redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-omap2/id.c
Russell King e8a91c953f [ARM] omap: Fix IO_ADDRESS() macros 
OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies
for use with __raw_{read|write}* for accessing registers.  Therefore,
these macros should return (void __iomem *) cookies, not integer values.

Doing this improves typechecking, and means we can find those places
where, eg, DMA controllers are incorrectly given virtual addresses to
DMA to, or physical addresses are thrown through a virtual to physical
address translation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 17:02:31 +01:00

271 lines
7.3 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/id.c
*
* OMAP2 CPU identification code
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <mach/control.h>
#include <mach/cpu.h>
#if defined(CONFIG_ARCH_OMAP2420)
#define TAP_BASE IO_ADDRESS(0x48014000)
#elif defined(CONFIG_ARCH_OMAP2430)
#define TAP_BASE IO_ADDRESS(0x4900A000)
#elif defined(CONFIG_ARCH_OMAP34XX)
#define TAP_BASE IO_ADDRESS(0x4830A000)
#endif
#define OMAP_TAP_IDCODE 0x0204
#if defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_TAP_PROD_ID 0x0210
#else
#define OMAP_TAP_PROD_ID 0x0208
#endif
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
#define OMAP_TAP_DIE_ID_3 0x0224
/* system_rev fields for OMAP2 processors:
* CPU id bits [31:16],
* CPU device type [15:12], (unprg,normal,POP)
* CPU revision [11:08]
* CPU class bits [07:00]
*/
struct omap_id {
u16 hawkeye; /* Silicon type (Hawkeye id) */
u8 dev; /* Device type from production_id reg */
u32 type; /* combined type id copied to system_rev */
};
/* Register values to detect the OMAP version */
static struct omap_id omap_ids[] __initdata = {
{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
};
static struct omap_chip_id omap_chip;
/**
* omap_chip_is - test whether currently running OMAP matches a chip type
* @oc: omap_chip_t to test against
*
* Test whether the currently-running OMAP chip matches the supplied
* chip type 'oc'. Returns 1 upon a match; 0 upon failure.
*/
int omap_chip_is(struct omap_chip_id oci)
{
return (oci.oc & omap_chip.oc) ? 1 : 0;
}
EXPORT_SYMBOL(omap_chip_is);
static u32 __init read_tap_reg(int reg)
{
unsigned int regval = 0;
u32 cpuid;
/* Reading the IDCODE register on 3430 ES1 results in a
* data abort as the register is not exposed on the OCP
* Hence reading the Cortex Rev
*/
cpuid = read_cpuid(CPUID_ID);
/* If the processor type is Cortex-A8 and the revision is 0x0
* it means its Cortex r0p0 which is 3430 ES1
*/
if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
switch (reg) {
case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break;
/* Making DevType as 0xF in ES1 to differ from ES2 */
case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
}
} else
regval = __raw_readl(TAP_BASE + reg);
return regval;
}
/*
* _set_system_rev - set the system_rev global based on current OMAP chip type
*
* Set the system_rev global. This is primarily used by the cpu_is_omapxxxx()
* macros.
*/
static void __init _set_system_rev(u32 type, u8 rev)
{
u32 i, ctrl_status;
/*
* system_rev encoding is as follows
* system_rev & 0xff000000 -> Omap Class (24xx/34xx)
* system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
* system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
* system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
* system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
* system_rev & 0x000000c0 -> IDCODE revision[6:7]
* system_rev & 0x0000003f -> sys_boot[0:5]
*/
/* Embedding the ES revision info in type field */
system_rev = type;
/* Also add IDCODE revision info only two lower bits */
system_rev |= ((rev & 0x3) << 6);
/* Add in the device type and sys_boot fields (see above) */
if (cpu_is_omap24xx()) {
i = OMAP24XX_CONTROL_STATUS;
} else if (cpu_is_omap343x()) {
i = OMAP343X_CONTROL_STATUS;
} else {
printk(KERN_ERR "id: unknown CPU type\n");
BUG();
}
ctrl_status = omap_ctrl_readl(i);
system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
OMAP2_SYSBOOT_4_MASK |
OMAP2_SYSBOOT_3_MASK |
OMAP2_SYSBOOT_2_MASK |
OMAP2_SYSBOOT_1_MASK |
OMAP2_SYSBOOT_0_MASK));
system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
}
/*
* _set_omap_chip - set the omap_chip global based on OMAP chip type
*
* Build the omap_chip bits. This variable is used by powerdomain and
* clockdomain code to indicate whether structures are applicable for
* the current OMAP chip type by ANDing it against a 'platform' bitfield
* in the structure.
*/
static void __init _set_omap_chip(void)
{
if (cpu_is_omap343x()) {
omap_chip.oc = CHIP_IS_OMAP3430;
if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
} else if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
} else {
/* Current CPU not supported by this code. */
printk(KERN_WARNING "OMAP chip type code does not yet support "
"this CPU type.\n");
WARN_ON(1);
}
}
void __init omap2_check_revision(void)
{
int i, j;
u32 idcode;
u32 prod_id;
u16 hawkeye;
u8 dev_type;
u8 rev;
idcode = read_tap_reg(OMAP_TAP_IDCODE);
prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0x0f;
dev_type = (prod_id >> 16) & 0x0f;
pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_0));
pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
read_tap_reg(OMAP_TAP_DIE_ID_1),
(read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_2));
pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_3));
pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
prod_id, dev_type);
/*
* Detection for 34xx ES2.0 and above can be done with just
* hawkeye and rev. See TRM 1.5.2 Device Identification.
* Note that rev cannot be used directly as ES1.0 uses value 0.
*/
if (hawkeye == 0xb7ae) {
system_rev = 0x34300000 | ((1 + rev) << 12);
pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
_set_omap_chip();
return;
}
/* Check hawkeye ids */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (hawkeye == omap_ids[i].hawkeye)
break;
}
if (i == ARRAY_SIZE(omap_ids)) {
printk(KERN_ERR "Unknown OMAP CPU id\n");
return;
}
for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
if (dev_type == omap_ids[j].dev)
break;
}
if (j == ARRAY_SIZE(omap_ids)) {
printk(KERN_ERR "Unknown OMAP device type. "
"Handling it as OMAP%04x\n",
omap_ids[i].type >> 16);
j = i;
}
_set_system_rev(omap_ids[j].type, rev);
_set_omap_chip();
pr_info("OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0x0f)
pr_info("ES%x", (system_rev >> 12) & 0xf);
pr_info("\n");
}
View git blame Copy permalink