![Robert Foss](/assets/img/avatar_default.png)
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2462 lines
68 KiB
C
2462 lines
68 KiB
C
/*
|
|
* Copyright (c) 2006-2009 Red Hat Inc.
|
|
* Copyright (c) 2006-2008 Intel Corporation
|
|
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
|
|
*
|
|
* DRM framebuffer helper functions
|
|
*
|
|
* Permission to use, copy, modify, distribute, and sell this software and its
|
|
* documentation for any purpose is hereby granted without fee, provided that
|
|
* the above copyright notice appear in all copies and that both that copyright
|
|
* notice and this permission notice appear in supporting documentation, and
|
|
* that the name of the copyright holders not be used in advertising or
|
|
* publicity pertaining to distribution of the software without specific,
|
|
* written prior permission. The copyright holders make no representations
|
|
* about the suitability of this software for any purpose. It is provided "as
|
|
* is" without express or implied warranty.
|
|
*
|
|
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
|
|
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
|
|
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
|
|
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
|
|
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
|
|
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
|
|
* OF THIS SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Dave Airlie <airlied@linux.ie>
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
*/
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/console.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
|
|
#include "drm_crtc_helper_internal.h"
|
|
|
|
static bool drm_fbdev_emulation = true;
|
|
module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
|
|
MODULE_PARM_DESC(fbdev_emulation,
|
|
"Enable legacy fbdev emulation [default=true]");
|
|
|
|
static int drm_fbdev_overalloc = CONFIG_DRM_FBDEV_OVERALLOC;
|
|
module_param(drm_fbdev_overalloc, int, 0444);
|
|
MODULE_PARM_DESC(drm_fbdev_overalloc,
|
|
"Overallocation of the fbdev buffer (%) [default="
|
|
__MODULE_STRING(CONFIG_DRM_FBDEV_OVERALLOC) "]");
|
|
|
|
static LIST_HEAD(kernel_fb_helper_list);
|
|
static DEFINE_MUTEX(kernel_fb_helper_lock);
|
|
|
|
/**
|
|
* DOC: fbdev helpers
|
|
*
|
|
* The fb helper functions are useful to provide an fbdev on top of a drm kernel
|
|
* mode setting driver. They can be used mostly independently from the crtc
|
|
* helper functions used by many drivers to implement the kernel mode setting
|
|
* interfaces.
|
|
*
|
|
* Initialization is done as a four-step process with drm_fb_helper_prepare(),
|
|
* drm_fb_helper_init(), drm_fb_helper_single_add_all_connectors() and
|
|
* drm_fb_helper_initial_config(). Drivers with fancier requirements than the
|
|
* default behaviour can override the third step with their own code.
|
|
* Teardown is done with drm_fb_helper_fini() after the fbdev device is
|
|
* unregisters using drm_fb_helper_unregister_fbi().
|
|
*
|
|
* At runtime drivers should restore the fbdev console by calling
|
|
* drm_fb_helper_restore_fbdev_mode_unlocked() from their &drm_driver.lastclose
|
|
* callback. They should also notify the fb helper code from updates to the
|
|
* output configuration by calling drm_fb_helper_hotplug_event(). For easier
|
|
* integration with the output polling code in drm_crtc_helper.c the modeset
|
|
* code provides a &drm_mode_config_funcs.output_poll_changed callback.
|
|
*
|
|
* All other functions exported by the fb helper library can be used to
|
|
* implement the fbdev driver interface by the driver.
|
|
*
|
|
* It is possible, though perhaps somewhat tricky, to implement race-free
|
|
* hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
|
|
* helper must be called first to initialize the minimum required to make
|
|
* hotplug detection work. Drivers also need to make sure to properly set up
|
|
* the &drm_mode_config.funcs member. After calling drm_kms_helper_poll_init()
|
|
* it is safe to enable interrupts and start processing hotplug events. At the
|
|
* same time, drivers should initialize all modeset objects such as CRTCs,
|
|
* encoders and connectors. To finish up the fbdev helper initialization, the
|
|
* drm_fb_helper_init() function is called. To probe for all attached displays
|
|
* and set up an initial configuration using the detected hardware, drivers
|
|
* should call drm_fb_helper_single_add_all_connectors() followed by
|
|
* drm_fb_helper_initial_config().
|
|
*
|
|
* If &drm_framebuffer_funcs.dirty is set, the
|
|
* drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions will
|
|
* accumulate changes and schedule &drm_fb_helper.dirty_work to run right
|
|
* away. This worker then calls the dirty() function ensuring that it will
|
|
* always run in process context since the fb_*() function could be running in
|
|
* atomic context. If drm_fb_helper_deferred_io() is used as the deferred_io
|
|
* callback it will also schedule dirty_work with the damage collected from the
|
|
* mmap page writes.
|
|
*/
|
|
|
|
#define drm_fb_helper_for_each_connector(fbh, i__) \
|
|
for (({ lockdep_assert_held(&(fbh)->dev->mode_config.mutex); }), \
|
|
i__ = 0; i__ < (fbh)->connector_count; i__++)
|
|
|
|
int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_fb_helper_connector *fb_conn;
|
|
struct drm_fb_helper_connector **temp;
|
|
unsigned int count;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return 0;
|
|
|
|
WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
|
|
|
|
count = fb_helper->connector_count + 1;
|
|
|
|
if (count > fb_helper->connector_info_alloc_count) {
|
|
size_t size = count * sizeof(fb_conn);
|
|
|
|
temp = krealloc(fb_helper->connector_info, size, GFP_KERNEL);
|
|
if (!temp)
|
|
return -ENOMEM;
|
|
|
|
fb_helper->connector_info_alloc_count = count;
|
|
fb_helper->connector_info = temp;
|
|
}
|
|
|
|
fb_conn = kzalloc(sizeof(*fb_conn), GFP_KERNEL);
|
|
if (!fb_conn)
|
|
return -ENOMEM;
|
|
|
|
drm_connector_get(connector);
|
|
fb_conn->connector = connector;
|
|
fb_helper->connector_info[fb_helper->connector_count++] = fb_conn;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_add_one_connector);
|
|
|
|
/**
|
|
* drm_fb_helper_single_add_all_connectors() - add all connectors to fbdev
|
|
* emulation helper
|
|
* @fb_helper: fbdev initialized with drm_fb_helper_init
|
|
*
|
|
* This functions adds all the available connectors for use with the given
|
|
* fb_helper. This is a separate step to allow drivers to freely assign
|
|
* connectors to the fbdev, e.g. if some are reserved for special purposes or
|
|
* not adequate to be used for the fbcon.
|
|
*
|
|
* This function is protected against concurrent connector hotadds/removals
|
|
* using drm_fb_helper_add_one_connector() and
|
|
* drm_fb_helper_remove_one_connector().
|
|
*/
|
|
int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_list_iter conn_iter;
|
|
int i, ret = 0;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return 0;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
drm_connector_list_iter_begin(dev, &conn_iter);
|
|
drm_for_each_connector_iter(connector, &conn_iter) {
|
|
ret = drm_fb_helper_add_one_connector(fb_helper, connector);
|
|
|
|
if (ret)
|
|
goto fail;
|
|
}
|
|
goto out;
|
|
|
|
fail:
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
struct drm_fb_helper_connector *fb_helper_connector =
|
|
fb_helper->connector_info[i];
|
|
|
|
drm_connector_put(fb_helper_connector->connector);
|
|
|
|
kfree(fb_helper_connector);
|
|
fb_helper->connector_info[i] = NULL;
|
|
}
|
|
fb_helper->connector_count = 0;
|
|
out:
|
|
drm_connector_list_iter_end(&conn_iter);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
|
|
|
|
int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_fb_helper_connector *fb_helper_connector;
|
|
int i, j;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return 0;
|
|
|
|
WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
|
|
|
|
for (i = 0; i < fb_helper->connector_count; i++) {
|
|
if (fb_helper->connector_info[i]->connector == connector)
|
|
break;
|
|
}
|
|
|
|
if (i == fb_helper->connector_count)
|
|
return -EINVAL;
|
|
fb_helper_connector = fb_helper->connector_info[i];
|
|
drm_connector_put(fb_helper_connector->connector);
|
|
|
|
for (j = i + 1; j < fb_helper->connector_count; j++)
|
|
fb_helper->connector_info[j - 1] = fb_helper->connector_info[j];
|
|
|
|
fb_helper->connector_count--;
|
|
kfree(fb_helper_connector);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_remove_one_connector);
|
|
|
|
static void drm_fb_helper_save_lut_atomic(struct drm_crtc *crtc, struct drm_fb_helper *helper)
|
|
{
|
|
uint16_t *r_base, *g_base, *b_base;
|
|
int i;
|
|
|
|
if (helper->funcs->gamma_get == NULL)
|
|
return;
|
|
|
|
r_base = crtc->gamma_store;
|
|
g_base = r_base + crtc->gamma_size;
|
|
b_base = g_base + crtc->gamma_size;
|
|
|
|
for (i = 0; i < crtc->gamma_size; i++)
|
|
helper->funcs->gamma_get(crtc, &r_base[i], &g_base[i], &b_base[i], i);
|
|
}
|
|
|
|
static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
|
|
{
|
|
uint16_t *r_base, *g_base, *b_base;
|
|
|
|
if (crtc->funcs->gamma_set == NULL)
|
|
return;
|
|
|
|
r_base = crtc->gamma_store;
|
|
g_base = r_base + crtc->gamma_size;
|
|
b_base = g_base + crtc->gamma_size;
|
|
|
|
crtc->funcs->gamma_set(crtc, r_base, g_base, b_base,
|
|
crtc->gamma_size, NULL);
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_debug_enter - implementation for &fb_ops.fb_debug_enter
|
|
* @info: fbdev registered by the helper
|
|
*/
|
|
int drm_fb_helper_debug_enter(struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *helper = info->par;
|
|
const struct drm_crtc_helper_funcs *funcs;
|
|
int i;
|
|
|
|
list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
|
|
for (i = 0; i < helper->crtc_count; i++) {
|
|
struct drm_mode_set *mode_set =
|
|
&helper->crtc_info[i].mode_set;
|
|
|
|
if (!mode_set->crtc->enabled)
|
|
continue;
|
|
|
|
funcs = mode_set->crtc->helper_private;
|
|
if (funcs->mode_set_base_atomic == NULL)
|
|
continue;
|
|
|
|
if (drm_drv_uses_atomic_modeset(mode_set->crtc->dev))
|
|
continue;
|
|
|
|
drm_fb_helper_save_lut_atomic(mode_set->crtc, helper);
|
|
funcs->mode_set_base_atomic(mode_set->crtc,
|
|
mode_set->fb,
|
|
mode_set->x,
|
|
mode_set->y,
|
|
ENTER_ATOMIC_MODE_SET);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_debug_enter);
|
|
|
|
/* Find the real fb for a given fb helper CRTC */
|
|
static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_crtc *c;
|
|
|
|
drm_for_each_crtc(c, dev) {
|
|
if (crtc->base.id == c->base.id)
|
|
return c->primary->fb;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_debug_leave - implementation for &fb_ops.fb_debug_leave
|
|
* @info: fbdev registered by the helper
|
|
*/
|
|
int drm_fb_helper_debug_leave(struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *helper = info->par;
|
|
struct drm_crtc *crtc;
|
|
const struct drm_crtc_helper_funcs *funcs;
|
|
struct drm_framebuffer *fb;
|
|
int i;
|
|
|
|
for (i = 0; i < helper->crtc_count; i++) {
|
|
struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
|
|
|
|
crtc = mode_set->crtc;
|
|
funcs = crtc->helper_private;
|
|
fb = drm_mode_config_fb(crtc);
|
|
|
|
if (!crtc->enabled)
|
|
continue;
|
|
|
|
if (!fb) {
|
|
DRM_ERROR("no fb to restore??\n");
|
|
continue;
|
|
}
|
|
|
|
if (funcs->mode_set_base_atomic == NULL)
|
|
continue;
|
|
|
|
if (drm_drv_uses_atomic_modeset(crtc->dev))
|
|
continue;
|
|
|
|
drm_fb_helper_restore_lut_atomic(mode_set->crtc);
|
|
funcs->mode_set_base_atomic(mode_set->crtc, fb, crtc->x,
|
|
crtc->y, LEAVE_ATOMIC_MODE_SET);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_debug_leave);
|
|
|
|
static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_plane *plane;
|
|
struct drm_atomic_state *state;
|
|
int i, ret;
|
|
unsigned int plane_mask;
|
|
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->acquire_ctx = dev->mode_config.acquire_ctx;
|
|
retry:
|
|
plane_mask = 0;
|
|
drm_for_each_plane(plane, dev) {
|
|
struct drm_plane_state *plane_state;
|
|
|
|
plane_state = drm_atomic_get_plane_state(state, plane);
|
|
if (IS_ERR(plane_state)) {
|
|
ret = PTR_ERR(plane_state);
|
|
goto fail;
|
|
}
|
|
|
|
plane_state->rotation = DRM_MODE_ROTATE_0;
|
|
|
|
plane->old_fb = plane->fb;
|
|
plane_mask |= 1 << drm_plane_index(plane);
|
|
|
|
/* disable non-primary: */
|
|
if (plane->type == DRM_PLANE_TYPE_PRIMARY)
|
|
continue;
|
|
|
|
ret = __drm_atomic_helper_disable_plane(plane, plane_state);
|
|
if (ret != 0)
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
|
|
|
|
ret = __drm_atomic_helper_set_config(mode_set, state);
|
|
if (ret != 0)
|
|
goto fail;
|
|
}
|
|
|
|
ret = drm_atomic_commit(state);
|
|
|
|
fail:
|
|
drm_atomic_clean_old_fb(dev, plane_mask, ret);
|
|
|
|
if (ret == -EDEADLK)
|
|
goto backoff;
|
|
|
|
drm_atomic_state_put(state);
|
|
return ret;
|
|
|
|
backoff:
|
|
drm_atomic_state_clear(state);
|
|
drm_atomic_legacy_backoff(state);
|
|
|
|
goto retry;
|
|
}
|
|
|
|
static int restore_fbdev_mode_legacy(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_plane *plane;
|
|
int i;
|
|
|
|
drm_for_each_plane(plane, dev) {
|
|
if (plane->type != DRM_PLANE_TYPE_PRIMARY)
|
|
drm_plane_force_disable(plane);
|
|
|
|
if (plane->rotation_property)
|
|
drm_mode_plane_set_obj_prop(plane,
|
|
plane->rotation_property,
|
|
DRM_MODE_ROTATE_0);
|
|
}
|
|
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
|
|
struct drm_crtc *crtc = mode_set->crtc;
|
|
int ret;
|
|
|
|
if (crtc->funcs->cursor_set2) {
|
|
ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
|
|
if (ret)
|
|
return ret;
|
|
} else if (crtc->funcs->cursor_set) {
|
|
ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = drm_mode_set_config_internal(mode_set);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
|
|
drm_warn_on_modeset_not_all_locked(dev);
|
|
|
|
if (drm_drv_uses_atomic_modeset(dev))
|
|
return restore_fbdev_mode_atomic(fb_helper);
|
|
else
|
|
return restore_fbdev_mode_legacy(fb_helper);
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
|
|
* @fb_helper: fbcon to restore
|
|
*
|
|
* This should be called from driver's drm &drm_driver.lastclose callback
|
|
* when implementing an fbcon on top of kms using this helper. This ensures that
|
|
* the user isn't greeted with a black screen when e.g. X dies.
|
|
*
|
|
* RETURNS:
|
|
* Zero if everything went ok, negative error code otherwise.
|
|
*/
|
|
int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
bool do_delayed;
|
|
int ret;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return -ENODEV;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
ret = restore_fbdev_mode(fb_helper);
|
|
|
|
do_delayed = fb_helper->delayed_hotplug;
|
|
if (do_delayed)
|
|
fb_helper->delayed_hotplug = false;
|
|
drm_modeset_unlock_all(dev);
|
|
|
|
if (do_delayed)
|
|
drm_fb_helper_hotplug_event(fb_helper);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode_unlocked);
|
|
|
|
static bool drm_fb_helper_is_bound(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_crtc *crtc;
|
|
int bound = 0, crtcs_bound = 0;
|
|
|
|
/*
|
|
* Sometimes user space wants everything disabled, so don't steal the
|
|
* display if there's a master.
|
|
*/
|
|
if (READ_ONCE(dev->master))
|
|
return false;
|
|
|
|
drm_for_each_crtc(crtc, dev) {
|
|
if (crtc->primary->fb)
|
|
crtcs_bound++;
|
|
if (crtc->primary->fb == fb_helper->fb)
|
|
bound++;
|
|
}
|
|
|
|
if (bound < crtcs_bound)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
#ifdef CONFIG_MAGIC_SYSRQ
|
|
/*
|
|
* restore fbcon display for all kms driver's using this helper, used for sysrq
|
|
* and panic handling.
|
|
*/
|
|
static bool drm_fb_helper_force_kernel_mode(void)
|
|
{
|
|
bool ret, error = false;
|
|
struct drm_fb_helper *helper;
|
|
|
|
if (list_empty(&kernel_fb_helper_list))
|
|
return false;
|
|
|
|
list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
|
|
struct drm_device *dev = helper->dev;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
continue;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
ret = restore_fbdev_mode(helper);
|
|
if (ret)
|
|
error = true;
|
|
drm_modeset_unlock_all(dev);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
|
|
{
|
|
bool ret;
|
|
|
|
ret = drm_fb_helper_force_kernel_mode();
|
|
if (ret == true)
|
|
DRM_ERROR("Failed to restore crtc configuration\n");
|
|
}
|
|
static DECLARE_WORK(drm_fb_helper_restore_work, drm_fb_helper_restore_work_fn);
|
|
|
|
static void drm_fb_helper_sysrq(int dummy1)
|
|
{
|
|
schedule_work(&drm_fb_helper_restore_work);
|
|
}
|
|
|
|
static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
|
|
.handler = drm_fb_helper_sysrq,
|
|
.help_msg = "force-fb(V)",
|
|
.action_msg = "Restore framebuffer console",
|
|
};
|
|
#else
|
|
static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
|
|
#endif
|
|
|
|
static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_crtc *crtc;
|
|
struct drm_connector *connector;
|
|
int i, j;
|
|
|
|
/*
|
|
* For each CRTC in this fb, turn the connectors on/off.
|
|
*/
|
|
drm_modeset_lock_all(dev);
|
|
if (!drm_fb_helper_is_bound(fb_helper)) {
|
|
drm_modeset_unlock_all(dev);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
crtc = fb_helper->crtc_info[i].mode_set.crtc;
|
|
|
|
if (!crtc->enabled)
|
|
continue;
|
|
|
|
/* Walk the connectors & encoders on this fb turning them on/off */
|
|
drm_fb_helper_for_each_connector(fb_helper, j) {
|
|
connector = fb_helper->connector_info[j]->connector;
|
|
connector->funcs->dpms(connector, dpms_mode);
|
|
drm_object_property_set_value(&connector->base,
|
|
dev->mode_config.dpms_property, dpms_mode);
|
|
}
|
|
}
|
|
drm_modeset_unlock_all(dev);
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_blank - implementation for &fb_ops.fb_blank
|
|
* @blank: desired blanking state
|
|
* @info: fbdev registered by the helper
|
|
*/
|
|
int drm_fb_helper_blank(int blank, struct fb_info *info)
|
|
{
|
|
if (oops_in_progress)
|
|
return -EBUSY;
|
|
|
|
switch (blank) {
|
|
/* Display: On; HSync: On, VSync: On */
|
|
case FB_BLANK_UNBLANK:
|
|
drm_fb_helper_dpms(info, DRM_MODE_DPMS_ON);
|
|
break;
|
|
/* Display: Off; HSync: On, VSync: On */
|
|
case FB_BLANK_NORMAL:
|
|
drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
|
|
break;
|
|
/* Display: Off; HSync: Off, VSync: On */
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
|
|
break;
|
|
/* Display: Off; HSync: On, VSync: Off */
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
drm_fb_helper_dpms(info, DRM_MODE_DPMS_SUSPEND);
|
|
break;
|
|
/* Display: Off; HSync: Off, VSync: Off */
|
|
case FB_BLANK_POWERDOWN:
|
|
drm_fb_helper_dpms(info, DRM_MODE_DPMS_OFF);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_blank);
|
|
|
|
static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper,
|
|
struct drm_mode_set *modeset)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < modeset->num_connectors; i++) {
|
|
drm_connector_put(modeset->connectors[i]);
|
|
modeset->connectors[i] = NULL;
|
|
}
|
|
modeset->num_connectors = 0;
|
|
|
|
drm_mode_destroy(helper->dev, modeset->mode);
|
|
modeset->mode = NULL;
|
|
|
|
/* FIXME should hold a ref? */
|
|
modeset->fb = NULL;
|
|
}
|
|
|
|
static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < helper->connector_count; i++) {
|
|
drm_connector_put(helper->connector_info[i]->connector);
|
|
kfree(helper->connector_info[i]);
|
|
}
|
|
kfree(helper->connector_info);
|
|
|
|
for (i = 0; i < helper->crtc_count; i++) {
|
|
struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set;
|
|
|
|
drm_fb_helper_modeset_release(helper, modeset);
|
|
kfree(modeset->connectors);
|
|
}
|
|
kfree(helper->crtc_info);
|
|
}
|
|
|
|
static void drm_fb_helper_resume_worker(struct work_struct *work)
|
|
{
|
|
struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
|
|
resume_work);
|
|
|
|
console_lock();
|
|
fb_set_suspend(helper->fbdev, 0);
|
|
console_unlock();
|
|
}
|
|
|
|
static void drm_fb_helper_dirty_work(struct work_struct *work)
|
|
{
|
|
struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
|
|
dirty_work);
|
|
struct drm_clip_rect *clip = &helper->dirty_clip;
|
|
struct drm_clip_rect clip_copy;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&helper->dirty_lock, flags);
|
|
clip_copy = *clip;
|
|
clip->x1 = clip->y1 = ~0;
|
|
clip->x2 = clip->y2 = 0;
|
|
spin_unlock_irqrestore(&helper->dirty_lock, flags);
|
|
|
|
/* call dirty callback only when it has been really touched */
|
|
if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2)
|
|
helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1);
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_prepare - setup a drm_fb_helper structure
|
|
* @dev: DRM device
|
|
* @helper: driver-allocated fbdev helper structure to set up
|
|
* @funcs: pointer to structure of functions associate with this helper
|
|
*
|
|
* Sets up the bare minimum to make the framebuffer helper usable. This is
|
|
* useful to implement race-free initialization of the polling helpers.
|
|
*/
|
|
void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
|
|
const struct drm_fb_helper_funcs *funcs)
|
|
{
|
|
INIT_LIST_HEAD(&helper->kernel_fb_list);
|
|
spin_lock_init(&helper->dirty_lock);
|
|
INIT_WORK(&helper->resume_work, drm_fb_helper_resume_worker);
|
|
INIT_WORK(&helper->dirty_work, drm_fb_helper_dirty_work);
|
|
helper->dirty_clip.x1 = helper->dirty_clip.y1 = ~0;
|
|
helper->funcs = funcs;
|
|
helper->dev = dev;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_prepare);
|
|
|
|
/**
|
|
* drm_fb_helper_init - initialize a &struct drm_fb_helper
|
|
* @dev: drm device
|
|
* @fb_helper: driver-allocated fbdev helper structure to initialize
|
|
* @max_conn_count: max connector count
|
|
*
|
|
* This allocates the structures for the fbdev helper with the given limits.
|
|
* Note that this won't yet touch the hardware (through the driver interfaces)
|
|
* nor register the fbdev. This is only done in drm_fb_helper_initial_config()
|
|
* to allow driver writes more control over the exact init sequence.
|
|
*
|
|
* Drivers must call drm_fb_helper_prepare() before calling this function.
|
|
*
|
|
* RETURNS:
|
|
* Zero if everything went ok, nonzero otherwise.
|
|
*/
|
|
int drm_fb_helper_init(struct drm_device *dev,
|
|
struct drm_fb_helper *fb_helper,
|
|
int max_conn_count)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
struct drm_mode_config *config = &dev->mode_config;
|
|
int i;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return 0;
|
|
|
|
if (!max_conn_count)
|
|
return -EINVAL;
|
|
|
|
fb_helper->crtc_info = kcalloc(config->num_crtc, sizeof(struct drm_fb_helper_crtc), GFP_KERNEL);
|
|
if (!fb_helper->crtc_info)
|
|
return -ENOMEM;
|
|
|
|
fb_helper->crtc_count = config->num_crtc;
|
|
fb_helper->connector_info = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_fb_helper_connector *), GFP_KERNEL);
|
|
if (!fb_helper->connector_info) {
|
|
kfree(fb_helper->crtc_info);
|
|
return -ENOMEM;
|
|
}
|
|
fb_helper->connector_info_alloc_count = dev->mode_config.num_connector;
|
|
fb_helper->connector_count = 0;
|
|
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
fb_helper->crtc_info[i].mode_set.connectors =
|
|
kcalloc(max_conn_count,
|
|
sizeof(struct drm_connector *),
|
|
GFP_KERNEL);
|
|
|
|
if (!fb_helper->crtc_info[i].mode_set.connectors)
|
|
goto out_free;
|
|
fb_helper->crtc_info[i].mode_set.num_connectors = 0;
|
|
}
|
|
|
|
i = 0;
|
|
drm_for_each_crtc(crtc, dev) {
|
|
fb_helper->crtc_info[i].mode_set.crtc = crtc;
|
|
i++;
|
|
}
|
|
|
|
return 0;
|
|
out_free:
|
|
drm_fb_helper_crtc_free(fb_helper);
|
|
return -ENOMEM;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_init);
|
|
|
|
/**
|
|
* drm_fb_helper_alloc_fbi - allocate fb_info and some of its members
|
|
* @fb_helper: driver-allocated fbdev helper
|
|
*
|
|
* A helper to alloc fb_info and the members cmap and apertures. Called
|
|
* by the driver within the fb_probe fb_helper callback function. Drivers do not
|
|
* need to release the allocated fb_info structure themselves, this is
|
|
* automatically done when calling drm_fb_helper_fini().
|
|
*
|
|
* RETURNS:
|
|
* fb_info pointer if things went okay, pointer containing error code
|
|
* otherwise
|
|
*/
|
|
struct fb_info *drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct device *dev = fb_helper->dev->dev;
|
|
struct fb_info *info;
|
|
int ret;
|
|
|
|
info = framebuffer_alloc(0, dev);
|
|
if (!info)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
ret = fb_alloc_cmap(&info->cmap, 256, 0);
|
|
if (ret)
|
|
goto err_release;
|
|
|
|
info->apertures = alloc_apertures(1);
|
|
if (!info->apertures) {
|
|
ret = -ENOMEM;
|
|
goto err_free_cmap;
|
|
}
|
|
|
|
fb_helper->fbdev = info;
|
|
|
|
return info;
|
|
|
|
err_free_cmap:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err_release:
|
|
framebuffer_release(info);
|
|
return ERR_PTR(ret);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_alloc_fbi);
|
|
|
|
/**
|
|
* drm_fb_helper_unregister_fbi - unregister fb_info framebuffer device
|
|
* @fb_helper: driver-allocated fbdev helper
|
|
*
|
|
* A wrapper around unregister_framebuffer, to release the fb_info
|
|
* framebuffer device. This must be called before releasing all resources for
|
|
* @fb_helper by calling drm_fb_helper_fini().
|
|
*/
|
|
void drm_fb_helper_unregister_fbi(struct drm_fb_helper *fb_helper)
|
|
{
|
|
if (fb_helper && fb_helper->fbdev)
|
|
unregister_framebuffer(fb_helper->fbdev);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_unregister_fbi);
|
|
|
|
/**
|
|
* drm_fb_helper_fini - finialize a &struct drm_fb_helper
|
|
* @fb_helper: driver-allocated fbdev helper
|
|
*
|
|
* This cleans up all remaining resources associated with @fb_helper. Must be
|
|
* called after drm_fb_helper_unlink_fbi() was called.
|
|
*/
|
|
void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct fb_info *info;
|
|
|
|
if (!drm_fbdev_emulation || !fb_helper)
|
|
return;
|
|
|
|
info = fb_helper->fbdev;
|
|
if (info) {
|
|
if (info->cmap.len)
|
|
fb_dealloc_cmap(&info->cmap);
|
|
framebuffer_release(info);
|
|
}
|
|
fb_helper->fbdev = NULL;
|
|
|
|
cancel_work_sync(&fb_helper->resume_work);
|
|
cancel_work_sync(&fb_helper->dirty_work);
|
|
|
|
mutex_lock(&kernel_fb_helper_lock);
|
|
if (!list_empty(&fb_helper->kernel_fb_list)) {
|
|
list_del(&fb_helper->kernel_fb_list);
|
|
if (list_empty(&kernel_fb_helper_list))
|
|
unregister_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
|
|
}
|
|
mutex_unlock(&kernel_fb_helper_lock);
|
|
|
|
drm_fb_helper_crtc_free(fb_helper);
|
|
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_fini);
|
|
|
|
/**
|
|
* drm_fb_helper_unlink_fbi - wrapper around unlink_framebuffer
|
|
* @fb_helper: driver-allocated fbdev helper
|
|
*
|
|
* A wrapper around unlink_framebuffer implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
|
|
{
|
|
if (fb_helper && fb_helper->fbdev)
|
|
unlink_framebuffer(fb_helper->fbdev);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_unlink_fbi);
|
|
|
|
static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
|
|
u32 width, u32 height)
|
|
{
|
|
struct drm_fb_helper *helper = info->par;
|
|
struct drm_clip_rect *clip = &helper->dirty_clip;
|
|
unsigned long flags;
|
|
|
|
if (!helper->fb->funcs->dirty)
|
|
return;
|
|
|
|
spin_lock_irqsave(&helper->dirty_lock, flags);
|
|
clip->x1 = min_t(u32, clip->x1, x);
|
|
clip->y1 = min_t(u32, clip->y1, y);
|
|
clip->x2 = max_t(u32, clip->x2, x + width);
|
|
clip->y2 = max_t(u32, clip->y2, y + height);
|
|
spin_unlock_irqrestore(&helper->dirty_lock, flags);
|
|
|
|
schedule_work(&helper->dirty_work);
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_deferred_io() - fbdev deferred_io callback function
|
|
* @info: fb_info struct pointer
|
|
* @pagelist: list of dirty mmap framebuffer pages
|
|
*
|
|
* This function is used as the &fb_deferred_io.deferred_io
|
|
* callback function for flushing the fbdev mmap writes.
|
|
*/
|
|
void drm_fb_helper_deferred_io(struct fb_info *info,
|
|
struct list_head *pagelist)
|
|
{
|
|
unsigned long start, end, min, max;
|
|
struct page *page;
|
|
u32 y1, y2;
|
|
|
|
min = ULONG_MAX;
|
|
max = 0;
|
|
list_for_each_entry(page, pagelist, lru) {
|
|
start = page->index << PAGE_SHIFT;
|
|
end = start + PAGE_SIZE - 1;
|
|
min = min(min, start);
|
|
max = max(max, end);
|
|
}
|
|
|
|
if (min < max) {
|
|
y1 = min / info->fix.line_length;
|
|
y2 = min_t(u32, DIV_ROUND_UP(max, info->fix.line_length),
|
|
info->var.yres);
|
|
drm_fb_helper_dirty(info, 0, y1, info->var.xres, y2 - y1);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_deferred_io);
|
|
|
|
/**
|
|
* drm_fb_helper_sys_read - wrapper around fb_sys_read
|
|
* @info: fb_info struct pointer
|
|
* @buf: userspace buffer to read from framebuffer memory
|
|
* @count: number of bytes to read from framebuffer memory
|
|
* @ppos: read offset within framebuffer memory
|
|
*
|
|
* A wrapper around fb_sys_read implemented by fbdev core
|
|
*/
|
|
ssize_t drm_fb_helper_sys_read(struct fb_info *info, char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
return fb_sys_read(info, buf, count, ppos);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_sys_read);
|
|
|
|
/**
|
|
* drm_fb_helper_sys_write - wrapper around fb_sys_write
|
|
* @info: fb_info struct pointer
|
|
* @buf: userspace buffer to write to framebuffer memory
|
|
* @count: number of bytes to write to framebuffer memory
|
|
* @ppos: write offset within framebuffer memory
|
|
*
|
|
* A wrapper around fb_sys_write implemented by fbdev core
|
|
*/
|
|
ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
ssize_t ret;
|
|
|
|
ret = fb_sys_write(info, buf, count, ppos);
|
|
if (ret > 0)
|
|
drm_fb_helper_dirty(info, 0, 0, info->var.xres,
|
|
info->var.yres);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_sys_write);
|
|
|
|
/**
|
|
* drm_fb_helper_sys_fillrect - wrapper around sys_fillrect
|
|
* @info: fbdev registered by the helper
|
|
* @rect: info about rectangle to fill
|
|
*
|
|
* A wrapper around sys_fillrect implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_sys_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *rect)
|
|
{
|
|
sys_fillrect(info, rect);
|
|
drm_fb_helper_dirty(info, rect->dx, rect->dy,
|
|
rect->width, rect->height);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_sys_fillrect);
|
|
|
|
/**
|
|
* drm_fb_helper_sys_copyarea - wrapper around sys_copyarea
|
|
* @info: fbdev registered by the helper
|
|
* @area: info about area to copy
|
|
*
|
|
* A wrapper around sys_copyarea implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_sys_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *area)
|
|
{
|
|
sys_copyarea(info, area);
|
|
drm_fb_helper_dirty(info, area->dx, area->dy,
|
|
area->width, area->height);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_sys_copyarea);
|
|
|
|
/**
|
|
* drm_fb_helper_sys_imageblit - wrapper around sys_imageblit
|
|
* @info: fbdev registered by the helper
|
|
* @image: info about image to blit
|
|
*
|
|
* A wrapper around sys_imageblit implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_sys_imageblit(struct fb_info *info,
|
|
const struct fb_image *image)
|
|
{
|
|
sys_imageblit(info, image);
|
|
drm_fb_helper_dirty(info, image->dx, image->dy,
|
|
image->width, image->height);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_sys_imageblit);
|
|
|
|
/**
|
|
* drm_fb_helper_cfb_fillrect - wrapper around cfb_fillrect
|
|
* @info: fbdev registered by the helper
|
|
* @rect: info about rectangle to fill
|
|
*
|
|
* A wrapper around cfb_imageblit implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_cfb_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *rect)
|
|
{
|
|
cfb_fillrect(info, rect);
|
|
drm_fb_helper_dirty(info, rect->dx, rect->dy,
|
|
rect->width, rect->height);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_cfb_fillrect);
|
|
|
|
/**
|
|
* drm_fb_helper_cfb_copyarea - wrapper around cfb_copyarea
|
|
* @info: fbdev registered by the helper
|
|
* @area: info about area to copy
|
|
*
|
|
* A wrapper around cfb_copyarea implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_cfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *area)
|
|
{
|
|
cfb_copyarea(info, area);
|
|
drm_fb_helper_dirty(info, area->dx, area->dy,
|
|
area->width, area->height);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_cfb_copyarea);
|
|
|
|
/**
|
|
* drm_fb_helper_cfb_imageblit - wrapper around cfb_imageblit
|
|
* @info: fbdev registered by the helper
|
|
* @image: info about image to blit
|
|
*
|
|
* A wrapper around cfb_imageblit implemented by fbdev core
|
|
*/
|
|
void drm_fb_helper_cfb_imageblit(struct fb_info *info,
|
|
const struct fb_image *image)
|
|
{
|
|
cfb_imageblit(info, image);
|
|
drm_fb_helper_dirty(info, image->dx, image->dy,
|
|
image->width, image->height);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_cfb_imageblit);
|
|
|
|
/**
|
|
* drm_fb_helper_set_suspend - wrapper around fb_set_suspend
|
|
* @fb_helper: driver-allocated fbdev helper
|
|
* @suspend: whether to suspend or resume
|
|
*
|
|
* A wrapper around fb_set_suspend implemented by fbdev core.
|
|
* Use drm_fb_helper_set_suspend_unlocked() if you don't need to take
|
|
* the lock yourself
|
|
*/
|
|
void drm_fb_helper_set_suspend(struct drm_fb_helper *fb_helper, bool suspend)
|
|
{
|
|
if (fb_helper && fb_helper->fbdev)
|
|
fb_set_suspend(fb_helper->fbdev, suspend);
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_set_suspend);
|
|
|
|
/**
|
|
* drm_fb_helper_set_suspend_unlocked - wrapper around fb_set_suspend that also
|
|
* takes the console lock
|
|
* @fb_helper: driver-allocated fbdev helper
|
|
* @suspend: whether to suspend or resume
|
|
*
|
|
* A wrapper around fb_set_suspend() that takes the console lock. If the lock
|
|
* isn't available on resume, a worker is tasked with waiting for the lock
|
|
* to become available. The console lock can be pretty contented on resume
|
|
* due to all the printk activity.
|
|
*
|
|
* This function can be called multiple times with the same state since
|
|
* &fb_info.state is checked to see if fbdev is running or not before locking.
|
|
*
|
|
* Use drm_fb_helper_set_suspend() if you need to take the lock yourself.
|
|
*/
|
|
void drm_fb_helper_set_suspend_unlocked(struct drm_fb_helper *fb_helper,
|
|
bool suspend)
|
|
{
|
|
if (!fb_helper || !fb_helper->fbdev)
|
|
return;
|
|
|
|
/* make sure there's no pending/ongoing resume */
|
|
flush_work(&fb_helper->resume_work);
|
|
|
|
if (suspend) {
|
|
if (fb_helper->fbdev->state != FBINFO_STATE_RUNNING)
|
|
return;
|
|
|
|
console_lock();
|
|
|
|
} else {
|
|
if (fb_helper->fbdev->state == FBINFO_STATE_RUNNING)
|
|
return;
|
|
|
|
if (!console_trylock()) {
|
|
schedule_work(&fb_helper->resume_work);
|
|
return;
|
|
}
|
|
}
|
|
|
|
fb_set_suspend(fb_helper->fbdev, suspend);
|
|
console_unlock();
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_set_suspend_unlocked);
|
|
|
|
static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
|
|
u16 blue, u16 regno, struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_framebuffer *fb = fb_helper->fb;
|
|
|
|
if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
|
|
u32 *palette;
|
|
u32 value;
|
|
/* place color in psuedopalette */
|
|
if (regno > 16)
|
|
return -EINVAL;
|
|
palette = (u32 *)info->pseudo_palette;
|
|
red >>= (16 - info->var.red.length);
|
|
green >>= (16 - info->var.green.length);
|
|
blue >>= (16 - info->var.blue.length);
|
|
value = (red << info->var.red.offset) |
|
|
(green << info->var.green.offset) |
|
|
(blue << info->var.blue.offset);
|
|
if (info->var.transp.length > 0) {
|
|
u32 mask = (1 << info->var.transp.length) - 1;
|
|
|
|
mask <<= info->var.transp.offset;
|
|
value |= mask;
|
|
}
|
|
palette[regno] = value;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The driver really shouldn't advertise pseudo/directcolor
|
|
* visuals if it can't deal with the palette.
|
|
*/
|
|
if (WARN_ON(!fb_helper->funcs->gamma_set ||
|
|
!fb_helper->funcs->gamma_get))
|
|
return -EINVAL;
|
|
|
|
WARN_ON(fb->format->cpp[0] != 1);
|
|
|
|
fb_helper->funcs->gamma_set(crtc, red, green, blue, regno);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_setcmap - implementation for &fb_ops.fb_setcmap
|
|
* @cmap: cmap to set
|
|
* @info: fbdev registered by the helper
|
|
*/
|
|
int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_device *dev = fb_helper->dev;
|
|
const struct drm_crtc_helper_funcs *crtc_funcs;
|
|
u16 *red, *green, *blue, *transp;
|
|
struct drm_crtc *crtc;
|
|
int i, j, rc = 0;
|
|
int start;
|
|
|
|
if (oops_in_progress)
|
|
return -EBUSY;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
if (!drm_fb_helper_is_bound(fb_helper)) {
|
|
drm_modeset_unlock_all(dev);
|
|
return -EBUSY;
|
|
}
|
|
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
crtc = fb_helper->crtc_info[i].mode_set.crtc;
|
|
crtc_funcs = crtc->helper_private;
|
|
|
|
red = cmap->red;
|
|
green = cmap->green;
|
|
blue = cmap->blue;
|
|
transp = cmap->transp;
|
|
start = cmap->start;
|
|
|
|
for (j = 0; j < cmap->len; j++) {
|
|
u16 hred, hgreen, hblue, htransp = 0xffff;
|
|
|
|
hred = *red++;
|
|
hgreen = *green++;
|
|
hblue = *blue++;
|
|
|
|
if (transp)
|
|
htransp = *transp++;
|
|
|
|
rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
|
|
if (rc)
|
|
goto out;
|
|
}
|
|
if (crtc_funcs->load_lut)
|
|
crtc_funcs->load_lut(crtc);
|
|
}
|
|
out:
|
|
drm_modeset_unlock_all(dev);
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_setcmap);
|
|
|
|
/**
|
|
* drm_fb_helper_ioctl - legacy ioctl implementation
|
|
* @info: fbdev registered by the helper
|
|
* @cmd: ioctl command
|
|
* @arg: ioctl argument
|
|
*
|
|
* A helper to implement the standard fbdev ioctl. Only
|
|
* FBIO_WAITFORVSYNC is implemented for now.
|
|
*/
|
|
int drm_fb_helper_ioctl(struct fb_info *info, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_mode_set *mode_set;
|
|
struct drm_crtc *crtc;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
if (!drm_fb_helper_is_bound(fb_helper)) {
|
|
ret = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case FBIO_WAITFORVSYNC:
|
|
/*
|
|
* Only consider the first CRTC.
|
|
*
|
|
* This ioctl is supposed to take the CRTC number as
|
|
* an argument, but in fbdev times, what that number
|
|
* was supposed to be was quite unclear, different
|
|
* drivers were passing that argument differently
|
|
* (some by reference, some by value), and most of the
|
|
* userspace applications were just hardcoding 0 as an
|
|
* argument.
|
|
*
|
|
* The first CRTC should be the integrated panel on
|
|
* most drivers, so this is the best choice we can
|
|
* make. If we're not smart enough here, one should
|
|
* just consider switch the userspace to KMS.
|
|
*/
|
|
mode_set = &fb_helper->crtc_info[0].mode_set;
|
|
crtc = mode_set->crtc;
|
|
|
|
/*
|
|
* Only wait for a vblank event if the CRTC is
|
|
* enabled, otherwise just don't do anythintg,
|
|
* not even report an error.
|
|
*/
|
|
ret = drm_crtc_vblank_get(crtc);
|
|
if (!ret) {
|
|
drm_crtc_wait_one_vblank(crtc);
|
|
drm_crtc_vblank_put(crtc);
|
|
}
|
|
|
|
ret = 0;
|
|
goto unlock;
|
|
default:
|
|
ret = -ENOTTY;
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_ioctl);
|
|
|
|
/**
|
|
* drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var
|
|
* @var: screeninfo to check
|
|
* @info: fbdev registered by the helper
|
|
*/
|
|
int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_framebuffer *fb = fb_helper->fb;
|
|
int depth;
|
|
|
|
if (var->pixclock != 0 || in_dbg_master())
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Changes struct fb_var_screeninfo are currently not pushed back
|
|
* to KMS, hence fail if different settings are requested.
|
|
*/
|
|
if (var->bits_per_pixel != fb->format->cpp[0] * 8 ||
|
|
var->xres > fb->width || var->yres > fb->height ||
|
|
var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
|
|
DRM_DEBUG("fb requested width/height/bpp can't fit in current fb "
|
|
"request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
|
|
var->xres, var->yres, var->bits_per_pixel,
|
|
var->xres_virtual, var->yres_virtual,
|
|
fb->width, fb->height, fb->format->cpp[0] * 8);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 16:
|
|
depth = (var->green.length == 6) ? 16 : 15;
|
|
break;
|
|
case 32:
|
|
depth = (var->transp.length > 0) ? 32 : 24;
|
|
break;
|
|
default:
|
|
depth = var->bits_per_pixel;
|
|
break;
|
|
}
|
|
|
|
switch (depth) {
|
|
case 8:
|
|
var->red.offset = 0;
|
|
var->green.offset = 0;
|
|
var->blue.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
var->transp.length = 0;
|
|
var->transp.offset = 0;
|
|
break;
|
|
case 15:
|
|
var->red.offset = 10;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.length = 5;
|
|
var->blue.length = 5;
|
|
var->transp.length = 1;
|
|
var->transp.offset = 15;
|
|
break;
|
|
case 16:
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.length = 6;
|
|
var->blue.length = 5;
|
|
var->transp.length = 0;
|
|
var->transp.offset = 0;
|
|
break;
|
|
case 24:
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
var->transp.length = 0;
|
|
var->transp.offset = 0;
|
|
break;
|
|
case 32:
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
var->transp.length = 8;
|
|
var->transp.offset = 24;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_check_var);
|
|
|
|
/**
|
|
* drm_fb_helper_set_par - implementation for &fb_ops.fb_set_par
|
|
* @info: fbdev registered by the helper
|
|
*
|
|
* This will let fbcon do the mode init and is called at initialization time by
|
|
* the fbdev core when registering the driver, and later on through the hotplug
|
|
* callback.
|
|
*/
|
|
int drm_fb_helper_set_par(struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
if (oops_in_progress)
|
|
return -EBUSY;
|
|
|
|
if (var->pixclock != 0) {
|
|
DRM_ERROR("PIXEL CLOCK SET\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_set_par);
|
|
|
|
static int pan_display_atomic(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_atomic_state *state;
|
|
struct drm_plane *plane;
|
|
int i, ret;
|
|
unsigned int plane_mask;
|
|
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->acquire_ctx = dev->mode_config.acquire_ctx;
|
|
retry:
|
|
plane_mask = 0;
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
struct drm_mode_set *mode_set;
|
|
|
|
mode_set = &fb_helper->crtc_info[i].mode_set;
|
|
|
|
mode_set->x = var->xoffset;
|
|
mode_set->y = var->yoffset;
|
|
|
|
ret = __drm_atomic_helper_set_config(mode_set, state);
|
|
if (ret != 0)
|
|
goto fail;
|
|
|
|
plane = mode_set->crtc->primary;
|
|
plane_mask |= (1 << drm_plane_index(plane));
|
|
plane->old_fb = plane->fb;
|
|
}
|
|
|
|
ret = drm_atomic_commit(state);
|
|
if (ret != 0)
|
|
goto fail;
|
|
|
|
info->var.xoffset = var->xoffset;
|
|
info->var.yoffset = var->yoffset;
|
|
|
|
fail:
|
|
drm_atomic_clean_old_fb(dev, plane_mask, ret);
|
|
|
|
if (ret == -EDEADLK)
|
|
goto backoff;
|
|
|
|
drm_atomic_state_put(state);
|
|
return ret;
|
|
|
|
backoff:
|
|
drm_atomic_state_clear(state);
|
|
drm_atomic_legacy_backoff(state);
|
|
|
|
goto retry;
|
|
}
|
|
|
|
static int pan_display_legacy(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_mode_set *modeset;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
modeset = &fb_helper->crtc_info[i].mode_set;
|
|
|
|
modeset->x = var->xoffset;
|
|
modeset->y = var->yoffset;
|
|
|
|
if (modeset->num_connectors) {
|
|
ret = drm_mode_set_config_internal(modeset);
|
|
if (!ret) {
|
|
info->var.xoffset = var->xoffset;
|
|
info->var.yoffset = var->yoffset;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_pan_display - implementation for &fb_ops.fb_pan_display
|
|
* @var: updated screen information
|
|
* @info: fbdev registered by the helper
|
|
*/
|
|
int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct drm_fb_helper *fb_helper = info->par;
|
|
struct drm_device *dev = fb_helper->dev;
|
|
int ret;
|
|
|
|
if (oops_in_progress)
|
|
return -EBUSY;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
if (!drm_fb_helper_is_bound(fb_helper)) {
|
|
drm_modeset_unlock_all(dev);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (drm_drv_uses_atomic_modeset(dev))
|
|
ret = pan_display_atomic(var, info);
|
|
else
|
|
ret = pan_display_legacy(var, info);
|
|
drm_modeset_unlock_all(dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_pan_display);
|
|
|
|
/*
|
|
* Allocates the backing storage and sets up the fbdev info structure through
|
|
* the ->fb_probe callback and then registers the fbdev and sets up the panic
|
|
* notifier.
|
|
*/
|
|
static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
|
|
int preferred_bpp)
|
|
{
|
|
int ret = 0;
|
|
int crtc_count = 0;
|
|
int i;
|
|
struct drm_fb_helper_surface_size sizes;
|
|
int gamma_size = 0;
|
|
|
|
memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size));
|
|
sizes.surface_depth = 24;
|
|
sizes.surface_bpp = 32;
|
|
sizes.fb_width = (u32)-1;
|
|
sizes.fb_height = (u32)-1;
|
|
|
|
/* if driver picks 8 or 16 by default use that for both depth/bpp */
|
|
if (preferred_bpp != sizes.surface_bpp)
|
|
sizes.surface_depth = sizes.surface_bpp = preferred_bpp;
|
|
|
|
/* first up get a count of crtcs now in use and new min/maxes width/heights */
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
|
|
struct drm_cmdline_mode *cmdline_mode;
|
|
|
|
cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
|
|
|
|
if (cmdline_mode->bpp_specified) {
|
|
switch (cmdline_mode->bpp) {
|
|
case 8:
|
|
sizes.surface_depth = sizes.surface_bpp = 8;
|
|
break;
|
|
case 15:
|
|
sizes.surface_depth = 15;
|
|
sizes.surface_bpp = 16;
|
|
break;
|
|
case 16:
|
|
sizes.surface_depth = sizes.surface_bpp = 16;
|
|
break;
|
|
case 24:
|
|
sizes.surface_depth = sizes.surface_bpp = 24;
|
|
break;
|
|
case 32:
|
|
sizes.surface_depth = 24;
|
|
sizes.surface_bpp = 32;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
crtc_count = 0;
|
|
for (i = 0; i < fb_helper->crtc_count; i++) {
|
|
struct drm_display_mode *desired_mode;
|
|
struct drm_mode_set *mode_set;
|
|
int x, y, j;
|
|
/* in case of tile group, are we the last tile vert or horiz?
|
|
* If no tile group you are always the last one both vertically
|
|
* and horizontally
|
|
*/
|
|
bool lastv = true, lasth = true;
|
|
|
|
desired_mode = fb_helper->crtc_info[i].desired_mode;
|
|
mode_set = &fb_helper->crtc_info[i].mode_set;
|
|
|
|
if (!desired_mode)
|
|
continue;
|
|
|
|
crtc_count++;
|
|
|
|
x = fb_helper->crtc_info[i].x;
|
|
y = fb_helper->crtc_info[i].y;
|
|
|
|
if (gamma_size == 0)
|
|
gamma_size = fb_helper->crtc_info[i].mode_set.crtc->gamma_size;
|
|
|
|
sizes.surface_width = max_t(u32, desired_mode->hdisplay + x, sizes.surface_width);
|
|
sizes.surface_height = max_t(u32, desired_mode->vdisplay + y, sizes.surface_height);
|
|
|
|
for (j = 0; j < mode_set->num_connectors; j++) {
|
|
struct drm_connector *connector = mode_set->connectors[j];
|
|
|
|
if (connector->has_tile) {
|
|
lasth = (connector->tile_h_loc == (connector->num_h_tile - 1));
|
|
lastv = (connector->tile_v_loc == (connector->num_v_tile - 1));
|
|
/* cloning to multiple tiles is just crazy-talk, so: */
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (lasth)
|
|
sizes.fb_width = min_t(u32, desired_mode->hdisplay + x, sizes.fb_width);
|
|
if (lastv)
|
|
sizes.fb_height = min_t(u32, desired_mode->vdisplay + y, sizes.fb_height);
|
|
}
|
|
|
|
if (crtc_count == 0 || sizes.fb_width == -1 || sizes.fb_height == -1) {
|
|
/*
|
|
* hmm everyone went away - assume VGA cable just fell out
|
|
* and will come back later.
|
|
*/
|
|
DRM_INFO("Cannot find any crtc or sizes - going 1024x768\n");
|
|
sizes.fb_width = sizes.surface_width = 1024;
|
|
sizes.fb_height = sizes.surface_height = 768;
|
|
}
|
|
|
|
/* Handle our overallocation */
|
|
sizes.surface_height *= drm_fbdev_overalloc;
|
|
sizes.surface_height /= 100;
|
|
|
|
/* push down into drivers */
|
|
ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Set the fb pointer - usually drm_setup_crtcs does this for hotplug
|
|
* events, but at init time drm_setup_crtcs needs to be called before
|
|
* the fb is allocated (since we need to figure out the desired size of
|
|
* the fb before we can allocate it ...). Hence we need to fix things up
|
|
* here again.
|
|
*/
|
|
for (i = 0; i < fb_helper->crtc_count; i++)
|
|
if (fb_helper->crtc_info[i].mode_set.num_connectors)
|
|
fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_fill_fix - initializes fixed fbdev information
|
|
* @info: fbdev registered by the helper
|
|
* @pitch: desired pitch
|
|
* @depth: desired depth
|
|
*
|
|
* Helper to fill in the fixed fbdev information useful for a non-accelerated
|
|
* fbdev emulations. Drivers which support acceleration methods which impose
|
|
* additional constraints need to set up their own limits.
|
|
*
|
|
* Drivers should call this (or their equivalent setup code) from their
|
|
* &drm_fb_helper_funcs.fb_probe callback.
|
|
*/
|
|
void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
|
|
uint32_t depth)
|
|
{
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
|
|
FB_VISUAL_TRUECOLOR;
|
|
info->fix.mmio_start = 0;
|
|
info->fix.mmio_len = 0;
|
|
info->fix.type_aux = 0;
|
|
info->fix.xpanstep = 1; /* doing it in hw */
|
|
info->fix.ypanstep = 1; /* doing it in hw */
|
|
info->fix.ywrapstep = 0;
|
|
info->fix.accel = FB_ACCEL_NONE;
|
|
|
|
info->fix.line_length = pitch;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_fill_fix);
|
|
|
|
/**
|
|
* drm_fb_helper_fill_var - initalizes variable fbdev information
|
|
* @info: fbdev instance to set up
|
|
* @fb_helper: fb helper instance to use as template
|
|
* @fb_width: desired fb width
|
|
* @fb_height: desired fb height
|
|
*
|
|
* Sets up the variable fbdev metainformation from the given fb helper instance
|
|
* and the drm framebuffer allocated in &drm_fb_helper.fb.
|
|
*
|
|
* Drivers should call this (or their equivalent setup code) from their
|
|
* &drm_fb_helper_funcs.fb_probe callback after having allocated the fbdev
|
|
* backing storage framebuffer.
|
|
*/
|
|
void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
|
|
uint32_t fb_width, uint32_t fb_height)
|
|
{
|
|
struct drm_framebuffer *fb = fb_helper->fb;
|
|
|
|
info->pseudo_palette = fb_helper->pseudo_palette;
|
|
info->var.xres_virtual = fb->width;
|
|
info->var.yres_virtual = fb->height;
|
|
info->var.bits_per_pixel = fb->format->cpp[0] * 8;
|
|
info->var.accel_flags = FB_ACCELF_TEXT;
|
|
info->var.xoffset = 0;
|
|
info->var.yoffset = 0;
|
|
info->var.activate = FB_ACTIVATE_NOW;
|
|
info->var.height = -1;
|
|
info->var.width = -1;
|
|
|
|
switch (fb->format->depth) {
|
|
case 8:
|
|
info->var.red.offset = 0;
|
|
info->var.green.offset = 0;
|
|
info->var.blue.offset = 0;
|
|
info->var.red.length = 8; /* 8bit DAC */
|
|
info->var.green.length = 8;
|
|
info->var.blue.length = 8;
|
|
info->var.transp.offset = 0;
|
|
info->var.transp.length = 0;
|
|
break;
|
|
case 15:
|
|
info->var.red.offset = 10;
|
|
info->var.green.offset = 5;
|
|
info->var.blue.offset = 0;
|
|
info->var.red.length = 5;
|
|
info->var.green.length = 5;
|
|
info->var.blue.length = 5;
|
|
info->var.transp.offset = 15;
|
|
info->var.transp.length = 1;
|
|
break;
|
|
case 16:
|
|
info->var.red.offset = 11;
|
|
info->var.green.offset = 5;
|
|
info->var.blue.offset = 0;
|
|
info->var.red.length = 5;
|
|
info->var.green.length = 6;
|
|
info->var.blue.length = 5;
|
|
info->var.transp.offset = 0;
|
|
break;
|
|
case 24:
|
|
info->var.red.offset = 16;
|
|
info->var.green.offset = 8;
|
|
info->var.blue.offset = 0;
|
|
info->var.red.length = 8;
|
|
info->var.green.length = 8;
|
|
info->var.blue.length = 8;
|
|
info->var.transp.offset = 0;
|
|
info->var.transp.length = 0;
|
|
break;
|
|
case 32:
|
|
info->var.red.offset = 16;
|
|
info->var.green.offset = 8;
|
|
info->var.blue.offset = 0;
|
|
info->var.red.length = 8;
|
|
info->var.green.length = 8;
|
|
info->var.blue.length = 8;
|
|
info->var.transp.offset = 24;
|
|
info->var.transp.length = 8;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
info->var.xres = fb_width;
|
|
info->var.yres = fb_height;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_fill_var);
|
|
|
|
static int drm_fb_helper_probe_connector_modes(struct drm_fb_helper *fb_helper,
|
|
uint32_t maxX,
|
|
uint32_t maxY)
|
|
{
|
|
struct drm_connector *connector;
|
|
int count = 0;
|
|
int i;
|
|
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
connector = fb_helper->connector_info[i]->connector;
|
|
count += connector->funcs->fill_modes(connector, maxX, maxY);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
struct drm_display_mode *drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector, int width, int height)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
list_for_each_entry(mode, &fb_connector->connector->modes, head) {
|
|
if (mode->hdisplay > width ||
|
|
mode->vdisplay > height)
|
|
continue;
|
|
if (mode->type & DRM_MODE_TYPE_PREFERRED)
|
|
return mode;
|
|
}
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(drm_has_preferred_mode);
|
|
|
|
static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
|
|
{
|
|
return fb_connector->connector->cmdline_mode.specified;
|
|
}
|
|
|
|
struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn)
|
|
{
|
|
struct drm_cmdline_mode *cmdline_mode;
|
|
struct drm_display_mode *mode;
|
|
bool prefer_non_interlace;
|
|
|
|
cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
|
|
if (cmdline_mode->specified == false)
|
|
return NULL;
|
|
|
|
/* attempt to find a matching mode in the list of modes
|
|
* we have gotten so far, if not add a CVT mode that conforms
|
|
*/
|
|
if (cmdline_mode->rb || cmdline_mode->margins)
|
|
goto create_mode;
|
|
|
|
prefer_non_interlace = !cmdline_mode->interlace;
|
|
again:
|
|
list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
|
|
/* check width/height */
|
|
if (mode->hdisplay != cmdline_mode->xres ||
|
|
mode->vdisplay != cmdline_mode->yres)
|
|
continue;
|
|
|
|
if (cmdline_mode->refresh_specified) {
|
|
if (mode->vrefresh != cmdline_mode->refresh)
|
|
continue;
|
|
}
|
|
|
|
if (cmdline_mode->interlace) {
|
|
if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
|
|
continue;
|
|
} else if (prefer_non_interlace) {
|
|
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
|
|
continue;
|
|
}
|
|
return mode;
|
|
}
|
|
|
|
if (prefer_non_interlace) {
|
|
prefer_non_interlace = false;
|
|
goto again;
|
|
}
|
|
|
|
create_mode:
|
|
mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
|
|
cmdline_mode);
|
|
list_add(&mode->head, &fb_helper_conn->connector->modes);
|
|
return mode;
|
|
}
|
|
EXPORT_SYMBOL(drm_pick_cmdline_mode);
|
|
|
|
static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
|
|
{
|
|
bool enable;
|
|
|
|
if (strict)
|
|
enable = connector->status == connector_status_connected;
|
|
else
|
|
enable = connector->status != connector_status_disconnected;
|
|
|
|
return enable;
|
|
}
|
|
|
|
static void drm_enable_connectors(struct drm_fb_helper *fb_helper,
|
|
bool *enabled)
|
|
{
|
|
bool any_enabled = false;
|
|
struct drm_connector *connector;
|
|
int i = 0;
|
|
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
connector = fb_helper->connector_info[i]->connector;
|
|
enabled[i] = drm_connector_enabled(connector, true);
|
|
DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
|
|
enabled[i] ? "yes" : "no");
|
|
any_enabled |= enabled[i];
|
|
}
|
|
|
|
if (any_enabled)
|
|
return;
|
|
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
connector = fb_helper->connector_info[i]->connector;
|
|
enabled[i] = drm_connector_enabled(connector, false);
|
|
}
|
|
}
|
|
|
|
static bool drm_target_cloned(struct drm_fb_helper *fb_helper,
|
|
struct drm_display_mode **modes,
|
|
struct drm_fb_offset *offsets,
|
|
bool *enabled, int width, int height)
|
|
{
|
|
int count, i, j;
|
|
bool can_clone = false;
|
|
struct drm_fb_helper_connector *fb_helper_conn;
|
|
struct drm_display_mode *dmt_mode, *mode;
|
|
|
|
/* only contemplate cloning in the single crtc case */
|
|
if (fb_helper->crtc_count > 1)
|
|
return false;
|
|
|
|
count = 0;
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
if (enabled[i])
|
|
count++;
|
|
}
|
|
|
|
/* only contemplate cloning if more than one connector is enabled */
|
|
if (count <= 1)
|
|
return false;
|
|
|
|
/* check the command line or if nothing common pick 1024x768 */
|
|
can_clone = true;
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
if (!enabled[i])
|
|
continue;
|
|
fb_helper_conn = fb_helper->connector_info[i];
|
|
modes[i] = drm_pick_cmdline_mode(fb_helper_conn);
|
|
if (!modes[i]) {
|
|
can_clone = false;
|
|
break;
|
|
}
|
|
for (j = 0; j < i; j++) {
|
|
if (!enabled[j])
|
|
continue;
|
|
if (!drm_mode_equal(modes[j], modes[i]))
|
|
can_clone = false;
|
|
}
|
|
}
|
|
|
|
if (can_clone) {
|
|
DRM_DEBUG_KMS("can clone using command line\n");
|
|
return true;
|
|
}
|
|
|
|
/* try and find a 1024x768 mode on each connector */
|
|
can_clone = true;
|
|
dmt_mode = drm_mode_find_dmt(fb_helper->dev, 1024, 768, 60, false);
|
|
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
if (!enabled[i])
|
|
continue;
|
|
|
|
fb_helper_conn = fb_helper->connector_info[i];
|
|
list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
|
|
if (drm_mode_equal(mode, dmt_mode))
|
|
modes[i] = mode;
|
|
}
|
|
if (!modes[i])
|
|
can_clone = false;
|
|
}
|
|
|
|
if (can_clone) {
|
|
DRM_DEBUG_KMS("can clone using 1024x768\n");
|
|
return true;
|
|
}
|
|
DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
|
|
return false;
|
|
}
|
|
|
|
static int drm_get_tile_offsets(struct drm_fb_helper *fb_helper,
|
|
struct drm_display_mode **modes,
|
|
struct drm_fb_offset *offsets,
|
|
int idx,
|
|
int h_idx, int v_idx)
|
|
{
|
|
struct drm_fb_helper_connector *fb_helper_conn;
|
|
int i;
|
|
int hoffset = 0, voffset = 0;
|
|
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
fb_helper_conn = fb_helper->connector_info[i];
|
|
if (!fb_helper_conn->connector->has_tile)
|
|
continue;
|
|
|
|
if (!modes[i] && (h_idx || v_idx)) {
|
|
DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
|
|
fb_helper_conn->connector->base.id);
|
|
continue;
|
|
}
|
|
if (fb_helper_conn->connector->tile_h_loc < h_idx)
|
|
hoffset += modes[i]->hdisplay;
|
|
|
|
if (fb_helper_conn->connector->tile_v_loc < v_idx)
|
|
voffset += modes[i]->vdisplay;
|
|
}
|
|
offsets[idx].x = hoffset;
|
|
offsets[idx].y = voffset;
|
|
DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
|
|
return 0;
|
|
}
|
|
|
|
static bool drm_target_preferred(struct drm_fb_helper *fb_helper,
|
|
struct drm_display_mode **modes,
|
|
struct drm_fb_offset *offsets,
|
|
bool *enabled, int width, int height)
|
|
{
|
|
struct drm_fb_helper_connector *fb_helper_conn;
|
|
const u64 mask = BIT_ULL(fb_helper->connector_count) - 1;
|
|
u64 conn_configured = 0;
|
|
int tile_pass = 0;
|
|
int i;
|
|
|
|
retry:
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
fb_helper_conn = fb_helper->connector_info[i];
|
|
|
|
if (conn_configured & BIT_ULL(i))
|
|
continue;
|
|
|
|
if (enabled[i] == false) {
|
|
conn_configured |= BIT_ULL(i);
|
|
continue;
|
|
}
|
|
|
|
/* first pass over all the untiled connectors */
|
|
if (tile_pass == 0 && fb_helper_conn->connector->has_tile)
|
|
continue;
|
|
|
|
if (tile_pass == 1) {
|
|
if (fb_helper_conn->connector->tile_h_loc != 0 ||
|
|
fb_helper_conn->connector->tile_v_loc != 0)
|
|
continue;
|
|
|
|
} else {
|
|
if (fb_helper_conn->connector->tile_h_loc != tile_pass - 1 &&
|
|
fb_helper_conn->connector->tile_v_loc != tile_pass - 1)
|
|
/* if this tile_pass doesn't cover any of the tiles - keep going */
|
|
continue;
|
|
|
|
/*
|
|
* find the tile offsets for this pass - need to find
|
|
* all tiles left and above
|
|
*/
|
|
drm_get_tile_offsets(fb_helper, modes, offsets,
|
|
i, fb_helper_conn->connector->tile_h_loc, fb_helper_conn->connector->tile_v_loc);
|
|
}
|
|
DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
|
|
fb_helper_conn->connector->base.id);
|
|
|
|
/* got for command line mode first */
|
|
modes[i] = drm_pick_cmdline_mode(fb_helper_conn);
|
|
if (!modes[i]) {
|
|
DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
|
|
fb_helper_conn->connector->base.id, fb_helper_conn->connector->tile_group ? fb_helper_conn->connector->tile_group->id : 0);
|
|
modes[i] = drm_has_preferred_mode(fb_helper_conn, width, height);
|
|
}
|
|
/* No preferred modes, pick one off the list */
|
|
if (!modes[i] && !list_empty(&fb_helper_conn->connector->modes)) {
|
|
list_for_each_entry(modes[i], &fb_helper_conn->connector->modes, head)
|
|
break;
|
|
}
|
|
DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
|
|
"none");
|
|
conn_configured |= BIT_ULL(i);
|
|
}
|
|
|
|
if ((conn_configured & mask) != mask) {
|
|
tile_pass++;
|
|
goto retry;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
|
|
struct drm_fb_helper_crtc **best_crtcs,
|
|
struct drm_display_mode **modes,
|
|
int n, int width, int height)
|
|
{
|
|
int c, o;
|
|
struct drm_connector *connector;
|
|
const struct drm_connector_helper_funcs *connector_funcs;
|
|
struct drm_encoder *encoder;
|
|
int my_score, best_score, score;
|
|
struct drm_fb_helper_crtc **crtcs, *crtc;
|
|
struct drm_fb_helper_connector *fb_helper_conn;
|
|
|
|
if (n == fb_helper->connector_count)
|
|
return 0;
|
|
|
|
fb_helper_conn = fb_helper->connector_info[n];
|
|
connector = fb_helper_conn->connector;
|
|
|
|
best_crtcs[n] = NULL;
|
|
best_score = drm_pick_crtcs(fb_helper, best_crtcs, modes, n+1, width, height);
|
|
if (modes[n] == NULL)
|
|
return best_score;
|
|
|
|
crtcs = kzalloc(fb_helper->connector_count *
|
|
sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
|
|
if (!crtcs)
|
|
return best_score;
|
|
|
|
my_score = 1;
|
|
if (connector->status == connector_status_connected)
|
|
my_score++;
|
|
if (drm_has_cmdline_mode(fb_helper_conn))
|
|
my_score++;
|
|
if (drm_has_preferred_mode(fb_helper_conn, width, height))
|
|
my_score++;
|
|
|
|
connector_funcs = connector->helper_private;
|
|
|
|
/*
|
|
* If the DRM device implements atomic hooks and ->best_encoder() is
|
|
* NULL we fallback to the default drm_atomic_helper_best_encoder()
|
|
* helper.
|
|
*/
|
|
if (drm_drv_uses_atomic_modeset(fb_helper->dev) &&
|
|
!connector_funcs->best_encoder)
|
|
encoder = drm_atomic_helper_best_encoder(connector);
|
|
else
|
|
encoder = connector_funcs->best_encoder(connector);
|
|
|
|
if (!encoder)
|
|
goto out;
|
|
|
|
/*
|
|
* select a crtc for this connector and then attempt to configure
|
|
* remaining connectors
|
|
*/
|
|
for (c = 0; c < fb_helper->crtc_count; c++) {
|
|
crtc = &fb_helper->crtc_info[c];
|
|
|
|
if ((encoder->possible_crtcs & (1 << c)) == 0)
|
|
continue;
|
|
|
|
for (o = 0; o < n; o++)
|
|
if (best_crtcs[o] == crtc)
|
|
break;
|
|
|
|
if (o < n) {
|
|
/* ignore cloning unless only a single crtc */
|
|
if (fb_helper->crtc_count > 1)
|
|
continue;
|
|
|
|
if (!drm_mode_equal(modes[o], modes[n]))
|
|
continue;
|
|
}
|
|
|
|
crtcs[n] = crtc;
|
|
memcpy(crtcs, best_crtcs, n * sizeof(struct drm_fb_helper_crtc *));
|
|
score = my_score + drm_pick_crtcs(fb_helper, crtcs, modes, n + 1,
|
|
width, height);
|
|
if (score > best_score) {
|
|
best_score = score;
|
|
memcpy(best_crtcs, crtcs,
|
|
fb_helper->connector_count *
|
|
sizeof(struct drm_fb_helper_crtc *));
|
|
}
|
|
}
|
|
out:
|
|
kfree(crtcs);
|
|
return best_score;
|
|
}
|
|
|
|
static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
|
|
u32 width, u32 height)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct drm_fb_helper_crtc **crtcs;
|
|
struct drm_display_mode **modes;
|
|
struct drm_fb_offset *offsets;
|
|
bool *enabled;
|
|
int i;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
|
|
DRM_DEBUG_KMS("No connectors reported connected with modes\n");
|
|
|
|
/* prevent concurrent modification of connector_count by hotplug */
|
|
lockdep_assert_held(&fb_helper->dev->mode_config.mutex);
|
|
|
|
crtcs = kcalloc(fb_helper->connector_count,
|
|
sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
|
|
modes = kcalloc(fb_helper->connector_count,
|
|
sizeof(struct drm_display_mode *), GFP_KERNEL);
|
|
offsets = kcalloc(fb_helper->connector_count,
|
|
sizeof(struct drm_fb_offset), GFP_KERNEL);
|
|
enabled = kcalloc(fb_helper->connector_count,
|
|
sizeof(bool), GFP_KERNEL);
|
|
if (!crtcs || !modes || !enabled || !offsets) {
|
|
DRM_ERROR("Memory allocation failed\n");
|
|
goto out;
|
|
}
|
|
|
|
drm_enable_connectors(fb_helper, enabled);
|
|
|
|
if (!(fb_helper->funcs->initial_config &&
|
|
fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
|
|
offsets,
|
|
enabled, width, height))) {
|
|
memset(modes, 0, fb_helper->connector_count*sizeof(modes[0]));
|
|
memset(crtcs, 0, fb_helper->connector_count*sizeof(crtcs[0]));
|
|
memset(offsets, 0, fb_helper->connector_count*sizeof(offsets[0]));
|
|
|
|
if (!drm_target_cloned(fb_helper, modes, offsets,
|
|
enabled, width, height) &&
|
|
!drm_target_preferred(fb_helper, modes, offsets,
|
|
enabled, width, height))
|
|
DRM_ERROR("Unable to find initial modes\n");
|
|
|
|
DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
|
|
width, height);
|
|
|
|
drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
|
|
}
|
|
|
|
/* need to set the modesets up here for use later */
|
|
/* fill out the connector<->crtc mappings into the modesets */
|
|
for (i = 0; i < fb_helper->crtc_count; i++)
|
|
drm_fb_helper_modeset_release(fb_helper,
|
|
&fb_helper->crtc_info[i].mode_set);
|
|
|
|
drm_fb_helper_for_each_connector(fb_helper, i) {
|
|
struct drm_display_mode *mode = modes[i];
|
|
struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
|
|
struct drm_fb_offset *offset = &offsets[i];
|
|
struct drm_mode_set *modeset = &fb_crtc->mode_set;
|
|
|
|
if (mode && fb_crtc) {
|
|
struct drm_connector *connector =
|
|
fb_helper->connector_info[i]->connector;
|
|
|
|
DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
|
|
mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y);
|
|
|
|
fb_crtc->desired_mode = mode;
|
|
fb_crtc->x = offset->x;
|
|
fb_crtc->y = offset->y;
|
|
modeset->mode = drm_mode_duplicate(dev,
|
|
fb_crtc->desired_mode);
|
|
drm_connector_get(connector);
|
|
modeset->connectors[modeset->num_connectors++] = connector;
|
|
modeset->fb = fb_helper->fb;
|
|
modeset->x = offset->x;
|
|
modeset->y = offset->y;
|
|
}
|
|
}
|
|
out:
|
|
kfree(crtcs);
|
|
kfree(modes);
|
|
kfree(offsets);
|
|
kfree(enabled);
|
|
}
|
|
|
|
/**
|
|
* drm_fb_helper_initial_config - setup a sane initial connector configuration
|
|
* @fb_helper: fb_helper device struct
|
|
* @bpp_sel: bpp value to use for the framebuffer configuration
|
|
*
|
|
* Scans the CRTCs and connectors and tries to put together an initial setup.
|
|
* At the moment, this is a cloned configuration across all heads with
|
|
* a new framebuffer object as the backing store.
|
|
*
|
|
* Note that this also registers the fbdev and so allows userspace to call into
|
|
* the driver through the fbdev interfaces.
|
|
*
|
|
* This function will call down into the &drm_fb_helper_funcs.fb_probe callback
|
|
* to let the driver allocate and initialize the fbdev info structure and the
|
|
* drm framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
|
|
* drm_fb_helper_fill_fix() are provided as helpers to setup simple default
|
|
* values for the fbdev info structure.
|
|
*
|
|
* HANG DEBUGGING:
|
|
*
|
|
* When you have fbcon support built-in or already loaded, this function will do
|
|
* a full modeset to setup the fbdev console. Due to locking misdesign in the
|
|
* VT/fbdev subsystem that entire modeset sequence has to be done while holding
|
|
* console_lock. Until console_unlock is called no dmesg lines will be sent out
|
|
* to consoles, not even serial console. This means when your driver crashes,
|
|
* you will see absolutely nothing else but a system stuck in this function,
|
|
* with no further output. Any kind of printk() you place within your own driver
|
|
* or in the drm core modeset code will also never show up.
|
|
*
|
|
* Standard debug practice is to run the fbcon setup without taking the
|
|
* console_lock as a hack, to be able to see backtraces and crashes on the
|
|
* serial line. This can be done by setting the fb.lockless_register_fb=1 kernel
|
|
* cmdline option.
|
|
*
|
|
* The other option is to just disable fbdev emulation since very likely the
|
|
* first modeset from userspace will crash in the same way, and is even easier
|
|
* to debug. This can be done by setting the drm_kms_helper.fbdev_emulation=0
|
|
* kernel cmdline option.
|
|
*
|
|
* RETURNS:
|
|
* Zero if everything went ok, nonzero otherwise.
|
|
*/
|
|
int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
struct fb_info *info;
|
|
int ret;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return 0;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
drm_setup_crtcs(fb_helper,
|
|
dev->mode_config.max_width,
|
|
dev->mode_config.max_height);
|
|
ret = drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
info = fb_helper->fbdev;
|
|
info->var.pixclock = 0;
|
|
ret = register_framebuffer(info);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_info(dev->dev, "fb%d: %s frame buffer device\n",
|
|
info->node, info->fix.id);
|
|
|
|
mutex_lock(&kernel_fb_helper_lock);
|
|
if (list_empty(&kernel_fb_helper_list))
|
|
register_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
|
|
|
|
list_add(&fb_helper->kernel_fb_list, &kernel_fb_helper_list);
|
|
mutex_unlock(&kernel_fb_helper_lock);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_initial_config);
|
|
|
|
/**
|
|
* drm_fb_helper_hotplug_event - respond to a hotplug notification by
|
|
* probing all the outputs attached to the fb
|
|
* @fb_helper: the drm_fb_helper
|
|
*
|
|
* Scan the connectors attached to the fb_helper and try to put together a
|
|
* setup after notification of a change in output configuration.
|
|
*
|
|
* Called at runtime, takes the mode config locks to be able to check/change the
|
|
* modeset configuration. Must be run from process context (which usually means
|
|
* either the output polling work or a work item launched from the driver's
|
|
* hotplug interrupt).
|
|
*
|
|
* Note that drivers may call this even before calling
|
|
* drm_fb_helper_initial_config but only after drm_fb_helper_init. This allows
|
|
* for a race-free fbcon setup and will make sure that the fbdev emulation will
|
|
* not miss any hotplug events.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success and a non-zero error code otherwise.
|
|
*/
|
|
int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
|
|
{
|
|
struct drm_device *dev = fb_helper->dev;
|
|
|
|
if (!drm_fbdev_emulation)
|
|
return 0;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
if (!fb_helper->fb || !drm_fb_helper_is_bound(fb_helper)) {
|
|
fb_helper->delayed_hotplug = true;
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
return 0;
|
|
}
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
drm_setup_crtcs(fb_helper, fb_helper->fb->width, fb_helper->fb->height);
|
|
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
|
|
drm_fb_helper_set_par(fb_helper->fbdev);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
|
|
|
|
/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
|
|
* but the module doesn't depend on any fb console symbols. At least
|
|
* attempt to load fbcon to avoid leaving the system without a usable console.
|
|
*/
|
|
int __init drm_fb_helper_modinit(void)
|
|
{
|
|
#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
|
|
const char name[] = "fbcon";
|
|
struct module *fbcon;
|
|
|
|
mutex_lock(&module_mutex);
|
|
fbcon = find_module(name);
|
|
mutex_unlock(&module_mutex);
|
|
|
|
if (!fbcon)
|
|
request_module_nowait(name);
|
|
#endif
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(drm_fb_helper_modinit);
|