both delivery systems
  on one FE without having to do large conversions to VB2 or the need to
  select either -C or -T mode via modparams and the like. Additionally,
  the frontend_ops point to new "glue" functions which will then call into
  the existing functionality depending on the active delivery system/demod
  state (all used functionality works almost OOTB).
- Demod initialisation has been ported from stv0367dd. DD's driver always
  does a full init of both OFDM and QAM cores, with some additional things.
  The active delivery system is remembered and upon switch, the Demod will
  be reconfigured to work in OFDM or QAM mode (that's what the ddb_setup_XX
  functions are used for). Note that in QAM mode, the DD demods work with
  an IC speed of 58Mhz. It's not very good to perform full reinits upon
  Demod mode changes since in very rare occasions this can lead to the I2C
  interface or the whole Demod to crash, requiring a powercycle, thus the
  flag to perform full reinit is set to disabled.
- A little enum is added for named identifiers of the current Demod state.

Initialisation code/register writes originate from stv0367dd. Permission
to reuse was formally granted by Ralph Metzler <rjkm@metzlerbros.de>.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20 09:27:52 -03:00

75 lines
2 KiB
C

/*
* stv0367.h
*
* Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
*
* Copyright (C) ST Microelectronics.
* Copyright (C) 2010,2011 NetUP Inc.
* Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*/
#ifndef STV0367_H
#define STV0367_H
#include <linux/dvb/frontend.h>
#include "dvb_frontend.h"
#define STV0367_ICSPEED_53125 53125000
#define STV0367_ICSPEED_58000 58000000
struct stv0367_config {
u8 demod_address;
u32 xtal;
u32 if_khz;/*4500*/
int if_iq_mode;
int ts_mode;
int clk_pol;
};
#if IS_REACHABLE(CONFIG_DVB_STV0367)
extern struct
dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c);
extern struct
dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c);
extern struct
dvb_frontend *stv0367ddb_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c);
#else
static inline struct
dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
static inline struct
dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
static inline struct
dvb_frontend *stv0367ddb_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
#endif
#endif