alistair23-linux/net/caif/caif_usb.c
Xiongfeng Wang b0d55b5bc7 caif_usb: use strlcpy() instead of strncpy()
gcc-8 reports

net/caif/caif_usb.c: In function 'cfusbl_device_notify':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may
be truncated copying 15 bytes from a string of length 15
[-Wstringop-truncation]

The compiler require that the input param 'len' of strncpy() should be
greater than the length of the src string, so that '\0' is copied as
well. We can just use strlcpy() to avoid this warning.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10 15:06:14 -05:00

202 lines
5.2 KiB
C

/*
* CAIF USB handler
* Copyright (C) ST-Ericsson AB 2011
* Author: Sjur Brendeland
* License terms: GNU General Public License (GPL) version 2
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
#include <linux/etherdevice.h>
#include <net/netns/generic.h>
#include <net/caif/caif_dev.h>
#include <net/caif/caif_layer.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cfcnfg.h>
MODULE_LICENSE("GPL");
#define CFUSB_PAD_DESCR_SZ 1 /* Alignment descriptor length */
#define CFUSB_ALIGNMENT 4 /* Number of bytes to align. */
#define CFUSB_MAX_HEADLEN (CFUSB_PAD_DESCR_SZ + CFUSB_ALIGNMENT-1)
#define STE_USB_VID 0x04cc /* USB Product ID for ST-Ericsson */
#define STE_USB_PID_CAIF 0x230f /* Product id for CAIF Modems */
struct cfusbl {
struct cflayer layer;
u8 tx_eth_hdr[ETH_HLEN];
};
static bool pack_added;
static int cfusbl_receive(struct cflayer *layr, struct cfpkt *pkt)
{
u8 hpad;
/* Remove padding. */
cfpkt_extr_head(pkt, &hpad, 1);
cfpkt_extr_head(pkt, NULL, hpad);
return layr->up->receive(layr->up, pkt);
}
static int cfusbl_transmit(struct cflayer *layr, struct cfpkt *pkt)
{
struct caif_payload_info *info;
u8 hpad;
u8 zeros[CFUSB_ALIGNMENT];
struct sk_buff *skb;
struct cfusbl *usbl = container_of(layr, struct cfusbl, layer);
skb = cfpkt_tonative(pkt);
skb_reset_network_header(skb);
skb->protocol = htons(ETH_P_IP);
info = cfpkt_info(pkt);
hpad = (info->hdr_len + CFUSB_PAD_DESCR_SZ) & (CFUSB_ALIGNMENT - 1);
if (skb_headroom(skb) < ETH_HLEN + CFUSB_PAD_DESCR_SZ + hpad) {
pr_warn("Headroom to small\n");
kfree_skb(skb);
return -EIO;
}
memset(zeros, 0, hpad);
cfpkt_add_head(pkt, zeros, hpad);
cfpkt_add_head(pkt, &hpad, 1);
cfpkt_add_head(pkt, usbl->tx_eth_hdr, sizeof(usbl->tx_eth_hdr));
return layr->dn->transmit(layr->dn, pkt);
}
static void cfusbl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
int phyid)
{
if (layr->up && layr->up->ctrlcmd)
layr->up->ctrlcmd(layr->up, ctrl, layr->id);
}
static struct cflayer *cfusbl_create(int phyid, u8 ethaddr[ETH_ALEN],
u8 braddr[ETH_ALEN])
{
struct cfusbl *this = kmalloc(sizeof(struct cfusbl), GFP_ATOMIC);
if (!this)
return NULL;
caif_assert(offsetof(struct cfusbl, layer) == 0);
memset(&this->layer, 0, sizeof(this->layer));
this->layer.receive = cfusbl_receive;
this->layer.transmit = cfusbl_transmit;
this->layer.ctrlcmd = cfusbl_ctrlcmd;
snprintf(this->layer.name, CAIF_LAYER_NAME_SZ, "usb%d", phyid);
this->layer.id = phyid;
/*
* Construct TX ethernet header:
* 0-5 destination address
* 5-11 source address
* 12-13 protocol type
*/
ether_addr_copy(&this->tx_eth_hdr[ETH_ALEN], braddr);
ether_addr_copy(&this->tx_eth_hdr[ETH_ALEN], ethaddr);
this->tx_eth_hdr[12] = cpu_to_be16(ETH_P_802_EX1) & 0xff;
this->tx_eth_hdr[13] = (cpu_to_be16(ETH_P_802_EX1) >> 8) & 0xff;
pr_debug("caif ethernet TX-header dst:%pM src:%pM type:%02x%02x\n",
this->tx_eth_hdr, this->tx_eth_hdr + ETH_ALEN,
this->tx_eth_hdr[12], this->tx_eth_hdr[13]);
return (struct cflayer *) this;
}
static struct packet_type caif_usb_type __read_mostly = {
.type = cpu_to_be16(ETH_P_802_EX1),
};
static int cfusbl_device_notify(struct notifier_block *me, unsigned long what,
void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct caif_dev_common common;
struct cflayer *layer, *link_support;
struct usbnet *usbnet;
struct usb_device *usbdev;
/* Check whether we have a NCM device, and find its VID/PID. */
if (!(dev->dev.parent && dev->dev.parent->driver &&
strcmp(dev->dev.parent->driver->name, "cdc_ncm") == 0))
return 0;
usbnet = netdev_priv(dev);
usbdev = usbnet->udev;
pr_debug("USB CDC NCM device VID:0x%4x PID:0x%4x\n",
le16_to_cpu(usbdev->descriptor.idVendor),
le16_to_cpu(usbdev->descriptor.idProduct));
/* Check for VID/PID that supports CAIF */
if (!(le16_to_cpu(usbdev->descriptor.idVendor) == STE_USB_VID &&
le16_to_cpu(usbdev->descriptor.idProduct) == STE_USB_PID_CAIF))
return 0;
if (what == NETDEV_UNREGISTER)
module_put(THIS_MODULE);
if (what != NETDEV_REGISTER)
return 0;
__module_get(THIS_MODULE);
memset(&common, 0, sizeof(common));
common.use_frag = false;
common.use_fcs = false;
common.use_stx = false;
common.link_select = CAIF_LINK_HIGH_BANDW;
common.flowctrl = NULL;
link_support = cfusbl_create(dev->ifindex, dev->dev_addr,
dev->broadcast);
if (!link_support)
return -ENOMEM;
if (dev->num_tx_queues > 1)
pr_warn("USB device uses more than one tx queue\n");
caif_enroll_dev(dev, &common, link_support, CFUSB_MAX_HEADLEN,
&layer, &caif_usb_type.func);
if (!pack_added)
dev_add_pack(&caif_usb_type);
pack_added = true;
strlcpy(layer->name, dev->name, sizeof(layer->name));
return 0;
}
static struct notifier_block caif_device_notifier = {
.notifier_call = cfusbl_device_notify,
.priority = 0,
};
static int __init cfusbl_init(void)
{
return register_netdevice_notifier(&caif_device_notifier);
}
static void __exit cfusbl_exit(void)
{
unregister_netdevice_notifier(&caif_device_notifier);
dev_remove_pack(&caif_usb_type);
}
module_init(cfusbl_init);
module_exit(cfusbl_exit);