alistair23-linux/include/linux/compiler.h
Linus Torvalds f0c98ebc57 libnvdimm for 4.8
1/ Replace pcommit with ADR / directed-flushing:
    The pcommit instruction, which has not shipped on any product, is
    deprecated. Instead, the requirement is that platforms implement either
    ADR, or provide one or more flush addresses per nvdimm. ADR
    (Asynchronous DRAM Refresh) flushes data in posted write buffers to the
    memory controller on a power-fail event. Flush addresses are defined in
    ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
    "Flush Hint Address Structure". A flush hint is an mmio address that
    when written and fenced assures that all previous posted writes
    targeting a given dimm have been flushed to media.
 
 2/ On-demand ARS (address range scrub):
    Linux uses the results of the ACPI ARS commands to track bad blocks
    in pmem devices.  When latent errors are detected we re-scrub the media
    to refresh the bad block list, userspace can also request a re-scrub at
    any time.
 
 3/ Support for the Microsoft DSM (device specific method) command format.
 
 4/ Support for EDK2/OVMF virtual disk device memory ranges.
 
 5/ Various fixes and cleanups across the subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmXBsAAoJEB7SkWpmfYgCEwwP/1IOt9ocP+iHLMDH9KE7VaTZ
 NmUDR+Zy6g5cRQM7SgcuU5BXUcx+OsSrSrUTVF1cW994o9Gbz1mFotkv0ZAsPcYY
 ZVRQxo2oqHrssyOcg+PsgKWiXn68rJOCgmpEyzaJywl5qTMst7pzsT1s1f7rSh6h
 trCf4VaJJwxZR8fARGtlHUnnhPe2Orp99EZRKEWprAsIv2kPuWpPHSjRjuEgN1JG
 KW8AYwWqFTtiLRUk86I4KBB0wcDrfctsjgN9Ogd6+aHyQBRnVSr2U+vDCFkC8KLu
 qiDCpYp+yyxBjclnljz7tRRT3GtzfCUWd4v2KVWqgg2IaobUc0Lbukp/rmikUXQP
 WLikT2OCQ994eFK5OX3Q3cIU/4j459TQnof8q14yVSpjAKrNUXVSR5puN7Hxa+V7
 41wKrAsnsyY1oq+Yd/rMR8VfH7PHx3bFkrmRCGZCufLX1UQm4aYj+sWagDKiV3yA
 DiudghbOnhfurfGsnXUVw7y7GKs+gNWNBmB6ndAD6ZEHmKoGUhAEbJDLCc3DnANl
 b/2mv1MIdIcC1DlCmnbbcn6fv6bICe/r8poK3VrCK3UgOq/EOvKIWl7giP+k1JuC
 6DdVYhlNYIVFXUNSLFAwz8OkLu8byx7WDm36iEqrKHtPw+8qa/2bWVgOU6OBgpjV
 cN3edFVIdxvZeMgM5Ubq
 =xCBG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move ->module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...
2016-07-28 17:38:16 -07:00

550 lines
16 KiB
C

#ifndef __LINUX_COMPILER_H
#define __LINUX_COMPILER_H
#ifndef __ASSEMBLY__
#ifdef __CHECKER__
# define __user __attribute__((noderef, address_space(1)))
# define __kernel __attribute__((address_space(0)))
# define __safe __attribute__((safe))
# define __force __attribute__((force))
# define __nocast __attribute__((nocast))
# define __iomem __attribute__((noderef, address_space(2)))
# define __must_hold(x) __attribute__((context(x,1,1)))
# define __acquires(x) __attribute__((context(x,0,1)))
# define __releases(x) __attribute__((context(x,1,0)))
# define __acquire(x) __context__(x,1)
# define __release(x) __context__(x,-1)
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
# define __percpu __attribute__((noderef, address_space(3)))
#ifdef CONFIG_SPARSE_RCU_POINTER
# define __rcu __attribute__((noderef, address_space(4)))
#else /* CONFIG_SPARSE_RCU_POINTER */
# define __rcu
#endif /* CONFIG_SPARSE_RCU_POINTER */
# define __private __attribute__((noderef))
extern void __chk_user_ptr(const volatile void __user *);
extern void __chk_io_ptr(const volatile void __iomem *);
# define ACCESS_PRIVATE(p, member) (*((typeof((p)->member) __force *) &(p)->member))
#else /* __CHECKER__ */
# define __user
# define __kernel
# define __safe
# define __force
# define __nocast
# define __iomem
# define __chk_user_ptr(x) (void)0
# define __chk_io_ptr(x) (void)0
# define __builtin_warning(x, y...) (1)
# define __must_hold(x)
# define __acquires(x)
# define __releases(x)
# define __acquire(x) (void)0
# define __release(x) (void)0
# define __cond_lock(x,c) (c)
# define __percpu
# define __rcu
# define __private
# define ACCESS_PRIVATE(p, member) ((p)->member)
#endif /* __CHECKER__ */
/* Indirect macros required for expanded argument pasting, eg. __LINE__. */
#define ___PASTE(a,b) a##b
#define __PASTE(a,b) ___PASTE(a,b)
#ifdef __KERNEL__
#ifdef __GNUC__
#include <linux/compiler-gcc.h>
#endif
#if defined(CC_USING_HOTPATCH) && !defined(__CHECKER__)
#define notrace __attribute__((hotpatch(0,0)))
#else
#define notrace __attribute__((no_instrument_function))
#endif
/* Intel compiler defines __GNUC__. So we will overwrite implementations
* coming from above header files here
*/
#ifdef __INTEL_COMPILER
# include <linux/compiler-intel.h>
#endif
/* Clang compiler defines __GNUC__. So we will overwrite implementations
* coming from above header files here
*/
#ifdef __clang__
#include <linux/compiler-clang.h>
#endif
/*
* Generic compiler-dependent macros required for kernel
* build go below this comment. Actual compiler/compiler version
* specific implementations come from the above header files
*/
struct ftrace_branch_data {
const char *func;
const char *file;
unsigned line;
union {
struct {
unsigned long correct;
unsigned long incorrect;
};
struct {
unsigned long miss;
unsigned long hit;
};
unsigned long miss_hit[2];
};
};
/*
* Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code
* to disable branch tracing on a per file basis.
*/
#if defined(CONFIG_TRACE_BRANCH_PROFILING) \
&& !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__)
void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
#define likely_notrace(x) __builtin_expect(!!(x), 1)
#define unlikely_notrace(x) __builtin_expect(!!(x), 0)
#define __branch_check__(x, expect) ({ \
int ______r; \
static struct ftrace_branch_data \
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_annotated_branch"))) \
______f = { \
.func = __func__, \
.file = __FILE__, \
.line = __LINE__, \
}; \
______r = likely_notrace(x); \
ftrace_likely_update(&______f, ______r, expect); \
______r; \
})
/*
* Using __builtin_constant_p(x) to ignore cases where the return
* value is always the same. This idea is taken from a similar patch
* written by Daniel Walker.
*/
# ifndef likely
# define likely(x) (__builtin_constant_p(x) ? !!(x) : __branch_check__(x, 1))
# endif
# ifndef unlikely
# define unlikely(x) (__builtin_constant_p(x) ? !!(x) : __branch_check__(x, 0))
# endif
#ifdef CONFIG_PROFILE_ALL_BRANCHES
/*
* "Define 'is'", Bill Clinton
* "Define 'if'", Steven Rostedt
*/
#define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) )
#define __trace_if(cond) \
if (__builtin_constant_p(!!(cond)) ? !!(cond) : \
({ \
int ______r; \
static struct ftrace_branch_data \
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_branch"))) \
______f = { \
.func = __func__, \
.file = __FILE__, \
.line = __LINE__, \
}; \
______r = !!(cond); \
______f.miss_hit[______r]++; \
______r; \
}))
#endif /* CONFIG_PROFILE_ALL_BRANCHES */
#else
# define likely(x) __builtin_expect(!!(x), 1)
# define unlikely(x) __builtin_expect(!!(x), 0)
#endif
/* Optimization barrier */
#ifndef barrier
# define barrier() __memory_barrier()
#endif
#ifndef barrier_data
# define barrier_data(ptr) barrier()
#endif
/* Unreachable code */
#ifndef unreachable
# define unreachable() do { } while (1)
#endif
#ifndef RELOC_HIDE
# define RELOC_HIDE(ptr, off) \
({ unsigned long __ptr; \
__ptr = (unsigned long) (ptr); \
(typeof(ptr)) (__ptr + (off)); })
#endif
#ifndef OPTIMIZER_HIDE_VAR
#define OPTIMIZER_HIDE_VAR(var) barrier()
#endif
/* Not-quite-unique ID. */
#ifndef __UNIQUE_ID
# define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__)
#endif
#include <uapi/linux/types.h>
#define __READ_ONCE_SIZE \
({ \
switch (size) { \
case 1: *(__u8 *)res = *(volatile __u8 *)p; break; \
case 2: *(__u16 *)res = *(volatile __u16 *)p; break; \
case 4: *(__u32 *)res = *(volatile __u32 *)p; break; \
case 8: *(__u64 *)res = *(volatile __u64 *)p; break; \
default: \
barrier(); \
__builtin_memcpy((void *)res, (const void *)p, size); \
barrier(); \
} \
})
static __always_inline
void __read_once_size(const volatile void *p, void *res, int size)
{
__READ_ONCE_SIZE;
}
#ifdef CONFIG_KASAN
/*
* This function is not 'inline' because __no_sanitize_address confilcts
* with inlining. Attempt to inline it may cause a build failure.
* https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
* '__maybe_unused' allows us to avoid defined-but-not-used warnings.
*/
static __no_sanitize_address __maybe_unused
void __read_once_size_nocheck(const volatile void *p, void *res, int size)
{
__READ_ONCE_SIZE;
}
#else
static __always_inline
void __read_once_size_nocheck(const volatile void *p, void *res, int size)
{
__READ_ONCE_SIZE;
}
#endif
static __always_inline void __write_once_size(volatile void *p, void *res, int size)
{
switch (size) {
case 1: *(volatile __u8 *)p = *(__u8 *)res; break;
case 2: *(volatile __u16 *)p = *(__u16 *)res; break;
case 4: *(volatile __u32 *)p = *(__u32 *)res; break;
case 8: *(volatile __u64 *)p = *(__u64 *)res; break;
default:
barrier();
__builtin_memcpy((void *)p, (const void *)res, size);
barrier();
}
}
/*
* Prevent the compiler from merging or refetching reads or writes. The
* compiler is also forbidden from reordering successive instances of
* READ_ONCE, WRITE_ONCE and ACCESS_ONCE (see below), but only when the
* compiler is aware of some particular ordering. One way to make the
* compiler aware of ordering is to put the two invocations of READ_ONCE,
* WRITE_ONCE or ACCESS_ONCE() in different C statements.
*
* In contrast to ACCESS_ONCE these two macros will also work on aggregate
* data types like structs or unions. If the size of the accessed data
* type exceeds the word size of the machine (e.g., 32 bits or 64 bits)
* READ_ONCE() and WRITE_ONCE() will fall back to memcpy(). There's at
* least two memcpy()s: one for the __builtin_memcpy() and then one for
* the macro doing the copy of variable - '__u' allocated on the stack.
*
* Their two major use cases are: (1) Mediating communication between
* process-level code and irq/NMI handlers, all running on the same CPU,
* and (2) Ensuring that the compiler does not fold, spindle, or otherwise
* mutilate accesses that either do not require ordering or that interact
* with an explicit memory barrier or atomic instruction that provides the
* required ordering.
*/
#define __READ_ONCE(x, check) \
({ \
union { typeof(x) __val; char __c[1]; } __u; \
if (check) \
__read_once_size(&(x), __u.__c, sizeof(x)); \
else \
__read_once_size_nocheck(&(x), __u.__c, sizeof(x)); \
__u.__val; \
})
#define READ_ONCE(x) __READ_ONCE(x, 1)
/*
* Use READ_ONCE_NOCHECK() instead of READ_ONCE() if you need
* to hide memory access from KASAN.
*/
#define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0)
#define WRITE_ONCE(x, val) \
({ \
union { typeof(x) __val; char __c[1]; } __u = \
{ .__val = (__force typeof(x)) (val) }; \
__write_once_size(&(x), __u.__c, sizeof(x)); \
__u.__val; \
})
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#ifdef __KERNEL__
/*
* Allow us to mark functions as 'deprecated' and have gcc emit a nice
* warning for each use, in hopes of speeding the functions removal.
* Usage is:
* int __deprecated foo(void)
*/
#ifndef __deprecated
# define __deprecated /* unimplemented */
#endif
#ifdef MODULE
#define __deprecated_for_modules __deprecated
#else
#define __deprecated_for_modules
#endif
#ifndef __must_check
#define __must_check
#endif
#ifndef CONFIG_ENABLE_MUST_CHECK
#undef __must_check
#define __must_check
#endif
#ifndef CONFIG_ENABLE_WARN_DEPRECATED
#undef __deprecated
#undef __deprecated_for_modules
#define __deprecated
#define __deprecated_for_modules
#endif
#ifndef __malloc
#define __malloc
#endif
/*
* Allow us to avoid 'defined but not used' warnings on functions and data,
* as well as force them to be emitted to the assembly file.
*
* As of gcc 3.4, static functions that are not marked with attribute((used))
* may be elided from the assembly file. As of gcc 3.4, static data not so
* marked will not be elided, but this may change in a future gcc version.
*
* NOTE: Because distributions shipped with a backported unit-at-a-time
* compiler in gcc 3.3, we must define __used to be __attribute__((used))
* for gcc >=3.3 instead of 3.4.
*
* In prior versions of gcc, such functions and data would be emitted, but
* would be warned about except with attribute((unused)).
*
* Mark functions that are referenced only in inline assembly as __used so
* the code is emitted even though it appears to be unreferenced.
*/
#ifndef __used
# define __used /* unimplemented */
#endif
#ifndef __maybe_unused
# define __maybe_unused /* unimplemented */
#endif
#ifndef __always_unused
# define __always_unused /* unimplemented */
#endif
#ifndef noinline
#define noinline
#endif
/*
* Rather then using noinline to prevent stack consumption, use
* noinline_for_stack instead. For documentation reasons.
*/
#define noinline_for_stack noinline
#ifndef __always_inline
#define __always_inline inline
#endif
#endif /* __KERNEL__ */
/*
* From the GCC manual:
*
* Many functions do not examine any values except their arguments,
* and have no effects except the return value. Basically this is
* just slightly more strict class than the `pure' attribute above,
* since function is not allowed to read global memory.
*
* Note that a function that has pointer arguments and examines the
* data pointed to must _not_ be declared `const'. Likewise, a
* function that calls a non-`const' function usually must not be
* `const'. It does not make sense for a `const' function to return
* `void'.
*/
#ifndef __attribute_const__
# define __attribute_const__ /* unimplemented */
#endif
/*
* Tell gcc if a function is cold. The compiler will assume any path
* directly leading to the call is unlikely.
*/
#ifndef __cold
#define __cold
#endif
/* Simple shorthand for a section definition */
#ifndef __section
# define __section(S) __attribute__ ((__section__(#S)))
#endif
#ifndef __visible
#define __visible
#endif
/*
* Assume alignment of return value.
*/
#ifndef __assume_aligned
#define __assume_aligned(a, ...)
#endif
/* Are two types/vars the same type (ignoring qualifiers)? */
#ifndef __same_type
# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
#endif
/* Is this type a native word size -- useful for atomic operations */
#ifndef __native_word
# define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
#endif
/* Compile time object size, -1 for unknown */
#ifndef __compiletime_object_size
# define __compiletime_object_size(obj) -1
#endif
#ifndef __compiletime_warning
# define __compiletime_warning(message)
#endif
#ifndef __compiletime_error
# define __compiletime_error(message)
/*
* Sparse complains of variable sized arrays due to the temporary variable in
* __compiletime_assert. Unfortunately we can't just expand it out to make
* sparse see a constant array size without breaking compiletime_assert on old
* versions of GCC (e.g. 4.2.4), so hide the array from sparse altogether.
*/
# ifndef __CHECKER__
# define __compiletime_error_fallback(condition) \
do { ((void)sizeof(char[1 - 2 * condition])); } while (0)
# endif
#endif
#ifndef __compiletime_error_fallback
# define __compiletime_error_fallback(condition) do { } while (0)
#endif
#define __compiletime_assert(condition, msg, prefix, suffix) \
do { \
bool __cond = !(condition); \
extern void prefix ## suffix(void) __compiletime_error(msg); \
if (__cond) \
prefix ## suffix(); \
__compiletime_error_fallback(__cond); \
} while (0)
#define _compiletime_assert(condition, msg, prefix, suffix) \
__compiletime_assert(condition, msg, prefix, suffix)
/**
* compiletime_assert - break build and emit msg if condition is false
* @condition: a compile-time constant condition to check
* @msg: a message to emit if condition is false
*
* In tradition of POSIX assert, this macro will break the build if the
* supplied condition is *false*, emitting the supplied error message if the
* compiler has support to do so.
*/
#define compiletime_assert(condition, msg) \
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
#define compiletime_assert_atomic_type(t) \
compiletime_assert(__native_word(t), \
"Need native word sized stores/loads for atomicity.")
/*
* Prevent the compiler from merging or refetching accesses. The compiler
* is also forbidden from reordering successive instances of ACCESS_ONCE(),
* but only when the compiler is aware of some particular ordering. One way
* to make the compiler aware of ordering is to put the two invocations of
* ACCESS_ONCE() in different C statements.
*
* ACCESS_ONCE will only work on scalar types. For union types, ACCESS_ONCE
* on a union member will work as long as the size of the member matches the
* size of the union and the size is smaller than word size.
*
* The major use cases of ACCESS_ONCE used to be (1) Mediating communication
* between process-level code and irq/NMI handlers, all running on the same CPU,
* and (2) Ensuring that the compiler does not fold, spindle, or otherwise
* mutilate accesses that either do not require ordering or that interact
* with an explicit memory barrier or atomic instruction that provides the
* required ordering.
*
* If possible use READ_ONCE()/WRITE_ONCE() instead.
*/
#define __ACCESS_ONCE(x) ({ \
__maybe_unused typeof(x) __var = (__force typeof(x)) 0; \
(volatile typeof(x) *)&(x); })
#define ACCESS_ONCE(x) (*__ACCESS_ONCE(x))
/**
* lockless_dereference() - safely load a pointer for later dereference
* @p: The pointer to load
*
* Similar to rcu_dereference(), but for situations where the pointed-to
* object's lifetime is managed by something other than RCU. That
* "something other" might be reference counting or simple immortality.
*
* The seemingly unused void * variable is to validate @p is indeed a pointer
* type. All pointer types silently cast to void *.
*/
#define lockless_dereference(p) \
({ \
typeof(p) _________p1 = READ_ONCE(p); \
__maybe_unused const void * const _________p2 = _________p1; \
smp_read_barrier_depends(); /* Dependency order vs. p above. */ \
(_________p1); \
})
/* Ignore/forbid kprobes attach on very low level functions marked by this attribute: */
#ifdef CONFIG_KPROBES
# define __kprobes __attribute__((__section__(".kprobes.text")))
# define nokprobe_inline __always_inline
#else
# define __kprobes
# define nokprobe_inline inline
#endif
#endif /* __LINUX_COMPILER_H */