alistair23-linux/drivers/remoteproc/remoteproc_debugfs.c
Ohad Ben-Cohen b5ab5e24e9 remoteproc: maintain a generic child device for each rproc
For each registered rproc, maintain a generic remoteproc device whose
parent is the low level platform-specific device (commonly a pdev, but
it may certainly be any other type of device too).

With this in hand, the resulting device hierarchy might then look like:

omap-rproc.0
 |
 - remoteproc0  <---- new !
    |
    - virtio0
    |
    - virtio1
       |
       - rpmsg0
       |
       - rpmsg1
       |
       - rpmsg2

Where:
- omap-rproc.0 is the low level device that's bound to the
  driver which invokes rproc_register()
- remoteproc0 is the result of this patch, and will be added by the
  remoteproc framework when rproc_register() is invoked
- virtio0 and virtio1 are vdevs that are registered by remoteproc
  when it realizes that they are supported by the firmware
  of the physical remote processor represented by omap-rproc.0
- rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg
  channels, and are registerd by the rpmsg bus when it gets notified
  about their existence

Technically, this patch:
- changes 'struct rproc' to contain this generic remoteproc.x device
- creates a new "remoteproc" type, to which this new generic remoteproc.x
  device belong to.
- adds a super simple enumeration method for the indices of the
  remoteproc.x devices
- updates all dev_* messaging to use the generic remoteproc.x device
  instead of the low level platform-specific device
- updates all dma_* allocations to use the parent of remoteproc.x (where
  the platform-specific memory pools, most commonly CMA, are to be found)

Adding this generic device has several merits:
- we can now add remoteproc runtime PM support simply by hooking onto the
  new "remoteproc" type
- all remoteproc log messages will now carry a common name prefix
  instead of having a platform-specific one
- having a device as part of the rproc struct makes it possible to simplify
  refcounting (see subsequent patch)

Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and
discussing these ideas in one of the remoteproc review threads and
to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out
with the (upcoming) runtime PM support for remoteproc.

Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06 00:53:03 +03:00

173 lines
4.4 KiB
C

/*
* Remote Processor Framework
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2011 Google, Inc.
*
* Ohad Ben-Cohen <ohad@wizery.com>
* Mark Grosen <mgrosen@ti.com>
* Brian Swetland <swetland@google.com>
* Fernando Guzman Lugo <fernando.lugo@ti.com>
* Suman Anna <s-anna@ti.com>
* Robert Tivy <rtivy@ti.com>
* Armando Uribe De Leon <x0095078@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
#include <linux/debugfs.h>
#include <linux/remoteproc.h>
#include <linux/device.h>
/* remoteproc debugfs parent dir */
static struct dentry *rproc_dbg;
/*
* Some remote processors may support dumping trace logs into a shared
* memory buffer. We expose this trace buffer using debugfs, so users
* can easily tell what's going on remotely.
*
* We will most probably improve the rproc tracing facilities later on,
* but this kind of lightweight and simple mechanism is always good to have,
* as it provides very early tracing with little to no dependencies at all.
*/
static ssize_t rproc_trace_read(struct file *filp, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct rproc_mem_entry *trace = filp->private_data;
int len = strnlen(trace->va, trace->len);
return simple_read_from_buffer(userbuf, count, ppos, trace->va, len);
}
static const struct file_operations trace_rproc_ops = {
.read = rproc_trace_read,
.open = simple_open,
.llseek = generic_file_llseek,
};
/*
* A state-to-string lookup table, for exposing a human readable state
* via debugfs. Always keep in sync with enum rproc_state
*/
static const char * const rproc_state_string[] = {
"offline",
"suspended",
"running",
"crashed",
"invalid",
};
/* expose the state of the remote processor via debugfs */
static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct rproc *rproc = filp->private_data;
unsigned int state;
char buf[30];
int i;
state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
i = snprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state],
rproc->state);
return simple_read_from_buffer(userbuf, count, ppos, buf, i);
}
static const struct file_operations rproc_state_ops = {
.read = rproc_state_read,
.open = simple_open,
.llseek = generic_file_llseek,
};
/* expose the name of the remote processor via debugfs */
static ssize_t rproc_name_read(struct file *filp, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct rproc *rproc = filp->private_data;
/* need room for the name, a newline and a terminating null */
char buf[100];
int i;
i = snprintf(buf, sizeof(buf), "%.98s\n", rproc->name);
return simple_read_from_buffer(userbuf, count, ppos, buf, i);
}
static const struct file_operations rproc_name_ops = {
.read = rproc_name_read,
.open = simple_open,
.llseek = generic_file_llseek,
};
void rproc_remove_trace_file(struct dentry *tfile)
{
debugfs_remove(tfile);
}
struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
struct rproc_mem_entry *trace)
{
struct dentry *tfile;
tfile = debugfs_create_file(name, 0400, rproc->dbg_dir,
trace, &trace_rproc_ops);
if (!tfile) {
dev_err(&rproc->dev, "failed to create debugfs trace entry\n");
return NULL;
}
return tfile;
}
void rproc_delete_debug_dir(struct rproc *rproc)
{
if (!rproc->dbg_dir)
return;
debugfs_remove_recursive(rproc->dbg_dir);
}
void rproc_create_debug_dir(struct rproc *rproc)
{
struct device *dev = &rproc->dev;
if (!rproc_dbg)
return;
rproc->dbg_dir = debugfs_create_dir(dev_name(dev), rproc_dbg);
if (!rproc->dbg_dir)
return;
debugfs_create_file("name", 0400, rproc->dbg_dir,
rproc, &rproc_name_ops);
debugfs_create_file("state", 0400, rproc->dbg_dir,
rproc, &rproc_state_ops);
}
void __init rproc_init_debugfs(void)
{
if (debugfs_initialized()) {
rproc_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL);
if (!rproc_dbg)
pr_err("can't create debugfs dir\n");
}
}
void __exit rproc_exit_debugfs(void)
{
if (rproc_dbg)
debugfs_remove(rproc_dbg);
}