![Stephen Kitt](/assets/img/avatar_default.png)
Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. A few drivers aren't included in this patch because they have a different set of maintainers. They will be covered by other patches. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
257 lines
6.6 KiB
C
257 lines
6.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* ds620.c - Support for temperature sensor and thermostat DS620
|
|
*
|
|
* Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
|
|
*
|
|
* based on ds1621.c by Christian W. Zuckschwerdt <zany@triq.net>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/platform_data/ds620.h>
|
|
|
|
/*
|
|
* Many DS620 constants specified below
|
|
* 15 14 13 12 11 10 09 08
|
|
* |Done|NVB |THF |TLF |R1 |R0 |AUTOC|1SHOT|
|
|
*
|
|
* 07 06 05 04 03 02 01 00
|
|
* |PO2 |PO1 |A2 |A1 |A0 | | | |
|
|
*/
|
|
#define DS620_REG_CONFIG_DONE 0x8000
|
|
#define DS620_REG_CONFIG_NVB 0x4000
|
|
#define DS620_REG_CONFIG_THF 0x2000
|
|
#define DS620_REG_CONFIG_TLF 0x1000
|
|
#define DS620_REG_CONFIG_R1 0x0800
|
|
#define DS620_REG_CONFIG_R0 0x0400
|
|
#define DS620_REG_CONFIG_AUTOC 0x0200
|
|
#define DS620_REG_CONFIG_1SHOT 0x0100
|
|
#define DS620_REG_CONFIG_PO2 0x0080
|
|
#define DS620_REG_CONFIG_PO1 0x0040
|
|
#define DS620_REG_CONFIG_A2 0x0020
|
|
#define DS620_REG_CONFIG_A1 0x0010
|
|
#define DS620_REG_CONFIG_A0 0x0008
|
|
|
|
/* The DS620 registers */
|
|
static const u8 DS620_REG_TEMP[3] = {
|
|
0xAA, /* input, word, RO */
|
|
0xA2, /* min, word, RW */
|
|
0xA0, /* max, word, RW */
|
|
};
|
|
|
|
#define DS620_REG_CONF 0xAC /* word, RW */
|
|
#define DS620_COM_START 0x51 /* no data */
|
|
#define DS620_COM_STOP 0x22 /* no data */
|
|
|
|
/* Each client has this additional data */
|
|
struct ds620_data {
|
|
struct i2c_client *client;
|
|
struct mutex update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
s16 temp[3]; /* Register values, word */
|
|
};
|
|
|
|
static void ds620_init_client(struct i2c_client *client)
|
|
{
|
|
struct ds620_platform_data *ds620_info = dev_get_platdata(&client->dev);
|
|
u16 conf, new_conf;
|
|
|
|
new_conf = conf =
|
|
i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
|
|
|
|
/* switch to continuous conversion mode */
|
|
new_conf &= ~DS620_REG_CONFIG_1SHOT;
|
|
/* already high at power-on, but don't trust the BIOS! */
|
|
new_conf |= DS620_REG_CONFIG_PO2;
|
|
/* thermostat mode according to platform data */
|
|
if (ds620_info && ds620_info->pomode == 1)
|
|
new_conf &= ~DS620_REG_CONFIG_PO1; /* PO_LOW */
|
|
else if (ds620_info && ds620_info->pomode == 2)
|
|
new_conf |= DS620_REG_CONFIG_PO1; /* PO_HIGH */
|
|
else
|
|
new_conf &= ~DS620_REG_CONFIG_PO2; /* always low */
|
|
/* with highest precision */
|
|
new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;
|
|
|
|
if (conf != new_conf)
|
|
i2c_smbus_write_word_swapped(client, DS620_REG_CONF, new_conf);
|
|
|
|
/* start conversion */
|
|
i2c_smbus_write_byte(client, DS620_COM_START);
|
|
}
|
|
|
|
static struct ds620_data *ds620_update_client(struct device *dev)
|
|
{
|
|
struct ds620_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
struct ds620_data *ret = data;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
int i;
|
|
int res;
|
|
|
|
dev_dbg(&client->dev, "Starting ds620 update\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
|
|
res = i2c_smbus_read_word_swapped(client,
|
|
DS620_REG_TEMP[i]);
|
|
if (res < 0) {
|
|
ret = ERR_PTR(res);
|
|
goto abort;
|
|
}
|
|
|
|
data->temp[i] = res;
|
|
}
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t temp_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ds620_data *data = ds620_update_client(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
return sprintf(buf, "%d\n", ((data->temp[attr->index] / 8) * 625) / 10);
|
|
}
|
|
|
|
static ssize_t temp_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
int res;
|
|
long val;
|
|
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ds620_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
|
|
res = kstrtol(buf, 10, &val);
|
|
|
|
if (res)
|
|
return res;
|
|
|
|
val = (clamp_val(val, -128000, 128000) * 10 / 625) * 8;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp[attr->index] = val;
|
|
i2c_smbus_write_word_swapped(client, DS620_REG_TEMP[attr->index],
|
|
data->temp[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ds620_data *data = ds620_update_client(dev);
|
|
struct i2c_client *client;
|
|
u16 conf, new_conf;
|
|
int res;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
client = data->client;
|
|
|
|
/* reset alarms if necessary */
|
|
res = i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
new_conf = conf = res;
|
|
new_conf &= ~attr->index;
|
|
if (conf != new_conf) {
|
|
res = i2c_smbus_write_word_swapped(client, DS620_REG_CONF,
|
|
new_conf);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", !!(conf & attr->index));
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, DS620_REG_CONFIG_TLF);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, DS620_REG_CONFIG_THF);
|
|
|
|
static struct attribute *ds620_attrs[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
ATTRIBUTE_GROUPS(ds620);
|
|
|
|
static int ds620_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct ds620_data *data;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct ds620_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the DS620 chip */
|
|
ds620_init_client(client);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
|
data, ds620_groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ds620_id[] = {
|
|
{"ds620", 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, ds620_id);
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver ds620_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "ds620",
|
|
},
|
|
.probe_new = ds620_probe,
|
|
.id_table = ds620_id,
|
|
};
|
|
|
|
module_i2c_driver(ds620_driver);
|
|
|
|
MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
|
|
MODULE_DESCRIPTION("DS620 driver");
|
|
MODULE_LICENSE("GPL");
|