![Xu Yilun](/assets/img/avatar_default.png)
This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC chip connects to a set of sensor chips to monitor current, voltage, thermal and power of different components on board. The BMC firmware is responsible for sensor data sampling and recording in shared registers. Host driver reads the sensor data from these shared registers and exposes them to users as hwmon interfaces. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1600669071-26235-3-git-send-email-yilun.xu@intel.com [groeck: Adjusted subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
335 lines
8.2 KiB
C
335 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel MAX 10 BMC HWMON Driver
|
|
*
|
|
* Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
|
|
*
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/mfd/intel-m10-bmc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
struct m10bmc_sdata {
|
|
unsigned int reg_input;
|
|
unsigned int reg_max;
|
|
unsigned int reg_crit;
|
|
unsigned int reg_hyst;
|
|
unsigned int reg_min;
|
|
unsigned int multiplier;
|
|
const char *label;
|
|
};
|
|
|
|
struct m10bmc_hwmon_board_data {
|
|
const struct m10bmc_sdata *tables[hwmon_max];
|
|
const struct hwmon_channel_info **hinfo;
|
|
};
|
|
|
|
struct m10bmc_hwmon {
|
|
struct device *dev;
|
|
struct hwmon_chip_info chip;
|
|
char *hw_name;
|
|
struct intel_m10bmc *m10bmc;
|
|
const struct m10bmc_hwmon_board_data *bdata;
|
|
};
|
|
|
|
static const struct m10bmc_sdata n3000bmc_temp_tbl[] = {
|
|
{ 0x100, 0x104, 0x108, 0x10c, 0x0, 500, "Board Temperature" },
|
|
{ 0x110, 0x114, 0x118, 0x0, 0x0, 500, "FPGA Die Temperature" },
|
|
{ 0x11c, 0x124, 0x120, 0x0, 0x0, 500, "QSFP0 Temperature" },
|
|
{ 0x12c, 0x134, 0x130, 0x0, 0x0, 500, "QSFP1 Temperature" },
|
|
{ 0x168, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A Temperature" },
|
|
{ 0x16c, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A SerDes Temperature" },
|
|
{ 0x170, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B Temperature" },
|
|
{ 0x174, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B SerDes Temperature" },
|
|
};
|
|
|
|
static const struct m10bmc_sdata n3000bmc_in_tbl[] = {
|
|
{ 0x128, 0x0, 0x0, 0x0, 0x0, 1, "QSFP0 Supply Voltage" },
|
|
{ 0x138, 0x0, 0x0, 0x0, 0x0, 1, "QSFP1 Supply Voltage" },
|
|
{ 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage" },
|
|
{ 0x144, 0x0, 0x0, 0x0, 0x0, 1, "12V Backplane Voltage" },
|
|
{ 0x14c, 0x0, 0x0, 0x0, 0x0, 1, "1.2V Voltage" },
|
|
{ 0x150, 0x0, 0x0, 0x0, 0x0, 1, "12V AUX Voltage" },
|
|
{ 0x158, 0x0, 0x0, 0x0, 0x0, 1, "1.8V Voltage" },
|
|
{ 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "3.3V Voltage" },
|
|
};
|
|
|
|
static const struct m10bmc_sdata n3000bmc_curr_tbl[] = {
|
|
{ 0x140, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Current" },
|
|
{ 0x148, 0x0, 0x0, 0x0, 0x0, 1, "12V Backplane Current" },
|
|
{ 0x154, 0x0, 0x0, 0x0, 0x0, 1, "12V AUX Current" },
|
|
};
|
|
|
|
static const struct m10bmc_sdata n3000bmc_power_tbl[] = {
|
|
{ 0x160, 0x0, 0x0, 0x0, 0x0, 1000, "Board Power" },
|
|
};
|
|
|
|
static const struct hwmon_channel_info *n3000bmc_hinfo[] = {
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
|
|
HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
|
|
HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
|
|
HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
|
|
HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL),
|
|
HWMON_CHANNEL_INFO(in,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL),
|
|
HWMON_CHANNEL_INFO(curr,
|
|
HWMON_C_INPUT | HWMON_C_LABEL,
|
|
HWMON_C_INPUT | HWMON_C_LABEL,
|
|
HWMON_C_INPUT | HWMON_C_LABEL),
|
|
HWMON_CHANNEL_INFO(power,
|
|
HWMON_P_INPUT | HWMON_P_LABEL),
|
|
NULL
|
|
};
|
|
|
|
static const struct m10bmc_hwmon_board_data n3000bmc_hwmon_bdata = {
|
|
.tables = {
|
|
[hwmon_temp] = n3000bmc_temp_tbl,
|
|
[hwmon_in] = n3000bmc_in_tbl,
|
|
[hwmon_curr] = n3000bmc_curr_tbl,
|
|
[hwmon_power] = n3000bmc_power_tbl,
|
|
},
|
|
|
|
.hinfo = n3000bmc_hinfo,
|
|
};
|
|
|
|
static umode_t
|
|
m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
return 0444;
|
|
}
|
|
|
|
static const struct m10bmc_sdata *
|
|
find_sensor_data(struct m10bmc_hwmon *hw, enum hwmon_sensor_types type,
|
|
int channel)
|
|
{
|
|
const struct m10bmc_sdata *tbl;
|
|
|
|
tbl = hw->bdata->tables[type];
|
|
if (!tbl)
|
|
return ERR_PTR(-EOPNOTSUPP);
|
|
|
|
return &tbl[channel];
|
|
}
|
|
|
|
static int do_sensor_read(struct m10bmc_hwmon *hw,
|
|
const struct m10bmc_sdata *data,
|
|
unsigned int regoff, long *val)
|
|
{
|
|
unsigned int regval;
|
|
int ret;
|
|
|
|
ret = m10bmc_sys_read(hw->m10bmc, regoff, ®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* BMC Firmware will return 0xdeadbeef if the sensor value is invalid
|
|
* at that time. This usually happens on sensor channels which connect
|
|
* to external pluggable modules, e.g. QSFP temperature and voltage.
|
|
* When the QSFP is unplugged from cage, driver will get 0xdeadbeef
|
|
* from their registers.
|
|
*/
|
|
if (regval == 0xdeadbeef)
|
|
return -ENODATA;
|
|
|
|
*val = regval * data->multiplier;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m10bmc_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct m10bmc_hwmon *hw = dev_get_drvdata(dev);
|
|
unsigned int reg = 0, reg_hyst = 0;
|
|
const struct m10bmc_sdata *data;
|
|
long hyst, value;
|
|
int ret;
|
|
|
|
data = find_sensor_data(hw, type, channel);
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
reg = data->reg_input;
|
|
break;
|
|
case hwmon_temp_max_hyst:
|
|
reg_hyst = data->reg_hyst;
|
|
fallthrough;
|
|
case hwmon_temp_max:
|
|
reg = data->reg_max;
|
|
break;
|
|
case hwmon_temp_crit_hyst:
|
|
reg_hyst = data->reg_hyst;
|
|
fallthrough;
|
|
case hwmon_temp_crit:
|
|
reg = data->reg_crit;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_in:
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
reg = data->reg_input;
|
|
break;
|
|
case hwmon_in_max:
|
|
reg = data->reg_max;
|
|
break;
|
|
case hwmon_in_crit:
|
|
reg = data->reg_crit;
|
|
break;
|
|
case hwmon_in_min:
|
|
reg = data->reg_min;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
reg = data->reg_input;
|
|
break;
|
|
case hwmon_curr_max:
|
|
reg = data->reg_max;
|
|
break;
|
|
case hwmon_curr_crit:
|
|
reg = data->reg_crit;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_power:
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
reg = data->reg_input;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (!reg)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = do_sensor_read(hw, data, reg, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reg_hyst) {
|
|
ret = do_sensor_read(hw, data, reg_hyst, &hyst);
|
|
if (ret)
|
|
return ret;
|
|
|
|
value -= hyst;
|
|
}
|
|
|
|
*val = value;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m10bmc_hwmon_read_string(struct device *dev,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel, const char **str)
|
|
{
|
|
struct m10bmc_hwmon *hw = dev_get_drvdata(dev);
|
|
const struct m10bmc_sdata *data;
|
|
|
|
data = find_sensor_data(hw, type, channel);
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
*str = data->label;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct hwmon_ops m10bmc_hwmon_ops = {
|
|
.is_visible = m10bmc_hwmon_is_visible,
|
|
.read = m10bmc_hwmon_read,
|
|
.read_string = m10bmc_hwmon_read_string,
|
|
};
|
|
|
|
static int m10bmc_hwmon_probe(struct platform_device *pdev)
|
|
{
|
|
const struct platform_device_id *id = platform_get_device_id(pdev);
|
|
struct intel_m10bmc *m10bmc = dev_get_drvdata(pdev->dev.parent);
|
|
struct device *hwmon_dev, *dev = &pdev->dev;
|
|
struct m10bmc_hwmon *hw;
|
|
int i;
|
|
|
|
hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
|
|
if (!hw)
|
|
return -ENOMEM;
|
|
|
|
hw->dev = dev;
|
|
hw->m10bmc = m10bmc;
|
|
hw->bdata = (const struct m10bmc_hwmon_board_data *)id->driver_data;
|
|
|
|
hw->chip.info = hw->bdata->hinfo;
|
|
hw->chip.ops = &m10bmc_hwmon_ops;
|
|
|
|
hw->hw_name = devm_kstrdup(dev, id->name, GFP_KERNEL);
|
|
if (!hw->hw_name)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; hw->hw_name[i]; i++)
|
|
if (hwmon_is_bad_char(hw->hw_name[i]))
|
|
hw->hw_name[i] = '_';
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, hw->hw_name,
|
|
hw, &hw->chip, NULL);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
|
|
{
|
|
.name = "n3000bmc-hwmon",
|
|
.driver_data = (unsigned long)&n3000bmc_hwmon_bdata,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver intel_m10bmc_hwmon_driver = {
|
|
.probe = m10bmc_hwmon_probe,
|
|
.driver = {
|
|
.name = "intel-m10-bmc-hwmon",
|
|
},
|
|
.id_table = intel_m10bmc_hwmon_ids,
|
|
};
|
|
module_platform_driver(intel_m10bmc_hwmon_driver);
|
|
|
|
MODULE_DEVICE_TABLE(platform, intel_m10bmc_hwmon_ids);
|
|
MODULE_AUTHOR("Intel Corporation");
|
|
MODULE_DESCRIPTION("Intel MAX 10 BMC hardware monitor");
|
|
MODULE_LICENSE("GPL");
|