![Krzysztof Kozlowski](/assets/img/avatar_default.png)
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
336 lines
8.7 KiB
C
336 lines
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2017-2018 SiFive
|
|
* For SiFive's PWM IP block documentation please refer Chapter 14 of
|
|
* Reference Manual : https://static.dev.sifive.com/FU540-C000-v1.0.pdf
|
|
*
|
|
* Limitations:
|
|
* - When changing both duty cycle and period, we cannot prevent in
|
|
* software that the output might produce a period with mixed
|
|
* settings (new period length and old duty cycle).
|
|
* - The hardware cannot generate a 100% duty cycle.
|
|
* - The hardware generates only inverted output.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
/* Register offsets */
|
|
#define PWM_SIFIVE_PWMCFG 0x0
|
|
#define PWM_SIFIVE_PWMCOUNT 0x8
|
|
#define PWM_SIFIVE_PWMS 0x10
|
|
#define PWM_SIFIVE_PWMCMP0 0x20
|
|
|
|
/* PWMCFG fields */
|
|
#define PWM_SIFIVE_PWMCFG_SCALE GENMASK(3, 0)
|
|
#define PWM_SIFIVE_PWMCFG_STICKY BIT(8)
|
|
#define PWM_SIFIVE_PWMCFG_ZERO_CMP BIT(9)
|
|
#define PWM_SIFIVE_PWMCFG_DEGLITCH BIT(10)
|
|
#define PWM_SIFIVE_PWMCFG_EN_ALWAYS BIT(12)
|
|
#define PWM_SIFIVE_PWMCFG_EN_ONCE BIT(13)
|
|
#define PWM_SIFIVE_PWMCFG_CENTER BIT(16)
|
|
#define PWM_SIFIVE_PWMCFG_GANG BIT(24)
|
|
#define PWM_SIFIVE_PWMCFG_IP BIT(28)
|
|
|
|
/* PWM_SIFIVE_SIZE_PWMCMP is used to calculate offset for pwmcmpX registers */
|
|
#define PWM_SIFIVE_SIZE_PWMCMP 4
|
|
#define PWM_SIFIVE_CMPWIDTH 16
|
|
#define PWM_SIFIVE_DEFAULT_PERIOD 10000000
|
|
|
|
struct pwm_sifive_ddata {
|
|
struct pwm_chip chip;
|
|
struct mutex lock; /* lock to protect user_count */
|
|
struct notifier_block notifier;
|
|
struct clk *clk;
|
|
void __iomem *regs;
|
|
unsigned int real_period;
|
|
unsigned int approx_period;
|
|
int user_count;
|
|
};
|
|
|
|
static inline
|
|
struct pwm_sifive_ddata *pwm_sifive_chip_to_ddata(struct pwm_chip *c)
|
|
{
|
|
return container_of(c, struct pwm_sifive_ddata, chip);
|
|
}
|
|
|
|
static int pwm_sifive_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
|
|
|
|
mutex_lock(&ddata->lock);
|
|
ddata->user_count++;
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pwm_sifive_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
|
|
|
|
mutex_lock(&ddata->lock);
|
|
ddata->user_count--;
|
|
mutex_unlock(&ddata->lock);
|
|
}
|
|
|
|
static void pwm_sifive_update_clock(struct pwm_sifive_ddata *ddata,
|
|
unsigned long rate)
|
|
{
|
|
unsigned long long num;
|
|
unsigned long scale_pow;
|
|
int scale;
|
|
u32 val;
|
|
/*
|
|
* The PWM unit is used with pwmzerocmp=0, so the only way to modify the
|
|
* period length is using pwmscale which provides the number of bits the
|
|
* counter is shifted before being feed to the comparators. A period
|
|
* lasts (1 << (PWM_SIFIVE_CMPWIDTH + pwmscale)) clock ticks.
|
|
* (1 << (PWM_SIFIVE_CMPWIDTH + scale)) * 10^9/rate = period
|
|
*/
|
|
scale_pow = div64_ul(ddata->approx_period * (u64)rate, NSEC_PER_SEC);
|
|
scale = clamp(ilog2(scale_pow) - PWM_SIFIVE_CMPWIDTH, 0, 0xf);
|
|
|
|
val = PWM_SIFIVE_PWMCFG_EN_ALWAYS |
|
|
FIELD_PREP(PWM_SIFIVE_PWMCFG_SCALE, scale);
|
|
writel(val, ddata->regs + PWM_SIFIVE_PWMCFG);
|
|
|
|
/* As scale <= 15 the shift operation cannot overflow. */
|
|
num = (unsigned long long)NSEC_PER_SEC << (PWM_SIFIVE_CMPWIDTH + scale);
|
|
ddata->real_period = div64_ul(num, rate);
|
|
dev_dbg(ddata->chip.dev,
|
|
"New real_period = %u ns\n", ddata->real_period);
|
|
}
|
|
|
|
static void pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
|
|
u32 duty, val;
|
|
|
|
duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP0 +
|
|
pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
|
|
|
|
state->enabled = duty > 0;
|
|
|
|
val = readl(ddata->regs + PWM_SIFIVE_PWMCFG);
|
|
if (!(val & PWM_SIFIVE_PWMCFG_EN_ALWAYS))
|
|
state->enabled = false;
|
|
|
|
state->period = ddata->real_period;
|
|
state->duty_cycle =
|
|
(u64)duty * ddata->real_period >> PWM_SIFIVE_CMPWIDTH;
|
|
state->polarity = PWM_POLARITY_INVERSED;
|
|
}
|
|
|
|
static int pwm_sifive_enable(struct pwm_chip *chip, bool enable)
|
|
{
|
|
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
|
|
int ret;
|
|
|
|
if (enable) {
|
|
ret = clk_enable(ddata->clk);
|
|
if (ret) {
|
|
dev_err(ddata->chip.dev, "Enable clk failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (!enable)
|
|
clk_disable(ddata->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
|
|
struct pwm_state cur_state;
|
|
unsigned int duty_cycle;
|
|
unsigned long long num;
|
|
bool enabled;
|
|
int ret = 0;
|
|
u32 frac;
|
|
|
|
if (state->polarity != PWM_POLARITY_INVERSED)
|
|
return -EINVAL;
|
|
|
|
ret = clk_enable(ddata->clk);
|
|
if (ret) {
|
|
dev_err(ddata->chip.dev, "Enable clk failed\n");
|
|
return ret;
|
|
}
|
|
|
|
mutex_lock(&ddata->lock);
|
|
cur_state = pwm->state;
|
|
enabled = cur_state.enabled;
|
|
|
|
duty_cycle = state->duty_cycle;
|
|
if (!state->enabled)
|
|
duty_cycle = 0;
|
|
|
|
/*
|
|
* The problem of output producing mixed setting as mentioned at top,
|
|
* occurs here. To minimize the window for this problem, we are
|
|
* calculating the register values first and then writing them
|
|
* consecutively
|
|
*/
|
|
num = (u64)duty_cycle * (1U << PWM_SIFIVE_CMPWIDTH);
|
|
frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
|
|
/* The hardware cannot generate a 100% duty cycle */
|
|
frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
|
|
|
|
if (state->period != ddata->approx_period) {
|
|
if (ddata->user_count != 1) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
ddata->approx_period = state->period;
|
|
pwm_sifive_update_clock(ddata, clk_get_rate(ddata->clk));
|
|
}
|
|
|
|
writel(frac, ddata->regs + PWM_SIFIVE_PWMCMP0 +
|
|
pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
|
|
|
|
if (state->enabled != enabled)
|
|
pwm_sifive_enable(chip, state->enabled);
|
|
|
|
exit:
|
|
clk_disable(ddata->clk);
|
|
mutex_unlock(&ddata->lock);
|
|
return ret;
|
|
}
|
|
|
|
static const struct pwm_ops pwm_sifive_ops = {
|
|
.request = pwm_sifive_request,
|
|
.free = pwm_sifive_free,
|
|
.get_state = pwm_sifive_get_state,
|
|
.apply = pwm_sifive_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int pwm_sifive_clock_notifier(struct notifier_block *nb,
|
|
unsigned long event, void *data)
|
|
{
|
|
struct clk_notifier_data *ndata = data;
|
|
struct pwm_sifive_ddata *ddata =
|
|
container_of(nb, struct pwm_sifive_ddata, notifier);
|
|
|
|
if (event == POST_RATE_CHANGE)
|
|
pwm_sifive_update_clock(ddata, ndata->new_rate);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static int pwm_sifive_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pwm_sifive_ddata *ddata;
|
|
struct pwm_chip *chip;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (!ddata)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&ddata->lock);
|
|
chip = &ddata->chip;
|
|
chip->dev = dev;
|
|
chip->ops = &pwm_sifive_ops;
|
|
chip->of_xlate = of_pwm_xlate_with_flags;
|
|
chip->of_pwm_n_cells = 3;
|
|
chip->base = -1;
|
|
chip->npwm = 4;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ddata->regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ddata->regs))
|
|
return PTR_ERR(ddata->regs);
|
|
|
|
ddata->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(ddata->clk))
|
|
return dev_err_probe(dev, PTR_ERR(ddata->clk),
|
|
"Unable to find controller clock\n");
|
|
|
|
ret = clk_prepare_enable(ddata->clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock for pwm: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Watch for changes to underlying clock frequency */
|
|
ddata->notifier.notifier_call = pwm_sifive_clock_notifier;
|
|
ret = clk_notifier_register(ddata->clk, &ddata->notifier);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register clock notifier: %d\n", ret);
|
|
goto disable_clk;
|
|
}
|
|
|
|
ret = pwmchip_add(chip);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot register PWM: %d\n", ret);
|
|
goto unregister_clk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ddata);
|
|
dev_dbg(dev, "SiFive PWM chip registered %d PWMs\n", chip->npwm);
|
|
|
|
return 0;
|
|
|
|
unregister_clk:
|
|
clk_notifier_unregister(ddata->clk, &ddata->notifier);
|
|
disable_clk:
|
|
clk_disable_unprepare(ddata->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pwm_sifive_remove(struct platform_device *dev)
|
|
{
|
|
struct pwm_sifive_ddata *ddata = platform_get_drvdata(dev);
|
|
bool is_enabled = false;
|
|
struct pwm_device *pwm;
|
|
int ret, ch;
|
|
|
|
for (ch = 0; ch < ddata->chip.npwm; ch++) {
|
|
pwm = &ddata->chip.pwms[ch];
|
|
if (pwm->state.enabled) {
|
|
is_enabled = true;
|
|
break;
|
|
}
|
|
}
|
|
if (is_enabled)
|
|
clk_disable(ddata->clk);
|
|
|
|
clk_disable_unprepare(ddata->clk);
|
|
ret = pwmchip_remove(&ddata->chip);
|
|
clk_notifier_unregister(ddata->clk, &ddata->notifier);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id pwm_sifive_of_match[] = {
|
|
{ .compatible = "sifive,pwm0" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pwm_sifive_of_match);
|
|
|
|
static struct platform_driver pwm_sifive_driver = {
|
|
.probe = pwm_sifive_probe,
|
|
.remove = pwm_sifive_remove,
|
|
.driver = {
|
|
.name = "pwm-sifive",
|
|
.of_match_table = pwm_sifive_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(pwm_sifive_driver);
|
|
|
|
MODULE_DESCRIPTION("SiFive PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|